The two conflicts are both places where upstream landed on top of IDEX/IQEX
code. In GCode.cpp the relocated file header block meets the IMEX placeholder
block, and the placeholders are set first: file_start_gcode is processed through
the placeholder parser now, which throws on a name it does not know, so a script
naming {imex_mode} would abort the export if the header ran first. In
test_multifilament.cpp both sides appended a case at the end of the file.
G-code generation collects errors raised per object, such as an empty
first layer, into one SlicingErrors exception whose own message is just
"Errors". The CLI's generic handler printed that word and recorded the
generic slicing error text, so a headless caller had nothing to act on.
Let Print render the per-object messages with each object's name, and have
the CLI catch SlicingErrors ahead of the generic handler, print that text
and record it as the result's error string. The exit code is unchanged. A
unit test lifts a cube off the bed and checks the message names the object.
Four files overlapped, and each resolution favours upstream where the two sides
had done the same work:
WipeTower's M104/M109 tool qualifier. Both sides bounds-checked the physical
extruder map lookup; upstream omits the T qualifier when the map cannot answer,
where this branch fell back to the logical index and so named a carriage that may
not be the one printing. Upstream's behaviour is what this branch documents
elsewhere, so its version is taken and the local helper is dropped.
get_extruders' mixed-slot switch. Upstream added the same concept to the CLI
overload as expand_mixed_slots, so the GUI overloads' parameter is renamed to
match rather than carrying two names for one idea.
GLCanvas3D's sequential-clearance branch gains upstream's
update_compacted_wipe_tower_clearance for the by-layer case.
The printer_agent re-sync in TabPrinter::reload_config was upstream's and their
preset-undo fix removed it, so it goes; the IMEX modes grid re-sync beside it
stays, since it spans three options and is not a Field.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The clamps and validation work from estimates. Once the tower is
generated, _make_wipe_tower re-tests the exact first-layer footprint,
brim and cone base included, against the printable area and the
exclusion zone, so an off-plate tower fails with a clear error instead
of exporting unprintable G-code. The rectangle-wall mesh footprint
learns the Type2 cone base so that check and the post-generation
validation see the real outline.
Pre-generation, validation hard-checks the body plus an explicit brim
and warns on the estimated auto brim and cone base with the existing
"may collide" strings, so the user hears about a marginal position on
the first slice rather than only at generation time.
Two fff_print fixtures that print a tower at the default position move
it onto the 200 mm test bed, as the multifilament fixtures already do:
the shipped default y of 220 is off that bed, and the backstop now says
so instead of exporting the tower.
A raft is not a reason to reserve a tower. Print::apply runs
normalize_fdm_2, which clears enable_prime_tower for a plate that purges
one filament unless smooth timelapse or wrapping detection is on, so a
single-filament plate with a raft prints no tower at all and the estimate
was reserving bed area for one. Drop the input; need_wipe_tower is now
exactly the two exceptions normalize_fdm_2 honours, named there so the
next reason added has to be checked against it.
The GUI preview and the validation containment check each re-derived
"is a tower printed here" from the filament count instead of reading the
estimate, so both missed the towers printed with no tool change to purge
for. They now take the answer from the footprint, which is the drift this
shared estimate exists to remove. A tower that is not printed estimates to
zero, so its hull is degenerate and every check on it passes trivially -
the containment check needs no gate of its own.
WipeTowerData::width was written only by the pre-generation estimate and
left at zero for the whole post-generation life of the Print, while its
neighbour depth held the real value. Set it from the generator in both
branches.
The plate's height scan transformed every model part's full mesh per
instance on each scene reload, discarding all but the z extent. The
cached convex hull has the same z extent.
A plate loaded from a sliced .gcode.3mf holds no objects and its filaments
live in slice_filaments_info; the config-taking get_extruders overload
returned an empty list for it, which sized the tower for a placeholder two
filaments. It now answers the way the wx overload does, without reaching
the plater.
Also drop estimate_wipe_tower_size, which has no callers.
Closes review comment 11, and fixes a worse bug found while doing so.
