Can't delete nodes with no children, otherwise the parent-child relations may be corrupted.
Jira: STUDIO-3737, MAK-1557
Change-Id: I1de39e182bac4a55a8739c00e59fdf7b9b5e4dfb
(cherry picked from commit 8ad53b9fc16362e5bac1f649b53f4f0eba1edc1d)
Previously holes of enforcer_polygons was taken as contours,
which caused enforcers inside a hole were too large.
Jira: STUDIO-3877
Change-Id: If38c34e2469b822012a2ed0b082783563fe99228
Previously holes of enforcer_polygons was taken as contours,
which caused enforcers inside a hole were too large.
Jira: STUDIO-3877
Change-Id: If38c34e2469b822012a2ed0b082783563fe99228
Remember C10 is for traditional timelapse, C11 is smooth timelapse.
The mother profile of all machines should be right.
Change-Id: Ia941f743d2a81ef4b5b4fa08a37ca654eb86d0d7
Enforcers should also subtract the lower polygons to get overhang areas.
Jira: STUDIO-3692
Github: #2045
Change-Id: I70f4aaae13826efc624e9bc942d2d11e9b1df1a1
(cherry picked from commit fc3d9b24ac1eb14e259488c94fca3469f319b368)
1. We have a logic to add supports at corners for tree(auto), now I extend
it to tree(manual) also.
2. Only show support_critical_regions_only option to tree(auto).
Github: #2008
Change-Id: I161444da93464fd2ef0e0f3b40a0c5852beba351
(cherry picked from commit af4efb4aadc2a4d16de3eea881c6610955985fff)
Only use MCut to do boolean, with a little modification to allow input
mesh to have multiple components.
Jira: STUDIO-3167
Change-Id: I4f53010f76fbcacfe966c2ef48e465f97d6516fe
(cherry picked from commit 92d0eb11744820466ee2f67c02d4764e496b7e60)
Previously tree supports are harder to remove than normal
supports. We learn from normal supports and improve the gap between
object and supports.
Jira: STUDIO-3530
Change-Id: I229a7b869b334bdf4c5aba96c9450213b83457f2
brim bounding box is now shifted w.r.t. plate origin, need to modify the
no-brim shift the same way.
Change-Id: Iefa7287e2848aadbfc4a468bca394ecec48a1e7c
1. Don't use mcut on splitable volumes
2. If MCut fails, try again with CGAL.
Change-Id: I55d352b166633db9e4548b5c9e6913cf931f5f8f
(cherry picked from commit c1bde5358524d2291db6efa584ff072308ed9d20)
When there are multiple empty layers needs to be replaced, error_msg is
assigned multiple times simutaneously by tbb, which causes problem.
Jira: STUDIO-3320
Change-Id: I52a48c9fe284d15aeb8e4e9e5d1db7e0c3321ad6
(cherry picked from commit fba54c063637a1bab4d835e2e5f8558b2affa4e6)
1. When the option is not set, print.full_print_config() is empty, so we
can't access opt_bool("scan_first_layer") or opt_bool("enable_support").
Should use wxGetApp().preset_bundle->full_config() instead.
Jira: STUDIO-3264
2. Allow different object having different brim_width to encode support's brim width.
In this way the arranging logic is simpler and more objects can be arranged in a plate.
Change-Id: Ic7178652147b0519d50b2eb9ceb214b4ef4c0251
(cherry picked from commit 0f163d59b40009cd29b8b1e32f730258ad0786dc)
Do not do final align for filling in bed.
Jira: STUDIO-3265
Change-Id: I2ce2ebed575ba05b1d78ec89923f8e91c4de6648
(cherry picked from commit 581aa4fd0ff1c6f64026d7b934d4bd8a79b803ae)
Flow calibration on PEI plate may fail. To reduce users' confusion, let it be off by default.
Change-Id: Ic31f18b5fd378ac8b20e4d1461ed3dbfbae1ae4b
(cherry picked from commit bc8b4cb082f20984207f44e63104be9a603a2332)
Apply boolean operation on parts. No need to export stl to apply.
Change-Id: I14479d0977e5ec6f5f80f55b22ed02974b8271c7
(cherry picked from commit 14fe96b2b7529380832007a3d3eb93eb8b9a5217)
If support_on_buildplate_only is enabled, and a node will fall into the object,
this node should not be a normal node.
Jira: STUDIO-3047
Change-Id: I65dc6d69d28729732907111c3b34b4d32edff806
(cherry picked from commit d04dc35d45c171e20899cb391d3b192fa123c10e)
Small overhang diameter threshold is reduced,
and use bounding box size instead of area for final decision.
