Also change words for extruder clearance parameters.
Change-Id: I736fd9049d184c140b33078d78f764b4fe172765
(cherry picked from commit e70c0c0ea133cffa5788efbfc9633332b196e8df)
Towline may be even lower than the upper rod. Let's
take away 10mm tolerance.
Change-Id: I13972fc4ecb0671e1af4b2c6d102e319417e532f
(cherry picked from commit cedcb862556c8c9014a91ef2aad8f39fc118d925)
1. use strict ordering to ensure the printing order is right
2. reduce height-to-lid to 100mm considering towline is lower than lid
and may collid with objects
TODO: printing brim may still collide, need to subtract inflated boundary of
others during brim generation
Change-Id: Icf0cba10c579d28fabd97764c1b3abec267ebd9b
(cherry picked from commit 46c6f5ff94488b2f4481bf1d34555f4a7c45e135)
This may cause tall objects be printed before short ones. There are two
possible solutions:
1. do strict ordering only when y-overlap is large enough (the one
chosen in this commit)
2. when considering vertical collision with rod, the actual expansion
can be much smaller (because the rod is only slightly off extruder).
But this solution requires an extra parameter. Let's hold it for a
while.
Change-Id: Icc9a4796d49dad93cbcc20d4103e641a48886e5e
(cherry picked from commit 6a958b1fa9e58e4ca3be63b4918da77bcdc53314)
(cherry picked from commit ceff67789c27ea576afd663a2e5bae9a10241728)
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
Root cause:
support_floor_layers_above is not properly set,
so adjust_layer_height() fails to detect extremes,
and then deletes the middle layers.
Also reduce max_bridge_length to 10mm.
Jira: STUDIO-1084
Change-Id: I1e72a0600ec7e2b812705e45b47b76189152daac
1. do not consider extrusion calibration region if no micro lidar on the
printer
2. do not inflate extrusion calibration region by brim width, just let
them overlap
Change-Id: I62228d85e8a55d40e22a6ae7f5f065f281936429
(cherry picked from commit 4c456e1f3e675a2ea1358d2983f85a95e58eb49c)
1. hybrid(auto) on_buildplate_only option not working correctly because
parent is not set.
2. tree(auto) on_buildplate_only not working correctly because unsupported
branch isn't deleted completely. I add child to track the dangling nodes
and then delete nodes with no child.
Change-Id: I24c69a7cf400d2961b22a720a6069cf95db6c1a5
(cherry picked from commit bce77c16128d35c668b175e7135b9fe9acd71d13)
When this option enabled, only generate supports for sharp tail, cantilever,
thin pillar (not well supported). So holes are safe from unnessary supports.
Currently only works for tree supports, will need to copied to normal
supports if it works fine.
Change-Id: I5eb86484a5b503149e3bfdee8ce73f76a0a849e4
1. unsupported sharp tails and large overhang have different messages
2. do not popup warning for total area (only warning for one single
large overhang)
Change-Id: I153e559915a92c6676468539cf619dafe915f997
(cherry picked from commit 67b593150f8de847d9b1999bf0d7a549eb1ef154)
1. fix sequential printing tall objects. Now the print order is not determined by auto-arrange,
so wee need to add a new rule: lower objects should not exceed height_to_rod.
2. sequential printing is better centered.
Change-Id: Ic320722654f0335d2589060fa14c71a5aaa3f571
0. disable arranging selected
1. fix bug where brim is not correct.
2. fix bug where big circle objects are not arranged properly
3. disable default enable_rotation
Change-Id: Ifc69f35d900ff63ec1e9ec8bf8638afc6ea7d54b
(cherry picked from commit 2ed1b0dd8573a1e10aaf77f0d9f8896cef304427)
Arthur