The offset was only ever pushed from PartPlate::refresh_imex_slice_offset(),
reachable from update_slice_context() and the plater -- both GUI-only, and it
dereferences wxGetApp(). A headless slice therefore kept Vec2d::Zero(), so
orca-slicer --slice on a plate with imex_firmware_managed_zones emitted
slicer-managed coordinates while the firmware applied its own offsets on top.
Print::update_imex_slice_offset() now derives it from the applied config and runs
from process() and export_gcode(), so a CLI slice gets the value a GUI slice does.
It reads m_full_print_config rather than m_config because imex_tool_layout and
imex_carriage_margin are printer-preset options with no member in the static
PrintConfig, and it takes the mode from the same place GCode.cpp resolves it, so
the shift cannot disagree with the mode that is emitted.
The GUI push and Print::set_imex_slice_offset() are deleted rather than kept as an
override, because the two did not agree. calc_imex_zones() divides
get_extents(m_shape), and set_shape translates m_shape by the plate position, so
the pushed offset carried the plate origin -- which translate_to_print_space() and
the writer offset already subtract. Plate 1 sits at the origin and agreed by
accident; every later plate had the origin subtracted twice and was shifted by a
full plate stride. Not silent, either: the displaced geometry fell outside the
printable area, so slicing plate 2 failed validation with "part is off the plate".
Confirmed fixed on hardware profiles -- the same model on plates 1 and 2 now emits
identical extents.
Deleting the push also removes the post-apply ordering constraint that forced the
duplicate call in Plater::priv::update_background_process: the value is computed
at the point of use, and process()/export_gcode() are structurally after apply().
Also routes validate()'s primary-routing check through imex_resolve_routing() so
the hard block and the plater's warning cannot describe a plate differently
(review comment 20), and through find_imex_mode() for the mode lookup (18).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Brings in 54 upstream commits, the bulk of them the BambuStudio-ported color
mixing / mixed filament subsystem (#15347) plus its follow-ups, along with the
Assimp-backed colored OBJ import, warning-policy build changes, and assorted
profile and localization updates.
Two conflicts, both "each side added at the same point", resolved by keeping
both:
- Print::validate() -- our IMEX multi-color block and upstream's new gradient
mixed filament warning were inserted at the same spot after the empty
extruders check. They test unrelated conditions, so both are kept, each with
its own closing brace.
- tests/libslic3r/test_3mf.cpp -- our three IMEX per-plate round-trip scenarios
and upstream's mixed-filament round-trip scenario both append to the end of
the file, and each side added one include. All four scenarios and both
includes are kept.
Everything else merged cleanly, including GCode.cpp, ToolOrdering.cpp,
PartPlate.cpp and PrintConfig.cpp. Upstream left the is_extruder_used block
untouched, so the IMEX supplement still applies, and estimate_wipe_tower_polygon
is unchanged, so the prime tower hull work is unaffected.
Not addressed here, and worth its own change: a mixed filament is a virtual slot
that no nozzle carries, while physical_extruder_map routes logical slots to
physical heads. Print::extruders() lists mixed slots under their own id whereas
tool_ordering.all_extruders() lists them post-expansion, so the IMEX pem lookups
have no defined answer for a mixed slot. Upstream's own guards reject a mixed
filament where a physical slot is required; IMEX likely wants the same.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
# Description
This PR ports the color mixing feature from BambuStudio.
The port is based on the previous work by @ianalexis in #15231.
This PR completes the port and fixes various bugs.
Several improvements were also made during the porting process.
WIP
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
* chore: mark every declaration that overrides a base virtual
clang-cl reports 42 member functions across 28 files that override a
base virtual without being marked `override`, inside classes that
already mark their other overrides. That is every occurrence of
-Winconsistent-missing-override in the tree, so the category drops to
zero and -Werror=inconsistent-missing-override becomes available as a
guard against it coming back.
Behaviour is unchanged. Each keyword goes only where clang had already
resolved the declaration to a base virtual, so it records what the
compiler already worked out and cannot affect overload resolution or
dispatch. If any of these signatures had not really overridden a base
method, the build would have failed rather than warned.
Where a declaration already carried `virtual` it is left alone and the
keyword appended, matching the surrounding declarations. Plain
`override` is used rather than the wxWidgets `wxOVERRIDE` macro, which
wx/defs.h defines as `override` beneath a comment marking it obsolete,
and which the rest of src/slic3r already avoids by 1742 occurrences to
113.
