* build: enable /Zc:lambda for MSVC
MSVC keeps its legacy lambda processor under /std:c++17, which rejects
reading a constexpr constant inside a lambda that does not capture it
(C3493). No other compiler requires that capture, and clang reports it as
an unused one, so the two cannot both be satisfied without the flag.
/Zc:lambda selects the conforming lambda parser that clang and GCC
already use. It is implied by /std:c++20 and /permissive-, so it is only
needed while we are on C++17. clang-cl is conforming already and does not
take the flag.
It requires VS2019 16.8, so build_release_vs.bat now says 16.8+.
* build: clear 237 unused lambda capture warnings
236 captures across 81 files, 142 of them `this`. Removing an unused
capture changes no behavior; clang does not report a capture whose type
has a non-trivial destructor, so nothing held only to extend an object's
lifetime is in this set.
Nine of them are the second half of the warning, "is not required to be
captured for this use", where the capture is a const or constexpr value
the body does read. Those depend on the /Zc:lambda change in the previous
commit. One of them, in FillRectilinear.cpp, had been worked around with
an #ifndef __APPLE__ guard around the capture list, which is now gone.
GUI_ObjectTableSettings.cpp captured its reset button only to read it
inside #ifdef __WXOSX_MAC__. That branch now takes the button from the
event it is already handling.
* build: fail configure on MSVC older than 19.28 instead of dropping /Zc:lambda
cl.exe answers an unrecognized /Zc: sub-option with warning D9002 and keeps
going, so on VS2019 before 16.8 the flag is silently ignored and the build
instead dies with C3493 in FillRectilinear.cpp, nowhere near the cause.
* fix: delete three locals that are now unused
Their only remaining use was the lambda capture this branch removed. The
Clang builds set -Wno-unused-variable, so the build never flagged them.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* build: remove std::move that blocks copy elision
std::move wrapped around a temporary, or around a local being returned,
stops the compiler constructing it in place. Each edit is the fix clang
suggests, which is to delete the std::move call and keep its argument.
Three of the 39 sites save a move, the two return std::move(local) in
Print.cpp and TreeSupport.cpp:2749. The rest are equivalent either way
and match how the codebase already writes this elsewhere.
Clears 39 -Wpessimizing-move warnings.
* build: drop null checks on references and this
A reference cannot be bound to null and this cannot be null, so the
compiler folds these conditions to true and drops the guard. Seven are
if (&bitmap && bitmap.IsOk()), where IsOk() already does the work; two
test this directly. The guarded code runs either way, so removing the
dead operand changes nothing.
Clears 11 -Wundefined-bool-conversion warnings.
Catches the fork up from 449a4cf9fc (2026-06-28) to d6cb667b89 (2026-07-24).
Upstream touched 2326 files; 17 of them overlap the 164 this branch touches.
16 of the 17 auto-merged, including all three CMakeLists.txt, the build_all.yml
CI workflow, and every GUI file. The CAD core never conflicts: CadDocument,
SketchEngine, SketchSolver, McpControl and test_caddocument are files this fork
adds, so upstream does not touch them.
The one conflict, tests/libslic3r/test_3mf.cpp, was purely additive in all three
hunks and is resolved as a union: our test pinning that store_bbs_3mf embeds the
CAD recipe as Metadata/SnapOrca_cad.bin, upstream's multi-nozzle plate-metadata
round-trip tests, and both sets of includes. All three were verified present
after resolution rather than assumed.
NOT BUILD-VERIFIED, for a reason that predates this merge and is not caused by
it: this fork cannot be configured on nativedev at all. Its CMakeLists has
required Eigen3 5.0.1 since before the merge (line 592 pre-merge), while the
only deps image on the machine is snaporca-deps, built for snaporca's
find_package(Eigen3 3.3). CMake fails at configure, so nothing compiles.
That means this fork's Catch2 suite has never run. Every "suite green" figure
recorded for M1-M8 was snaporca's suite; the ports were verified by patch-apply
plus the CAD sources being byte-identical to snaporca's. Building an orca_cad
deps image with Eigen 5.0.1 is what would finally close that gap.
Pre-merge state is preserved at branch cad-mainline-pre-upstream-2026-07-25
(30d54f0074).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Dual-fork mandate: port the parametric-recipe 3MF persistence from
snaporca-cad commits ed19eac+147e1c4 so a saved project reopens with the
editable CAD feature tree, not just the baked mesh.
