Two follow-ups from #13744 review:
1. K2 firmware payloads reference "CR-PETG" by name (per DaviBe92's
reverse-engineering work in k2-websocket-re, and a real Creality spool
seen by @swilsonnc), but the profile was missing from the Creality
filament set. Adds 10 K2-family variants:
- K2: 0.4, 0.6, 0.8 nozzles
- K2 Plus: 0.2, 0.4, 0.6, 0.8 nozzles
- K2 Pro: 0.4, 0.6, 0.8 nozzles
Profile values come from CrealityPrint v7.1.0 via @hamham999's
parallel work in OrcaSlicer/OrcaSlicer#13581. Files re-indented with
tabs and BOM stripped to match repo convention.
2. Creality HF Generic PLA and Creality HF Generic Speed PLA were missing
filament_vendor: ["Creality"] so they appeared under "General" rather
than "Creality" in the filament selector.
Reported-by: swilsonnc, DaviBe92 (CR-PETG missing)
Co-Authored-By: hamham999 <hamham999@users.noreply.github.com>
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Import 191 brand-specific filament presets for the K2 family of
printers (K2, K2 Plus, K2 Pro), lifted from
CrealityOfficial/CrealityPrint v7.1.1 under AGPL-3.0 (compatible
with OrcaSlicer AGPL-3.0).
Brand coverage:
CR-series: CR-PLA, CR-PLA Matte, CR-PLA Fluo, CR-Silk,
CR-TPU, CR-ABS, CR-Nylon
Hyper-series: Hyper PLA, Hyper PLA-CF, Hyper ABS, Hyper PA-CF,
Hyper PA6-CF, Hyper PAHT-CF, Hyper PA612-CF,
Hyper PC, Hyper Marble, Hyper Stardust,
Hyper L-W PLA, Hyper PPA-CF
Third-party: eSUN PLA+ / PLA-HS / PLA-Matte / PLA-Silk /
PLA-CF / PLA-LW / PLA-Lite, PolySonic PLA /
PLA Pro, Panchroma PLA Matte / Satin, Soleyin
Ultra PLA, HP Ultra PLA, HP-ASA, HP-TPU
Ender PLA variants and CrealityPrint per-K2 Generic versions of
PLA, ABS, ASA, PA, PA-CF, PAHT-CF, PET, etc.
This closes the matching gap exposed by the CFS filament-sync
work. When the K2 reports spool brand Hyper PLA or CR-PLA, the
existing Creality vendor only had a generic Creality Generic PLA
@K2-all preset to fall back to, so per-brand temps / PA / cooling
tuning was lost on every sync.
Schema and naming are drop-in compatible -- CrealityPrint
references the K2/K2 Plus/K2 Pro machine names already present in
OrcaSlicer Creality vendor (Creality K2 0.4 nozzle, etc), so no
machine-side changes or compatible_printers rewrites are required.
K2 SE filaments and the PETG/PP/PPS/HIPS family are deferred. K2
SE machine profile is not yet in OrcaSlicer Creality vendor, and
the PETG/PP/PPS/HIPS family relies on fdm_filament_* base
templates that do not exist in Orca Creality vendor -- importing
those bases from CrealityPrint did not make them register as valid
parents at preset-load time. Coverage for the missing families
will land in a follow-up once the loader requirements for new
bases are understood.
Vendor version bumped to 02.03.02.75 to trigger the per-user
profile refresh on next launch. Source attribution captured in
resources/profiles/Creality/NOTICE.md.
* K2 Plus: add print area bounding box for adaptive bed mesh
The K2 firmware reads MINX/MINY/MAXX/MAXY gcode comments to
determine the adaptive bed mesh area. Without these, it falls
back to full bed mesh even when calibration is enabled.
K2 Pro also reads these comments (its profiles already had them).
Signed-off-by: Igor Mammedov <niallain@gmail.com>
* K2: add print area bounding box for adaptive bed mesh
Same change as K2 Plus — prepend MINX/MINY/MAXX/MAXY gcode comments
so firmware can determine the adaptive bed mesh area.
K2 Pro already had these.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
* Creality: bump profile version to 02.03.02.72
Signed-off-by: Igor Mammedov <niallain@gmail.com>
---------
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Fix Ender-3 V3 KE nozzle switching by adding printer_variant
The four Creality Ender-3 V3 KE 0.X nozzle profiles were missing the
printer_variant key, so OrcaSlicer could not map a UI nozzle selection
to a specific profile and reverted every choice to 0.2mm. Add the
matching printer_variant to each, following the CR-10 SE / K1C pattern.
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
* Profiles for Creality K2 Pro printer
Added printer profiles for Creality K2 Pro based on existing K2 Plus profile and Creality Print modifications.
* Fixed filament start g-code for K2 series
K2 Plus filament profiles have additional move for filament start g-code on some filaments. This causes unnecessary moves and make filament profiles non-working on K2 series printers.
As these moves are already mirrored on printer profile and not used in rest of the K2 series they should be removed.
* Update Creality K2 Pro profiles for improved print quality
Added adaptive probing comments to machine start gcode for all nozzle sizes. Adjusted process profiles for various layer heights and nozzle sizes, including changes to bridge speeds, acceleration, wall generator and support line widths according to Creality profiles s to optimize print quality and reliability.
