xun.zhang
5d768f27dc
ENH: update profiles for TPU 85A
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I27b5a6a555ca2c9f2666eb116343dc2be189bbc9
(cherry picked from commit 0c12fda23df6cdadcc67285b97cb9ff19d0f264b)
2025-09-18 16:15:19 +08:00
xun.zhang
542ddebbc5
ENH: add bambu tpu 85a and 90a for a series
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I1975bd3421b4076d113a8f9000616a74efadbc03
(cherry picked from commit fb74c3362511ce363b7137e18345482a064c6831)
2025-09-18 16:13:17 +08:00
小炒肉
5105f1d28b
ENH: Revert "ENH: remove bambu tpu 85a temperoraily"
...
This reverts commit 74f0c8a63c220d688b503bff87f927c94749eef9.
Reason for revert: <add back now>
jira: none
Change-Id: I07c42c264b820fdd5beff1556f6615b22e278b28
(cherry picked from commit cbaf4d9a12d3aaa3507038d93ee5ecee848f8088)
2025-09-18 15:39:28 +08:00
xun.zhang
b3181c6c52
ENH: add profiles for Bambu PLA Lite
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I2072a34ee5614f702eced636e163e8d06eb07279
(cherry picked from commit 2581925e4b15888c42afa479a323f189e353d56a)
2025-09-17 23:30:27 +08:00
xun.zhang
c6b34b22dd
ENH: remove bambu tpu 85a temperoraily
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ie45b497ad5a838a45e819467944775ffaaf955fa
(cherry picked from commit 853f899500f1fa103dfd3078bf42e656af7d1a57)
2025-09-17 11:13:11 +08:00
xun.zhang
022a67836d
ENH: add profiles for TPU 85A and 90A
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ica88ced8d2e0dbb1bdff0d4b80863bd98102ff16
(cherry picked from commit 8d10dcd046ebcb4d78962d7796ebec0d58776bc0)
2025-09-17 11:02:20 +08:00
xun.zhang
ad740bde86
ENH: add more process profile for H2D
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ia0b3534e6e00d7f231cf759b0045473a3fb66526
(cherry picked from commit e2f25326c1c3cac8241773c94f4cc5b128d68cdb)
2025-09-16 21:21:39 +08:00
Noisyfox
2375ab860a
Merge remote-tracking branch 'upstream/main' into dev/h2d
...
# Conflicts:
# resources/profiles/BBL.json
# src/slic3r/GUI/AmsMappingPopup.cpp
# src/slic3r/GUI/MediaFilePanel.cpp
# src/slic3r/GUI/Plater.cpp
# src/slic3r/GUI/StatusPanel.cpp
2025-09-16 14:46:40 +08:00
SoftFever
e3d55b3c5b
update profiles
2025-09-10 23:21:45 +08:00
xun.zhang
1126d3f7dc
ENH: update custom gcode for H2D
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I6c69c6ee3cd77c7b82d6b37592e9fc4ebfd539d9
(cherry picked from commit 785e0299719215f4a4f2b074ec7809e01f77f322)
2025-09-10 16:19:55 +08:00
xun.zhang
733353fbc9
ENH: update nozzle volume for H2D
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I21e56af3d4d2d3eb2ec4265ce3f34bac649b18f0
(cherry picked from commit 3213963399140b6d4035d8547af5215f123df686)
2025-09-10 15:30:00 +08:00
xun.zhang
f29133cf58
ENH: update custom gcode for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I5747a7cf019fee24a79c26743fcd227948846b51
(cherry picked from commit 496786297834d72c530df595c79eaec1e1a95c20)
2025-09-10 15:00:31 +08:00
xun.zhang
555e9e3ded
ENH: update process profile for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ia157b81ad03083a34b7456998625682b6b69e6fc
(cherry picked from commit 2c1bcde53de8e125991307e653c49faa1c7430c7)
2025-09-10 09:08:34 +08:00
xun.zhang
d674f49855
ENH: modify nozzle diameter sequence
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ia17f86e3f035ad9389d0f44f8378c822f8cc947e
(cherry picked from commit d3927a59e99ab5fc484934703d4eb08b0e728179)
2025-09-09 17:16:54 +08:00
xun.zhang
ed6f2eb39c
ENH: update some params for filamnet in H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I1171dbf41f840bb0a59045c70a811a5da2bbd694
(cherry picked from commit 6b13655f9dbd87d1f1bf0f0d62346b2043e3890d)
2025-09-09 15:41:33 +08:00
xun.zhang
a7578be62f
ENH: update gcode for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I8b33061aba2ba142bc435c56148e3a5ac500e413
(cherry picked from commit 17706151445e94005ccad956c473daee0b576aa7)
2025-09-09 14:41:24 +08:00
zhimin.zeng
6ab141e0e1
ENH: add PPS-CF/PPA-CF detection for multi-extruder printer
...
