* build: enable /Zc:lambda for MSVC
MSVC keeps its legacy lambda processor under /std:c++17, which rejects
reading a constexpr constant inside a lambda that does not capture it
(C3493). No other compiler requires that capture, and clang reports it as
an unused one, so the two cannot both be satisfied without the flag.
/Zc:lambda selects the conforming lambda parser that clang and GCC
already use. It is implied by /std:c++20 and /permissive-, so it is only
needed while we are on C++17. clang-cl is conforming already and does not
take the flag.
It requires VS2019 16.8, so build_release_vs.bat now says 16.8+.
* build: clear 237 unused lambda capture warnings
236 captures across 81 files, 142 of them `this`. Removing an unused
capture changes no behavior; clang does not report a capture whose type
has a non-trivial destructor, so nothing held only to extend an object's
lifetime is in this set.
Nine of them are the second half of the warning, "is not required to be
captured for this use", where the capture is a const or constexpr value
the body does read. Those depend on the /Zc:lambda change in the previous
commit. One of them, in FillRectilinear.cpp, had been worked around with
an #ifndef __APPLE__ guard around the capture list, which is now gone.
GUI_ObjectTableSettings.cpp captured its reset button only to read it
inside #ifdef __WXOSX_MAC__. That branch now takes the button from the
event it is already handling.
* build: fail configure on MSVC older than 19.28 instead of dropping /Zc:lambda
cl.exe answers an unrecognized /Zc: sub-option with warning D9002 and keeps
going, so on VS2019 before 16.8 the flag is silently ignored and the build
instead dies with C3493 in FillRectilinear.cpp, nowhere near the cause.
* fix: delete three locals that are now unused
Their only remaining use was the lambda capture this branch removed. The
Clang builds set -Wno-unused-variable, so the build never flagged them.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
These dialogs treated a filament with no compatible_printers as compatible with
nothing, while the rest of the app treats it as compatible with everything, so
the entire Orca Filament Library was missing from the AMS material and
calibration filament lists. They now resolve compatibility the same way the
plater does, and a vendor profile still supersedes the library generic of the
same name.
Validate mixed-filament definitions during the published material pass: definitions whose components reference slots that do not exist or hold other mixed filaments, or that carry fewer than two components, are reported through the shared skipped_keys channel instead of shipping a mix the GUI integrity check would only flag later.
Fix the slot-limit exhaustion report being silently dropped: it wrote to published_config->skipped_keys, which the pass's final move-assignment from the local vector clobbers. All rejections now go through the local.
Remove the unreachable persist branch from add_detached_preset: no caller passes save_to_project=false, so the parameter is gone and the copy is always project-embedded.
Tests: cover the exhaustion path, the new definition validation, the identity-tier matching matrix (including substitute reporting), the structural-key denylist, whole-vector size-mismatch skips, relocation payload degradation, the "(Published 2)" uniquify chain, mixed blend colours staying out of shared preset configs, and duplicate-slot last-wins. Also fix the legacy-3mf scenario passing vacuously behind an if-guarded assertion. All existing published/3mf tests pass unchanged.
- Publish mixed-filament slots as whole units: serialize the filament_mixed_* definition into project_config on import, grow the receiver's parallel arrays in lockstep, and report unappliable definitions as skipped instead of dropping them silently
- Per-extruder printer selection: one inner tab per extruder, rows keyed by full "#N" ids; single-extruder receivers collapse variants onto their slot (first applied, rest skipped), multi-extruder receivers override element-wise
- New per-slot "Enable" toggle gating what gets published; enabling a mix auto-enables + Full Publishes its components
- Mixed page previews: fixed-size ratio bar, ternary triangle (3 components) and Material Ratio vs Model Height graph (gradients), always visible regardless of Enable
- Tab strip shows full swatch compositions with adjustable spacing; barycentric helpers shared via FilamentBitmapUtils
* Keep mixed-color filaments intact when the extruder count changes
The extruder-count spinner resized the filament arrays in bulk at the tail,
which is where mixed-color slots live, so a new filament landed behind the
mix and the sidebar skipped a slot number. It now adds and removes one slot
at a time through the same calls the sidebar's +/- buttons use, so a new
slot opens ahead of the mixed tail and a removal renumbers object filament
ids, painted facets, custom g-code and mixed components rather than
clamping them away.
