Fix crash in PA calibration pattern generation
Reset current extruder ID and clear pointers in set_extruders to prevent dangling pointers when extruders are recreated. Also fixed undefined behavior by checking if the vector is empty before taking max_element.
Co-authored-by: SoftFever <softfeverever@gmail.com>
## Summary
- Change default bed temperature type from "By First filament" to "By Highest Temp"
- Move `bed_temperature_formula` option from develop mode to advanced mode for better accessibility
- Relocate UI control from "Basic Information - Advanced" to "Multimaterial Setup" section where it's more relevant for multi-filament printing
Using the highest temperature of all printed filaments is generally safer for bed adhesion than using the first filament's temperature, especially in multi-material prints where different filaments may require different bed temperatures.
<img width="390" height="239" alt="Screenshot 2026-02-26 at 18 44 56" src="https://github.com/user-attachments/assets/0fe9f8c7-062a-4a7a-8ab3-c52df7e74b26" />
# Description
This PR enhances the GCodeProcessor's time estimation by incorporating Junction Deviation (JD) into the jerk calculations, providing more accurate print time predictions for firmwares that use JD (like modern Marlin).
Key Changes:
- Added JD support to time estimation
- Reads machine_max_junction_deviation (machine limits) and default_junction_deviation (print profile)
- When JD is enabled (>0), replaces traditional X/Y jerk values with JD-based calculation:
$Jerk = \sqrt{2.5\cdot JD \cdot acceleration }$
- Falls back to traditional jerk when JD is not used
# Test:
JD:0.0256mm Accel.: 1000 mm/s²
<img width="2560" height="1392" alt="image" src="https://github.com/user-attachments/assets/f0e95294-bfca-400e-bffc-8d615d051b70" />
Jerk: 8mm/s (equivalent)
<img width="2560" height="1392" alt="image" src="https://github.com/user-attachments/assets/8508727e-70f6-49ed-ac19-002db73e957b" />
JD:0.0128mm (4mm/s jerk)
<img width="2560" height="1392" alt="image" src="https://github.com/user-attachments/assets/91b04d3b-1b9e-48f4-b4b4-5addda2eff57" />
Added checks in ByLayer print sequence to handle ordering for Intra-layer ordering option. Prevents new ordering setup when "As object list" is enabled.
* Fix float number not working properly for option min/max (#11211)
* ConfigOptionDef: min/max values type are changed from INT to FLOAT.
(cherry picked from commit f277bc80c22e0c9a067481a4301922e2c96aed47)
* Fix infinite loop and crash when `fuzzy_skin_point_distance` = 0 (SoftFever/OrcaSlicer#11069)
* Fix Linux build issue
* Fix float comparison due to precision loss
* Fix: Range check added for coInt options; Ranges and defaults added in tooltips
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
print_machine_envelope() used get_extruder_id(extruder_id)*2 to index
machine limit arrays that only hold [Normal, Stealth] (2 entries).
For multi-extruder setups this went out-of-bounds, causing wrong M201/M203
values in the G-code which then override the estimator's correct limits.
Same class of bug as c6d1c11ebb but on the G-code writer side.
Changes:
- Remove unused extruder_id param from print_machine_envelope()
- Use .values.front() for M201/M203, matching M204/M205 in same function
- Change get_option_value() fallback from .back() to .front() so any
future out-of-bounds index returns Normal mode instead of Stealth
The extruder_id*2 offset in get_axis_max_feedrate/get_axis_max_acceleration
was cherry-picked from BambuStudio's per-nozzle limit system, which OrcaSlicer
never ported. Without that system the limit arrays only have 2 values
([0]=Normal, [1]=Stealth), so any extruder_id > 0 or the uninitialized
value (255) would overshoot the array and fall back to values.back(),
always returning stealth-mode limits and producing incorrect time estimates.
Revert to indexing by time mode only (matching v2.3.1 behavior) and simplify
the M201/M203 handlers to write only the two mode slots they actually use.
* Add Pressure Advance visualization support
Signed-off-by: minicx <minicx@disroot.org>
* Port Pressure Advance visualization to libvgcode architecture
Adapt PA visualization (originally in commit e3a77259) to work with
the new libvgcode library introduced by upstream PR #10735.