jira: STUDIO-9660
Change-Id: I1df024e178b8561569b493888d6057d8f96aea3c
(cherry picked from commit b68a7b3bd6ad5c980885fbaed3c635ae1a424f73)
2025-09-09 14:41:23 +08:00
zhimin.zeng
1b442e2c47
FIX: add printer picture for H2D
...
jira: STUDIO-9592
Change-Id: I1e6b0cc04f3dba8578b5c59eeb1d24ba522f0c72
(cherry picked from commit dec14c4bac748c894c91d796eeaf1ee698973b12)
2025-09-09 11:02:36 +08:00
Overture3D Filament
c219600a17
Add Official overture preset ( #10631 )
...
* add overture preset
* Fix PLA pro profile missing issus
* fixed profile lib indexing order issus
* Merge branch 'main' into main
* Merge branch 'main' into main
2025-09-09 10:57:58 +08:00
xun.zhang
4a0d0a412e
ENH: update fan related settings for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I9ea172f676b22d5a83c2dd57caa1549192b1c3a5
(cherry picked from commit 4f5b6275f552c970e16cb570ddf61903b5738bfe)
2025-09-07 22:46:20 +08:00
zhimin.zeng
e013019b11
FIX: add timelapse_gcode for H2D
...
jira: none
Change-Id: Iab0248c22963ca7d0dc75fc03d2ccda147059226
(cherry picked from commit c141ed25f5888f0bdd059d5fccb1c69890996fc0)
2025-09-07 21:37:50 +08:00
xun.zhang
20603526b8
ENH: optimize custom gcode for H2D
...
1.Add AMS empty print detection switch
2.Enable heated bed tilt compensation
3.Increase material length for easier bundling
4.Add Z-axis vibration compensation
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I9e51d3812eab51447c47f947447b5e1f281ab9a7
(cherry picked from commit ce7a244c3dd73f3c7e2d809ea357a4ebef14653e)
2025-09-06 23:54:12 +08:00
Noisyfox
fa7e866730
Fix BBL filament profile loading issue
2025-09-05 19:10:21 +08:00
Noisyfox
3e27715843
Regroup 3rd party filaments for BBL printers
2025-09-05 17:42:43 +08:00
Noisyfox
4120c64c5e
ENH: add profiles for H2D
2025-09-05 17:37:14 +08:00
Noisyfox
9fc3b38da8
Prepare for profile cherry-picking
2025-09-03 22:10:12 +08:00
Pepe-Polymaker
821e5ac597
Add more Polymaker filaments to Global Library and BBL ( #10152 )
2025-07-17 23:16:45 +08:00
Noisyfox
9988d0a1f8
Merge branch 'main' into dev/bbl-network-upd
2025-06-25 08:49:55 +08:00
SoftFever
88fb8187d9
Allow specifying rotation patterns for Sparse and Solid infill ( #9924 )
...
* SPE-2405: Add Zig Zag infill that is rectilinear infill but with a consistent pattern between layers.
This Zig Zag infill is inspired by the Zig Zag infill in Cura.
Change-Id: I798affa99f4b5c3bd67f47643e67530fb7c3e0cb
(cherry picked from commit 2808d04d5deef6f99f9618648e46f11de03efc98)
* Add Cross zag and locked-zag for shoes
Ported from BambuStudio
* wip
* sparse infill roratation template
* solid_infill_rotate_template
* remove rotate_solid_infill_direction
* hide sparse infill rotation template for non applicable infill pattern
* hide solid_infill_rotate_template for non supported solid infill patterns
* update icon
* support empty string for ConfigOptionFloats deserialize
* fix build errors
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com >
2025-06-22 23:10:35 +08:00
Noisyfox
2dacde5b3b
Rename fdm_process_bbl_ to fdm_process_single_
2025-05-27 10:32:03 +08:00
FusRock
423172484e
Add FusRock ABS-GF to BBL ( #9412 )
...