Shared kernel/format/GUI (identical to snaporca-cad):
- CadDocument serialize_recipe/deserialize_recipe (cereal BinaryArchive,
versioned) + CadFeature split save/load + imported_solid<->BRep string.
- Model::cad_recipe carried through 3MF zip entry Metadata/SnapOrca_cad.bin
(writer + binary-verbatim reader branch).
- DesignPanel on_commit() stamps the recipe; on_tab_shown() rehydrates a
loaded project via load_recipe() (deserialize -> feed_bodies + refresh_tree).
Mainline-only adapters (no snaporca-cad counterpart — Catch2 v3 vs v2):
- tests/libslic3r/test_caddocument.cpp: <catch2/catch_all.hpp> +
`using Catch::Approx;` (v3 scopes Approx under Catch::).
- tests/libslic3r/CMakeLists.txt: register test_caddocument.cpp (the
original CAD port had left it out of the test build).
Verified on behemoth (snaporca-deps toolchain): libslic3r_tests clean;
[CadDocument] 17/18 (only the pre-existing tangent-to-circle SIGABRT fails,
identical to snaporca-tkz); K1 serialize round-trip + version-reject pass
(13 assertions); new [3mf] "CAD recipe blob survives a 3mf save/load cycle"
passes byte-for-byte; orca-slicer GUI links clean (186/186, DesignPanel.cpp
compiled). Interactive :10 click-through pending (no Design-tab automation).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Switching to a printer with fewer filaments (e.g. H2D -> X2D) threw
std::out_of_range in check_filament_printable. Clear stale per-volume
extruder config on count shrink and bound-check filament indices at the
read sites.
* Using bbs versioning for bbs atributes
* Orca tags
* Bump SLIC3R version to match current BBS
* New import logic
* to_string_sf
* 2.3.2 No tagged
* Update comment
* identified code for snapping to buidlplate
* rename internal name to ensure_on_bed to be consistent, saves option in 2mf, finish Move UI, use in both ensure_on_bed() functions
* makes auto_drop a per-object setting, removes global setting
* remove adUndef, add auto_drop to constructor/serialize
* fixes drop() button
* add "auto_drop" checkmark to "load as single object" dialog,
nothing changes if auto_drop == yes || "load as single object",
if auto_drop == false and "load as single object" == false the objects now retain their relative position to each other
* retains auto_drop (and printable) state when assembling or splitting objects,
adds ObjectList::printable_state_changed() overload to be able to only provide ModelObject* vector
* adds dialog when splitting to ask if auto_drop should be disabled,
only shows when auto_drop enabled and atleast one volume floating
* adds arrow indicator on bounding box if auto_drop == false
* removes unneeded code, keeps "auto_drop" naming consistent
* makes for loop simpler in set_printable, set_auto_drop and get_auto_drop,
makes get_auto_drop const,
fixes wording in Snapshot text
---------
Co-authored-by: Hanno Witzleb <hannowitzleb@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* fixes: keys_map is initialized with itself [-Winit-self]
* fixes: operation on repeats may be undefined [-Wsequence-point]
* fixes: warning: suggest parentheses around && within || [-Wparentheses]
* fixes: moving brim_points to itself [-Wself-move]
* fixes: operation on unprintability may be undefined [-Wsequence-point]
* fixes: extra tokens at end of #endif directive [-Wendif-labels]
* fixes: converting to non-pointer type int from NULL [-Wconversion-null]
* review result: simplifies fix 'operation on repeats may be undefined'
* Add read support for Google's Draco (.drc) format.
* Fix build on Linux
* Use boost instead of fstat.
* Switch to boost memory-mapped file to save RAM and potentially improve performance.
* Trim trailing whitespace.
* Initial Draco write support.
Currently always exports with 16-bit precision and speed 0 (best compression).
The back-end function does have arguments to specify them, it's just not hooked into the GUI.
* Add Draco to the About dialogue.
* Fix Linux compile (hopefully)
* Add an option to associate DRC files on Windows.
* Implement a Preferences option to set Draco position quantization bits
* Update src/slic3r/GUI/Preferences.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Some slight changes to ianalexis's suggestion.
* Implement a create_item_spinctrl() function for numeric inputs, and use that instead of create_item_input().
* Move "bits" to inside the spinctrl box.
