Introduce ImexRole::Span as a 5th tile cycle state that declares "this
tool is the multicolor partner of Primary on the same gantry." Encoded
as the `S` role suffix in `imex_mode_active_tools` (e.g. `0:P,1:S,2:M,3:M`).
Disambiguates paired-gantry mc-mirror from 4-independent-copies — both
share the same active_tools shape sans the marker.
Span drives:
- Multicolor block rule: now requires Span on primary's gantry to allow
multi-color slicing in a parallel mode. Replaces the prior "≥2 tools
on primary's gantry" check; pre-existing 4-tool multicolor configs
need T1 flipped to Span.
- Ghost aggregation: one ghost per non-primary gantry when Span is
present, using the column-paired representative. Aggregated-mirror
drag tracks primary 1:1 in X (gantries don't share an X rail) with
X-flip baked into mesh-local frame so geometry still reads as mirrored.
- Zone aggregation: one full-X row strip per non-primary gantry instead
of per-tool quadrants.
- UI: 5th button in IMEXModesCtrl. Cycle Off→P→C→M→S→Off, only offered
on multi-gantry printers and only on tiles sharing primary's gantry row.
Single source of pairing truth: group_imex_active_tools_by_gantry in
IMEXHelpers, consumed by ghost factory and zone calculator.
Also fixes the carriage collision strip's X-boundary check, which lacked
the row constraint its Y-boundary counterpart already had — paired-gantry
mc-mirror was drawing a spurious right-edge strip from T3 sitting
diagonally from primary.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Completes the Split-type IMEX mode plumbing started in 0bb1cef. Phase 1
landed the config option, helper, validator, and plater badge updates;
this commit lands the visualization side and the editor surface so users
can actually create and use Split modes.
Zone aggregation (PartPlate::calc_imex_zones)
- When mode_type == "split" and there's row separation between primary
and secondaries, collapse copy_cells and mirror_cells per-gantry
(each cell gets primary's column) and force has_col_sep = false.
make_boxes then takes its full-X-row branch and renders one zone
covering each non-primary gantry's full Y band, instead of per-tool
quadrants.
Ghost aggregation (PartPlate::calc_imex_ghosts)
- Pre-scan the active mode's tool list to pick a canonical head per
non-primary gantry (the tool whose physical column matches primary's;
fallback to first-seen). For Split modes, the per-head emission loop
skips non-canonical tools so each non-primary gantry gets exactly one
aggregate ghost rendered at the canonical's mirrored position.
- update_imex_ghost_transforms unaffected — it iterates the already-
filtered ghost set.
Modes editor Type column (IMEXModesCtrl in Tab.cpp)
- Each non-primary mode row gains a wxChoice dropdown selecting Copy /
Mirror / Split. Primary row gets a static "Primary" label.
- Header row picks up a "Type" column header with sized spacer that
aligns with the dropdown.
- get_mode_data() now returns a fourth tuple element (types vector).
load_from_config() reads imex_mode_types via imex_mode_type_for so
legacy presets without the new option still infer types from mode
names. on_change writes imex_mode_types back to config.
- matches_config(), snapshot_row(), row_differs_from_parent(), and
reset_row_to_parent() all extended to track type alongside name/
tools/gcode — per-row reset arrows reflect type-only changes, and
reset restores the parent's type via imex_mode_type_for fallback.
- Type-choice dropdown fires notify() on change so the dirty/save flow
catches it like any other row edit.
End-to-end: switching a row to Split type in the modes editor, then
selecting that mode on a plate, allows multicolor slicing (the gantry-
pair check is bypassed in imex_multicolor_block_reason) and the bed
visualization shows a single aggregate zone + one ghost per non-primary
gantry instead of per-tool clutter.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Felix14-v2 PR review feedback (https://github.com/OrcaSlicer/OrcaSlicer/pull/13086#issuecomment-4323696312)
plus the slice-time validation work that follows from his bug list.
UI polish:
- Capitalize "Primary" in display (right-click mode menu, plate tooltip).
Sentinel stays lowercase for wire compatibility.
- Pre-slice-warnings checkbox now uses Orca's ::CheckBox so it matches the
green toggle style of the rest of the IDEX/IQEX configuration page.