* add abs-gf
add abs-gf
* fix fusrock abs-gf
fix fusrock abs-gf
* fix
* Update FusRock ABS-GF @base.json
fix false
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com >
2025-04-20 16:06:59 +08:00
SoftFever
f6dc9c1ab4
bump bbl.json version
2025-03-31 14:36:37 +08:00
SoftFever
0965b92895
update profile version
2025-03-01 17:49:00 +08:00
Schildkroet
b01c1a4553
Improve folder structure for eSUN Filament in BBL. Added LW-PLA. ( #8539 )
...
* Moved profiles to subfolder
* Updated PLA-LW profile
* Added PETG
---------
Co-authored-by: SoftFever <softfeverever@gmail.com >
2025-02-26 20:00:14 +08:00
SoftFever
911baa84b2
Fix AMS mapping bug ( #8531 )
...
* Fixed an issue that filament ids are conflicted for BBL machines
* bump bbl.json version
2025-02-23 18:43:03 +08:00
SoftFever
4c28dd5ba0
Add some AliZ filament profiles as example ( #8496 )
2025-02-22 15:09:33 +08:00
Asim Siddiqui
b2494220f6
Updated/fixed SUNLU filament parameters for BBL ( #8395 )
...
Updated/fixed SUNLU filament parameters for BBL & standardized indentation
2025-02-16 00:16:02 +08:00
blackhead1981
ea99eeb51f
Update to profile version 01.10.00.33 and add new Bambu filaments ( #8091 )
...
The following Bambu filaments have been added:
- Bambu PLA Wood
- Bambu PLA Silk+
- Bambu PC FR
- Bambu PETG Translucent
Additional variants for the above filaments have also been added, including versions for different nozzles and printers.
The filament vendor for Fiberon PA612-CF has been corrected from "Bambu Lab" to "Polymaker."
2025-01-31 16:44:56 +08:00
Asim Siddiqui
77b8272c6a
Added SUNLU filaments for Bambu Lab printers ( #7890 )
...
Added SUNLU PLA Matte, PLA+, PLA+ 2.0, Silk PLA+, Wood PLA, Marble PLA and PETG filaments for Bambu Lab printers
Co-authored-by: SoftFever <softfeverever@gmail.com >
2025-01-07 23:28:41 +08:00
Ferdinand Linnenberg
b122c173fe
fix: order
2024-12-12 15:55:35 +01:00
Ferdinand Linnenberg
46d93bbace
fix: re-add generic
2024-12-12 15:50:47 +01:00
Ferdinand Linnenberg
3e26852aec
fix: updated BBL.json
2024-12-07 11:55:16 +01:00
SoftFever
394cf6c981
update bbl profile
2024-09-08 22:05:08 +08:00
Duan Gauche
fa7a11fa7f
Styrene Butadiene Styrene (SBS) - Template and profiles for Bambu ( #6278 )
...
* Added SBS to filament_info.json
* Added SBS to Print.cpp
* added SBS to PrintConfig.cpp
* Added SBS to BBL
* Added SBS Template and also specified SBS as type in fdm_filament_sbs.json
* Updated settings for SBS in filament_sbs_template.json
* Applied SBS settings to fdm_filament_sbs.json
* added settings to Generic SBS @base.json
---------
Co-authored-by: Duan Gauche <duan.gauche@pdsvision.com >
Co-authored-by: SoftFever <softfeverever@gmail.com >
2024-08-11 23:03:02 +08:00
legonigel
a09aa1711a
Update bambulab profiles to 01.09.00.18
...
Copied files from BambuStudio after downloading updated profiles.
2024-07-27 14:05:58 -07:00
SoftFever
b7a0b30578
Pick updates from BS 1.9.3
...
sync bbl profiles
FIX: [#4320 ] crash when edit project preset
github: #4320
Change-Id: I81eb5f0d461565d63a32100a5bebb4569cfb0b1b
ENH: add pctg type
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com >
Change-Id: Ie01fcd4bef0d3ebec5bbd7185a87a1740068bdba
(cherry picked from commit c6276932dd92bc4283600954415eedeac6d351ce)
ENH: CLI: add logic to save metadata into 3mf from CLI
JIRA: no jira
Change-Id: I7f96c2ab9671ec1c0115e90f6d64230b8170eb38
(cherry picked from commit 3d2d6e23ba318a2b331a62e320f8ca199168f1f5)
2024-06-21 18:21:21 +08:00
SoftFever
9ae9585e94
upgrade bbl plugin and profiles
2024-06-16 02:15:46 +08:00
SoftFever
f13dc1fdcd
bump profiles version to 2.1, change most profiles' top_surface_pattern to monotonicline as default pattern
2024-05-22 22:54:56 +08:00
SoftFever
ad341ec9e6
Feature/merge bs1.91 ( #5394 )
...
