# Description
Filament changes on the Prusa CORE One MMU3, MK4 MMU3 and CORE One INDX
now use the settings PrusaSlicer 3.0 ships for them. On the MMU3
printers these are Prusa's per-material ramming, load and unload speeds,
cooling moves and stamping. On the INDX they are Prusa's multi-tool
ramming and 10 mm³ minimal purge, plus a filament start G-code that
restores pressure advance after the purge station disables it and then
sends `M573 R`, as PrusaSlicer does.
This supersedes #16008. Thanks to @nuclearmistake for that work, which
identified what these printers need for reliable filament changes. This
PR reaches the same goal with the existing `include` mechanism rather
than new printer-level overrides. The values live in shared templates in
the Prusa bundle (PLA and PETG families with High Flow ramming variants,
and one for the INDX), and the filament presets include them, so each
material keeps its own values as in PrusaSlicer. For the MK4 MMU3, ten
small presets inherit the MK4 filament tunes and include the templates;
they cover the materials PrusaSlicer offers with the MMU3 and replace
the library generics as that printer's defaults. The CORE One MMU3 0.6
nozzle now uses the 0.6 Generic PLA and Prusament rPLA profiles, as in
PrusaSlicer. Unlike #16008, filaments from Orca's shared library keep
Orca's defaults on these printers.
No engine change, and printers without an MMU3 or INDX are unaffected.
MK4 MMU3 users also get the MK4's material tuning, such as temperatures
and cooling, from the new presets.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
# Description
This PR follows up on #16019 with fixes and workflow improvements to the
Design tab. Sketching now waits for you to pick a plane, the reference
planes stay out of the way until they are needed, and the camera follows
the mouse controls set in Preferences, as suggested by @Felix14-v2 in
https://github.com/OrcaSlicer/OrcaSlicer/pull/16019#issuecomment-5932747510.
It also fixes rendering, camera and Move bugs, which are listed below.
https://github.com/user-attachments/assets/6aac0a03-8405-403a-93b2-1fbf95da9fe7
**Improvements:**
- Pan and orbit follow Preferences > Control while sketching too. A
right-drag no longer ends the polyline chain or drops the point already
placed, and in the Touchpad camera style Alt+move and Shift+move orbit
and pan while a draw tool is selected.
- The XY, XZ and YZ planes are separate labelled squares around the
origin, in their axis colours, with dash-dot axes. They no longer cross
through the bed as one grey smear. Hovering over a plane greys it out,
and selecting one makes it solid.
- The reference planes stay hidden until a sketch needs them. A new
Origin row in the Feature tree keeps them on screen, and Ctrl+Shift+O
toggles it.
- A sketch opens only once its plane is chosen. If a flat face or a
reference plane is already picked, the sketch opens on it at once.
Otherwise the planes appear, and the next plane or face you click opens
the sketch. Esc or Cancel leaves without one.
- The Bed checkbox is now a row under Origin, and its state is
remembered across sessions. Both rows sit above the feature list as
fixed view switches.
- Zoom to selection is available on Feature tree and Bodies rows and in
the right-click menu.
- A Sketch button replaces the FEATURES label, the import icons now have
an arrow, and the document icons are sized consistently.
**Fixes:**
- Feature previews no longer z-fight with the bodies. The Hole preview
now hides the bodies and shows only the result, as Fillet/Chamfer and
Draft already do.
- Body edge lines stay in sync with the bodies after undo, hide and
delete.
- The bed, grid and reference planes stay aligned on every plate, not
only the first.
- The Fit camera button frames the selection and sketches, or everything
on show, instead of always framing the whole bed.
- Grabbing a move arrow no longer makes the body jump on the first drag.
- Move no longer gets stuck after Esc or a click off the gizmo. Esc and
Cancel put the body back, and undo waits until the Move is confirmed or
cancelled.
- The camera stays still when the first body appears.
- The view buttons no longer cover the status line at display scales
above 100%.
- The import buttons no longer stay highlighted after a click.
- The Bodies right-click menu no longer closes at once on Linux.
# Screenshots/Recordings/Graphs
- **Z fighting issue**
Before fix:
https://github.com/user-attachments/assets/0da30897-8d81-494a-a206-9b4dfd8fa9c0
After fix:
https://github.com/user-attachments/assets/04ccad39-dbbc-4bcf-8d5c-3ba4894cb755
- **Sketch plane rendering**
Before:
<img width="374" alt="{CCFCEB16-20FA-4202-A5F8-5F2219E44C0B}"
src="https://github.com/user-attachments/assets/2dfd19b2-9991-45c7-91e3-e139d111229c"
/>
After:
<img width="1706" height="1258" alt="image"
src="https://github.com/user-attachments/assets/3ec89038-4614-4c04-9f20-37bfc50ee5ef"
/>
- **Wrong body frame lines**
Before:
https://github.com/user-attachments/assets/81ccae26-2a9d-4ecb-9928-678dbe9fb94c
After
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
* fix: crash in LAN mode when the printer type is not known yet
InputIpAddressDialog::set_machine_obj() built the help image name from
the printer config with no fallback. If the printer type is empty or
unknown, for example before the first push_all arrives on a flaky LAN
link, the lookup returns "" and create_scaled_bitmap("_en") throws.