Changes across the libvgcode stack:
- PathVertex: add pressure_advance field
- Types.hpp: add PressureAdvance to EViewType enum
- ViewerImpl: add ColorRange, color mapping, range updates for PA
- LibVGCodeWrapper: pass pressure_advance from MoveVertex to PathVertex
GCodeViewer UI integration:
- Add "Pressure Advance" to view type dropdown
- Add PA color range in legend (3 decimal places)
- Add PA value display in sequential view marker tooltip
- Add PA row in position properties table
The GCodeProcessor PA parsing (M900, M572, SET_PRESSURE_ADVANCE)
is preserved from the original implementation.
* Tag Pressure Advance visualization changes with ORCA comments
Signed-off-by: minicx <minicx@disroot.org>
---------
Signed-off-by: minicx <minicx@disroot.org>
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Co-authored-by: Claude <noreply@anthropic.com>
Wipe tower interface features and preheat fixes
Fresh PR branch rebuilt on upstream/main (squash of origin/BBL-studio-wipe-tower-merge) to avoid merge-history issues.
* Add Rectilinear Support for Normal support type. Fix issue #9508.
* Remove duplicate the rotation logic, use raft_interface_angle function.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* fixes: keys_map is initialized with itself [-Winit-self]
* fixes: operation on repeats may be undefined [-Wsequence-point]
* fixes: warning: suggest parentheses around && within || [-Wparentheses]
* fixes: moving brim_points to itself [-Wself-move]
* fixes: operation on unprintability may be undefined [-Wsequence-point]
* fixes: extra tokens at end of #endif directive [-Wendif-labels]
* fixes: converting to non-pointer type int from NULL [-Wconversion-null]
* review result: simplifies fix 'operation on repeats may be undefined'
Sorry had to re-create the PR as I did some chaos in my repo with CLI. xD
Fixes issue https://github.com/OrcaSlicer/OrcaSlicer/issues/10971
Description:
Fix wipe tower filament selection and clean up tool ordering. Added wipe_tower_filament handling to WipeTower2 (store config, mark non-selected tools as “soluble,” and use it in toolchange selection) and ensured the configured wipe‑tower extruder is included in the extruder list for ordering. Removed duplicated/merged tool‑ordering code (extra insert_wipe_tower_extruder definition, duplicate declaration, and redundant reorder block) so the tool order logic runs only once.
<img width="1819" height="799" alt="image" src="https://github.com/user-attachments/assets/cef39026-cf6a-46da-a87a-ef895774699f" />
This PR adds a new filament sync mode setting for device-based filament synchronization.
Users can now choose between syncing both filament preset + color (current behavior) or syncing color only, so calibrated local filament profiles are preserved while still updating slot colors from the printer.
It also includes small UI improvements for the new preference entry and sync status messaging.
<img width="665" height="671" alt="image" src="https://github.com/user-attachments/assets/23980846-0113-48ab-84aa-adf5cdab8ab6" />
## Problem
Some Creality printers (e.g. Ender-3 V3 SE) rely on metadata comments in the first lines of G-code files to display print info on the screen (estimated time, filament usage, layer height). This follows a format originally used by Cura/Creality Print:
```
;FLAVOR:Marlin
;TIME:3708.97
;Filament used:6.21m
;Layer height:0.2
```
OrcaSlicer currently has no way to write content before the `HEADER_BLOCK` in the G-code output, and does not expose `print_time_sec` or `filament_length_m` as usable placeholders. As a result, these printers show zeroed-out print info on screen.
## Changes
### 1. New placeholders (post-processing)
Added two new G-code placeholders resolved during post-processing:
- `{print_time_sec}` — total estimated print time in seconds (double)
- `{filament_length_m}` — total filament length in meters (double)
These values are only available after G-code generation, so they use inline marker replacement (`@PRINT_TIME_SEC@`, `@FILAMENT_LENGTH_M@`) that `GCodeProcessor::run_post_process()` substitutes with actual computed values — the same pattern used by existing M73 and layer count placeholders.
### 2. New "File header G-code" option (`machine_top_gcode`)
Added a new G-code field in **Printer Settings > Machine G-code** that writes content at the very top of the output file, before `HEADER_BLOCK_START`. This allows users to add firmware-specific metadata that must appear in the first lines.