* fixed logic error in PLA jamming gcode for P1S
* Fix use after free bug in LinesBucketQueue::emplace_back_bucket
I found a use after free bug in LinesBucketQueue::emplace_back_bucket. This was found by enabling address sanitizer.
The LinesBucketQueue class has two related members:
std::vector<LinesBucket> line_buckets;
std::priority_queue<LinesBucket *, std::vector<LinesBucket *>, LinesBucketPtrComp> line_bucket_ptr_queue;
line_bucket_ptr_queue holds pointers into line_buckets. However, since items are inserted into line_buckets one at a time, existing pointers that were stored inside line_bucket_ptr_queue become invalid. Specifically:
void LinesBucketQueue::emplace_back_bucket(ExtrusionLayers &&els, const void *objPtr, Point offset)
{
auto oldSize = line_buckets.capacity();
line_buckets.emplace_back(std::move(els), objPtr, offset); <--- Causes a reallocation, making previous pointers invalid
line_bucket_ptr_queue.push(&line_buckets.back()); <-- priority queue compares against old, now invalid pointers
...
The proposed fix is to calculate the required number of entries in ConflictChecker::find_inter_of_lines_in_diff_objs, and then calling line_buckets.reserve(count). This ensures that sufficient buffer is allocated up front and the pointers are stable as items are added.
* Updated to fix the handling of the capacity change, and removed the code I previously added to reserve upfront since it is not really needed
* Remove accidentally added whitespace
* Removed unused method
* ENH:add mz_zip_reader_extract_to_file_w api
to solove plugin install failed problem by special wide char
jira: none
Change-Id: Ic7d3efe3fdf852387650abf9df65803da9e46a60
(cherry picked from commit b68ad03717a63675fef2f3ef73d4058bf311adea)
* FIX: PrinterFileSystem report real connect error
Change-Id: I99d6ff7f6dcb1f53ccf59854f5f19d0bd39fa9fc
Jira: none
* rename preference name
* FIX:Relax restrictions on importing obj files
jira: none
Change-Id: I61a0156a8424a5f59922956918d37d38e2c3306a
* FIX: [6469] popup dialog too mach when reload object
Jira: 6469
Change-Id: I4097e3a3b018c7a676fea93bf63f8f778bb3148b
* FIX:fixed incorrect display of printer options page on Linux
jira:[STUDIO-6220]
Change-Id: Id1f084658b0b340b7f17ab97ba82c0fd3ae83fae
* FIX: handle exception of dividing by zero in arranging
jira: none
Change-Id: I0d20464dbe81a80293539100f06d72dee456a27b
(cherry picked from commit 94746ae9bf7f467243849570450567b4fdc78e3a)
* ENH:delete no use code
jira: none
Change-Id: I40e7ffa7ea47bb3cd4039eef9f6c28c604eb3abc
* FIX: PrinterFileSystem::FileRemoved
Change-Id: I891aaa8d58ff379dc1ebd8581064865a33388f74
* FIX: resend ttcode to printer on -90 error
Change-Id: I96dc45102a2759a9f1a0002f42c3a91b2c6b2d75
Jira: STUDIO-5947
(cherry picked from commit 97d687b7c88f8cd51b8eddd39120349d8eac42b1)
* FIX: fix some issue in multi machine
JIRA: STUDIO-6934 STUDIO-6888
1. Fix the issue of incomplete display caused by excessively long file names
2. Fix the issue of icon display being too large
3. Fix the issue of garbled Chinese characters in the task list
Change-Id: I36bc10bf2067f44aaa7e3651b58e526ea323c8ad
* FIX: Incorrect multiplier, when the multiplier is set to below 1
github: #3987 #3805
1. In some languages that use commas as decimal points, setting multiplier below 1 will resolve to 0
2. Unable to save multiplier correctly
