PartPlate::store_to_3mf_structure read first_layer_time from the indirect cali_bboxes_data struct,
which the GUI populates at Plater.cpp:10600 but the CLI never writes to. The result was uninitialized
memory leaking into slice_info.config
Read directly from get_slice_result()->initial_layer_time, which is populated by
GCodeProcessor::finalize() in both code paths and matches the pattern already used a few lines
above for gcode_prediction.
Also default-initialize PlateBBoxData::first_layer_time to 0.0f as a defense against any other consumer
reading it without an explicit write.
build: clear 54 dead private fields
54 of the 161 -Wunused-private-field warnings, across 31 files. These are
the ones needing no judgment. Each member is declared once and appears
nowhere else in src/, counting the .mm and .c sources as well as .cpp and
.hpp, so nothing writes them and nothing reads them. Every removal is a
whole line, and no declaration shares a line with another member.
The remaining 107 are left alone. Those members are mentioned elsewhere,
usually assigned and never read, where the fix might be deleting the
member or might be restoring a read that went missing.
build: clear 53 unused value warnings
49 of them are deliberate i18n markers. L(s) expands to s, so
L("Main Extruder"); is a string literal as a statement and its value is
discarded. The strings have to stay, because the real values come from
printers/*.json at runtime and xgettext cannot scan those. Each block is
now a static const char *const markers[], which uses the values rather
than discarding them. Extraction is unchanged: the xgettext invocation
from scripts/run_gettext.bat gives 76 msgids over the two marker files
before and after, with identical msgid and msgctxt sets.
The other 4 are statements with no effect. AMSItem.cpp:117 and :174
construct and drop a wxColour(255, 255, 255); AMS_TRAY_DEFAULT_COL is
that colour, and the line above already assigns it. UpgradePanel.cpp:865
reads a member and drops it.
wgtDeviceNozzleSelect.cpp:269 writes
if (item; auto ptr = m_nozzle_rack.lock()), which puts the null check in
the init-statement position where its value is discarded, so the check
never runs, and sGetNozzlePosId then dereferences item. Nothing reaches
that today, because the only sender of the event sets itself as the
event object and the dynamic_cast always succeeds. The check now runs.
git config wrote core.autocrlf into the repository git init creates in the
extracted CPython source. Nothing outside deps/build reads that repository, so
the setting was already contained.
-c applies the override to the one invocation instead, so no repository config is
written at all. It cannot reuse PATCH_CMD, so the shared flags are spelled out here.
Port of snaporca da8d011b87; parity holds (DesignPanel.cpp still exactly 32 divergent
lines). Verified independently on this fork's own rig: full ladder 126/126 against
BuildID 96c697a3, built from this tree.
Reviewing the DistanceX/Y fix for OTHER members of its class found three more live defects
on the constrain toolbar. All four share one root: a branch assumes every picked entity has
two endpoints, and the solver's refusal to resolve a role it cannot find is silent.
COINCIDENT had the identical closest-pair walk over {P0,p0},{P1,p1}. For two Points the
phantom (0,0) pair sits at distance 0, which is the smallest distance there is, so it
ALWAYS won: ptOf(Point,P1) -> 0, ref_ok fails (SketchSolver.cpp:185), constraint dropped.
Not sometimes -- every press.
HORIZONTAL/VERTICAL hardcoded ra=P0, rb=P1 with no type check. With a Point picked the
constraint is dropped by the same mechanism but still STORED: constraints goes 0 -> 1 after
the commit and nothing moves, so the Constraints list shows a dimension that can never do
anything. Worse than refusing -- the panel claims the sketch is constrained when it is not.
ANGLE computed p1-p0 on whatever was picked. On a circle that is (0,0)-centre, so two
circles pre-filled the field with the angle between their centre POSITION VECTORS (178.83
deg for two on the x axis), and accepting it emits SLVS_C_ANGLE on two circle prims.
Both branches now refuse with a message. entity_ends()/closest_ends() are file-scope and
shared by Coincident and DistanceX/Y, so there is one implementation instead of two that
drift.
Two smaller findings from the same review: infer_auto_constraints' roles_of omitted
EllipseArc while heal_coincidences' identical copy has it; and set_point(Circle, Center)
wrote e.center and not e.p0, breaking the "p0 mirrors centre" invariant for the duration of
a live drag.