Drops the vector overload of set_num_filaments(), which this leaves without
callers.
Brings in 54 upstream commits, the bulk of them the BambuStudio-ported color
mixing / mixed filament subsystem (#15347) plus its follow-ups, along with the
Assimp-backed colored OBJ import, warning-policy build changes, and assorted
profile and localization updates.
Two conflicts, both "each side added at the same point", resolved by keeping
both:
- Print::validate() -- our IMEX multi-color block and upstream's new gradient
mixed filament warning were inserted at the same spot after the empty
extruders check. They test unrelated conditions, so both are kept, each with
its own closing brace.
- tests/libslic3r/test_3mf.cpp -- our three IMEX per-plate round-trip scenarios
and upstream's mixed-filament round-trip scenario both append to the end of
the file, and each side added one include. All four scenarios and both
includes are kept.
Everything else merged cleanly, including GCode.cpp, ToolOrdering.cpp,
PartPlate.cpp and PrintConfig.cpp. Upstream left the is_extruder_used block
untouched, so the IMEX supplement still applies, and estimate_wipe_tower_polygon
is unchanged, so the prime tower hull work is unaffected.
Not addressed here, and worth its own change: a mixed filament is a virtual slot
that no nozzle carries, while physical_extruder_map routes logical slots to
physical heads. Print::extruders() lists mixed slots under their own id whereas
tool_ordering.all_extruders() lists them post-expansion, so the IMEX pem lookups
have no defined answer for a mixed slot. Upstream's own guards reject a mixed
filament where a physical slot is required; IMEX likely wants the same.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Upstream replaced MainFrame's fixed-index TabPosition enum with string-based
page ids ("feat: refactor notebook/tabs to be string based instead of fixed
index based"). The IMEX toolhead-visibility menu item was the only consumer of
that enum left on this branch, so its enable check now compares
m_tabpanel->GetSelectedPageName() against TAB_ID_PREVIEW -- the same form the
neighbouring upstream menu items use.
That mismatch is what broke CI: the branch built on its own, but the merge
commit CI builds no longer had TabPosition declared. No other conflicts.
666/666 tests pass in Release.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add caching system for presets
* Removing user\bundle serialization and keeping it only for system presets
* Integrate caching into WebGuideDialog which speeds up time of SetupWizzard and PrinterSelection dialog
* Add CI\CD step to prepare cache file in ahead of time so user does not need to wait
* Add partial cache generation when only one of the vendros is changed to speed up recalculation time
* Handle corrupted files
* Add cache to GuideDialog as previos version didn't work as expected
* Add inspecting tool and fix CI cache generation
* Generate cache per vendor
* Simplify code by mergin it in PresetBundle
* Simplify code a bit more
* Add cereal serialize() to VendorProfile, PrinterModel, Preset, and Semver
* Remove CachedPrinterModel/VendorProfile/Preset mirror structs from VendorCache
* Fix use-after-free in CallAfter lambda; replace raw thread pointer with unique_ptr
* Use get_vendor_cache_key() to match cache keys written by the app
* Remove BOM added by VSC
* Skip invalid vendors
* Remove leftover cache file
* Fix build for windows arm64
* Revert json cache back
* Update check for stale cache
* Serealize all value fields for Preset class to minimize regression later
* Minimize field duplication by moving Cache thing into PresetBundle
* Add tests for Cache system
* Add a bit more tests
* Merge branch 'main' into feature/cache_profiles_and_optimize_loading_speed
* Rvert from per-verndor to single cache file
Replace N per-vendor .cache files with a single system_presets.cache
that holds all vendors and presets in one serialized blob.
Cache load is now all-or-nothing: on hit all vendors are applied from
the bundle (sub-second); on miss all vendors are parsed from JSON and
a fresh bundle is written to the user cache dir.
Invalidation is driven by bundle_key - a sorted concatenation of all
vendor JSON version strings. Any vendor update invalidates the whole
cache and triggers re-parse on next launch.
Guide wizard (WebGuideDialog) loads the bundled cache into a plain
PresetBundle instead of a separate VendorGuideData struct, removing
the duplicate data model.
generate_system_cache simplified from a per-vendor loop to a single
save_system_presets_cache() call producing one output file.