A full clang-cl build takes -Winconsistent-missing-override from 1,146
warning lines to 0. Those 42 declarations produce that many lines
because a header is re-diagnosed in every translation unit that
includes it. CalibrationWizardStartPage.hpp alone accounts for 336 of
them from 4 declarations.
* chore: drop unused lambda captures in GUI/Widgets
clang-cl reports 10 lambda captures in src/slic3r/GUI/Widgets that are
never read. Removing them changes nothing at runtime.
Every capture removed is `this` or a raw pointer. clang does not report
a capture whose type has a non-trivial destructor, since such a capture
can be held purely for its effect on an object's lifetime, so nothing
that owns or extends a lifetime is touched. The std::weak_ptr captured
beside the removed `this` in MultiNozzleSync.cpp stays.
This clears the category in GUI/Widgets only. A full clang-cl build
takes -Wunused-lambda-capture from 312 warning lines to 302, leaving
235 sites in other directories for a follow-up.
Resolved 4 conflicts:
- PrintConfig.hpp / Preset.cpp: upstream restored calib_flowrate_topinfill_special_order
(removed in the prior merge, now re-added and re-registered); kept it alongside our
IMEX options (imex_parallel_mode, imex_head_filament_map).
- Plater.cpp: kept our <sstream> include plus upstream's <optional> and plugin includes.
- tests/fff_print/test_gcodewriter.cpp: both sides appended disjoint scenarios after a
shared base. Reconstructed as upstream's full file (base + its 3 toolchange/H2C
scenarios + the boost/filesystem include its helper needs) followed by our 10
set_pressure_advance / set_temperature scenarios. 22 scenarios total, no duplicates.
Resolve five conflicts, all of which needed both sides rather than a pick:
- BackgroundSlicingProcess: ours was a pure tabs->spaces reformat of base, so
keep main's per-filament volume/nozzle map read-back (its only change here).
- GUI_App: main's #12506 else-if attached to an `if` this branch deleted;
re-expressed onto the same-agent early-return path (the agent factory caches
per id, so pointer equality is the same predicate).
- MainFrame: both sides relocated Sync Presets independently; keep main's
push_notification plus the branch's Plugins menu items.
- Tab: the "TODO: Orca: Support hybrid" blocks were unchanged base, not a branch
decision; take main's enabled Hybrid to match the already auto-merged siblings.
- test_config: union of both sides' cases (6 plugin + 9 multi-nozzle).
# Description
Adds a --slice (-s) mode to the profile validator that slices a
two-colour cube through every shipped printer, expanding all custom
g-code (change_filament_gcode, machine start/end, etc.). This catches
invalid-placeholder / bad-flow / slicing errors that the static JSON
checks and unit tests can't see.
Included:
- Validator: new -s sweep mode; per-profile error attribution in the
log; resolves the synthetic 2nd-filament nozzle-mapping so multi-nozzle
BBL printers (incl. the Direct-Drive+Bowden X2D) validate cleanly.
- CI, two complementary paths:
- check_profiles.yml — runs the sweep on profile-only PRs (nightly
binary).
- build_all.yml — new parallel slice_check_linux job runs it on
engine/src PRs with the PR-built binary (build_all doesn't trigger on
resources/**, so no overlap). Runs off the build's artifact, so it
doesn't lengthen the build leg.
- Profile fixes surfaced by the sweep: Creality, FLSun, Ginger, Qidi,
RatRig, iQ.
- Engine: whitelist BBL firmware T-opcodes (T1001/T65279/T65535) in the
time estimator (log-only, no g-code change); dedupe a
per-filament/per-layer log flood in get_config_index.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The new "Prime-tower visits..." test from #14685 (H2C/A2L support) throws
"Coordinate outside allowed range" at random on CI, on both Windows arm64 and
Linux x86_64. It's an uninitialized read of WipeTowerData::height.
