fix(printconfig): register enable_filament_dynamic_map and has_filament_switcher options
PR #13388 (X2D Support) added import/export for these options in
bbs_3mf.cpp but never registered them in PrintConfig.cpp. Loading any
.3mf containing these keys throws UnknownOptionException at
PartPlate.cpp:6153 when config->apply() looks up the missing definition.
Hide tree support parameters not in use
- hide independent support layer height for organic tree support
- hide threshold overlap for tree supports
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Base IS Machine
* Toggle line
* Rebase
* Intento 1
* Wiki IS
* Flavorized
* Tooltips
* Calibration using the same list
* max
* Reorder JD validation
* Refactor set input shaping
* Calibrations IS
* Default values
* Axis
* Orca comments
* Rename input_shaping_enable to input_shaping_emit
Refactor all references of the input shaping configuration option from 'input_shaping_enable' to 'input_shaping_emit' across the codebase. This improves clarity by better reflecting the option's purpose of controlling whether input shaping commands are emitted in the generated G-code.
Restore DONT EMIT FOR KLIPPER
* Refactor input shaping option toggling logic
Simplifies and consolidates the logic for toggling input shaping related options in TabPrinter::toggle_options(). Uses a loop to handle enabling/disabling lines based on GCode flavor compatibility, and refines the conditions for toggling individual options.
* Improve input shaping option toggling logic in TabPrinter
* GrayOut Emit to gcode limits for klipper
* Typo
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Typo
* Skip Y input-shaper when type is Disable
If marlin2 and disabled it will be already disabled at X.
* IS expert
Co-Authored-By: SoftFever <softfeverever@gmail.com>
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Fixed PrintConfig.hpp order so Repetier outputs, updated ConfigWizard to use gcode_flavor value rather than static
Add Repetier to enum values and labels
Update to add Repetier base profile to the setup wizard
Re-order gcode_flavors in PrintConfig.hpp and PrintConfig.cpp to match
Revise ConfigWizard.cpp to use gcode_flavor rather than list order
Add Repetier profiles and include in custom.json (profile disables m73 and stop emit machine limits which Repetier doesn't use)
* Fix JSON formatting in Custom.json
* Add support for pressure advance in Repetier flavor
* Add Repetier flavor show motion ability tab is visible
* Refactor jerk handling for Repetier flavor
* Update resources/profiles/Custom/machine/MyRepetier 0.4 nozzle.json
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update resources/profiles/Custom/machine/fdm_repetier_common.json
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* add back localisation flag for Klipper
* tidy up indentation and braces
* Space indentation for Repetier profiles changed to tab
* Fix space indentation in Custom.json file for Repetier profiles
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Fix support interface semantics and gap handling
Fix zero-gap interface detection and gap initialization for supports and raft.
Ensures correct top/bottom contact semantics and avoids relying on default zero gaps.
* Additional fixes and robustness improvements
Fix incorrect coupling between top and bottom support interface spacing and density, ensuring bottom interfaces use their own parameters for smoothing and toolpath generation.
Restore correct bottom interface generation for organic (tree) supports when a non-zero bottom Z gap is used, and preserve contacts even when base polygons are empty.
Improve robustness of organic support slicing by fixing layer index drift and guarding against degenerate polygon boolean operations.
* Typo and semantics fix
differnt_support_interface_filament -> different_support_interface_filament
soluble -> zero_top_z_gap
* Fix non organic tree bottom support interface generation
Slim tree bottom interface layer numbers were capped by the object's layer number beneath it.
Fixed by refactoring the generation algorithm.
* Fix non organic tree interlaced support generation
Deterministic local interlaced support layers generation for non-organic tree support
* Enable support interface multimaterial for non organic tree
Enables mixed-material support interface behavior for non organic tree support type.
* Fix tree support interface layer counts and contact handling
- Correct non‑organic tree top interface layer budgeting so gaps don’t consume a layer (N stays N).
- Remove the extra roof interface pass that was duplicating the 2nd layer.
- Organic tree: use only the lowest contact footprint and avoid extra bottom‑contact extrusion so interface count matches the user setting.