* Transfer all Preset fields from cache via move assignmet
apply_vendor_preset_group was copying fields manually and missed
bundle_id, user_id, base_id, sync_info, updated_time, key_values,
ini_str. Replace field-by-field copy with move assignment of the
fully-deserialized Preset, then restore the vendor pointer which
is excluded from serialization.
* Ignore cache for future
* Remove not used files
* Ship one preset cache per vendor in place of the profile JSONs
Each vendor's system presets serialize into a single <vendor>.opc built at
package time, and a shipped build carries that file alone — the profile JSON
and its sub-file tree are pruned. The vendor loader, the setup wizard's profile
list and the resource installer all read a vendor through its cache, falling
back to parsing whenever one is absent, stale or unreadable, so the cache stays
an optimization and never a source of truth. Caches hold presets in source form
and resolve inheritance at load, through the same code the JSON path uses.
* Make the preset cache self-describing and load each vendor from the system folder alone
The cached DynamicPrintConfig is keyed by name, through a per-file dictionary of the
distinct opt_keys, the type each was written as, and the distinct enum value names,
instead of by serialization_key_ordinal — a position assigned by declaration order at
static init, where inserting one option shifts every later ordinal and the lookup then
succeeds on the wrong option. Because a name-keyed payload drops the options this build
cannot place rather than being rejected wholesale, the schema fingerprint goes, and with
it the two fallbacks that existed only because an installed cache died on every app
upgrade: the second lookup tier into resources/profiles and the parse fallback to the
same place. A vendor is loaded from <data_dir>/system/ and nowhere else, as on main —
which is what makes the app write its .opc files there again.
* Simplify the preset cache internals after review
* Use the shared temp-dir helper in the preset bundle loading test
* Bound stamp string reads in the preset cache
* Speed up the setup wizard with a profile-data cache
The wizard's per-vendor fast path threw on vendors present only in
resources, falling back to a ~29 s raw JSON scan on every open. Each
vendor now loads from the directory it was found in, and the derived
model/machine/filament/process catalog is cached whole in
<data_dir>/cache/wizard_profile_data.json, stamped by each vendor's
name and version - a fresh cache makes an open one file read, with no
bundle built and no presets installed (~0.2 s vs ~2 s).
* Remove debug SVG dump from a geometry test
* Move the per-vendor cache file format into PresetCacheFormat
* Move the vendor install helpers from PresetBundle into Utils
* rename
* fix flatpak
* change cache version to 1
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Per material slot, the Publish dialog can now embed the entire filament preset ("Full Publish") and require a curated filament type and/or colour:
- On export, full-publish vector options are masked to the author's slot so unrelated slot data never leaks into the published file.
- On load, slots are matched by the published type: a match keeps the receiver's material (full dumps ignored, partial keys applied); a mismatch replaces the slot with the first visible same-type library filament, falling back to a temporary embedded preset or skipped keys when none exists. Required colours apply regardless of the type match.
- The receiver's slot count grows only to the highest published slot.
- Published 3MFs load as a new project: the file's path is not adopted as the project filename, published metadata is stripped from the model, and the file is added to recent projects.
- Notifications list replaced slots, and the edited filament preset is refreshed so applied values surface in the GUI.
- Dialog: "Full Publish" toggle replaces the material opt-in and select-all headers; new Color/Type requirement rows with swatches.
- Add Ctrl+Shift+E shortcut for the Publish dialog (menu, key handling, and the keyboard shortcuts dialog).
- Tests for export slot masking, metadata round-trip, replacement semantics, slot growth, and skipped-key reporting.
Brings in 560 commits (merge base 2026-07-04 .. origin/main af9fd10d7a).
19 conflicts resolved; the other 138 touched files auto-merged.
Conflict resolutions
- Snapmaker/Polymaker (7): main normalised JSON key order in #15039 while this
branch inserted filament_id/filament_vendor. Took main's key order and kept
this branch's values, inserting a single filament_id key rather than letting
git's line merge leave duplicate "from"/"instantiation" keys.
- re3D rPETG @0.8/@1.75 nozzle (2): main renamed these from "re3D Greengate
rPETG @*" and re-vendored GreenGate3D -> re3D (#15169). Git's rename-aware
merge produced a file with two filament_vendor keys; took main's version
wholesale instead. The id is reconciled by the tooling, not by hand.