* Refactor following yw4z's feedback
* Update src/slic3r/GUI/Preferences.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Change to 0 bits as the default setting for Draco export precision.
* Change to a lossy checkbox and a bits field with a range of 8-30.
* Proper SpinInput code from yw4z
* Revert "Proper SpinInput code from yw4z"
This reverts commit 7e9c85f31a.
* Revert "Change to a lossy checkbox and a bits field with a range of 8-30."
This reverts commit d642c9bcc0.
* Redo preferences based on SoftFever's feedback
* Refactor to minimize code duplication
* Fix padding
* Improve Draco export quality level tooltip clarity
Clarify that 0 means lossless compression (not uncompressed),
document the valid lossy range (8-30), and better explain the
tradeoff between file size and geometric detail.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Get libslic3r tests closer to passing
I can't get geometry tests to do anything useful. I've added extra
output, but it hasn't helped me figure out why they don't work
yet. That's also probably the last broken 3mf test doesn't work.
The config tests were mostly broken because of config name changes.
The placeholder_parser tests have some things that may-or-may-not
still apply to Orca.
* Vendor a 3.x version of Catch2
Everything is surely broken at this point.
* Allow building tests separately from Orca with build_linux.sh
* Remove unnecessary log message screwing up ctest
Same solution as Prusaslicer
* Make 2 TriangleMesh methods const
Since they can be.
* Move method comment to the header where it belongsc
* Add indirectly-included header directly
Transform3d IIRC
* libslic3r tests converted to Catch2 v3
Still has 3 failing tests, but builds and runs.
* Disable 2D convex hull test and comment what I've learned
Not sure the best way to solve this yet.
* Add diff compare method for DynamicConfig
Help the unit test report errors better.
* Perl no longer used, remove comment line
* Clang-format Config.?pp
So difficult to work with ATM
* Remove cpp17 unit tests
Who gives a shit
* Don't need explicit "example" test
We have lots of tests to serve as examples.
* Leave breadcrumb to enable sla_print tests
* Fix serialization of DynamicConfig
Add comments to test, because these code paths might not be even used
anymore.
* Update run_unit_tests to run all the tests
By the time I'm done with the PR all tests will either excluded by
default or passing, so just do all.
* Update how-to-test now that build_linux.sh builds tests separately
* Update cmake regenerate instructions
Read this online; hopefully works.
* Enable slic3rutils test with Catch2 v3
* Port libnest2d and fff_print to Catch2 v3
They build. Many failing.
* Add slightly more info to Objects not fit on bed exception
* Disable failing fff_print tests from running
They're mostly failing for "objects don't fit on bed" for an
infinite-sized bed. Given infinite bed is probably only used in tests,
it probably was incidentally broken long ago.
* Must checkout tests directory in GH Actions
So we get the test data
* Missed a failing fff_print test
* Disable (most/all) broken libnest2d tests
Trying all, not checking yet though
* Fix Polygon convex/concave detection tests
Document the implementation too. Reorganize the tests to be cleaner.
* Update the test script to run tests in parallel
* Get sla_print tests to build
Probably not passing
* Don't cause full project rebuild when updating test CMakeLists.txts
* Revert "Clang-format Config.?pp"
This reverts commit 771e4c0ad2.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* New materials
* Temps
* Full filament type list
* Improve nozzle temperature range validation messages
Separates minimum and maximum recommended temperature warnings for nozzle configuration + generig °c usage.
Co-Authored-By: Alexandre Folle de Menezes <afmenez@gmail.com>
* Material Updates
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* petg-cf10 should be petg-cf
options.
* Pla reduced range
* Adjust some temps
* FilamentTempType Temperature-based logic
* chamber temps
* Fromatting
* Filament chamber temperature range support
Introduces get_filament_chamber_temp_range to retrieve safe chamber temperature limits for filament types. Updates ConfigManipulation to use these limits instead of hardcoded values.
* add adhesion coefficient and yield strength
Replaces hardcoded material checks for adhesion coefficient and yield strength with lookup functions using extended FilamentType struct.
* Thermal length
* Fix
* Refactor filament type data to MaterialType class
Moved filament type properties and related lookup functions from PrintConfig.cpp into a new MaterialType class.
* Fix adhesion_coefficient
Co-Authored-By: SoftFever <softfeverever@gmail.com>
---------
Co-authored-by: Alexandre Folle de Menezes <afmenez@gmail.com>
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
SoftFever