New rungs D8 and D9, both RED against the shipped binary and green here.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MrMzTpAf78U4NG2M8jfvHY
Format/3mf.cpp also saved and loaded it, but nothing calls its store_3mf and
its load_3mf only sees files fingerprinted as PrusaSlicer's, which never carry
a recipe. Its round-trip test only exercised that dead loop. The BBS backend,
which every save and load goes through, is untouched.
The Design tab's viewport is the fourth GLCanvas3D on the shared GL context and
the only one the plater does not own, so unbind_canvas_event_handlers() and
reset_canvas_volumes() never reached it — the macOS Command+Q and Debian cases
those calls exist for. Its frame-level handlers become members so they can be
unbound.
The bind sat above GLCanvas3D::bind_event_handlers(), and on_size never Skips,
so wx's reverse-order dispatch stopped before it and the handler never ran.
Port of snaporca b3221f8a12; this is the fork the fault surfaced on.
The perpendicular rung drew its two lines 93.5 degrees apart and then asserted they did
NOT start perpendicular. On this rig, whose camera maps the same click a pixel differently,
they arrived at exactly 90.000000 -- inference had already done the job the rung exists to
test, so the precondition failed while every later check passed. Held on the other fork and
failed here from identical source: the rung depended on where a click happened to land, not
on the app.
The second point now starts the pair 56 degrees off, well outside any snap tolerance, so
the button has real work to do.
That immediately exposed a second, milder fault in the same rung. From a 51 degree start
the LIVE solve converges to its own tolerance and lands at 89.999999991; the old 1e-9
assertion held only because the correction used to be tiny -- it was measuring how little
work the solver had to do, not whether the lines came out perpendicular. It is 1e-6 degrees
now, which is 1.7e-8 radians. The round-trip check still demands exactly 90 and gets it,
because the committed feature re-solves from scratch.
Full ladder 118/118 on BOTH rigs after this, each driving its own fork's binary. This fork
had never had a green gesture ladder before today (snaporca-eoj1).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MrMzTpAf78U4NG2M8jfvHY
Four of this fork's five absolute chrome coordinates were shifted by CHROME_DY when the
ladder was first brought up here (DESIGN_TAB, CONSTRUCTION_CHECKBOX, CON_BTN_Y,
CONFIRM_BTN). TREE_ROW0 was not, because it is declared above the CHROME_DY block and was
simply never in view.
The unshifted click lands 26 px below the first tree row, just past its 23 px height, so
the row is never selected and Delete does nothing. reset_document then spends 40 rounds on
it and dies with "could not empty the feature tree" — a message that names the feature
tree, which is not the fault. The same 26 px is why confirm_and_reopen's double-click did
not reopen the sketch, which surfaced as "sketch_describe: no sketch is open" three frames
away from the cause.
Measured, not inferred: the Sketch1 row centre reads y=241 on the rig at 1920x1080 with
the window at (0,0), against the constant's 215. CONFIRM_BTN was checked in the same pass
from a screenshot taken in CONSTRAIN mode and is correct at (1751, 101).
With this, the four new constraint rungs hold 20/20 on this fork's rig, driving the binary
built from 648b930e75 (BuildID 56417445) — so the DistanceX/Y fix ported here is now
exercised, not merely parity-checked.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MrMzTpAf78U4NG2M8jfvHY
Port of snaporca 2951e3c60b; parity holds (17 identical, DesignPanel.cpp still exactly 32
divergent lines, so the hunk landed on the right side of the DropDown divergence).
The sketch-constraint epic added six toolbar buttons and covered all six with kernel
tests. Not one of them was ever clicked. The gesture ladder only pressed 'perpendicular'
and 'equal' -- and CON_BTN, which locates buttons by index, was silently wrong for every
entry past index 5 for the whole epic. The untested half of the toolbar was exactly the
broken half (snaporca-rqsy).
Four rungs now drive them: D4 Equal on two circles (must mean equal RADIUS, not the
equal-length no-op the epic fixed), D5 Collinear on two oblique lines, D6 a horizontal
distance, D7 symmetric about the implicit vertical axis. Full ladder 118/118 on snaporca;
this fork's rig has not been rebuilt against the change yet, so here it is reviewed,
parity-checked and NOT exercised.