#10780 (H2D/H2S) added a second wipe tower path, generate_new(), that fills in
depth, bbx, brim_width and rib_offset but not height. The older generate() sets
height, and clear() never did, so on the generate_new path it stays garbage.
first_layer_wipe_tower_corners() passes height to get_wipe_tower_cone_base() as
R = tan(cone_angle/2) * height. The stray bytes are usually zero, so R is zero
and the slice is fine, which is why it passes most runs on every platform. When
they aren't zero the cone radius runs past ClipperLib's limit and the slice
throws. Nothing selects for it, so it just flakes around.
#14685's test is the first to exercise this path, so that's when it started
showing up.
Initializing height in clear() fixes it, same as the m_origin fix in #13712. The
BBL generate_new path has no stabilization cone, so height = 0 is right.
Conflicts were all co-located additions rather than design collisions:
- GCode.cpp: adopt upstream's toolchange(filament_id, nozzle_id) signature and
per-variant set_config_index() while keeping the IMEX bare-T<n> suppression;
rebase the second-layer temperature loop's non-IMEX branch onto upstream's
get_filament_config_index() resolution.
- Preset.cpp / PresetBundle.cpp / PrintConfig.cpp: keep both sides' option-list
and enum-map entries.
- GLCanvas3D.cpp: upstream's printable_heights argument plus the IMEX ghost pass.
- PartPlate.cpp: keep <set> (still used).
- test_gcodewriter.cpp / test_3mf.cpp: keep both sides' test cases.
Resolves two conflicts:
- GLCanvas3D.hpp: keep both the IMEX ghost render declarations and
upstream's _render_wireframe_overlay().
- test_gcodewriter.cpp: both sides appended test cases to the same
region; keep upstream's origin/machine-limit tests alongside the
pressure-advance and temperature scenarios.
When the per-layer filament selector (enable_filament_dynamic_map)
migrates a filament across nozzle variants (e.g. Standard -> High Flow),
the config write-back only stored the derived extruder map; every
per-variant filament value (retraction, nozzle temperature, flow,
flush...) kept the numbers resolved from the pre-slice static mapping.
Now both dynamic write-back sites (the by-layer branch and the
sequential stitch) branch on the result's dynamic support. Migrating
results run a mixed-filament expansion that regathers every
filament_options_with_variant key from the pristine per-variant
superset, giving a migrating filament one config slot per (extruder
type x nozzle volume type) it lands on - filament_self_index,
filament_extruder_variant, and all value arrays grow in lockstep - and
recompute the retract overrides with per-slot machine indices so a nil
slot falls back to its own variant's machine value. Non-migrating
dynamic results take the merged three-map write-back so re-applies
reproduce from the written maps. Unrouted filaments resolve from the
result's own default map, so slot resolution never depends on
filament_map round-tripping through the plate config.
Print::apply reproduces the identical expansion from the persisted
group result (shared dedupe helper, expansion function, and slot
indices on both sides): the expanded keys sit in the psWipeTower /
psGCodeExport invalidate lists, so without the reproduction every
re-apply after a selector slice would diff non-empty and permanently
invalidate. cal_non_support_filaments now resolves the extruder per
layer from the published result for dynamic groupings.
filament_map_2 keeps its apply-time static derivation; nothing on the
dynamic path reads it (the per-slot machine indices key the override
merge), and per-(extruder x volume-type) machine limits in the g-code
processor remain a documented follow-up.
Every change is gated behind is_dynamic_group_reorder() or a persisted
result with dynamic support; no profile sets the flag, so the static
fleet's instruction stream is unchanged (20/20 pinned-slice byte gate
identical, incl. the sequential repro sliced twice, deterministic).
Tests: expansion unit coverage (migrating slots, unrouted fallback via
the default map, mis-sized volume map ignored, nullable retract keys in
lockstep, slot machine index layout), an end-to-end stub-driven
write-back asserting expanded slots, per-layer config-index resolution,
the override merge incl. the nil-slot variant fallback, and re-apply
stability, plus a real selector slice staying valid across re-apply.
Suites green (libslic3r 48987/168, fff_print 633/60).
Sequential (by-object) prints were incoherent with the per-layer filament
selector (enable_filament_dynamic_map): the by-object branch published a
static grouping while each per-object ToolOrdering independently ran the
dynamic planner from an empty nozzle status and wrote its own map to the
config (one write per object, last object wins). The exported toolchange
sequences then disagreed with the published result that drives the
per-layer maps, placeholders, and selector emission.