### 3. Creality Ender-3 V3 SE profile update
Pre-configured the Ender-3 V3 SE profiles (all 4 nozzle variants) with a default `machine_top_gcode` value matching the Cura-compatible header format, so print info displays correctly out of the box.
# Screenshots
| Before (current OrcaSlicer) | After (this PR) |
|---|---|
|  |  |
## Tests
- Sliced test model with Ender-3 V3 SE profile
- Verified G-code output contains correct values in first lines:
- `;TIME:` with actual print time in seconds
- `;Filament used:` with filament length in meters
- `;Layer height:` with correct layer height
- Verified `{print_time_sec}` and `{filament_length_m}` work in both Machine Start G-code and File header G-code fields
- Verified empty `machine_top_gcode` produces no extra output
- Built and tested on macOS (arm64)
* Add read support for Google's Draco (.drc) format.
* Fix build on Linux
* Use boost instead of fstat.
* Switch to boost memory-mapped file to save RAM and potentially improve performance.
* Trim trailing whitespace.
* Initial Draco write support.
Currently always exports with 16-bit precision and speed 0 (best compression).
The back-end function does have arguments to specify them, it's just not hooked into the GUI.
* Add Draco to the About dialogue.
* Fix Linux compile (hopefully)
* Add an option to associate DRC files on Windows.
* Implement a Preferences option to set Draco position quantization bits
* Update src/slic3r/GUI/Preferences.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Some slight changes to ianalexis's suggestion.
* Implement a create_item_spinctrl() function for numeric inputs, and use that instead of create_item_input().
* Move "bits" to inside the spinctrl box.
* Refactor following yw4z's feedback
* Update src/slic3r/GUI/Preferences.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Change to 0 bits as the default setting for Draco export precision.
* Change to a lossy checkbox and a bits field with a range of 8-30.
* Proper SpinInput code from yw4z
* Revert "Proper SpinInput code from yw4z"
This reverts commit 7e9c85f31a.
* Revert "Change to a lossy checkbox and a bits field with a range of 8-30."
This reverts commit d642c9bcc0.
* Redo preferences based on SoftFever's feedback
* Refactor to minimize code duplication
* Fix padding
* Improve Draco export quality level tooltip clarity
Clarify that 0 means lossless compression (not uncompressed),
document the valid lossy range (8-30), and better explain the
tradeoff between file size and geometric detail.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Closes#11726
# Description
Removed hardcoded 0.2mm layer height.
Now it will stay in with the user process.
Also corrected several config assignments to use print_config instead of obj->config for consistency.
## Note
Didn't change PA PATTERN because i don't know if it may impact the calibration results for this specific test.
* Fix active filament preset not matching wizard selection on first run
After completing the setup wizard with only a non-PLA filament selected
(e.g. Generic ABS), the active filament preset defaulted to Generic PLA
instead of the user's selection. This happened because load_presets()
falls back to Generic PLA when the initial printer differs from the
preferred printer, and the first_added_filament override was disabled.
Add post-load correction in apply_config() that switches the active
filament to the first compatible wizard-selected filament when the
current active filament is not in the wizard selection. Also fix the
guide JS (22.js, 23.js) to use the filalist attribute for building
the filament array, and add platform-specific build test commands to
CLAUDE.md.
* Replace @System filaments with vendor-specific overrides in wizard
When the wizard selects a generic filament like "Generic ABS @System",
check if a vendor-specific override exists (e.g. BBL "Generic ABS")
and use that instead. This ensures printer-tuned profiles are preferred,
preventing load_installed_filaments from adding unwanted BBL defaults.
When printers from the default bundle are also selected, both variants
are kept since those printers need the @System version.
Also adds diagnostic logging for filament loading in LoadProfileFamily.
* Guard against persisting presets for Default Printer and fix filament override logic
Prevent export_selections from saving stale preset settings for the
built-in "Default Printer" placeholder, which is only the initial state
before a real printer is loaded. Also require a non-default vendor printer
to be selected before replacing @System filaments with vendor-specific
overrides in the wizard, avoiding incorrect filament substitution when
only the default bundle is present.