Github: issue 1681
Change-Id: Iabbb49dfc47345bb609214749104c808608c4d65
This popup dialog was introduced to promote tree slim
style. Now it's time to remove it.
Change-Id: I34c0be56b4dc613e6e991dd87ab22eb4eaa1feb3
(cherry picked from commit 827c692a1877bfec914ef8f5a55c7357ed6e94d2)
1. Previously if there are multiple sharp tails in a layer, some will be
missed. To fix this, we should not skip if the current layer is already
detected as sharp tails.
2. Do not mistakenly detect sharp horns as sharp tails by only detecting
the overhang areas larger than half of the extrusion line width.
Github: #1578
Jira: STUDIO-2659
Change-Id: If7ba5c9ae547d3051551aa6fa34eb6214d01a46d
CGAL to 5.4
TBB to 2021.5
OpenVDB to 8.2
Change-Id: I08992fce104e6f56001643c3c5dbf6c3f59ffc3d
(cherry picked from commit 1571f176fc37dda1c3e889776e13fa49bba4ae42)
Multi-material arranging is more compact by redefining same_color_with_previous_items:
if the colors of previous items are a subset of current object's colors, or vice versa.
Either of the two cases will not increase the total number of colors of the plate.
Jira: STUDIO-2871
Change-Id: I7cbe0835408d306084490b4849d03bb9fb617d2b
(cherry picked from commit d58702e9c0db54bcd123739298ce6dc03f5ca1a5)
This is caused by the inverse-order polgyons after mirroring. Adding
a union_ before offset_ex fixes this bug.
Github: #1621
Jira: 2738
Change-Id: I885a3ca6af4e5fadb2158d913cf67525bfffa91e
(cherry picked from commit 4ea95d89e7ec058ac21218e1839cfe16b486893a)
In normal support, contact_polygons were slightly larger than allowed region, so sampling to the wrong points, which were then removed when "on buildplate only" was turned on.
Jira: STUDIO-2742
Github: issue 1352
Change-Id: I2f131bac48eb30997f37818f312da3386516a5ea
(cherry picked from commit ed25a89c0e8c5358ea803344fbce482be172d2ee)
This reverts part of the commit d4490af, because redo slicing is unacceptable after changing support params.
Known issue:
Bottom surface type depends on support parmas, that's why we add the steps dependency of slicing against support params in commit d4490af.
With this commit, bottom surface type may not be right with the initial params, and the user can't do anything to make it better.
Change-Id: Iff079c4d1205b8a07468be6396990fe87634a3fe
(cherry picked from commit c663a844629c07dd40973832df4e4d1e1827235a)
1. Instead of smoothing top-down, now we smooth tree branches bottom-up, and do not stop at merged nodes.
2. Fix a bug where some nodes don't have child. This is critical for bottom-up smoothing.
Change-Id: Iac0fecd81dac541ca390bcf5cbdfe7fd66cfd3a2
(cherry picked from commit 536a8a4f0ef76fa0358f4b4b181c4c7e7fff8bc7)
We increase the smooth iterations from 1 to 50.
Change-Id: Iba883fd67d7a9a71c92b364dcc9b76e00fc45820
(cherry picked from commit 945fba20a5629148bfd8cee47f492d42c50f9824)
Tree Strong is too similar to Tree Slim and people don't like it.
Jira: STUDIO-2660
Github: #1579
Change-Id: I52d7e8e674f0fc332e4ab2813261ffbc4b4cfb7a
(cherry picked from commit 9eb209b4c1737d2f10b9b8bd78c9f876f3d32bce)
tan(90\degrees) is too large and will make detect_overhangs very slow.
Jira: STUDIO-2620
Change-Id: I55901a6bc1b56216549f66e1a7e77c0da680997b
(cherry picked from commit e58cc8a4665808580e84107f54661447000d64f3)
Cantilever detection should be done layer by layer, instead of using
merged_poly of clusters.
Jira: STUDIO-2198
Change-Id: Ifea017fc4c13425a944ee80f7dedb603a8e14cc2
(cherry picked from commit 0803a439a458ffeb9c6d91e90344a5b78794a6bd)
1. Only draw infill in normal nodes of hybrid support.
Previously when hybrid support was selected, all nodes would have
infill including the circle nodes which don't need infill. Now we draw
infill only when there are normal nodes.
2. Move remove_bridge after small overhang removal because the trimmed
bridge may be detected as small overhangs.
3. Only split circle nodes in draw_circles to prevent floating circles.
4. Fix the issue where tree support infills may not be aligned,
which is caused by the changing spacing of filler.