- DPI-scaled the IMEXModesCtrl (modes editor) sub-panels, button grid,
text wraps, gcode textarea, and the ghost-tooltip swatch (imgui.scaled).
Legend swatches sized to body-text height for visual balance.
- Primary mode tool buttons in the modes editor are now disabled (read-
only): cycling roles on the IMEX-off mode is a no-op and confusing.
- Modes editor sub-panels now explicitly inherit the app's window-default
dark colour so chromeless ScalableButtons don't render with a visible
light box around their icons on GTK dark themes.
- Per-mode-line reset arrows in the modes editor: each row gets a small
reset bitmap that snaps that row's name+tools+gcode triplet back to the
saved preset's value. matches_config() guard on the page-level reload
prevents the textbox-being-typed-into from being destroyed mid-keystroke.
- New View menu item "Show IDEX/IQEX Toolhead" — toggles the per-carriage
footprint boxes during G-code preview playback. Gated to Preview tab +
IMEX printer; backed by app_config so it persists.
Coordinated config migrations:
- imex_tool_layout and imex_viz_theme migrate from coString to coEnum
(ImexToolLayout / ImexVizTheme). Existing wire format preserved so
saved presets and 3MFs deserialize unchanged. Side-benefit: both now
pick up standard Field rendering and so finally show reset arrows.
Slice-time safeguards (the validation half):
- imex_suppresses_bare_toolchange(parallel_mode, count): suppresses the
slicer's bare T<n> at print-start in any IMEX parallel mode (the user's
imex_mode_gcode + machine_start_gcode owns tool activation there). Mid-
print T<n> emits normally — Print::validate blocks the configurations
where mid-print T<n> wouldn't make sense. Applied to both code paths
inside GCode::set_extruder (the long multi-extruder path AND the
single-extruder path that fires when multiple_extruders=false).
- imex_multicolor_block_reason(): hard-stop validator returning a user-
facing reason string when the active IMEX configuration can't physically
support multi-color. Catches IDEX (1 tool/gantry), 2-tool-active IQEX
(no within-gantry swap topology), and any MMU/AFC lane sharing among
used filaments. Wired into Print::validate as a slice blocker, and into
PartPlate::has_imex_multimaterial_conflict so the plater badge agrees
with the slice block (no more false positives where the badge warns but
the slice goes through).
- New imex_mode_types config option (parallel array to imex_mode_names)
and imex_mode_type_for() helper. Mode-type tag drives behaviour: zones,
ghosts, and validation interpret modes differently per type. Initial
types: "primary", "copy", "mirror", "split". Split modes are explicitly
designed for paired-gantry IQEX multi-color and bypass the gantry-pair
check in imex_multicolor_block_reason (MMU sharing still blocks them).
Test coverage:
- New unit tests cover imex_suppresses_bare_toolchange (4 cases),
imex_multicolor_block_reason (8 cases including IDEX, IQEX 2-/4-tool-
active, MMU sharing, missing primary, Split type), and imex_mode_type_for
(3 cases including legacy fallback). Total: 186 IMEX assertions across
71 test cases, all passing.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Across 6 files the literal "primary" string was the sentinel for "no IMEX
parallel mode active" — used for short-circuiting in serialization, ghost
visualization, zone calc, popup-menu list construction, the IMEXModesCtrl
non-deletable first row, and several layer-of-export checks. A typo in
any one would silently bypass the guard.
Define kImexPrimaryMode in IMEXHelpers.hpp with a docstring describing
what equality with it means semantically, and route every call site
through it. No behavior change.
Touched: bbs_3mf.cpp, GCode.cpp, PartPlate.cpp, Plater.cpp, Tab.cpp.
The bbs_3mf and Tab files now include IMEXHelpers.hpp; the other three
already did.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Add extrusion role change G-code options
Introduces new G-code options for handling extrusion role changes at the process and filament levels. Updates configuration, GUI, and GCode logic to support 'process_change_extrusion_role_gcode' and 'filament_change_extrusion_role_gcode', allowing custom G-code insertion when the extrusion role changes.