* Bugfixes (a lot)
Many, many bugs fixed, majority edge-case but still not playing by the rule.
Some of them:
- on multilevel base, on very small level variations the support was capped to the topmost level height
- non-organic tree had gaps for supports in a multilevel base situiation
- independent support layer height had issues with support interfaces (base support beneath bottom interface, top contact layer sometimes missing)
- organic tree had issues with small variation multi-level base
- organic tree support with zero top Z distance could overlap support-material and interface-material paths when separate materials were used
- many, many others (I lost track of them)
This PR supersedes #12225, which originally proposed this feature but
appears inactive.
The feature originated from work I developed earlier in
[BambuStudio-ZAA](https://github.com/adob/BambuStudio-ZAA), a private
fork of Bambu Studio
Compared to #12225, I updated the implementation for current upstream
and fixed the following issues:
- fixed broken tests
- removed references to nonplanar directory
Reviewers may want to compare against #12225 for earlier
discussion/context.
## Summary
Port of **Z Anti-Aliasing (ZAA)** from
[BambuStudio-ZAA](https://github.com/adob/BambuStudio-ZAA) to
OrcaSlicer.
ZAA eliminates visible stair-stepping on curved and sloped top surfaces
by raycasting each extrusion point against the original 3D mesh and
micro-adjusting its Z height to follow the actual surface geometry. The
result is visibly smoother domes, chamfers, and shallow slopes — without
post-processing.
## How It Works
1. The slicer runs normally, then a **posContouring** step processes
each layer
2. `ContourZ.cpp` raycasts every extrusion point vertically against the
source mesh
3. Each point's Z is adjusted to the mesh intersection, converting flat
`Polyline` paths into `Polyline3` paths with per-point Z coordinates
4. The G-code writer emits the adjusted Z values, so the printer follows
the true surface
## Configuration
Five new settings under **Print Settings > Quality**:
| Setting | Type | Default | Description |
|---------|------|---------|-------------|
| `zaa_enabled` | bool | off | Master enable/disable switch |
| `zaa_min_z` | float | 0.06 mm | Minimum Z layer height; controls
slicing plane offset |
| `zaa_minimize_perimeter_height` | float | 35° | Reduce perimeter
heights on slopes below this angle (0 = disabled) |
| `zaa_dont_alternate_fill_direction` | bool | off | Keep fill direction
consistent instead of alternating |
| `zaa_region_disable` | bool | off | Disable ZAA for a specific print
region/material |
## Key Changes
- **Core algorithm**: New `src/libslic3r/ContourZ.cpp` (~330 lines) —
raycasting engine
- **3D geometry**: `Point3`, `Line3`, `Polyline3`, `MultiPoint3` extend
existing 2D types
- **Arc fitting**: Templated to work with both 2D and 3D geometry
- **Pipeline**: `ExtrusionPath::polyline` changed from `Polyline` to
`Polyline3`; new `posContouring` step in `PrintObject.cpp`
- **G-code**: `GCode.cpp` writes per-point Z when `path.z_contoured` is
set
- **UI**: ZAA settings exposed in Print Settings > Quality panel
- **Documentation**: `docs/ZAA.md` with usage and implementation details
57 files changed, ~1800 insertions, ~200 deletions.
## Test Plan
- [ ] Load a model with curved top surfaces (sphere, dome, chamfered
box)
- [ ] Enable **Z contouring** in Print Settings > Quality
- [ ] Slice and verify G-code has varying Z values within contoured
layers
- [ ] Build on macOS (verified), test on Linux and Windows
* Elefant foot compensation for solid layers
Elefant foot compensation for solid layers above bottommost by infill density manipulation.
* Update Fill.cpp
* change the option to expert cat
* use is_approx for float
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add extrusion role change G-code options
Introduces new G-code options for handling extrusion role changes at the process and filament levels. Updates configuration, GUI, and GCode logic to support 'process_change_extrusion_role_gcode' and 'filament_change_extrusion_role_gcode', allowing custom G-code insertion when the extrusion role changes.