The dialog is opened by the "LAN Connection Failed" handlers in
MediaPlayCtrl and MediaFilePanel, where nothing catches the exception,
so the app crashes.
Use input_access_code_x1 when there is no image, and the _cn image for
zh_CN, the same as ConnectPrinterDialog::init_bitmap().
Ported from Bambu Studio 52ca2ec5d1.
* fix: return an empty bitmap for an empty icon name
create_scaled_bitmap() threw when a caller passed an empty name. That
happens when a printer config lookup has no entry, for example in
AMSSetting::update_ams_img() for a printer type with no AMS image.
Log an error and return wxNullBitmap instead.
Ported from Bambu Studio 52ca2ec5d1.
They now sit above the features' framed list as fixed view switches:
a click no longer selects them, they stay put while the features scroll,
their eyes line up with the features' eyes, and their labels dim when
hidden. Ctrl+Shift+O toggles the Origin from the keyboard, as
Ctrl+Shift+B does the Bed. The test script's position for the first
feature row is calculated, not measured, and needs re-measuring on the
test setup.
The bed's show/hide state is now remembered across sessions like the Origin
row's, shown by default. The GUI ladder's ribbon x-coordinates are shifted by
the removed checkbox's derived width and still need re-measuring on the rig.
Sketch on a picked flat face or reference plane opens the sketch on it at once. With nothing
picked it no longer enters sketch mode: the reference planes and axes come up, and the plane or
flat face clicked next opens the sketch and puts them away. Esc or Cancel leaves without one.
A picked plane is used up by the sketch on it and dropped by Esc or a click on nothing, the plane
prompt is no longer replaced by a stale tool hint, and clicking the face a sketch was just
cancelled on picks that face again rather than the whole body.
* perf: write post-processed G-code without a per-line copy
* perf: size the post-process line map from the first pass
* test: line ends of the exported G-code
* test: include the headers the line-ends test and gcode() helper use
Ramming, load/unload, cooling-move and stamping values follow the
PrusaSlicer 3.0 presets, which retune several of them relative to
2.9.6. The CORE One MMU3 0.6 nozzle now uses the 0.6 Generic PLA and
Prusament rPLA profiles, as in PrusaSlicer.
* Use a System clang-tidy When Available and Make --fix Converge in One Pass
scripts/run_clang_tidy.sh only looked at CLANG_TIDY and the venv it creates,
so a clang-tidy already on the system was never used. It is now the first
choice: the pinned version outright, another version after a prompt that
says results may differ slightly from CI, which -y and an existing pinned
venv skip.
Two problems in clang_tidy_diff.py made --fix need several runs and still
leave the plain check failing:
- A deleted #include orphans uses on unchanged lines. The plain check runs
such a file whole and reports them, but --fix kept the line filter to the
changed lines, so they were never fixed. Fix mode now runs the file whole
first and then fixes exactly the changed lines plus the lines that run
found wanting, so unrelated lines are still never rewritten.
- clang-tidy exits non-zero for the findings it just fixed, so every fixed
file was reported as failed and the user ran --fix again to see what was
left. A file --fix changed is now checked again and the fixed files are
listed separately from what --fix could not add.
CI runs the script without --fix and is unchanged.
* Keep the a/ b/ Diff Prefixes Whatever the User's Git Config Says
parse_diff recognises a changed file by its +++ b/ header. With
diff.noprefix or diff.mnemonicPrefix set, git prints +++ src/x.cpp or
+++ w/src/x.cpp instead, every file was dropped, and the local check
reported no changed C++ lines. The diff is now asked for the a/ and b/
prefixes outright, which overrides both settings.
* Warn When No Remote Points at OrcaSlicer/OrcaSlicer
Without one, run_clang_tidy.sh compares against origin/main. When origin
is a fork whose main already holds the commits, the check finds nothing
and says so, without hinting at why. The script now names the base it
fell back to and how to point it at the upstream repository.
Esc and Cancel now put the body back, and Confirm keeps the new position. A click off the
gizmo only moves the camera and no longer leaves the Move card and its buttons dead. Starting
another edit or a rebuild keeps the position, and undo is refused until the Move is confirmed
or cancelled.