Change-Id: I62bc55e270929ebb5e910eb79c6f97106e842b93
* Arrange
* FIX: wrong wipe tower when open 3mf file
1.wipe tower pos in 3mf was overwritten by default pos when opening 3mf
with a different printer profile.This patch fix it
jira: STUDIO-5890
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I12e5d4b80a0ad86194db0682c1763ba4a9492521
* ENH: update A1 machine gcode
1.Adjust the y position of the A1 extrusion compensation line
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Iea690a0184ae10a47f53e1532272c31fc0a04cfa
* FIX: minor spelling mistake in gcode
github:#3477
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Id3201bf8b8125ce060e2cac102ab2525877e27c1
* FIX: slice crash with height_range
github: 3917
Change-Id: Icdf83013213b47935b7a795ed75cc3d49057665d
* FIX: ERROR_RES_BUSY text
Change-Id: Ifde1a7b0c6ab915eb226c2072c46edd40f60cf9a
Jira: STUDIO-6436
* ENH:Unable to send printing without selecting a device
jira:[STUDIO-6850]
Change-Id: Ic537579727fd1618af364db93fce8fbbe4cd635a
* FIX:add exit_gizmo before slice model
jira: STUDIO-5531
Change-Id: Icddc9d73b3d91bb68e9768d13e48cbae0680e58e
* FIX: PrinterFileSystem report real connect error
Change-Id: Id6750cfa2a98fe8325ba677dabb606a0a701b495
* FIX: add can slice judgement in slice all plates processing
jira: STUDIO-6325
Change-Id: Ic7fb8cef000c03210bb77289a570ee6b60b6083e
* FIX:Fixed error in displaying the name of Bambu filaments
Change-Id: Ib42194c07b6eefe793eec81a588debc9d622d951
* FIX: text hidden in calibration tab
jira: STUDIO-6264
Change-Id: I24fbc590638a3213d948a973422e010486113923
* FIX: logic error in PLA fan control
github PR: #3948
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I28e4a673e590e83d151e92cc82caab45012aeabe
* FIX:upgrade cluster algorithm to remove duplicate labels
jira: none
Change-Id: I4d68d8cd8e080932c7c308bc8f69e27546ffe309
* FIX: can not parse json float in ES on macOS
jira: STUDIO-5889
Change-Id: I622f4b474c378d77b0e43d67a320f023be2d5811
* ENH:Clear the value of the previous nozzle type
jira:[for nozzle check]
Change-Id: I9a932b833fb07de6cb0a91abe6372b0e91f273f1
* ENH: update A1 gcode
1.Modify the width of extrusion compensation line
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I90543758c866d74f2154e3135d7569109def84b8
* FIX: the height range is not valid in assemble object
github: 3876
Change-Id: Id38672bbf0c01bc9b9f0a3e2bf1052d945b45131
* FIX: calibration page text hidden in linux
jira: STUDIO-6264
Change-Id: If210abf64057eb2e9c2c5b11d41fa33f18684c72
* ENH:clear nozzle information
jira:[STUDIO-7050]
Change-Id: I15ca4973d09132ddb5cb5a56bedd795ba6976b27
* update plugin version
---------
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Co-authored-by: afriede <me@afriede.dev >
Co-authored-by: Momin Al-Ghosien <momin@sanestudios.com >
Co-authored-by: zhou.xu <zhou.xu@bambulab.com >
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com >
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com >
Co-authored-by: tao wang <tao.wang@bambulab.com >
Co-authored-by: Arthur <arthur.tang@bambulab.com >
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com >
Co-authored-by: xun.zhang <xun.zhang@bambulab.com >
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com >
Co-authored-by: liz.li <liz.li@bambulab.com >
2024-05-19 21:22:14 +08:00
SoftFever
226450ea6a
Merge some features from BS1.9 beta4 ( #5181 )
...