- re3D rPP (1): kept main's inherits change (fdm_filament_pet -> fdm_filament_pp,
local filament_type override dropped) and its widened compatible_printers.
The flattened type is still PP, so the product triple and id OFfHGM1D are
unchanged.
- re3D Greengate rPETG.json, Afinia {ABS+,ABS,PLA,TPU,Value ABS,Value PLA}.json
(7 modify/delete): accepted main's deletions. The Afinia ids are not orphaned
- the surviving @HS presets resolve the same triple and already carry the
same ids, so nothing is retired.
- .github/workflows/check_profiles.yml: kept both main's new "validate slice"
step and this branch's tree-wide filament-subtype check.
- tests/libslic3r/CMakeLists.txt: kept both test_filament_id_succession.cpp and
main's test_preset_diff.cpp.
Verified
- No conflict markers; all 12795 profile JSONs parse with no duplicate keys.
- All branch artifacts (tooling, snapshot, ledger, doc, tests) intact and
unmodified by the merge.
- The succession-ledger C++ call sites survived main's refactors; audited
Preset.{cpp,hpp}, PresetBundle.cpp, DeviceManager.cpp, PresetComboBoxes.cpp,
CaliHistoryDialog.cpp, MoonrakerPrinterAgent.cpp against base/ours/theirs.
- scripts/tests: 115/116 pass.
Known follow-up: assign_filament_ids.py --check reports 243 errors, all from
filament data main added in the last month (BBL/addnorth, Qidi X5/Plus 5,
Snapmaker U1, re3D). The single failing unit test is the live-tree conformance
test asserting that count is zero. Reconciliation lands separately.
Conflicts were all co-located additions rather than design collisions:
- GCode.cpp: adopt upstream's toolchange(filament_id, nozzle_id) signature and
per-variant set_config_index() while keeping the IMEX bare-T<n> suppression;
rebase the second-layer temperature loop's non-IMEX branch onto upstream's
get_filament_config_index() resolution.
- Preset.cpp / PresetBundle.cpp / PrintConfig.cpp: keep both sides' option-list
and enum-map entries.
- GLCanvas3D.cpp: upstream's printable_heights argument plus the IMEX ghost pass.
- PartPlate.cpp: keep <set> (still used).
- test_gcodewriter.cpp / test_3mf.cpp: keep both sides' test cases.
Resolves two conflicts:
- GLCanvas3D.hpp: keep both the IMEX ghost render declarations and
upstream's _render_wireframe_overlay().
- test_gcodewriter.cpp: both sides appended test cases to the same
region; keep upstream's origin/machine-limit tests alongside the
pressure-advance and temperature scenarios.
- FilamentMapDialog's manual page understands volume types: a mixed
(Hybrid) extruder shows separate Standard / High Flow drop zones
with live sub-nozzle counts, a validation timer with an inline
error + "set nozzle count" suggestion, and composes a per-filament
volume map on OK (persisted to the plate or globally)
- switching an extruder's Flow type rewrites the affected plate map
entries; plate maps stay sized across filament add/delete/count
changes (values keep their filament, no index shift)
- CLI: manual mapping on multi-nozzle printers synthesizes the volume
map from extruder flow types when absent; nozzle-manual mode
requires explicit maps; computed maps land on the plate so exported
projects carry filament_volume_maps
- filament_nozzle_map joins the project options (selection seeding +
filament-count resizing)
- pot entries for the new dialog strings
All 19 reference fixtures byte-identical; slicing an exported Hybrid
project reproduces its g-code byte-for-byte with the volume map
round-tripped through model_settings.config.