D6 found a shipped defect. apply_entity_constraint enumerated {P0,p0},{P1,p1} for BOTH
entities regardless of type, but a Point's p1 is unused and reads (0,0), as does a
Circle's. The closest-pair search then picked those two phantom origins, distance 0: the
field opened pre-filled 0.00 and the solver dropped the constraint, because ptOf(Point,P1)
resolves to no handle. Nothing errored -- the dimension simply did nothing. ends_of() now
enumerates only the roles an entity actually exposes, and the pair with no point at all is
refused with a message instead of a silent no-op.
Five kernel tests, a 7/7 ladder, a review and a fork port all passed over this, because
every one of them exercises the kernel, where the geometry was always right.
Two rig faults fixed in the same pass, both of which produce a green-looking session that
tests nothing: start-headless-gui.sh never exported SNAPORCA_MCP or SNAPORCA_KEYTRACE, so
a freshly launched rig comes up healthy and every ladder dies on "Connection refused"; and
it never dismissed the "Restore" dialog a killed session leaves behind, which grabs every
synthetic click afterwards.
The value field also takes no keyboard focus from the WM -- typed digits go to the canvas
and Return commits the pre-filled number (typed 40, got 54.94). focus_field() finds it as
its own top-level window and clicks it first. The no-op tolerance is now 5e-3, the field's
own two-decimal display resolution, not 1e-6.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MrMzTpAf78U4NG2M8jfvHY
These dialogs treated a filament with no compatible_printers as compatible with
nothing, while the rest of the app treats it as compatible with everything, so
the entire Orca Filament Library was missing from the AMS material and
calibration filament lists. They now resolve compatibility the same way the
plater does, and a vendor profile still supersedes the library generic of the
same name.
This fork had never been gated end to end. Five separate things stopped it, none
of them a defect in the CAD code itself, and each failure named the wrong
subsystem — which is why they survived.
1. run-all-checks.sh invoked docs/ux/mockups/gen_offer_table.py. The design docs
moved to docs/CAD/ (bbd1989e1e) and this path did not follow, so the rung
failed on a missing file.
2. gen_offer_table.py then resolved REPO one dirname short, because it now sits a
level deeper. OUT pointed at docs/src/.../DesignOffer.hpp, which does not
exist, so --check diffed the generated table against an EMPTY file and
reported all 189 lines as a difference.
3. DISPLAY was never passed into the container. The check scripts fall back to
":10", which is the other fork's rig; this one's Xvfb is :11. Symptom:
"FATAL no app window on :10", which reads like a dead app.
4. Every absolute chrome coordinate was written in the Snapmaker fork's layout.
This fork keeps mainline's top row (File / save / undo / redo / Calibration
with the title), so the whole chrome sits 26 px lower. At the unshifted y the
Design-tab click landed in the toolbar and the app stayed on the Home page,
reported as "no sketch opened after plane click + Shift+S"; the unshifted
Construction checkbox reported "0 construction axis". The three constants now
derive from CHROME_DY. Canvas coordinates were never affected -- clickmm()
computes them from live canvas geometry -- which is why dozens of geometric
properties passed exactly on a GUI that had never been driven.
5. CON_BTN was stale for every index after 5, from the sketch epic's six new
buttons. Fixed in both forks; see the companion commit on snaporca.
pdftocairo was also missing from the rig image (installed there, not a repo
change), without which every corpus sheet threw.
RESULT: offer-table, kernel, engine, corpus, corpus-scale and offer all hold.
The gesture ladder now reaches D2 and applies Equal length through the Constrain
toolbar, both sides landing at 99.928133658; it then fails re-entering the sketch
after commit, filed as snaporca-eoj1 with the evidence and the next measurement
to take. Kernel here is 7701 assertions / 270 cases.
# Description
This is an initial draft of the plugin audit workflow.
It focuses on the user experience and developer-facing permission
workflow. It does not yet include the complete implementation of every
operation that should be audited, such as the full filesystem,
networking, and process-spawning event coverage.
## User workflow
When a plugin is loaded:
1. The plugin’s register_capabilities() function is executed.
2. The plugin declares the permissions it requires.
3. OrcaSlicer displays a permission dialog listing the requested
resources.
4. If the user grants access:
- The permission is persisted in the plugin’s .install_state.json.
- Capability registration continues.
- The plugin is materialized and loaded.
5. If the user denies access:
- Plugin loading fails before capabilities are materialized.
- on_load() is not called.