Co-Authored-By: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* Optimize extrusion role-change gcode handling
Cache gcode template strings and current filament id, and guard creation of DynamicConfig/placeholder processing behind a check that at least one role-change gcode is non-empty. This avoids redundant config lookups and DynamicConfig/placeholder parsing when no custom role-change gcode is defined, improving clarity and performance without changing behavior.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
# Description
This commit adds the enhancement of https://github.com/OrcaSlicer/OrcaSlicer/issues/13116
- Adds checkboxes to enable or disable the fan speed override during print or after printing is completed. This allows users to, for example, only override the fan speed during printing whilst leaving the fan speed as is set in the machine gcode at the end.
- Two new flags are added for this: `activate_air_filtration_during_print[extruder]` and `activate_air_filtration_on_completion[extruder]`. These can be used to more finely control machine gcode
- Current filament settings remain as they are: `activate_air_filtration[extruder]` settings are unaffected and by default both new flags are set to true, ensuring the same set behavior as before.
# Screenshots/Recordings/Graphs
<img width="856" height="208" alt="Screenshot From 2026-04-09 18-57-14" src="https://github.com/user-attachments/assets/e71e7de3-2def-4046-b5dc-55bf3b516ce5" />
As you can see there are now checkboxes left of the fan speeds. They have their own tooltip too, which also helps identify the correct flags for users who want to adjust their machine gcode.
## Tests
I have thoroughly tested this on my own computer (CachyOS) and on my printer. I have also carefully checked the gcode in every possible state this is in and ensured that the unsaved changes dialog properly displays the labels for these settings. Flags are set properly, sliced files properly use the flags if you check for them in machine gcode and default behavior is unaffected for those who have already changed settings for air filtration. From what I can see, this does exactly what it should be doing without any issues.
* make initial layer travel move acceleration and jerk configurable
* Update spelling to match UI pattern
* Update min integer and re-order to match patterns
---------
Co-authored-by: Thomas Scheiblauer <tom@sharkbay.at>
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Replaces the plater-icon popover with colored transparent ghost copies
of primary-head instances on the plate, one per secondary active head
under its Copy/Mirror role transform. Left-click on a ghost opens a
compact filament picker popover for the ghost's head (MMU lane override).
Ghosts track the primary through drag/rotate/scale/mirror and invalidate
on mode or pem changes.
Key pieces:
IMEXHelpers -- imex_head_transform (Primary/Copy/Mirror), shared role
parser, per-head filament resolution with X-axis Mirror anchor.
PartPlate -- ghost state, volume rebuild on mode/map/object mutation,
primary_origin plumbed for Mirror reflection across the primary-row
gantry plane.
GLCanvas3D -- ghost rendering with per-head filament color and
translucent blending; picking routed via volume composite id.
Plater -- ghost click + tooltip; plater icon left-click always cycles.
IMEXFilamentPickerPopover -- BitmapComboBox row for one secondary head,
writes imex_head_filament_map on selection.
bbs_3mf -- round-trip the per-plate imex_head_filament_map option.
PrintConfig -- add imex_head_filament_map as a plate option.
MMU/AFC routing for parallel modes relies on the printer profile's
physical_extruder_map (see prior commit for authoring format). Primary-
row heads and their per-plate filament overrides are resolved through
that map, so PA and temperature emission address the correct physical
extruder when multiple logical slots share one carriage.
Tests: IMEXHelpers coverage for Primary/Copy/Mirror transforms
including a 2x2 off-row regression guard for the X-axis reflection fix.
The "Pre-slice warnings" line in the IDEX/IQEX Configuration section
was a widget-only line (no options) with full_width left at the default
of 0. activate_line() only skips the option_set.front() call when
full_width=1; without it, the code falls through to:
bool is_legend_line = option_set.front().opt.gui_type == ...
Calling front() on an empty std::vector is undefined behavior. On
Windows/MSVC release builds this dereferences a null pointer and reads
at offset 0x30 (where ConfigOptionDef::gui_type lands), producing an
ACCESS_VIOLATION at 0x30. On Linux/GCC the same UB happens to be
harmless, so the crash is Windows-only and cannot be reproduced on
Linux.
Fix: set line.full_width = 1, matching the pattern used by the "Modes"
(IMEXModesCtrl) line. This takes the early-return widget path in both
append_line and activate_line, bypassing option_set.front() entirely.