* Revert "Update Creality K2 Pro profiles for improved print quality"
This reverts commit ac84058c33.
* Update Creality K2 Pro profiles for improved slicing
Adjusted speeds, accelerations, line widths, and other slicing parameters for better print quality and compatibility. Updated machine start g-code to include print area comments for adaptive probing (Creality K2 Pro uses these comments to define adaptive probing area)
* add creality ender-5 max
* add filament profiles for ender-5 max
* update creality manifest
* fix references
* put creality.json at 4 space indent
* remove invalid parameters
* fix thumb format
* Merge branch 'main' into feature/ender-5-max
* Replace M109 S[material_print_temperature_layer_0] with M109 S[first_layer_temperature]
* Change line width to match nozzle
* Change line_width for Ender-3 S1 Plus
* Update creality_cr10se_buildplate_model.stl
* Change line width to match nozzle size (Ender3v3SE)
* Fix Ender-3 S1 Plus 0.8 bed size
* Enable Z-hop for Ender-3 S1 Plus
* Trying something
* Update creality_ender3s1plus_buildplate_model.stl
* Fix CR-10 SE print size
* Various Flying Bear fixes
* Try fixing error
* Revert "Try fixing error"
This reverts commit e42e016e4a.
* Add minor Ender-3 V3 KE improvements
* Maybe this will fix the error?
* Revert "Maybe this will fix the error?"
This reverts commit 5e7873251b.
* Revert "Various Flying Bear fixes"
This reverts commit babca572dc.
* Fix CR-10 SE G-Code
Recommended by @bkonosky
* Minor changes to Ender-3 V3 KE
* Probe when bed is heated (Ender-3 V3 KE)
* Minor changes to Ender-3 V3 KE
* Fix oozing (Ende-3 V3 KE)
* Change retraction settings
* Use different retraction settings
* Revert "Use different retraction settings"
This reverts commit 854decf848.
* try this
* Remove "role_based_wipe_speed": "0",
* Add changes from CR-10 SE Config #4966
* Add "role_based_wipe_speed" : "0",
* Up retraction speed
* Missed this
* Resolve merge conflicts
* Resolve merge conflicts
* Change retraction & wipe speed
* Revert line removal
* Change wipe_speed to 200mm/s
* Forgot the 0.16mm
* Add BED_MESH_CALIBRATE PROBE_COUNT=6,6
* Improve for Matte PLA
* Compensate for fan speed
* Fix CANCEL_PRINT bug
* Move SET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 to start g-code
* Disable infill combination for 0.2 & 0.24
* Fix end G-Code
* Disable arc fitting
This fixes the merge conflict
* temp
* Revert "temp"
This reverts commit 4bbc028ade.
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update Creality Sermoon V1 0.4 nozzle.json
Changed the default process for the Sermoon V1 Printer.
* Update 0.20mm Standard @Creality Sermoon V1.json
Reduced speeds of .20mm process for Sermoon V1 to no more than 195mm/s as not all printers which may use this are running Klipper. It is set to Marlin for the flavour but is targeted at a Klippered printer.
* Update 0.16mm Optimal @Creality Sermoon V1.json
Remove Arc Fitting and reduce elephant foot.
* Update 0.20mm Standard @Creality Sermoon V1.json
Remove Arc Fitting and reduce elephant foot.
* Update 0.28mm Standard @Creality Sermoon V1.json
Remove Arc Fitting and reduce elephant foot.
* Add Creality Ender-3 S1 Plus
* Misc
* Fix nozzle_diameter
* Add printer_variant value
* Change build plate model/texture to use Ender-3 V3 SE
* Enable mesh leveling
* Up max travel acceleration to 5000
* Enable infill_combination
* Add Draft profiles
* Change buildplate model/texture
* Fix build plate model
* Add retraction & detraction speed & change retraction length
* Add filament_ to the beginning
* Revert retraction & detraction speed & retraction length
* Tests
Trying to change retract and detract speed as well as retraction length
Also trying to have Z-hop only happen on top layers
* Apply new values to other nozzles
* disable z_hop
* Lower build plate model
* Resolve merge conflicts
* temporarily remove Ender-3 S1 Plus
* Re-add Ender-3 S1 Plus
* Add CR-10 SE and standard profiles
* Misc
Add more perimeters to CR-10 SE profiles
Add printer to filament profiles
Link everything in Creality.json
* Fix two bugs
* Forgot this
* Add Ender-3 V3 SE .2, .6, .8 and fix small Ender-3 Pro bug
* Forgot to remove these
* Fix error
* Remove these...
* Why did I delete this?
* Revert deletion
* Add missing profiles
* Create 0.24mm Draft @Creality Ender3V3KE.json
* Apply new nozzle sizes to generic filament
* Maybe this will do it
* Revert 0.4 renames & add to Generic ABS
* Add M420 S1; Enable mesh leveling
* Fix wring nozzle_diameter
* Potentially fix the issue of printer not being added after selected
* Add Ender-3 Pro cover
* Add Ender-3 Pro
* Add Ender-3 Pro .2, .4, .6, and .8
* Add Ender-3 Pro processes
* Delete Ender-3 Pro_cover.png
* Add a smaller version of Ender-3 Pro_cover.png
* Delete Ender-3 Pro_cover
* Further image improvements