Now the by-object branch, when the selector is enabled, plans each unique
object once — threading the physical nozzle occupancy and the previous
object's last filament into the next plan — stitches the per-object
per-layer nozzle maps into one print-wide result (gap-filled by the new
normalize_nozzle_map_per_layer so any layer index resolves a filament's
nozzle consistently), publishes it, and writes the derived extruder map
back once. The plans are cached on the Print and g-code export consumes
the cache: the ToolOrdering seed changes the plan input (dontcare
assignment, first-layer reorder), so a fresh export-time construction
could re-plan differently from the published stitch. The per-object
dynamic write-back is gated off for sequential prints.
Every change is gated behind is_dynamic_group_reorder(); no profile sets
the flag, so the static fleet's instruction stream is unchanged (20/20
pinned-slice byte gate identical, incl. the by-object repro sliced twice).
Tests: normalize unit coverage (carry-forward, back-fill, ragged input),
stitched-blocks selector detection, and an end-to-end by-object selector
slice (apply -> process -> export) asserting the published stitched
result, one cached plan per object, the config write-back, and a clean
export. Suites green (libslic3r 48958/165, fff_print 633/60).
* ENH: config: add logic to apply params to object/region config with multi-extruder
JIRA: no-jira
Change-Id: Ieab98cd8d031e5ca82a3aad2d0b89d8ae4a794f1
(cherry picked from commit 3179fd416e68ca8bc2d746f859508d07db18fe5b)
* FIX: X1C switch to H2D lose Highflow parameter
Jira: STUDIO-15272
Change-Id: Id8cf5d93a49d5542ac82f9554974b458e15c1193
(cherry picked from commit 15d9f072ff658a3beb4f916d978dfea12c2d9f16)
* Fix mishandling of `stride` param and add unit test for it
* Fix modified multi-variant per-obj option highlight
* Fix issue that per-obj FloatsOrPercents options are marked as dirty incorrectly when lost focus
---------
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: weiting.ji <weiting.ji@bambulab.com>
- Print::update_filament_maps_to_config takes filament/volume/nozzle
maps, backfills an empty volume map from extruder types, rebuilds
filament_map_2, re-expands the per-filament variant arrays, and
recomputes retract overrides keyed by resolved slots
- grouping writes its result back in every non-sequential mode;
manual multi-nozzle grouping validates the user mapping and raises a
translatable error on deviation; the engine's concrete volume
assignment is deliberately not merged yet (per-filament arrays are
already consumed by filament id, so materializing High Flow now
would change motion before the layer-aware resolvers land)
- Print::apply treats the three map keys as engine outputs in auto
modes (erased from the diff and adopted), compares them against used
filaments in manual mode, and keeps the pre-expansion snapshot in
sync with the late normalization pass so rebuilt headers reflect the
sliced state instead of resurrecting stale values
- volume/nozzle maps and extruder_nozzle_stats join the invalidation
group of filament_map (wipe tower + skirt/brim)
- PresetBundle composes full configs with an optional per-filament
volume map (plate map, else defaults derived from each extruder's
flow type); project config keeps the map sized across filament
count changes
- PartPlate stores per-plate volume/nozzle maps; Plater injects them
at every slice-composition site (incl. g-code reload and wipe-tower
estimation); BackgroundSlicingProcess reads engine results back to
the plate in auto modes
- per-filament map trust guards relaxed to size-match everywhere now
that every producer sizes the map; single-filament explicit flow
assignments are honored
- tests: grouping volume maps stay concrete, merge semantics of
update_used_filament_values, single-filament override honoring
Motion g-code is byte-identical fleet-wide including Hybrid projects
(19-fixture gate + repro determinism double-slice). Header deltas:
the map keys now dump real values, and stale pre-normalization values
(e.g. enable_prime_tower on single-used-filament prints) no longer
leak into the config block.