Reported by tester: crash on clicking Multimaterial tab with any
printer (K3D VOSTOK confirmed), build af59501f.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaces MessageDialog with RichMessageDialog to show a suppress
checkbox on both slice-plate and slice-all warning paths. Persists
the choice to app_config as imex_pre_slice_warnings=false. Adds a
re-enable toggle in Printer Settings → Multimaterial → IDEX/IQEX
Configuration so the warnings can be restored if suppressed accidentally.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add warning badge (obj_warning.svg overlay) to the iMEX plate icon when
a parallel mode is active alongside multi-material objects on the same plate
- Add has_imex_multimaterial_conflict() using get_extruders(true) so only
filaments actually used on the plate are checked
- Move multi-material caution dialog from reslice() into on_action_slice_plate /
on_action_slice_all so it fires exactly once per user action and does not
disrupt GL thumbnail generation during Slice All
- Fix is_imex missing from p->config init key list so on_config_change()
diff detection correctly triggers refresh_imex_icons()
- Defer imex_changed handling until after set_bed_shape() so m_shape is current
- Replace plain remove button with ScalableButton (imex_remove.svg) in mode rows
- Add EditGCodeDialog launch button per mode row for placeholder browsing
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
IMEXModesCtrl:
- Primary mode is now a non-deletable first row stored as sentinel
"primary" in imex_mode_names; older configs load cleanly
- New rows default T0 → Primary when no tool assignment is stored
- Filter "primary" from plater popup/cycle list to prevent double entry
- imex_tools_per_gantry cap raised 2 → 4
Zone sizing:
- Zone width/height now based on active tool count only; inactive tools
donate their bed share to active neighbors (fixes 4-tool layout)
- Active col/row maps (col_to_zone/row_to_zone) applied consistently
across zone fills, collision strips, and primary zone box
GCodeViewer animation:
- Mirror position formula fixed: left-of-copy reflects across copy
zone's left edge; right-of-copy reflects across right edge
(T3 was rendering on top of T1)
- strip_width/row_strip_height use active counts, matching PartPlate
Stability:
- Early return in calc_imex_zones() when tool_states is empty; prevents
OOB crash on new printer with stale process-preset mode name
- is_imex toggle in on_config_change calls refresh_imex_icons() so the
plate mode icon appears without requiring a new project
GCode:
- Remove "primary" guard so Primary mode gcode field is emitted at
start of print
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add all_tool_states map to IXexModesCtrl Row, storing all tool
assignments including those not currently visible due to grid size
- active_tools_string() now serializes from all_tool_states so
off-screen assignments survive the round trip through a smaller grid
- Button clicks keep all_tool_states in sync with visible btn_states
- Display anchors to the gantry row containing the Primary assignment
so reducing gantry count keeps the meaningful row visible rather
than always defaulting to row 0
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add per-plate iXex mode icon to the plate toolbar (normal, hover, dark, dark-hover SVG variants)
- Left-click cycles through available modes; right-click shows a popup menu with all modes as radio items
- Mode changes are recorded in the undo/redo snapshot system
- Fix double context menu: suppress EVT_GLCANVAS_PLATE_RIGHT_CLICK and EVT_GLCANVAS_RIGHT_CLICK when the iXex icon popup was already shown
- Remove ixex_parallel_mode combo from Print Settings > Other > Special mode (superseded by per-plate icon)
- Remove dead code: refresh_ixex_mode_combo(), m_ixex_mode_combo member, related Tab reload hook
- iXex mode persisted in 3MF project files via existing plate metadata serialization
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* Union ex brims
Revert "Union ex brims"
This reverts commit bbc9a39faf318dc2df093eb2bdcebf19a4162fe9.
Update Brim.cpp
* dont repeat paths
* Update Brim.cpp
* multimaterial brim independiente
* Normal brim if is by object
* fix print order
* cleaning 1
* cleaning 2
* Normal brim if multimaterial on first layer
* fix artifact
* combine_brim optional
refactoring
* refactoring gcode.cpp
* refactoring brim.cpp
Update Brim.cpp
* Remove multimaterial first-layer check for brims
Stop detecting extruders used on the first layer and remove the is_multimaterial_first_layer guard. Simplify can_combine_brims to only consider combine_brims and whether printing is ByObject, allowing brims to be combined across extruders unless printing by object or combine_brims is disabled. Cleans up unused code and simplifies brim-generation conditions.