5. Fix a bug where lightning infill in tree support may crash.
Note: it is still not prepared to set lightning infill as default,
as for some models the generation time of lightning infill is still
too long.
Change-Id: I556e5097041d09afae1e2957d4dc9914d4610149
(cherry picked from commit 4c0849a81b60cde0c3b8ca54f03f63ea7c62dcd9)
1. Fix sharp tail detection in normal support.
The not operator in front of overlaps was missing.
2. Fix bridge removal.
After adopting Prusa's smart bridge direction detection, the bridge
angle may be pi, so our previous method (comparing angle to 0 and pi/2)
was not right. Now we simply check if the bridge direction normal vector
is aligned to x-axis or y-axis.
Change-Id: I4e1fd937e432aca97cdd374ba66a0d869794126e
(cherry picked from commit c0d82003a5e4c44345219294072c54051fc5711a)
1. improve sharp detection for small regions.
When the region is around 1 extrsion width, previous method may miss some sharp tails.
Now we reduce the width threshold to 0.1*extrusion_width for sharp
tails.
When checking "nothing below", need to expand the poly a little. Example:
benchy.
2. improve is_support_necessary.
Only popup warning for sharp tail and large cantilever (longer than 6mm).
Jira: STUDIO-2567
Change-Id: I5e977e7766b35409891d1b41e36278e3f07fa372
(cherry picked from commit c9d8a7c1c3bbd4367c7fc44408c67e5c534167f4)
Similar to tree support, make as many steps parallel as possible.
Jira: STUDIO-2525
Change-Id: Iee310bbf6911d8d3e4262ee8ed6bd133d09670a9
(cherry picked from commit 3798f1a3ecb85bbfb81925b3702fb4384e18994d)
1. tree support style default to Tree Hybrid
2. fix an assert bug with MedialAxis::build:
assert(polyline.width.size() == polyline.points.size() * 2 - 2)
This is caused by the incorrect clear function of ThickPolyline.
Change-Id: I8d6507ad366d253493e2749e0cbac8d3d837ee8a
(cherry picked from commit bd31e962c11e82005944bef40b17471075e79898)
1. Parallelize the majority of overhang detection, leaving only a small
part of sharp tail detection as sequential. This strategy makes
is_support_necessary 10 times faster.
2. Use the overlaps function to detect overlapping, instead of using
intersection().empty()
3. Control the max recursion depth to prevent crashing due to too deep
recursion.
Jira: STUDIO-2445, STUDIO-2458
Change-Id: I35283da3e4a22d7afe251b804ce30b90a9d754df
(cherry picked from commit 1a6fedd1a0c82906f1807234ea1b816247ca6fd7)
m_hull_2d_cache must be set since later on we'll use its point number, which is a very large number when not inited.
This will cause a fatal out-of-memory error.
Jira: STUDIO-2452
Change-Id: I9b397a53bdcdf555eccf745f1b96786010ebe309
(cherry picked from commit 6802be53709649e75a1562d29e14559c766d427b)
offset may give empty results.
The previous patch solved the issue that the studio crashes immediately when selecting by-object printing.
This patch solves the issue that the studio crashes when moving objects with mouse after selecting by-object printing.
Jira: STUDIO-2452
Change-Id: Iacd69e67386b0750f24e5af2799ff9c0da130e88
(cherry picked from commit 8ea4379d0b6d61e91bd6704e4b1e8309cb42b924)
offset may give empty results.
Jira: STUDIO-2452
Change-Id: I4da9689dc3e22afcb2340ce0f9956237e4aab434
(cherry picked from commit 3f33979a79c720fcaddb5b850ec278b3deaf2417)
1. In small overhang detection, some sharp tail cases are missed because
the max_layer was not compared.
2. In normal support, previously the lower layer's expolys were not right,
should only keep the ones that won't vanish when extruding.
Jira: STUDIO-1977, STUDIO-2200
Change-Id: Ia09ff1ab4870b7e3c199a827932536867644c76c
(cherry picked from commit e3ba3a3114821e951d6eb00b4c95e6e63ffe00d4)
1. It seems there are a lot of buffered frames in IP CAM. Have to
wait enough time untill all buffers are flushed.
2. From watermellon's suggestion, increase travel speed duing layer
change, to save time and reduce oozing.
JIRA: STUDIO-2167
Change-Id: Ia2ec0bde216e90207897c00c395f7e02ea2fe342
(cherry picked from commit 9c85a7c68617b1628e1698912da20f1ebc69ec16)
It's not necessary to pause before photo-shooting, but after it.
Pausng by 50ms should be enough.