- The plugin’s install state is marked with "enabled": false to prevent
repeated automatic load attempts.
At runtime, if a plugin accesses a resource that was not approved during
loading, the audit hook displays another permission dialog. For
filesystem requests, the dialog identifies the requested filepath.
- Granting access persists the permission and allows the operation.
- Denying access raises a Python PermissionError.
- The error propagates to the host, which records the failure and
unloads the plugin.
Host-side traceback logging is performed outside the plugin audit
context so that logging does not generate additional permission dialogs.
## Developer-facing API
Plugins can declare filesystem read permissions through the new API:
```python
import orca
AUDIT_PATH = __file__
@orca.plugin
class ExamplePackage(orca.base):
def register_capabilities(self):
orca.request_permissions(
fs_read=[AUDIT_PATH],
)
orca.register_capability(ExampleCapability)
```
orca.request_permissions() must be called from register_capabilities()
while the plugin is being loaded.
Currently supported permission:
orca.request_permissions(fs_read=[...])
The paths should be explicit filesystem paths that the plugin intends to
read. The host deduplicates repeated paths, presents the request after
registration completes, and persists granted paths in the plugin
install-state sidecar. This API is still experimental, and is by no
means the final implementation.
Support for additional permission categories, including filesystem write
access, networking, and process spawning, is reserved for subsequent
work.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
<img width="869" height="799" alt="image"
src="https://github.com/user-attachments/assets/8a5903cc-0cbb-45a8-b88a-706d6cba790f"
/>
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
This fork's kernel suite has never run. scripts/CAD/run-kernel-tests.sh died at
CMake CONFIGURE time on find_package(assimp REQUIRED), before a single source
file compiled, so every kernel change ported here was parity-checked against
snaporca and never independently tested (snaporca-w80c).
WHY IT WAS MISSING. OrcaSlicer mainline gained assimp (glTF/GLB/FBX import for
texture-to-colour) after the orcacad-deps image was baked: the image's deps/ tree
has no Assimp directory at all and nothing named assimp anywhere in it. On the
host, deps/build/dep_Assimp-prefix carries only `patch` and `update` stamps -- no
build, no install -- so the dependency was fetched and then never built, inside
the image or out of it. The Snapmaker fork never hit this because its base
requires neither assimp nor OpenCV.
WHY A LAYER. A full deps rebuild is hours and would rewrite artifacts that
currently work; this adds the one missing package on top. It is a Dockerfile
rather than a `docker commit` so that what was done stays reviewable and
repeatable instead of being an undocumented image mutation.
The flags are the project's own recipe (deps/Assimp/Assimp.cmake) plus the
standard superbuild arguments from orcaslicer_add_cmake_project
(deps/CMakeLists.txt:158) and DEP_CMAKE_OPTS (deps/deps-linux.cmake). The file
says to keep them in step with that recipe: it stands in for the superbuild, it
is not a separate opinion about how to build assimp.
The tarball's SHA256 was checked against the recipe's URL_HASH before this was
written and is re-checked inside the build, and the build asserts the installed
cmake config exists rather than trusting an exit code. OpenCV was confirmed
already present, so it is not a second wall behind this one.
RESULT, and it is the point: orca_cad kernel now runs and is GREEN at 7701
assertions / 270 cases. snaporca is 7700 / 270 -- same cases, one more assertion
here, which is the tolerated test_caddocument.cpp divergence. The "this fork's
kernel suite cannot run" caveat carried by the five commits of the sketch
constraint epic no longer applies.
Port of snaporca e635627b81. Parity OK: 17 files identical, 8 diverging at their
expected counts.
The last reference an industrial sketcher offers that this one did not: Onshape's
Use, SolidWorks' Convert Entities. Project already turned a body's 3D edges into
2D Lines, Circles and Arcs on a plane, but the result landed in its OWN feature,
so while drawing in one sketch you could not borrow an existing body's edge and
constrain to it.
No new geometry code: Project's per-edge conversion loop is factored into
project_edges_to_entities() and called from a second entry point that appends
into an EXISTING sketch with construction = true. The loop appears once now,
not twice.
Construction is what makes it cheap and safe: SketchEngine already skips
construction entities when building wires, so the references guide without being
built, and being otherwise ordinary entities every constraint from this epic --
Collinear, EqualRadius, the axis-projected distances, PointOnLine, Symmetric --
works against them for free.