* Remove material specification from unified brim comment
* Update PrintConfig.cpp
Config key rename (breaking for saved profiles — call out in PR):
ixex_carriage_width_x/y → ixex_nozzle_clearance_x/y
Labels updated to "Nozzle Clearance X/Y" with consistent tooltips
describing the measurement as nozzle-to-collision-side-edge distance.
Strip math fix:
Previously halved the clearance value (× 0.5) under the assumption
the nozzle was centered in the carriage. The measurement is now the
literal nozzle-to-edge distance, so the × 0.5 factor is removed.
The collision strip width now equals the configured value directly.
Carriage box visualization (GCodeViewer):
- Add per-carriage box_offset_x/y so the nozzle marker sits at the
physically correct edge of the footprint box rather than centered.
- X: zone-based by default (nozzle at inner edge facing bed center).
Copy secondaries inherit the primary's X orientation (same movement
direction). Mirror secondaries use the collision-side edge.
- Y: always row-based regardless of copy/mirror mode. Gantry is always
behind the nozzle (high-Y); front-row primaries with a back-row
secondary override to place nozzle at the low-Y edge.
- Fix stale mesh bug: GLModel::init_from() is a no-op when already
initialized. Call reset() before init_from() so mesh rebuilds
correctly when nozzle clearance values change in config.
- Remove m_ixex_toolhead_box_dims (was the now-unnecessary cache key).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Same class of bug as the TabPrinter fix: clear_pages() destroys all
page widgets but didn't null m_ixex_mode_combo, causing a SIGSEGV in
refresh_ixex_mode_combo() when load_current_preset() ran after a
page rebuild (e.g. triggered by Plater::reset()).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Arrays cannot be captured by value in C++ lambdas; replaced with a
static local declared inside the event handler.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Introduces first-class parallel printing (copy/mirror modes) for printers
with multiple independent X-axis carriages. Branded iXex (independent X
extruder), targeting Klipper firmware with a firmware-agnostic design.
- PrintConfig: new printer options declaring iXex capability and geometry
(is_ixex, ixex_gantry_count, ixex_tools_per_gantry, carriage dims,
tool layout, and per-mode name/role/gcode arrays)
- Preset: iXex keys registered in printer and process preset option lists
- Tab: IXexModesCtrl visual grid editor in Printer preset tab; mode
dropdown in Process → Others tab; clear_pages() nulls iXex pointers to
prevent dangling-pointer crash on preset save
- PartPlate: 2D zone visualization (active/dimmed/dividers) and
placement-violation detection (has_ixex_placement_violations) that
blocks slicing when objects fall outside the primary zone
- Plater: violation detection wired into update_background_process so
the Slice button is disabled with an error notification on violation
- GCode: mode-activation G-code injected before machine_start_gcode
- GCodeViewer: multi-carriage toolhead markers in sequential preview,
filament legend annotated with active carriage count and mode name
Previously, wipe tower behavior was determined by checking if the printer
was a QIDI vendor. This introduces a configurable enum (Type 1 / Type 2)
so any printer can select its wipe tower implementation. BBL printers
remain hardcoded to Type 1. Qidi profiles default to Type 1.
1. Dirty flags not showing for extruder options:
2. Crash when switching to non-first extruder tabs:
3. Modifying one extruder's parameter affects other extruders:
## Summary
- Change default bed temperature type from "By First filament" to "By Highest Temp"
- Move `bed_temperature_formula` option from develop mode to advanced mode for better accessibility
- Relocate UI control from "Basic Information - Advanced" to "Multimaterial Setup" section where it's more relevant for multi-filament printing
Using the highest temperature of all printed filaments is generally safer for bed adhesion than using the first filament's temperature, especially in multi-material prints where different filaments may require different bed temperatures.
<img width="390" height="239" alt="Screenshot 2026-02-26 at 18 44 56" src="https://github.com/user-attachments/assets/0fe9f8c7-062a-4a7a-8ab3-c52df7e74b26" />
Wipe tower interface features and preheat fixes
Fresh PR branch rebuilt on upstream/main (squash of origin/BBL-studio-wipe-tower-merge) to avoid merge-history issues.
