When the spool holder is selected for printing, use the opGcodeFile
command with enableSelfTest instead of colorMatch + multiColorPrint.
This matches the protocol used by CrealityPrint desktop for spool
holder prints.
- Detect spool holder mode: any colorMatch entry with box_id 0
- Spool holder: send opGcodeFile + enableSelfTest (single command)
- CFS: send colorMatch + multiColorPrint (existing behavior)
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Show the spool holder (external filament roll) as a selectable option
in the K2 Plus filament mapping dialog. Previously only CFS slots were
shown because the box state filter excluded the spool holder.
- Only skip inactive CFS boxes (type 0, state != 1); spool holder
(type 1) is always available
- Label spool holder slots as "Ext - {type}" in the dropdown
- Auto-match priority is now:
1. CFS exact (type + color)
2. CFS type-only
3. Ext exact (type + color)
4. Ext type-only
5. Positional default
- When Ext is selected (by user or auto-match), disable other combos
since firmware does not support mixing CFS and spool holder
Signed-off-by: Igor Mammedov <niallain@gmail.com>
When the filament mapping dialog opens, automatically select the best
matching CFS slot for each gcode filament by comparing color and type.
Falls back to positional index if no exact match is found.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Query CFS material slots and show colored dropdowns to map gcode
filaments to physical printer slots. Color mapping is passed through
extended_info as colorMatch entries for the multi-color print protocol.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
---
v4:
- Use gcode tool index (T1A, T1B, ...) as colorMatch id instead of
CFS slot tool_id — firmware expects the gcode filament identifier,
not the destination slot
Add enableSelfTest checkbox to CrealityPrintHostSendDialog that
persists across sessions via AppConfig. The checkbox state is
passed to the upload via extendedInfo().
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Add model_name() to map firmware model codes (F008, F012, F021)
to human-readable names (K2 Plus, K2 Pro, K2). Update the send
dialog init() to detect multi-color support and show a group box
with the printer name.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Add CrealityPrintHostSendDialog scaffolding: an empty dialog class
that inherits from PrintHostSendDialog, and Plater wiring to use
it when the host type is CrealityPrint.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
For supported models, start_print() sends colorMatch (filament-to-slot
mapping) followed by multiColorPrint (with optional calibration via
enableSelfTest) instead of the legacy opGcodeFile command. The dialog
passes color mapping and calibration settings through extended_info.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
---
v4:
- Skip "path" form field in multipart upload for multi-color printers
(extra field breaks K2 Plus firmware parser)
- Use fire-and-forget ws.write() for colorMatch and multiColorPrint
instead of ws_send_and_read() (printer sends response asynchronously)
Add query_boxes_info() to discover loaded materials in the CFS
(Creality Filament System) via websocket. Returns the boxsInfo
JSON with slot details (type, color, vendor, temperature range).
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Add a reusable websocket helper that sends a JSON command and loops
reads until finding a response containing the expected key. This
handles the printer's unsolicited status messages that arrive on
connect before the actual response. Returns empty string on timeout
instead of throwing.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Consolidate websocket connection setup into a reusable helper.
Migrate from tcp::socket to beast::tcp_stream for timeout support.
Set SO_RCVTIMEO read timeout (3s) and connect timeout (5s).
Refactor query_boxes_info() and start_print() to use ws_connect().
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Parse the model field from the /info JSON response to enable
model-specific features. Add supports_multi_color_print() which
returns true for K2-platform printers (K2 Plus, K2 Pro, K2).
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Change start_print() from void to bool with a wxString& msg
out-parameter, matching the error handling pattern used by Duet,
MKS, ESP3D and Flashforge. On failure, the error message is now
reported to the user via error_fn instead of being silently
swallowed. Use BOOST_LOG_TRIVIAL for logging instead of std::cerr.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Move duplicate get_host_from_url() implementations from ElegooLink and
OctoPrint into Http as a static method using the curl_url API. This
eliminates code duplication and provides a single reliable URL host
extraction utility for all print host implementations.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
get_host_from_url() returns host:port which may cause
boost::asio::ip::make_address() to fail when a port is present,
bypassing the direct IP upload path and falling through to DNS
resolution via upload_inner_with_host(). Use get_host_from_url_no_port()
to extract just the host.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
* K2 Plus: add print area bounding box for adaptive bed mesh
The K2 firmware reads MINX/MINY/MAXX/MAXY gcode comments to
determine the adaptive bed mesh area. Without these, it falls
back to full bed mesh even when calibration is enabled.
K2 Pro also reads these comments (its profiles already had them).
Signed-off-by: Igor Mammedov <niallain@gmail.com>
* K2: add print area bounding box for adaptive bed mesh
Same change as K2 Plus — prepend MINX/MINY/MAXX/MAXY gcode comments
so firmware can determine the adaptive bed mesh area.
K2 Pro already had these.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
* Creality: bump profile version to 02.03.02.72
Signed-off-by: Igor Mammedov <niallain@gmail.com>
---------
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Igor Mammedov