Tommaso asked the question that names the real defect: if the sketch was open, why was
the same sketch shaded closed and offered for extrude? Because the two halves used
different tolerances. region_loops shades a region closed at 1e-3 mm; connected_loop
chained at 1e-3; the kernel welded at 1e-4 and OCCT matched vertices at 1e-7. The
2.28e-5 mm gap in the reported sketch did not cause that disagreement, it only made it
visible — and fixing the gap alone would have left the contradiction in place, ready to
reappear anywhere in (1e-4, 1e-3].
kSketchJoinTol now lives in SketchEngine.hpp and is the only place the number exists.
region_loops, loop_report, connected_loop and entities_to_wires all read it through
sketch_join_tol(). The viewport cannot promise a region the kernel refuses to build.
The welding is optional, because a kernel that silently closes loops should let you say
no: "Auto-close sketch loops" in Preferences, default ON, no restart. OFF means only
exactly coincident endpoints join — and since both halves read the same value, the
viewport simply stops shading the region closed, so an open loop is visible rather than
welded behind your back. No separate UI needed for that; it falls out of sharing one
number.
Details that matter. The kernel defaults to auto-close ON independently of the GUI, so
headless and MCP callers behave like the viewport instead of inheriting an unset
preference. With the tolerance at 0 the comparisons become <=, because OFF must mean
exact, not broken. OCCT never receives a zero vertex tolerance — it is clamped to
Precision::Confusion.
The preference is pushed from EVERY entry that starts a sketch session, not just
begin(): a Constrain session enters through begin_constrain / begin_constrain_entities
and uses region_loops and connected_loop, so a single push site would have left those
sessions running on whatever the previous one set. begin_imported_transform is excluded
deliberately — it works on imported regions, not chained entities.
Tests: a loop with one joint open by 9e-4 mm, given out of traversal order, builds a
closed four-edge wire; with auto-close off the same loop yields no wire; and an exactly
closed loop still builds with auto-close off, proving OFF means exact. Kernel 66104
assertions / 606 cases green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
The tab is now gated on a new enable_cad_feature app-config key, off by
default, exposed in Preferences under General > Features. When off, the
page is never created, so the Design-only camera option is hidden too.
Takes effect on restart, like the other feature toggles.
set_live_printer_agent centralizes
the swap: deselect the machine,
clear stale sidebar state and the
previous agent's Other Devices, then
install the new agent (or null when
its provider vanished). Plugin
load/unload callbacks refresh the
dropdown and re-run agent selection.
load_last_machine no longer falls
back to the first available machine.
A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
set_live_printer_agent centralizes
the swap: deselect the machine,
clear stale sidebar state and the
previous agent's Other Devices, then
install the new agent (or null when
its provider vanished). Plugin
load/unload callbacks refresh the
dropdown and re-run agent selection.
load_last_machine no longer falls
back to the first available machine.
A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
The stored plug-in identity is now the AA.BB.CC series (matching BambuStudio)
rather than the full build version, so the meaningless 4th build digit stops
driving config, the whitelist, filenames, and the version selector. This fixes
the macOS "can't switch to an older build" bug: the cloud endpoint is
series-keyed and only ever serves a series' newest build, so downgrade-by-
download was impossible and the download silently adopted the latest.
A startup migration normalizes an existing full-version config and file name to
the series form with no re-download, the loader resolves a bare series to the
newest same-series build on disk, and user-provided custom-named plug-ins
(libbambu_networking_02.08.01_custom.*) are still enumerated and loaded.
GUI_App::on_init_inner() carried the plugin dispatch policy inline (the
capability resolver and the slicing-pipeline dispatcher) and would grow
with every capability that fires from inside libslic3r.
plugin/PluginHooks.{hpp,cpp} now owns one file-local installer per hook,
aggregated by plugin_hooks::install() -- called from
PluginManager::initialize(), reset in shutdown() so no hook can enter
Python after the interpreter finalizes. The wx-side loader subscriptions
move into GUI_App::init_plugin_gui_wiring().
No behavior change; dispatch bodies moved verbatim.
* Store user session information along with refresh token, to allow offline use once user is logged in
* Don't bother with avatar because we won't see it when offline anyway
* Fix offline Sync Presets freezing the UI on repeat clicks
Ignore restart_sync_user_preset() while a manual sync's progress dialog is on screen, so a second app-modal dialog can't stack on the first. Offline the dialog blocks on a long, uncancellable HTTP timeout; on macOS the global menu stays live while the window is disabled, so a second click otherwise wedges the app (force-quit only).
