6b03b66167
Renamed the new "printhost_ignore_check" option to "printhost_ssl_ignore_revoke"
Improved the Physical Printers dialog in regard to the new option checkbox
(added tooltip to the checkbox, moved it to the end of options).
Disabled the host_xxx options at the command line interface, they no
more work after these options were separated to Physical Printers profiles.
Little refactoring of Http.cpp/hpp, OctoPrint.cpp/hpp
Private local variables prefixed with m_, some renaming for clarity.
list of modified options.
Optimization of DynamicConfig::equals(), ::diff(), ::equal()
to iterate over the two compared std::map trees instead of
first generating a list of keys and then searching for each key
in the respective map.
Optimization of PresetCollection::current_is_dirty() and ::saved_is_dirty()
to call DynamicConfig::equals() instead of ::diff().
of a printer from MMU to non-MMU (when number of extruders changes).
Also slightly optimized in case a MMU-painted object is sliced in
single extruder mode.
In case the configuration snapshot cannot be taken before installing
configuration updates (because the current configuration state
is invalid), ask user whether to continue or abort.
1) Slic3r::RuntimeError was replaced with ConfigurationError,
all exceptions thrown by the configuration layer are derived
from ConfigurationError.
2) When parsing configuration files, ConfigurationError is catched and
rethrown extended with the file name being parsed.
1) Starting with this commit, configuration block exported into G-code
is delimited by "; prusaslicer_config = begin" and "; prusaslicer_config = end".
These delimiters look like any other key / value configuration pairs
on purpose to be compatible with older PrusaSlicer config parsing from G-code.
2) Config parser from G-code newly searches for "; generated by ..."
comment over the complete G-code, thus it is compatible with various
post processing scripts extending the G-code at the start.
3) Config parser from G-code parses PrusaSlicer version from
the "; generated by PrusaSlicer ...." header and if the G-code was
generated by PrusaSlicer 2.4.0-alpha0 and newer, it expects that
the G-code already contains the "; prusaslicer_config = begin / end"
tags and it relies on these tags to extract configuration.
4) A new simple and robust parser was written for reading project configuration
from 3MF / AMF, while a heuristic parser to read config from G-code located
at the end of the G-code file was used before.
1) New environment variable SLIC3R_PP_HOST contains one of
"File", "PrusaLink", "Repetier", "SL1Host", "OctoPrint", "FlashAir", "Duet", "AstroBox" ...
2) New environment variable SLIC3R_PP_OUTPUT_NAME contains the name
of the G-code file including path (for SLIC3R_PP_HOST == "File")
or a name of the file after upload to the host (PrusaLink, Octoprint ...)
3) The post-processing script may suggest a new output file name
(likely based on SLIC3R_PP_OUTPUT_NAME) by saving it as a single line
into a new "output name" temp file. The "output name" file name is
created by suffixing the input G-code file name with ".output_name".
Please note that the G-code viewer visualizes G-code before post-processing.
Fixes Broken PostProcessing when script changes out-filename #6042
Make is_converted_from_meters / is_converted_from_inches exclusive-or.
Maybe it would be better to make a single enum from the two booleans,
if they are exclusive-or?
1) Polished up wording of the error messages.
2) Made some messages in the SysInfo dialog localized.
3) Renamed LibraryCheck.cpp/hpp to BlacklistedLibraryCheck.cpp/hpp
4) CPPized the BlacklistedLibraryCheck WIN32 C code.
string or an UTF-8 string. Let's convert it to wxString before
showing an error message box.
boost::system shall return UTF-8 localized error messages as long
as we set -DBOOST_SYSTEM_USE_UTF8 in the top most CMakeFiles.txt,
which we do.
sets of optional boolean parameters, the cut function "keep upper",
"keep lower" and "flip lower" boolean parameters were converted into
a single type safe enum_bitmask. Such a coding style is certainly
wordier than the original code, but much safer and more readable
than the error prone "boolean, boolean, boolean" function call
parameter list.
config bundles, project files (3MFs, AMFs). When loading these files,
the caller may decide whether to substitute some of the configuration
values the current PrusaSlicer version does not understand with
some reasonable default value, and whether to report it. If substitution
is disabled, an exception is being thrown as before this commit.
If substitution is enabled, list of substitutions is returned by the
API to be presented to the user. This allows us to introduce for example
new firmware flavor key in PrusaSlicer 2.4 while letting PrusaSlicer
2.3.2 to fall back to some default and to report it to the user.
When slicing from command line, substutions are performed by default
and reported into the console, however substitutions may be either
disabled or made silent with the new "config-compatibility" command
line option.
Substitute enums and bools only. Allow booleans to be parsed as
true: "1", "enabled", "on" case insensitive
false: "0", "disabled", "off" case insensitive
This will allow us in the future for example to switch the draft_shield
boolean to an enum with the following values: "disabled" / "enabled" / "limited".