- Print::update_filament_maps_to_config takes filament/volume/nozzle
maps, backfills an empty volume map from extruder types, rebuilds
filament_map_2, re-expands the per-filament variant arrays, and
recomputes retract overrides keyed by resolved slots
- grouping writes its result back in every non-sequential mode;
manual multi-nozzle grouping validates the user mapping and raises a
translatable error on deviation; the engine's concrete volume
assignment is deliberately not merged yet (per-filament arrays are
already consumed by filament id, so materializing High Flow now
would change motion before the layer-aware resolvers land)
- Print::apply treats the three map keys as engine outputs in auto
modes (erased from the diff and adopted), compares them against used
filaments in manual mode, and keeps the pre-expansion snapshot in
sync with the late normalization pass so rebuilt headers reflect the
sliced state instead of resurrecting stale values
- volume/nozzle maps and extruder_nozzle_stats join the invalidation
group of filament_map (wipe tower + skirt/brim)
- PresetBundle composes full configs with an optional per-filament
volume map (plate map, else defaults derived from each extruder's
flow type); project config keeps the map sized across filament
count changes
- PartPlate stores per-plate volume/nozzle maps; Plater injects them
at every slice-composition site (incl. g-code reload and wipe-tower
estimation); BackgroundSlicingProcess reads engine results back to
the plate in auto modes
- per-filament map trust guards relaxed to size-match everywhere now
that every producer sizes the map; single-filament explicit flow
assignments are honored
- tests: grouping volume maps stay concrete, merge semantics of
update_used_filament_values, single-filament override honoring
Motion g-code is byte-identical fleet-wide including Hybrid projects
(19-fixture gate + repro determinism double-slice). Header deltas:
the map keys now dump real values, and stale pre-normalization values
(e.g. enable_prime_tower on single-used-filament prints) no longer
leak into the config block.
- get_extruder_nozzle_volume_count derives per-extruder volume-type slot
lists from extruder_nozzle_stats (absent stats = one slot per extruder)
- update_values_to_printer_extruders learns the slot layout: when any
extruder mixes volume types, option arrays keep one slot per
(extruder x volume type), extruder-ascending then volume-ascending;
single-slot resolution takes the filament's volume type on mixed
extruders
- update_values_to_printer_extruders_for_multiple_filaments applies a
per-filament nozzle_volume_type override from filament_volume_map
(when sized to the filament count) and remaps filament_self_index
through the same pipeline as every other filament key
- get_config_index_base + is_auto_filament_map_mode helpers (consumers
land with the per-filament config-index resolvers)
- callers updated: PresetBundle composition paths, PrintApply (counts
hoisted above the extruder_applied guard), Print write-back
- new tests: slot counting, Hybrid slot expansion incl. stride 2,
per-filament override, non-Hybrid degeneracy
Non-Hybrid printers keep their variant layout and values (proven by a
19-fixture byte gate; the only header delta is filament_self_index now
flowing through the same variant pipeline as its sibling filament
keys). Hybrid slices grow the config-block variant arrays to one entry
per sub-nozzle volume type; motion g-code is unchanged until the
g-code writer consumes the new slots.
The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds
every AMS to both extruders through a two-track switch. Port full support
across the device layer, project config, and GUI.
Device / config:
- Model the switch-aware AMS binding (the set of extruders an AMS can feed
and which input track A/B feeds it), switch readiness, the O2L-FTS firmware
module, and the fun2 capability bit for checking a slice against installed
hardware.
- Register has_filament_switcher and enable_filament_dynamic_map as project
config that persists with the project and restores from a saved 3mf, and
force both back to false on every project/printer/CLI load path. Live
device sync is the only thing that sets them true.
GUI:
- Sidebar sync activates the switch from live device state, attributes each
AMS to the extruder its input track feeds, shows a floating status icon
(ready / not-calibrated), and surfaces a one-time tip / not-calibrated
warning.
- Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a
blocking error when a slice needs dynamic nozzle mapping but the switch is
missing or not set up.
- AMS load/unload guards, AMS-view routing glyph + un-calibrated banner +
hidden external-spool road, and mapping-popup external-spool lockout.
- Filament pickers collapse the per-extruder split into a single deduplicated
"AMS filaments" group with a smart-assign toggle when the switch is ready.
- Firmware-upgrade panel lists the O2L-FTS accessory and its version.
- Device-provided filament-change steps (ams.cfs) drive the change-step
display when firmware sends them, including the three switch steps.
- "Load current filament" asks which extruder to feed via a
FeedDirectionDialog when the switch is calibrated.
Inert without the accessory: every path is gated on the switch being
installed (MQTT aux bit 29, default off) or ready, both project flags default
false, and the per-extruder AMS attribution is byte-identical, so AMS state,
the send/load UI, and sliced g-code are unchanged for every printer that does
not report a Filament Track Switch.