Part of this refactors working code, so Project's behaviour identity is the
invariant; the existing [CadDocument][project] cases guard it and a new case
asserts a Project feature still emits construction == false.
project_edges_into_sketch returns the number of entities appended, or -1 on a bad
reference rather than throwing.
VERIFICATION LIMIT, as with the previous four commits: this fork's kernel suite
still cannot run (find_package(assimp) at configure time, snaporca-w80c). Shared
sources are byte-identical to snaporca's, where kernel is 7700 assertions / 270
cases and ALL LADDERS HELD 7/7.
Port of snaporca 2d36d28770. Parity OK: 17 files identical, 8 diverging at their
expected counts.
infer_axis_constraint returned only Horizontal or Vertical. On the
CAD-1000-hours corpus the top two transitions are sketch_dim -> sketch_draw
(5896) and back (5756): the signature of geometry that does not self-constrain
as it is drawn.
Every rule requires the relation to be ALREADY TRUE within tolerance, so nothing
the user drew is moved; parallel/perpendicular and tangent additionally require a
shared endpoint.
TWO LIMITS THE CORPUS RUNG FORCED, neither visible to the unit tests:
1. At most ONE constraint per rule per new entity, not one per PAIR, and no
one-at-a-time fallback for the relations batch. EqualRadius has no locality
restriction, so 200 equal holes produced ~20000 candidates; the rejected batch
then cost a solve per constraint and pinned the app at 95% of a core with the
MCP socket unresponsive.
2. Relations only for gesture-sized batches. "A scripted add is not a drawn
gesture" is already this file's rule at its bulk call site (snaporca-8xg1), and
EqualRadius also couples geometrically distant entities, merging independent
connected components and defeating the partitioning that makes large sketches
solvable (snaporca-yww4). With the cap alone geometry stayed correct (32/32
sheets clean) but seven of the largest timed out, including MPD681 -- the sheet
that call site's own comment names.
Also fixes the tolerance leak behind 2: the bulk path asks for exact inference
with ang_tol_rad = 0 but len_tol_frac kept its 0.01 default.
ALSO independent of this feature: run-kernel-tests.sh defaulted to
TAGS=[CadDocument] while four CAD test files carry their own tags and nothing
selected them (2624 assertions / 206 cases reported, 7648 / 264 actual). All 58
dark cases were passing; the coverage was never exercised.
VERIFICATION LIMIT, as with the previous three commits: this fork's kernel suite
still cannot run (find_package(assimp) at configure time, snaporca-w80c). Shared
sources are byte-identical to snaporca's, where kernel is 7651 assertions / 265
cases and ALL LADDERS HELD 7/7.
Port of snaporca 5b1294de59. Parity OK: 17 files identical, 8 diverging at their
expected counts.
Every industrial sketcher gives you the origin and the axes as references. Here
the origin was only a SNAP target and the axes did not exist, so Symmetric needed
a third picked ENTITY as its mirror axis: symmetry about the sketch's vertical
axis first required drawing a construction line.
Every constraint reference resolves through four lambdas in the solver
(valid/ptOf/primOf/coordOf), so teaching those about three negative sentinel
indices makes the origin and both axes available to EVERY constraint type at
once. No new SketchEntity type, no serialization change; -1 still means "unset".
The references live in G_FIXED and add no degrees of freedom, which a test
asserts via the reported DoF.
SymmetricAboutY / SymmetricAboutX are two buttons that need no third pick and no
construction line. Making the axes clickable in the viewport is deliberately left
out: that is canvas hit-testing work with its own risks.
Recorded in the tests because it will catch the next person: sys.dragged[] is
populated only during a drag, so a plain sketch_solve of an UNDER-constrained
system may move any free parameter -- solvespace runs Newton, it does not
minimise movement. PointOnLine onto an axis is one equation in two unknowns and
the point legitimately slides along it. Those tests pin the free direction
instead of asserting the other coordinate is untouched.
VERIFICATION LIMIT, as with the previous two commits: this fork's kernel suite
still cannot run (find_package(assimp) fails at configure, snaporca-w80c). The
shared sources are byte-identical to snaporca's, where kernel is 2624 assertions
/ 206 cases and ALL LADDERS HELD across all seven rungs.
Port of snaporca 9fa304c77a. Parity OK: 17 files identical, 8 diverging at their
expected counts.