* FIX: linux: fix the building issue on Linux Mint 21.3 Virginia
github: https://github.com/bambulab/BambuStudio/issues/3874
author: https://github.com/lucianoloder
Change-Id: Ia3db6923d5dd68dba532d7bdba6f93f73cc51d59
* FIX: auto-arranging incorrect with rotation enabled
auto-arranging incorrect with rotation enabled and the objects already have been rotated.
jira: STUDIO-6022
Change-Id: I349d663efb1fc71367c8a77aa8ed5047a0bf2017
(cherry picked from commit 75fe40257a274ed83886e1ee20ce8dedd0de48f6)
* ENH: update X1C & X1E start gcode
1.Fix fan problem
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I68ee5be78e142e8a2a210a1a70f5663893390610
* ENH: update A series gcode
1. Update A1 series start gcode and change filament gcode
2. Add G2814 command
3. Add multi-filament extrusion compensation and vibration suppression
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I57d2bc8e98d3e547881dc1369c1fb31413c6205d
* FIX: fix some cali problem of P series
jira: none
Change-Id: Id57ea8d65da22ab653cca49509cb923ff065e43f
* FIX: fix can't enter ',' in multiplicator
github: #3805
Change-Id: I6dd70822d1c2e79d66c70514d6dd580ab029c7ea
* calib wizard
* NEW: FlipLines infill
jira:6701
New infill pattern that combine block lines infill and switching layers for smooth transition.
Change-Id: I2608a2d39b14efcdfe9d39a9437280da350b94c0
(cherry picked from commit 8d0a09c8b763dfc924cbba9913c241e6afadbc7f)
* ENH: add nozzle blob detection and air printing detection
jira: new
Change-Id: Ie4a19a7ad7d0b10a021c516cbc3a84b4ae734302
* FIX: Top surface bridging fail on 3DHC & FL infill
Add 45 degree angle offset when processing the bridge.
Need to raise infill_direction to invalidate posPrepareInfill
jira: 6774
Change-Id: I5e6bef3aa814b01c5f30398ac745937a67e3ef4c
(cherry picked from commit 7b12cab10b88f432a11414f8caa1c6427777a1ba)
* FIX: the error display when reset virtual slot
jira: none
Change-Id: I5ae5899baf1bfc2aaadb832083b277855a669fd5
* FIX: Error "Voronoi cell doesn't contain a sourcepoint"
github: 3859
Change-Id: Idca84992bcba5380bfe05e63ac9a5e40419dcfdf
* fix build error
* FIX: CLI: fix the crash issue caused by get_min_flush_volumes
JIRA: no jira
Change-Id: I0d5bfd605e51ebddac8fddc4d83dab5055b0fbf2
* FIX: can't use support filament in gcode.3mf
1. Add total_filament_volumes, directly access it to get used filaments
github:#3865
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I4fae4f1947b4ebd16e394e0f3cf5fb0e9f979717
* ENH: p series support long retraction
1. P series support long retraction in filament
2. Add long retraction params in common.json
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ib94184fa1f0b5ab151360f1f053d8c8ff92e7e18
* ENH::modify some logs level
jira:[for log]
Change-Id: I6a46b8fcd3a030b4b630e800fe9a9ac5c387f117
* NEW: support multi device
JIRA: STUDIO-6072
Change-Id: Ic514c4097767b0a728368c9ea48ee103c031fbb0
Signed-off-by: Stone Li <stone.li@bambulab.com >
* ENH: update A1 series gcode
1.Update filament change gcode and machine start gcode for
A1 and A1 mini
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I2f3be3fd89fef21e717a32f2b89985fc046f7f6e
* FIX: always have 0th filament in ams mapping
1. Only set the filament id in map when flush length is not 0
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I6e0aeaf010f6e6dcbdc3bca5c0034aa60750bb67
* ENH: add filament id in slice info
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ic5fe4632bca8acacc9ffd072ee2ed207c1da37aa
* ENH: refine ui for multi machine
JIRA: STUDIO-6819 STUDIO-6824
1. Shrink the Send Print dialog box
2. add input box for flipping panel
Change-Id: I4174c79ecd239c374ee11478951e12be399c57ce
* FIX: fix Issues with sending multiple devices
JIRA: STUDIO-6876
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com >
Change-Id: I33c6a932863fc715c3f0eb5dfd4b299f980a4918
* NEW: support hms error code
Change-Id: Ic256a83cf501fb05bb9d3203f3d24cb1d1290fa4
* FIX:fixed some multi job issue
Change-Id: I338078ad8fcf809888db9d8daeb470a9bf4eab46
* NEW:support pin code binding
Change-Id: Ida5d47881fbd83f3ffedc80369cfe377114d7f13
* ENH:add printable check for devices
Change-Id: I672988fa9cfa986d924bfc64331752f4aef68067
(cherry picked from commit 69de9e5b8334ec94eec7fcee31038b8ff42d1d3b)
* FIX: add more fonts
jira: none
Change-Id: I6bafed3563083858f29e92a3d84906a2e53dcb5c
(cherry picked from commit afbea693e807dcc1c406a59aa5376b9ea2a5d606)
* ENH: load more fonts
this feature is according to Prusa by Filip Sykala<filip.sykala@prusa3d.cz >, thanks to Filip Sykala
jira: none
Change-Id: I55e92f184f750c0b93b679d4382aaa5b164ec5c3
(cherry picked from commit d05522c4cc5d7ee4cac42de398b88d347a55f74b)
* ENH: add ProfileDescription for translate
1.Add ProfileDescription.hpp simply for translating
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com >
Change-Id: Iaa3ced1edccf67eaeebde35c1e8b36442d2e9a6f
* ENH: Improve CrossHatch transation layers
jira: 6701
Change name from Flippingline to CrossHatch.