Jira: STUDIO-2167
Change-Id: I88ba5db1d6cce390ae5e26ac03533b0ee277b5bd
(cherry picked from commit ae34c0b9e875d1e52798a5359b0cce2151942fb8)
1. use tree slim's merge strategy in hybrid support
2. do not break bridge in hybrid support
3. fix "support on buildplate only" not working. The cause is: with
independent support layer height, contact_nodes are not synced with
object layers, so the previous way of accessing contact nodes in
unsupported_branch_leaves no longer works. To fix that, we add
obj_layer_nr.
Jira: STUDIO-2250
Change-Id: Idfc9b0bb10425de6414f7eae2cf5467cedf1d669
(cherry picked from commit 8780d5a7e92e298cbbccbb3bd1825197d387a340)
A bottome surface is detected as stBottom only if:
1. has support, top z distance=0 (soluble material), auto support
2. for normal(auto), bridge_no_support is off
3. for tree(auto), interface top layers=0, max bridge length=0, support_critical_regions_only=false (only in this way the bridge is fully supported)
Note:
Since now the surface type depends on more parameters, changing them will trigger re-slicing and making the whole process slower.
github issues: 1253
Change-Id: I0fe719e0dbf7147206008c8726dd9c7be2b19226
(cherry picked from commit d4490afa6b9e4fbb583033a125bbebb50dc5f0bb)
Arranging multi-color objects with disabled
multi_materials_on_same_plate option was not currect.
Previously we only consider the first extruder id for multi-color
objects. Now we consider all extruders.
Jira: STUDIO-2164
Change-Id: If64ff4f88f0fe4f6c31ebf657b3449b19bf063f0
(cherry picked from commit f4f6bdd00a0c3d3e13406b69be9b5b0468b27d44)
1. fix unsupported cantilever was not warned. We need to set support
type to stTreeAuto in is_support_necessary() to fully utilize the
power of feature detection.
2. fix tree support not generated on non-first plate.
Change-Id: I5b8aa827c9d62df0119db4e8e9212f33ce75ddaa
(cherry picked from commit 60f21b6fcb45fe56f7fc867a7fcad433282bc055)
So tree supports won't go outside the bed.
Known issue:
1. moving won't trigger support re-calculating, so if you want to
clip the supports in a different way after moving, you need to change
the support settings (eg change threshold angle to 31 degrees).
2. clipping with the occlusion region is not complete, and an error
message of "outside toolpath" will still be popped because we use
convex hull to detection confliction.
Jira: STUDIO-2036
Change-Id: I643b14618eb18ffa9825072c44f677e51b0ff937
(cherry picked from commit a6217824dc0f490027e16f80f810d176dec6004b)
Support layers should be released in is_support_necessary.
Jira: STUDIO-2120
Change-Id: Id1c6fa2d8635e55be745095408dfbac38a25efa6
(cherry picked from commit f911e8d084c4fa273f8c9211112fa2f83515cfb1)
Use tree support to detect if there are sharp tails and so on.
Jira: STUDIO-1898
Change-Id: I148e14ca4024849875133a646a8fdd36c265b2fb
(cherry picked from commit bc74015d45e96e409d34d611876e3a24e289e029)
Tree support didn't fill the first layer when the tree is too short
udesk: 0284
Change-Id: I2702b26733e7360445e19847abb48f75f173da4e
(cherry picked from commit e317f9e19fbbfe21efb495e23a8ff78661bfee79)
1. add gcode command for void printing detection
2. fix the issue that the toolhead is not at excess chute position when
smooth timelapse ends, by adding 2s pause after M991 command.
Jira: STUDIO-1996
Change-Id: I40cf16116e742744cea9bd90969e556a9ea2b2f1
(cherry picked from commit 2fbf7ffe6b1bd8850a76e229ff91750c689721b9)
Previously we used layer_nr-1 as the next support layer below layer_nr,
which was not right when we used independent support layer heights.
And this would make it difficult for the tree branche to avoid the object.
Change-Id: Ic705fbd093e4bd555470646044380703ca259904
(cherry picked from commit 245e1cf4fd071b1f1fea4c5d616ff87432a76911)
1. When sharp tail region suddenly grows a lot, it means it connects to
a well supported region and is no longer a sharp tail.
Jira: STUDIO-1862
2. First layer of sharp tail can not be reducible (must have extrusion,
i.e. won't disappear after slicing), otherwise thin spikes at the
top of the object are also treated as sharp tails.