Review the slicing-pipeline plugin comments for context a reader of the source
alone cannot follow, and rewrite them to stand on their own:
- drop pointers to uncommitted design/plan material ("§3.6 (Twistify design)",
"the brief's note", "Fix 4(a)/4(b)")
- fix dangling references to code this branch removed: the retired set_slices()
and view mutators, the former G-code post-processing capability/trampoline,
the "Post-processing" capability family, the pre-refactor array helper
- drop "v1"/"in v1" phase labels, keeping the behavior they described
- correct stale cross-references: Twistify.py -> the real sample path;
test_plugin_host_api.cpp:32-40 -> import_orca_module in python_test_support.hpp;
"the binding"/"graphs above" -> the named source
Comment/string-only; no code behavior change.
- Print::get_nozzle_config_index / get_filament_config_indx resolve a
filament's variant slot per layer from the nozzle group result, with
hashed index caches; when no group result is published (sequential
prints), they fall back to the static filament->extruder mapping so
behavior is unchanged
- filament_map_2 caches each filament's resolved print-variant slot;
rebuilt in Print::apply after the filament_map diff handling and in
the filament-map write-back
- filament retract overrides now key by slot indices: apply_override
fallback indexing flips to 0-based, Print::apply passes
filament_map/extruder indices, the write-back passes filament_map_2
(identical resolution while slots equal extruders)
- filament_volume_map/filament_nozzle_map/filament_map_2/
filament_self_index become PrintConfig static members (required for
member access); grouping input guards tightened so their registered
1-element defaults are never mistaken for real per-filament maps
(single-filament manual mode keeps the mix-marker fallback)
- update_filament_self_index_cache refreshed at every full-config
assignment
- tests: 0-based apply_override fallback, get_config_index_base
hit/miss/mixed-type cases
The resolvers are not consumed by the g-code writer yet. Non-Hybrid
g-code is unchanged except the config header, which now serializes the
three new static keys (defaults until the per-filament producer lands);
verified by the 19-fixture byte gate: 3 added header lines per fixture,
zero motion changes.
G-code post-processing is now a step of the slicing-pipeline plugin rather than a
separate capability type. One capability class can transform slices at the geometry
seams AND edit the final G-code, behind a single picker/option.
- Add SlicingPipelineStepPlugin::psGCodePostProcess (bound as
orca.slicing.Step.psGCodePostProcess). Unlike the geometry steps it fires from the
GUI export path in PostProcessor.cpp, not from Print::process(): ctx.print/ctx.object
are None and the plugin edits the file at ctx.gcode_path in place. It may run more
than once per slice (file export and/or upload) and its output is not shown in the
preview.
- Extend SlicingPipelineContext with gcode_path/host/output_name and a C++-only
full_config; config_value() falls back to it when there is no live Print.
- PostProcessor.cpp dispatches SlicingPipelinePluginCapability at psGCodePostProcess,
driven by the existing slicing_pipeline_plugin option.
- The exported G-code lives outside data_dir(), so the plugin audit sandbox would
block the write; the trampoline's audit setup grants ctx.gcode_path's folder as a
scoped allowed root, gated on a non-empty gcode_path so the geometry-step hooks gain
no extra filesystem access.
BREAKING CHANGE: the separate G-code post-processing capability type is removed.
- orca.gcode.GCodePluginCapabilityBase and orca.PluginType.PostProcessing are gone;
post-processing plugins migrate to orca.slicing.SlicingPipelineCapabilityBase +
Step.psGCodePostProcess (and gain ctx.params / ctx.config_value()).
- The post_process_plugin config option is removed; use slicing_pipeline_plugin.
Presets carrying the old key degrade to the standard unknown-key warning.
- Manifest type = "post-processing" now maps to Unknown (advisory only; the loader
dispatches on the C++ get_type()).
Also repairs two latent build breaks the branch carried: stale Step enum value usages
in test_slicing_pipeline_hook.cpp and a reference to the removed
ConfigOptionDef::PluginType::None in Tab::on_value_change (now is_plugin_backed()).
Adds the orca_gcode_stamp sample plugin and a psGCodePostProcess binding test.
Filament grouping already consumed per-filament forbidden nozzle volume
types, but every call site passed an empty map, so a variant-restricted
filament (e.g. one limited to "Direct Drive TPU High Flow") could be
auto-grouped onto an incompatible nozzle flow type on multi-variant
printers.