Reduce noise, improve speed by 6.5%. Improve transation layers by
gradually increasing rotation angle and overshoot the transation
layer while direction changed.
Change-Id: I17fcc45b409074d121bf5bb5702e15553d925b51
* UP
* ENH: modify the default config for multi-device
JIRA: STUDIO-6072
Change-Id: If6e7582a8274eb5e685b8b8545f6eab5d17de3f5
Signed-off-by: Stone Li <stone.li@bambulab.com >
* ENH: add long retraction for P series
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: I6890695b67e674fc5cdc2a208e89bd9e41404213
* FIX: all plates stats data missing issue
jira: new
Change-Id: I137a2b6d69ad08791f5a9a9788653621960dc63f
* ENH:update pre print options
jira:[for multi]
Change-Id: I2e9bb8a09436a71749af98a0bad94e9922f95c81
* FIX:fixed can't popup pinbind win on macos
jira:[STUDIO-6895]
Change-Id: I664bba78cf27420d736b586df19e3c09c6f8ed21
* FIX:fixed the task of padding cannot be cancelled
Change-Id: I401a22118c14ca7601be7a925cfd8e4796dfc1e9
* ENH:Play video after redirecting to device page
jira:[STUDIO-6884]
Change-Id: Ia5e2ac84e3d71baacfcf941b782dab2325f35d54
* FIX: fix ui bug in send multi machine page for mac
JIRA: STUDIO-6882
Incorrect background color when renaming during multi machine printing
Change-Id: I6c551f5023ffe747e7a7e2f5703b0707c9505922
* FIX: Fix some bugs in maintaining the selected status of local tasks
JIRA: STUDIO-6824
Change-Id: I12c4da3fc56ac5077b3ccd7e89a4b57c3675eaf5
* ENH: local task sort by send time by default
JIRA: STUDIO-6885
Change-Id: I03b5881a39ab2e90c5b9cf46052ba465ee707ccc
* FIX: Clicking to continue printing does not take effect in error code
JIRA: STUDIO-6830
Detected an incomplete printing task error pop-up when power outage occurred. Clicking to continue printing did not take effect
Change-Id: Ie85a1602093dabac861cd1f41ea21e1c312c83e9
* ENH: use designTitle when designId > 0
JIRA: STUDIO-6072
Change-Id: I8342df053edeab16f930522e099e2eef91e5c5a4
Signed-off-by: Stone Li <stone.li@bambulab.com >
* NEW:import vertex and mtl color from obj file
Jira: STUDIO-6805
Change-Id: Iaacb13ee2451effdb83e5aba4b7fe1637b7fc95f
* FIX:change the strategy of merge_ka_kd
Upgrade ui, users can directly ok to proceed to the next step
jira: STUDIO-6805
Change-Id: Ia81019c2eacb503666680c0b8583d026baa0134c
(cherry picked from commit 38a2434753c8e3b422267283b16c75f6ad195b14)
* FIX:use default_strategy after modifed cluster number
jira: STUDIO-6915
Change-Id: I4e0c3d62f5a766f73d48d1e06c4364fc6babe1ac
* FIX: the bug of incorrect button without restarting
JIRA: STUDIO-6824
The bug can cause the user to not restart when opening the multi-device option, but the button of send multi-devices appears
Change-Id: I0837fa79ecc1d8ab5ce98273ad134fa2f830421e
* FIX: wrong default value for long retraction
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com >
Change-Id: Ifc2ec57a320fdb14e7ca746e5795501ed146ff32
* FIX: error code pop-up window without retry button in some code
JIRA: STUDIO-6922
Change-Id: I67464bebaba4558618301592c455db8824bbfe30
* FIX: air printing and nozzle blob detection issue
jira: STUDIO-6897
Change-Id: I008ddb24b74119d7e4124ae26310b4b86c42a799
* FIX:fix bugs of algo and read quad in obj file
Jira: STUDIO-6805
Change-Id: I6c33e8197225f27dccdfa0681e64d76d1df14f61
* dd