Model: knight_seadra
3. Increase sharp_tail_max_support_height to 16mm
Model: Crane_reversed
Jira: STUDIO-1859 (for this issue I don't what is the exact cause,
but adding these three improvements solves the problem)
Change-Id: I3cd57b184d78dba8862ab3c214057ae78fe49d1f
(cherry picked from commit 9242c6a6d1f23f11ebc43a9049ce10229a15c60e)
1. Previously we used integer Point type to detect corner, which was wrong.
2. Delete duplicate points more aggressively to prevent too many points
around curved overhangs.
3. Do not generate roof_1st_layers if there is no interface at all.
Change-Id: I1167ac04c533ec8f29dc9e656ba7072d1b54197f
(cherry picked from commit 1329347c4bf9c8207cf21e591a6ad113bb565673)
auto select grid infill for tree hybrid, and set default wall count to
1.
Change-Id: Icbecd540d06f353da2e63533f8f7cf7d7f20fbdb
(cherry picked from commit 246335cc195c88a4101dddd1eeda42d9ca16589f)
1. fix possible empty layers (caused by continues walls)
2. fix normal node may be absorbed in drop_nodes in "tree hybrid"
3. popup message to ask the user to select best parameters for tree strong
and tree hybrid.
4. auto select lightning infill for tree hybrid.
Change-Id: I7d172887a9b0e4f268267684e83fc02dc7ec6a0c
(cherry picked from commit bc6d130e86c252d7fc1f84c4df7da95050dd5d51)
1. change base pattern "None" to "Hollow", and add an icon image
2. fix a bug of not initializing m_highest_overhang_layer
3. fix a bug where normal(auto) with Tree* styles won't generate any
supports.
4. add popup message when selecting support material for interface.
5. draw connected loops when wall count is larger than 1
Change-Id: I7ea211d2971b25c65724bb10d0f6cf6e0b68c6a1
(cherry picked from commit 4c1ae7f937239fc3e1397ec2cb3b290d886bb0f0)
1. smooth nodes' positions
2. draw ellipse along movement direction
3. fix a bug of radius not smooth
4. fix a bug of Tree Strong having too large radius
5. fix a bug in plan_layer_heights: when wipe tower is
enabled, independent_support_layer_height is false, and all support
layers should be exactly the same as the object.
Jira: STUDIO-1785
6. move support style popup message to on_value_change, so only show the
popup when the user changes support type or style.
Change-Id: Ibced7a28f436d96000ee35a7194b68bb5a20a32d
(cherry picked from commit 0d814b07e433533c8de1b7a04bf52b577de0778d)
1. In auto arranging bed temp can be higher than vitrify temp by no more than 15 degrees.
2. In by-object printing we use max radius for clearance
3. Add P1P max radius
Change-Id: If595f3e19fd74f6f36d2f394edbb835c413cc800
(cherry picked from commit 2af42420ad3770f0728adb583082600544519a58)
1. Add a new style "Tree Slim". If enabled, tree
support branches are merged more aggressively, and the support volume
is minimized.
2. Enable support style, add back Snug for normal support.
3. Remove hybrid(auto) type and use "Tree Hybrid" style to represent it.
4. Fix a bug in plan_layer_heights that may generate empty layers when
layer height is set to 0.3mm.
5. Fix a bug where no raft is generated if there is no overhang.
6. Fix the bug where no bottom interface or bottom gap is generated when
tree slim is selected.
7. Use physical distance to calc radius
Change-Id: Iacd57018ae5496cdc9acd28551c44d1c88c53fe0
If don't do this, laoding old 3mf generated by version 1.3 or lower will
have problem, e.g. normal support will be replaced with normal(auto).
Change-Id: Iaa8e1f8badaacc74479d99a6e4153d8850945279
1. undef SUPPORT_TREE_DEBUG_TO_SVG
2. change default tree branch angle to 45 degrees
3. encourage tree neighbors merge faster
4. draw more loops at the top of trees for stronger support
Change-Id: I2edf6a2dddb3b6165c2519ee15e9a7ffaba9de94
(cherry picked from commit 3a9723b2e88a033b3298cd68daf9400265e984a1)
Default infill pattern is lightning now, which has
a crash bug when no overhang is provided.
Change-Id: I1e70b8458d1eef670a78d698c68b21d7f48bc3eb
(cherry picked from commit 777af3aa1dbb9869209945f3a6dbcc07cba0b84a)
1. Use nlopt and clipper offset togather seems not stable, very easy to
crash. We do the offset outside nlopt now.
2. Fix a bug with finalAlign where objects may be translated to overlap
with excluded region.
3. change the words of support_expansion
Change-Id: I22e37b20e4ae16f47bde206de90845616e4cefad
(cherry picked from commit 1c26e5d2862fd3f3292971b5c749420bfb2cdf0e)
Arthur