Co-Authored-By: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* Optimize extrusion role-change gcode handling
Cache gcode template strings and current filament id, and guard creation of DynamicConfig/placeholder processing behind a check that at least one role-change gcode is non-empty. This avoids redundant config lookups and DynamicConfig/placeholder parsing when no custom role-change gcode is defined, improving clarity and performance without changing behavior.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
# Description
This commit adds the enhancement of https://github.com/OrcaSlicer/OrcaSlicer/issues/13116
- Adds checkboxes to enable or disable the fan speed override during print or after printing is completed. This allows users to, for example, only override the fan speed during printing whilst leaving the fan speed as is set in the machine gcode at the end.
- Two new flags are added for this: `activate_air_filtration_during_print[extruder]` and `activate_air_filtration_on_completion[extruder]`. These can be used to more finely control machine gcode
- Current filament settings remain as they are: `activate_air_filtration[extruder]` settings are unaffected and by default both new flags are set to true, ensuring the same set behavior as before.
# Screenshots/Recordings/Graphs
<img width="856" height="208" alt="Screenshot From 2026-04-09 18-57-14" src="https://github.com/user-attachments/assets/e71e7de3-2def-4046-b5dc-55bf3b516ce5" />
As you can see there are now checkboxes left of the fan speeds. They have their own tooltip too, which also helps identify the correct flags for users who want to adjust their machine gcode.
## Tests
I have thoroughly tested this on my own computer (CachyOS) and on my printer. I have also carefully checked the gcode in every possible state this is in and ensured that the unsaved changes dialog properly displays the labels for these settings. Flags are set properly, sliced files properly use the flags if you check for them in machine gcode and default behavior is unaffected for those who have already changed settings for air filtration. From what I can see, this does exactly what it should be doing without any issues.
* make initial layer travel move acceleration and jerk configurable
* Update spelling to match UI pattern
* Update min integer and re-order to match patterns
---------
Co-authored-by: Thomas Scheiblauer <tom@sharkbay.at>
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Fix segfault in CLI mode when extruder/filament options absent
When slicing via CLI (--slice) with a BBL printer profile such as the
P1S, update_values_to_printer_extruders and
update_values_to_printer_extruders_for_multiple_filaments dereference
option pointers without checking for nullptr first, causing a SIGSEGV.
Root cause: printer profiles that have different_extruder=true (e.g.
P1S variants) trigger these code paths even in single-extruder CLI
invocations where filament_map, extruder_type, and nozzle_volume_type
options may not be present in the resolved config.
Fix: add null guards before dereferencing option<> / dynamic_cast<>
results, consistent with the pattern used in PR #12719. Log a warning
and return early rather than crashing.
Fixes CLI --slice segfault (exit 139) with P1S profiles.
Related: #12426, #12719
* Union ex brims
Revert "Union ex brims"
This reverts commit bbc9a39faf318dc2df093eb2bdcebf19a4162fe9.
Update Brim.cpp
* dont repeat paths
* Update Brim.cpp
* multimaterial brim independiente
* Normal brim if is by object
* fix print order
* cleaning 1
* cleaning 2
* Normal brim if multimaterial on first layer
* fix artifact
* combine_brim optional
refactoring
* refactoring gcode.cpp
* refactoring brim.cpp
Update Brim.cpp
* Remove multimaterial first-layer check for brims
Stop detecting extruders used on the first layer and remove the is_multimaterial_first_layer guard. Simplify can_combine_brims to only consider combine_brims and whether printing is ByObject, allowing brims to be combined across extruders unless printing by object or combine_brims is disabled. Cleans up unused code and simplifies brim-generation conditions.
* Remove material specification from unified brim comment
* Update PrintConfig.cpp
Previously, wipe tower behavior was determined by checking if the printer
was a QIDI vendor. This introduces a configurable enum (Type 1 / Type 2)
so any printer can select its wipe tower implementation. BBL printers
remain hardcoded to Type 1. Qidi profiles default to Type 1.
1. Dirty flags not showing for extruder options:
2. Crash when switching to non-first extruder tabs:
3. Modifying one extruder's parameter affects other extruders:
