We decide to set brim width of all objects to MAX_BRANCH_RADIUS_FIRST_LAYER if there is an object with tree support after discussion.
Jira: MAK-2009
Change-Id: I4c4940800632c433235966b01c44ac910e33a51c
(cherry picked from commit bambulab/BambuStudio@2bd6b11505)
Co-authored-by: Arthur <arthur.tang@bambulab.com>
1. Improve generation speed by removing unnecessary get_avoidance.
2. Fix a bug of hybrid support's interface (Jira: STUDIO-4878,
STUDIO-4726, Github#2614)
3. Fix a bug of tree support pass through objects (Jira: STUDIO-4252, STUDIO-4608
STUDIO-4298)
4. Fix a bug with first layer + Arachne (Jira: STUDIO-4281, Github #2423)
Change-Id: I40978c93ab93fa6964483514dad552d73a66c710
(cherry picked from commit 2ccbbe49c74d4aab4f086e79a6f8262b7fc80f15)
(cherry picked from commit bambulab/BambuStudio@d7a4623380)
Co-authored-by: Arthur <arthur.tang@bambulab.com>
1. add a hook inside tree branches for improved strength
2. fix the issue that interface may fly as a mess (delete the logic
where gap nodes can skip dropping down)
3. fix the issue that base nodes may fly as a mess (smoothing should
skip polygon nodes, see Jira:STUDIO-4403)
Change-Id: Ie9f2039813c2ca3127ed8913304cc455fec8e7ee
(cherry picked from commit 83cef5f91d49ff3d275a89ec3df8b5f0fd573f8c)
(cherry picked from commit bambulab/BambuStudio@76f876a3c6)
Co-authored-by: Arthur <arthur.tang@bambulab.com>
**The latest download link can be found from the "Checks" tab above or
[here](https://github.com/SoftFever/OrcaSlicer/pull/8256/checks). There
should be an "artifact" dropdown on top of that page once the build is
completed.**
This PR solves the following problems:
- Bind printers in different subnet
- Binded LAN printers are not automatically connected when switching to
Device tab
Few improtant things to know:
The automatic printer info detection (ie, the step in the first image)
doesn't work on MacOS, when you click "Connect" you will immediately be
prompted to the second image to enter the printer details. (I don't know
why but Bambu does not provide this capability on MacOS for their
network plugin)
AFAIK, P1 series do not support automatic printer info detection (as
tested by @SoftFever and myself), so the first step is gauranteed to
fail, which is unfortunate but expected. Simply click the "Manual Setup"
button (which will appear after clicking the "Connect" button then wait
for a while) and enter the printer detail and you should be good to go.
If anything entered wrong, you could simply unbind the printer and do it
all over again.
I know current binding flow is not very user-friendly, but consider how
rare this will be used, I think it's OK. Given the current situation
this is the best I could do with the closed-source Bambu network plugin.
I only have a P1 so I couldn't throughly test this PR. Please if you
have different printers and home network configurations, your feedback
are valuable to help validating and improving this PR, thanks in
advance!
Fix#6169Fix#8097
* FIX:update custom_texture when new_shape=false
Jira: STUDIO-5287
Change-Id: I3add95f9f9345c14a48cc7467513d1b3ce95f4c9
(cherry picked from commit 9ce7de10f4)
* FIX: correct the bed model to the print area origin point
Change-Id: Ieb856dff421d39694966e3c13c519f4ffa3da5c2
(cherry picked from commit 32892514ff)
* Avoid unnecessary copy of `position` parameter
* Merge branch 'main' into bugfox/plater-y
Fix issue `Preset name "0.20mm Speed @MK3S 0.4" was marked as renamed from "0.20mm Standard @MK3S", though preset name "0.20mm Detail @MK3S 0.6" was marked as renamed from "0.20mm Standard @MK3S" as well.`
Compare the custom gcode z to `0.5*(layer_z[n] + layer_z[n+1])` instead of `EPSILON`
to compensate float rounding error during gcode processing (SoftFever/OrcaSlicer#7834)
* Fix style preview size per resolution
(cherry picked from commit b67c4785f0d300b5615126ea1df1d518dd6d00b0)
* Align font preview to left. (closer to font name)
(cherry picked from commit eb9b8c0c2b112f0f7649e58f4f6d7977380b8442)
---------
Co-authored-by: Filip Sykala - NTB T15p <Filip.Sykala@Prusa3D.cz>
Field: SpinCtrl: Removed code that was relevant for wxSpinCtrl, but not for the new SpinCtrl.