* Fix extruder_id out-of-bounds in switch_excluder
Added a check to reset extruder_id to 0 if it exceeds the size of nozzle_volumes or extruders, preventing potential out-of-bounds access.
Co-Authored-By: Christopher R. Palmer <1305033+crpalmer@users.noreply.github.com>
* Add custom nozzle diameter option in sidebar
Ensures that if the actual nozzle diameter is not present in the list, it is added as a custom option. This improves user experience by allowing selection of non-standard nozzle diameters.
Refactor nozzle diameter selection logic in Sidebar
Simplified the logic for updating the extruder nozzle diameter combo box by removing redundant checks and streamlining the addition of custom nozzle diameters. This improves code clarity and ensures the actual nozzle diameter from the printer config is always considered.
Co-Authored-By: yw4z <yw4z@outlook.com>
* Prevent profile switch if selected diameter matches nozzle
Adds a check in Sidebar::priv::switch_diameter to avoid switching printer profiles when the selected diameter matches the current nozzle diameter in the configuration. This prevents unnecessary profile changes and improves user experience.
---------
Co-authored-by: Christopher R. Palmer <1305033+crpalmer@users.noreply.github.com>
Co-authored-by: yw4z <yw4z@outlook.com>
* fixes: keys_map is initialized with itself [-Winit-self]
* fixes: operation on repeats may be undefined [-Wsequence-point]
* fixes: warning: suggest parentheses around && within || [-Wparentheses]
* fixes: moving brim_points to itself [-Wself-move]
* fixes: operation on unprintability may be undefined [-Wsequence-point]
* fixes: extra tokens at end of #endif directive [-Wendif-labels]
* fixes: converting to non-pointer type int from NULL [-Wconversion-null]
* review result: simplifies fix 'operation on repeats may be undefined'
## Problem
Some Creality printers (e.g. Ender-3 V3 SE) rely on metadata comments in the first lines of G-code files to display print info on the screen (estimated time, filament usage, layer height). This follows a format originally used by Cura/Creality Print:
```
;FLAVOR:Marlin
;TIME:3708.97
;Filament used:6.21m
;Layer height:0.2
```
OrcaSlicer currently has no way to write content before the `HEADER_BLOCK` in the G-code output, and does not expose `print_time_sec` or `filament_length_m` as usable placeholders. As a result, these printers show zeroed-out print info on screen.
## Changes
### 1. New placeholders (post-processing)
Added two new G-code placeholders resolved during post-processing:
- `{print_time_sec}` — total estimated print time in seconds (double)
- `{filament_length_m}` — total filament length in meters (double)
These values are only available after G-code generation, so they use inline marker replacement (`@PRINT_TIME_SEC@`, `@FILAMENT_LENGTH_M@`) that `GCodeProcessor::run_post_process()` substitutes with actual computed values — the same pattern used by existing M73 and layer count placeholders.
### 2. New "File header G-code" option (`machine_top_gcode`)
Added a new G-code field in **Printer Settings > Machine G-code** that writes content at the very top of the output file, before `HEADER_BLOCK_START`. This allows users to add firmware-specific metadata that must appear in the first lines.
### 3. Creality Ender-3 V3 SE profile update
Pre-configured the Ender-3 V3 SE profiles (all 4 nozzle variants) with a default `machine_top_gcode` value matching the Cura-compatible header format, so print info displays correctly out of the box.
# Screenshots
| Before (current OrcaSlicer) | After (this PR) |
|---|---|
|  |  |
## Tests
- Sliced test model with Ender-3 V3 SE profile
- Verified G-code output contains correct values in first lines:
- `;TIME:` with actual print time in seconds
- `;Filament used:` with filament length in meters
- `;Layer height:` with correct layer height
- Verified `{print_time_sec}` and `{filament_length_m}` work in both Machine Start G-code and File header G-code fields
- Verified empty `machine_top_gcode` produces no extra output
- Built and tested on macOS (arm64)
* added option to save a profile as detached(no inheritance)
* Revert "added option to save a profile as detached(no inheritance)"
This reverts commit c1326c6dec.
* re-commiting the changes
* fixed conflicts with upstream
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