* ENH:Set the default nozzle diameter to 0.4
jira:[for nozzle]
Change-Id: I74a5c9b0460046496b897eae3d9f917ac1b99052
* FIX:fixed backspace error on macos
Change-Id: I76066391783c04857c1a60a6f8438111501b6d7c
* ENH:Subscription list deduplication
jira:[for mulit]
Change-Id: I10e9d849986c9661b587c7b1a509180c2451816e
* ENH:update wiki url for Pin Code
jira:[pin code]
Change-Id: I95faaa396a839b5b159119ef235b650c76706a84
* NEW:add OpenCV.cmake in deps
jira: none
Change-Id: I1ae4a2bd5618e9e620b08a937904d6af5d00bc41
* FIX:cancel obj import restrictions
jira: none
Change-Id: Iaf3e799ca982ad6aeb3ec76e9a416c4c8e4d100c
* NEW:add multiple printer restrictions
jira:[for multiple]
Change-Id: I0bb5a0c1062a543c42f8d67a9347efa358b0864a
* ENH:Added two entrances for adding devices
jira:[multi device]
Change-Id: Ieb6197e067d422979606f93b22b337a2399aec74
* slic3r: Fix wxFont being undefined
[427/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp
In file included from /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp:1:
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.hpp:51:21: error: ‘wxFont’ does not name a type
51 | bool can_load(const wxFont &font);
| ^~~~~~
* slic3r: Fix missing BOOST_LOG_TRIVIAL declaration
[427/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp: In function ‘std::unique_ptr<Slic3r::FontFile> Slic3r::create_font_file(const char*)’:
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp:127:27: error: ‘error’ was not declared in this scope; did you mean ‘perror’?
127 | BOOST_LOG_TRIVIAL(error) << "Couldn't open " << file_path << " for reading.";
| ^~~~~
| perror
[447/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o -c /run/build/BambuStudio/src/slic3r/GUI/TaskManager.cpp
In file included from /run/build/BambuStudio/src/slic3r/GUI/TaskManager.cpp:1:
/run/build/BambuStudio/src/slic3r/GUI/TaskManager.hpp: In member function ‘void Slic3r::TaskStateInfo::set_state(Slic3r::TaskState)’:
/run/build/BambuStudio/src/slic3r/GUI/TaskManager.hpp:40:9: error: ‘BOOST_LOG_TRIVIAL’ was not declared in this scope
40 | BOOST_LOG_TRIVIAL(trace) << "TaskStateInfo set state = " << get_task_state_enum_str(ts);
| ^~~~~~~~~~~~~~~~~
* fix OpenCV
* wip - build break
* fix build error wip
* ENH: support preset description(tooltip)
Change-Id: Iff005baac4974c538d1109fb0ba1df20b04a8f69
Jira: STUDIO-5754
* fix more build errors
* Revert "ENH: load more fonts"
This reverts commit 32b6fd199axun.zhang@bambulab.com >
Signed-off-by: Stone Li <stone.li@bambulab.com >
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com >
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com >
Co-authored-by: lane.wei <lane.wei@bambulab.com >
Co-authored-by: Arthur <arthur.tang@bambulab.com >
Co-authored-by: xun.zhang <xun.zhang@bambulab.com >
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com >
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com >
Co-authored-by: jianjia.ma <jianjia.ma@bambulab.com >
Co-authored-by: liz.li <liz.li@bambulab.com >
Co-authored-by: tao wang <tao.wang@bambulab.com >
Co-authored-by: Stone Li <stone.li@bambulab.com >
Co-authored-by: zhou.xu <zhou.xu@bambulab.com >
Co-authored-by: Bastien Nocera <hadess@hadess.net >
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com >
2024-04-28 22:58:47 +08:00