The XY, XZ and YZ planes no longer cross through the bed. Each is a small square in its axis
colour, set off from the axes into the corner that faces the default front view, with its name
written in the plane. Dash-dot axes run between the squares and replace the bed's axis triad
while they show. Hovering a plane greys it and selecting one makes it solid, and picking a
solid face now clears a previously picked plane.
Grabbing an arrow anywhere along its length snapped the body's centre to that point as soon
as the mouse moved. The body now moves by how far the cursor travels from where the arrow
was grabbed, including when it is grabbed while looking straight down the axis.
The XY/XZ/YZ planes are cut along each other and drawn back to front, with
lines along every crossing, and their fills are strong enough for the order
to show. Before, they blended into one grey smear and were too pale to work with.
In the Design tab the button always swung the camera to the plate view and framed the whole
bed, whatever was selected: the tab's picks and sketches are neither the canvas's selection
nor its volumes. It now frames the selected faces, body, edges, vertex, sketch region or
sketch entities, and with nothing selected everything on show — the visible bodies, the
feature preview and the sketches — keeping the current view direction. An empty tab still
frames the bed as before.
The line started at a fixed inset scaled like the ImGui style, while the navigator and the
round canvas buttons scale with the monitor's DPI on Windows, so at 150% the buttons covered
its first words. It now starts past the edge the canvas reports for that corner.
run_clang_tidy.ps1 had not been run on Windows before.
- Run native commands through Invoke-Quiet. Under
$ErrorActionPreference = "Stop", Windows PowerShell made CMake's
first stderr line fatal, so configure always failed.
- Pass the --line-filter name with native separators. clang-tidy
matches it against the end of the file's native path, so on Windows
every misc-include-cleaner finding was dropped.
- Decode subprocess output as UTF-8 and let stdout replace characters
it cannot encode. A changed line with text such as 打印 crashed the
script under cp1252.
- Check VCToolsInstallDir and WindowsSdkDir in VsDevCmd's output
before applying it, so a failure names the command to run and leaves
the calling shell untouched.
- Log the git_commit_hash_header build, use -LiteralPath for logs, and
hide VsDevCmd's stderr as build_win.bat does.
On every platform, git quotes non-ASCII paths and appends a tab to a
+++ header whose path contains a space, and parse_diff dropped both.
changed_files and the workflow's changed-files step now pass
core.quotePath=false, and parse_diff strips the tab.
* plates-toolbar-scrollbar-size
* update
* filament grouping dialog
* mixed filament list
* Update StepMeshDialog.cpp
* moves plot scrollbar
* fix position of popups
* printer agent combo box width
* match multiline text control background
* add dots to configure button
* also correct label color for multiline input
* side tools connecting text color
* recenter dialog text color
* preferences experimental features
* upgrade panel hyperlink color + right margin
* fix position of + sign on printer selector
* speed control popup
* bbl fan control window
* AMS materials setting
* monitor > ams section
* match background color of multiline text editor on project page
* Fix SwitchButton colors
* bbl camera popup
* BBL > Send print dialog
* Revert "BBL > Send print dialog"
This reverts commit 128e145897.
* Revert "bbl fan control window"
This reverts commit 4a0db62790.
* Revert "bbl camera popup"
This reverts commit e2301e3237.
* Revert "monitor > ams section"
This reverts commit 66e6894eb1.
* Revert "fix position of + sign on printer selector"
This reverts commit 1523ba24c0.
* Revert "upgrade panel hyperlink color + right margin"
This reverts commit 541f2514c5.
* Revert "side tools connecting text color"
This reverts commit a9ab074247.
* Revert "recenter dialog text color"
This reverts commit f4670d32b2.
* Revert "AMS materials setting"
This reverts commit b12827f9b5.
* Revert "Fix SwitchButton colors"
This reverts commit 2d4f1d1fe9.
* match object list background color
* match compare dialog wxDataViewCtrl background color
* fix centering of iconized buttons on linux
* fix compare dialog background color not applied on linux
* edit gcode dialog components background color
* Update Plater.cpp
* fix dev button font size
* Fix scaling issue on SwitchButton while using 150%
* transfer or discard changes dialog wiki label
* "Transfer or Discard changes" / "Unsaved Changes" dialog header color
* object table colors & header spacing
* progress dialog
* fix progressbar look on linux
* fix build
* fix build
* fix centering of iconized icon again
* fix header background color
* revert bbl fan control
* add includes
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Panning or orbiting with a right-drag no longer ends the polyline chain or drops
the point already placed. Only a right-click that doesn't move does. In the
Touchpad camera style, Alt+move and Shift+move now orbit and pan even while a
draw tool is armed.
SoftFever