- add convert_to_nvt_type() to parse extruder variant strings
- add Print::get_filament_unprintable_flow(): forbidden volume types =
printer extruder variants minus the filament's declared variants;
filaments declaring no variants stay unrestricted
- feed the map into grouping at the by-object path (Print.cpp) and all
six mapping/planning sites in reorder_extruders_for_minimum_flush_volume
- unit-test the string parser
Non-restricted configurations produce an empty map, so existing
printers' grouping and g-code are unchanged.
Adds PluginHostSlicing, which registers the print-graph data model (Print,
PrintObject, Layer, LayerRegion, Surface, ExPolygon, extrusions, ...) into the
orca.host submodule in the same raw-class style as PluginHostApi's Model/Preset
graph, with shared helpers in PluginBindingUtils. SlicingPipelinePluginCapability
is trimmed to the capability surface (the standalone SlicingNumpy helper is folded
away). Adds the Twistify example plugin next to Inset and broadens the binding,
hook, and plugin-install tests.
* fix: initialize Print::m_isBBLPrinter
Built outside the GUI/CLI (headless tests, embedded use) the member was read
uninitialized: is_BBL_printer()/wipe_tower_type() feed it into ToolOrdering,
which then non-deterministically dropped per-feature filament assignments.
Default it to false, the value the GUI and CLI already assign for non-Bambu
printers.
* docs(test): add the fff_print testing contract
tests/fff_print/README.md codifies how the suite is organized: one file per
subsystem (each owning both in-memory and emitted-G-code assertions), flat
behavioral test names with a single [Subsystem] tag, a robust-tests guide,
the shared helpers, and an add-a-test checklist. Linked from tests/CLAUDE.md.
* test(fff_print): reorganize the suite to the contract and add coverage
Bring every subsystem into one file per the README: rename the test_data
harness to test_helpers; consolidate skirt/brim; split multi-filament and
cooling into their own files; disperse the test_printgcode grab-bag and the
end-to-end smoke scenario into focused tests; fold test_gcode into
test_gcodewriter. Standardize names and tags, align cube tests on the cube()
helper, and de-qualify the flagship files.
New coverage: multi-filament per-feature and per-object routing; a skirt/brim
behavior matrix (the #14333 rework, including brim ears, with regression
coverage for #14319 and #14366); resolved extrusion-width and config
comments; custom-G-code placeholders; fan control and speed-marker
consumption.
Re-enable three slice tests previously tagged [NotWorking]: the clipper
"Coordinate outside allowed range" error that disabled them was specific to a
past CI runner environment and no longer reproduces.
* test(fff_print): tag arm64-flaky skirt/brim tests NotWorking
Four skirt/brim slice tests intermittently throw ClipperLib's "Coordinate
outside allowed range" on the macOS and Windows arm64 CI toolchains (an FP
divergence, not a slicing bug; see PR #14207). Linux x86_64 and aarch64 are
unaffected. Tag them [NotWorking] so ctest -LE NotWorking skips them.
* test(fff_print): re-enable the arm64 skirt/brim tests
These were tagged [NotWorking] as a stopgap when myfork's daily-driver build
combined them with the cross-platform CI on a base that predated upstream's
m_origin fix (99dea01cc3). With upstream merged in, Print::m_origin is
initialized and the "Coordinate outside allowed range" throw is gone, so the
tests pass on macOS/Windows arm64. Drop the tags.
Introduces a plugin capability that runs Python at the seams of Print::process(),
letting a plugin read and rewrite slicing state as it is computed.
- New slicing_pipeline_plugin config option; selected plugin refs are serialized
into the print manifest.
- Print gains an injectable hook fired at each pipeline step (posSlice,
posPerimeters, posInfill, ...). It is a no-op when unset, fires only on genuine
(re)computation, and never on the use-cache path.
- orca.slicing submodule: SlicingPipelineCapabilityBase plus a trampoline and a
Step enum. Capabilities read the live graph through zero-copy int64 numpy views
(contour/holes geometry with unscaled coordinates, flattened toolpath data) and
edit it through 2D-geometry mutators with cache-invariant refresh.
- GUI dispatcher runs capabilities during slicing under the GIL, turns plugin
errors into slicing errors, honors cancellation, and adds the plugin picker.
- Ships the InsetEverySlice sample plugin and binding/hook tests.