Added "enum_bitmask.hpp" - support for type safe sets of options.
See for example PresetBundle::load_configbundle(...
LoadConfigBundleAttributes flags) for an example of intended usage.
WIP: GUI for reporting the list of config substitutions needs to be
implemented by @YuSanka.
notification with some locales, we don't want PrusaSlicer 2.3.0/2.3.1
to show this notification. On the other hand, we would like PrusaSlicer
2.3.2 to show an update notification of the upcoming PrusaSlicer 2.4.0.
Thus we will let PrusaSlicer 2.3.2 and couple of follow-up versions
to download the version number from an alternate file until
the PrusaSlicer 2.3.0/2.3.1 are phased out, then we will revert to
the original name.
that configuration could be recovered in the case PrusaSlicer.ini
is corrupted during saving. The config is first written into a temp file
marked with a MD5 checksum. Once the file is saved, it is
copied to a backup file first, then moved to PrusaSlicer.ini.
When loading PrusaSlicer.ini fails, the backup file will be loaded
instead, however only if its MD5 checksum is valid.
The following "Fixes" comments are for github triggers. We implemented
a workaround, not a fix, we don't actually know how the data corruption
happens and why. Most likely the "Move file" Windows API is not atomic
and if PrusaSlicer crashes on another thread while moving the file,
PrusaSlicer.ini will only be partially saved, with the rest of the file
filled with nulls. We did not "fix" the issue, we just hope that our
workaround will help in majority of cases.
Fixes prusaslicer wont open 2.3 windows 10 #5812
Fixes Won't Open - Windows 10 #4915
Fixes PrusaSlicer Crashes upon opening with "'=' character not found in
line error" #2438
Fixes Fails to open on blank slic3r.ini %user%\AppData\Roaming\Slic3rPE
structured exceptions (hard crashes, segmentation faults...),
converts them to Slic3r::HardCrash exceptions and displays the exception
using the usual PrusaSlicer way.
The SEH handler is installed on the main background slicing thread
as of now, therefore hard crashes in TBB worker threads are not handled.
Renamed its_create_neighbors_index() / its_create_neighbors_index_par() to its_face_neighbors() / its_face_neighbors_par().
New variant of its_face_edge_ids() to create edge IDs from face neighbors.
Fixed some incorrect use of _NDEBUG, it should be NDEBUG.
PrintObject::slice_support_volumes() returns newly Polygons, which are cheaper than ExPolygons.
Updated SeamPlacer and SupportMaterial to use regions defined as Polygons, not ExPolygons.
TriangleSelector::get_facets_strict() returning a patch with T-joints retriangulated.
New slice_mesh_slabs() - slicing projections of a triangle patch into top / bottom layers of slices, for MMU top / bottom segmentation.
TriangleMeshSlicer - use 64 mutexes instead of one when scattering sliced triangles into layers. This makes a big difference on modern many core desktop computers.
When applying MM segmented regions to input regions, the split regions are now re-merged with 10x higher positive offset epsilon to avoid creating gaps.
When testing for existence of paint-on supports or seam, use a more efficient has_facets() test, which does not deserialize into the expensive TriangleSelector tree structure.
GLIndexedVertexArray newly uses Eigen::AlignedBox<float, 3> for efficiency instead of our double based BoundingBoxf3.
Improved MMU painting refresh speed by optimizing generation of the vertex buffers.
Refactored MMU segmentation - projection of painted surfaces from top / bottom.
1) Parallelized.
2) Using the new slice_mesh_slabs() instead of projecting one triangle by the other and merging them with Clipper.
1) Fixing yesterday's regression in deserialization of older painted 3MFs
(order of triangle children is now reversed, thus the serialization
/ deserialization has to take it into account).
2) WIP extraction into facets to triangulate T-joints.
1) When splitting a triangle, vertices are now properly shared with
the neighbor triangles, if these are already split.
Please note that the splitting may not be regular if the splitting
thershold is changed between splitting calls. Still the new code
shares the vertices accross shared edges properly.
2) Triangles resp. vertices are newly reused after deleted using
linked lists of released triangles resp. vertices.
This mechanism replaces the old mechanism of reusing already split
triangles.
TriangleSelector::valid refactored to m_valid and valid()
and bool members moved next to each other to shrink data structure
size due to memory alignment.
Changed the serialization structure
std::map<int, std::vector<bool>>
to a significantly more compact
std::pair<std::vector<std::pair<int, int>>, std::vector<bool>>
Such change shall significantly improve efficiency of Undo / Redo stack.
S3D's strategy for merging self intersecting models is "Even / Odd"
which PrusaSlicer now supports as an alternative to "Positive" rule.
Also added a "Close Holes" option to fill in all internal structures.
3D-Labprint Models aren't sliceable (till years) #3062#3708
Vojtech Bubnik