(fix for SPE-2050)
(cherry picked from commit 555193f6ec477d4107f8998c7a3c441cde72382c)
Co-authored-by: YuSanka <yusanka@gmail.com>
* Make sure the `m_extrusion_quality_estimator.set_current_object()` is called after regional config has been applied (SoftFever/OrcaSlicer#7946)
* Init `m_extrusion_quality_estimator` based on region config
* Revert "Make sure the `m_extrusion_quality_estimator.set_current_object()` is called after regional config has been applied (SoftFever/OrcaSlicer#7946)"
This reverts commit d13d4a47b7.
* Call `m_extrusion_quality_estimator.set_current_object` regardless, because that doesn't hurt
* Add a comment
* Revert "SPE-1950: Optimization of computation complexity of perimeter ordering for Arachne generator."
This reverts commit 47ec9b9b06.
* Revert "SPE-1963: Improve ordering of perimeters with Arachne perimeter generator"
This reverts commit babb84c70a.
Fix issue that the contact layer is printed in wrong filament when interface layer number is set to 0
Cherry-picked from prusa3d/PrusaSlicer@ca5f6da08d
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* SPE-1950: Reimplement algorithm for filtering vibrating extractions inside the ensuring infill to make it less computation complex.
Cherry-picked from prusa3d/PrusaSlicer@b3510ac808
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* Remove unused file
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
The previous implementation during the grouping of perimeters using depth-first searches unnecessarily searched nodes that had no impact on grouping, which significantly increased the search space.
Cherry-picked from prusa3d/PrusaSlicer@86309ba939
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
Especially in cases when the object is composed only of 2 external perimeters and 1 or 2 internal perimeters, the order of perimeters wasn't optimal and differed from the Classic perimeter generator. That caused unnecessary long travels before the external contour was printed.
The ordering of perimeters is slightly inspired by the latest changes in CuraEngine.
Cherry-picked from prusa3d/PrusaSlicer@10875082de
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* Arachne: Fix an arithmetic overflow that causing extra points outside the plate (SoftFever/OrcaSlicer#7321)
* Better way of avoiding overflow, works in Release mode as well
* Fix debug build
* Fix build
Accessing a moved object.
Also this method create an unused "out" variable by removing from the parameter.
I guess It should update the parameter object?
Anyway, seems very wrong
(cherry picked from commit 534792e249da3efb83a62279f532b6690d028592)
Co-authored-by: Merill <merill@free.fr>
Fixed Clipper library (our own fork of it) when working with Z coordinate:
The Eigen vector type compares all components, while the ClipperLib
own IntPoint type compared x and y only.
Fixed by overriding the ==/!= operators to compare just x and y components
for Eigen types.
Cherry-picked from prusa3d/PrusaSlicer@0202eec4b7
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
If layer starts with a color change, the full layer time will be much longer, which will trick the slicer to think this layer has enough cooling time.
However the actual filament extrusion time (the real "printing" part) won't necessarily have enough time to cool down, so if we don't do extra slowing down
before starting next layer, the filament could still be soft and lead to worse surface quality.
* Pass all compatible regions to perimeter generator
* Simplify & unify fuzzify detection
* Simplify `to_thick_polyline`
* Group regions by fuzzy skin settings
* Initial code structure of multi-regional fuzzy skin
* Determine fuzzy type by all compatible regions
* Add fuzzy region debug
* Implement the line split algorithm
* Do splitted fuzzy in classic mode
* Disable debug macros
* Fix infinit loop issue when segment points are out of order
* Fix path connection
* Implement splitted fuzzy in Arachne mode
* Fix issue that github action windows build could not find win10sdk (SoftFever/OrcaSlicer#6724)
* Another attempt to fix the build issue
* This should work now
Noisyfox