Catches the iXex/IDEX branch up to upstream main (44 commits). One
content conflict resolved:
- src/libslic3r/Print.hpp: kept upstream's default-initialized
m_origin {0,0,0} alongside our m_imex_slice_offset member.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Catches the iXex/IDEX parallel-printing branch up to upstream main
(102 commits). Two content conflicts resolved:
- src/libslic3r/Preset.cpp: s_Preset_printer_options — kept upstream's
new "use_3mf" key and our iMEX printer-capability/mode keys.
- tests/fff_print/test_gcodewriter.cpp: upstream revived the disabled
suite (#14196), dropping the obsolete [.]-tagged lift() test and its
config_lift_unlift.ini; kept their set_speed + z_hop tests and appended
our 10 per-firmware set_pressure_advance/set_temperature scenarios.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Refactor skirt and brim ownership and emission flow
Refactor skirt and brim generation around a common object/group
ownership model.
Skirts and brims are now emitted as a coordinated preamble
(skirt -> brim -> object) instead of being generated and emitted
through multiple independent code paths.
Changes:
- Fix repeated skirt emission caused by the previous skirt state
tracking logic.
- Restore local skirt/brim ordering for per-object skirts in
By Layer mode.
- Emit brims together with their owning object or object group.
- Handle combined brims independently from skirt grouping.
- Handle draft shields through the same ownership model as skirts.
- Fix draft shield generation when skirt height is zero.
- Generate draft shields after brim geometry is known, preventing
draft shields from overlapping brims.
- Reject unsafe grouped per-object skirt configurations in
By Object mode.
- Remove legacy skirt emission paths and state-management
workarounds.
Support brim generation remains unchanged.
Co-authored-by: SoftFever <softfeverever@gmail.com>
Adds the `imex_firmware_managed_zones` printer-config key (default off) for
IDEX/IQEX printers whose firmware applies its own copy/mirror offsets in
non-primary modes (e.g. RepRapFirmware IDEX duplication mode, Flashforge
Creator Pro 2/3 Pro). For these printers the slicer needs to emit a single
centered slice at bed origin and let the firmware fan toolheads out from there;
the previous slicer-managed iMEX rendering would draw a print at the primary
zone's world position (off-bed for the firmware-fan-out paradigm).
When the flag is on and the active mode is non-primary, the slicer subtracts
the primary zone's plate-local center from the gcode emission frame. The
writer offset is augmented but the gcode-processor offset stays at plate_origin
so the gcode-preview visualizer renders the centered slice at the bed center
rather than at the prepare-view zone placement. translate_to_print_space is
augmented too so first_layer_print_min/max placeholders (consumed by user
start_gcode like Felix's M118 header) reflect the centered frame.
Slice handoff lives in PartPlate::refresh_imex_slice_offset, called from both
update_slice_context (plate switch) and Plater::priv::update_background_process
(every-slice path — reslice() goes through here with switch_print=false so the
plate-switch hook alone wouldn't fire on mode toggle).
calc_imex_ghosts early-returns in firmware-managed mode: the existing
imex_head_transform math places ghosts at primary_zone_center + gantry_offset
(slicer-managed semantics), which renders off-bed when the toolpath is being
emitted in a centered frame. Proper firmware-managed ghost rendering (showing
where copies/mirrors will actually print after firmware fan-out) is deferred.
When the flag is off, all the new code paths reduce to no-ops byte-identical to
prior behavior. Layer 1 unit tests in test_imex_helpers cover every gating path
of compute_imex_slice_offset; full ctest suite passes (247/247).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Make filament compatibility temperature-aware
Extend filament compatibility checks to consider actual nozzle temperatures and temperature ranges.
Print::check_multi_filaments_compatibility now accepts nozzle temperatures and range lows/highs; it resolves missing ranges from material defaults, computes per-filament effective temperatures, and checks pairwise compatibility (including high/low/mid mixed cases).
Updated callers in Print::check_multi_filament_valid and CalibrationWizardPresetPage to pass nozzle settings, consolidated user-facing warning strings, and fixed extruder index handling and minor logic/path improvements.
Clarify incompatible nozzle temperature warnings
* Update Print.cpp
* Remove json usage
* Reduce messages
Clifford Garwood