* Skip redundant user-secret re-write on startup
set_user_session() always re-encrypts and writes the secret to disk; on the startup restore path that just rewrites the bytes it was loaded from. Add a persist flag so the restore path skips it. Also drop an unused catch binding and a stray blank line.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* init
* update translations
* clarify warning for rebuild
* auto fill issue field on github with gathered system information
* add detection for linux package type
* fix build errors
* update
* update
* improve reading windows version
* add multi file support for zip and use timestamp on exported zip name
* fix errors
* fix errorz
* fix URL encoding
* fix CPU info
* use home or desktop as default location
* fix distro name on flatpak
* improve detecting local build on linux
* check package type on all platforms
* optimize margins
* improve monitor detection
* add support for adding text file to zip and add system info on export
* exclude user related info from config
* improve exporting profile info
* fix linux monitor info
* update
* update detecting monitor info
* Update TroubleshootDialog.cpp
* Update TroubleshootDialog.cpp
* Update TroubleshootDialog.cpp
* revert scaling and resolution detection for linux
* include project file to zip and notify after saving zip successfully saved
* improve monitor info on mac
* update
* improve packing selection menu
* update
* Update TroubleshootDialog.cpp
* Update TroubleshootDialog.cpp
* Update TroubleshootDialog.cpp
* Update TroubleshootDialog.cpp
* update
* update
* make hash clickable
* fix compatible process counting
* export profiles overview instead copying to clipboard
* auto restart app after cleaning system folder
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* fix: 409 conflicts resolution in notifications
* fix: silently log other http errors
* fix: pass force push flag to start_sync_user_preset
* remove formatting churn
* fix: propagate force push down put_setting
* refactor render_hyperlink_action to PopNotification for reuse
* fix an issue that hold status should be cleared before force pushing.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Added UI force-sync button and fixed bug that didn't sync in one case and caused orange highlight
* Fix sync preset race: join old thread before starting new one
---------
Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* feat: add UI feedback on http error and some logs
* spelling fix
* show error dialog only once per session
* show errors with plater notification when on developer mode
* remove return
* remove irrelevant logs
* Add OrcaCloud sync platform and preset bundle sharing system
Introduce OrcaCloud, a cloud sync platform for user presets, alongside
a preset bundle system that enables sharing printer/filament/process
profiles as local exportable bundles or subscribed cloud bundles.
OrcaCloud platform:
- Auth to Orca Cloud
- Encrypted token storage (file-based or system keychain)
- User preset sync with
- Profile migration from default/bambu folders on first login
- Homepage integration with entrance to cloud.orcaslicer.com
Preset bundles:
- Local bundle import/export with bundle_structure.json metadata
- Subscribed cloud bundles with version-based update checking
- Thread-safe concurrent bundle access with read-write mutex
- Canonical bundle preset naming (_local/<id>/... and _subscribed/<id>/...)
- Bundle presets are read-only; grouped under subheaders in combo boxes
- PresetBundleDialog with auto-sync toggle, refresh, update notifications
- Hyperlinked bundle names to cloud bundle pages
Co-authored-by: Sabriel Koh <sabrielkcr@gmail.com>
Co-authored-by: Derrick <derrick992110@gmail.com>
Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com>
Co-authored-by: Ian Chua <iancrb00@gmail.com>
Co-authored-by: Draginraptor <draginraptor@gmail.com>
Co-authored-by: ExPikaPaka <112851715+ExPikaPaka@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ocraftyone <Ocraftyone@users.noreply.github.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: peterm-m <101202951+peterm-m@users.noreply.github.com>
* Fixed an issue on Windows it failed to login Orca Cloud with Google account
Since we now target wxWidgets 3.3, all wxCHECK_VERSION(3,1,N) checks
are always true. Remove the guards keeping only the true branches:
- I18N.hpp: Remove version guard around _wxGetTranslation_ctx macro
- ExtraRenderers.hpp, GUI_App.hpp: Simplify SUPPORTS_MARKUP to check
only wxUSE_MARKUP (version check always true)
- ConfigWizard.cpp: Remove manual wxArrayInt comparison fallback
- SendSystemInfoDialog.cpp: Simplify display scaling guard to _WIN32 only
- GUI_Utils.cpp: Remove IsDark() fallback using luma approximation
- wxinit.h: Remove legacy wxEVT_BUTTON and wxEVT_HTML_LINK_CLICKED
compat macros (these event names exist natively in wx 3.3)
* Add read support for Google's Draco (.drc) format.
* Fix build on Linux
* Use boost instead of fstat.
* Switch to boost memory-mapped file to save RAM and potentially improve performance.
* Trim trailing whitespace.
* Initial Draco write support.
Currently always exports with 16-bit precision and speed 0 (best compression).
The back-end function does have arguments to specify them, it's just not hooked into the GUI.
* Add Draco to the About dialogue.
* Fix Linux compile (hopefully)
* Add an option to associate DRC files on Windows.
* Implement a Preferences option to set Draco position quantization bits
* Update src/slic3r/GUI/Preferences.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Some slight changes to ianalexis's suggestion.
* Implement a create_item_spinctrl() function for numeric inputs, and use that instead of create_item_input().
* Move "bits" to inside the spinctrl box.
* Refactor following yw4z's feedback
* Update src/slic3r/GUI/Preferences.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Change to 0 bits as the default setting for Draco export precision.
* Change to a lossy checkbox and a bits field with a range of 8-30.
* Proper SpinInput code from yw4z
* Revert "Proper SpinInput code from yw4z"
This reverts commit 7e9c85f31a.
* Revert "Change to a lossy checkbox and a bits field with a range of 8-30."
This reverts commit d642c9bcc0.
* Redo preferences based on SoftFever's feedback
* Refactor to minimize code duplication
* Fix padding
* Improve Draco export quality level tooltip clarity
Clarify that 0 means lossless compression (not uncompressed),
document the valid lossy range (8-30), and better explain the
tradeoff between file size and geometric detail.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
peachismomo