The everyday dimension in SolidWorks and Onshape, and this kernel had no form of
it. Distance constrains the straight-line gap; LockX/LockY pin one point's
ABSOLUTE coordinate. Neither relates two points along an axis.
DistanceX/DistanceY emit SLVS_C_PROJ_PT_DISTANCE against two unit direction
lines built in the solver's G_FIXED group, so they add no degrees of freedom.
THE DIRECTION IS SIGNED, and getting it backwards is silent. libslvs defines a
LINE_SEGMENT's direction as point[0] - point[1] (entity.cpp) and
PROJ_PT_DISTANCE constrains (pB - pA).dot(dir) (constrainteq.cpp:234), so the
reference lines are built head-first to mean +X and +Y.
The same signedness was a real defect in the GUI: the inline editor was
pre-filled with |delta|, so when the closest endpoint pair ran right-to-left,
opening the dimension and accepting the number shown would flip the point to the
other side of its anchor. Opening a dimension and accepting its own value must
be a no-op. The refs are now ordered so the shown value is positive.
On the CAD-1000-hours corpus, dimensioning and constraining is 31.9% of all
observed CAD time -- the largest single class, 7.6x feature operations. This is
the item in the constraint epic that lands most directly on it.
VERIFICATION LIMIT, as with the previous commit: this fork's kernel suite still
cannot run (find_package(assimp) fails at configure time, snaporca-w80c). The
shared sources are byte-identical to snaporca's, where kernel is 2603 assertions
/ 200 cases and ALL LADDERS HELD across all seven rungs.
Port of snaporca 9ec6405e2d. Parity OK: 17 files identical, 8 diverging at their
expected counts (DesignPanel.cpp 32, test_slvs_constraints.cpp 3).
Measured on the CAD-1000-hours corpus: 51.5% of observed CAD time is 2D sketch
work, and dimensioning/constraining alone is 31.9% -- the largest single class.
Two constraints every industrial sketcher has were missing here.
EqualRadius fixes a dead end rather than adding a feature. Picking two circles
and pressing Equal emitted EqualLength, which maps to SLVS_C_EQUAL_LENGTH_LINES
and constrains nothing on a curve: a silent no-op with no error. Equal is now
one button with two meanings, as in Onshape and SolidWorks.
Collinear emits PARALLEL plus PT_LINE_DISTANCE=0 rather than PT_ON_LINE, whose
internal valP param this libslvs port leaves at 0, drifting an already-collinear
pair.
Both types are appended at the END of SketchConstraintType: cereal serializes it
positionally, so inserting elsewhere reinterprets every saved recipe.
VERIFICATION LIMIT, stated rather than implied: this fork's kernel suite could
NOT be run. scripts/CAD/run-kernel-tests.sh fails at CMake configure time on
find_package(assimp), before any source compiles -- a pre-existing deps gap
(snaporca-w80c), not this change. The shared sources are byte-identical to
snaporca's, where the full gate passed: kernel 2588/195 and ALL LADDERS HELD
across all seven rungs.
Also fixes two defects in this fork's scripts/CAD/run-all-checks.sh:
- `cd $(dirname $0)/..` landed in scripts/ instead of the repo root, so every
rung looked for itself under scripts/scripts/. Broken since the script moved
into scripts/CAD/; the three sibling scripts were fixed then and this was
missed, so the gate has not run since.
- C defaulted to snaporca-gui, the OTHER fork's rig container, so this fork's
gate would drive snaporca's app and report green about the wrong binary.
run-kernel-tests.sh:31 documents the identical defect being fixed once
already for the build volume; this is the third instance.
* Add ffmepg dep
* NEW: reimpl wxMediaCtrl from ffmpeg
Jira: none
Change-Id: I46a47118a7649b2a50fcce8911e2888342ef25de
(cherry picked from commit d6c7f08769c8cfdbbf0e80ad280c9b3408a3c27d)
(cherry picked from commit 94d91be60bfe9bbbcdd21f85b46abc3faf126f17)
* FIX: reset bambu lib after restart network plugin
Change-Id: I4a3a4b7420745835ca3fa00c6edebe9d8d98cbf6
Jira: STUDIO-7571
(cherry picked from commit 28d9c6743fae80bfd40e4ee391e30d62cb16d4ab)
* FIX: ffmpeg decoder memory leak
Change-Id: I997572b5730618a969959f9b24c405d80fa9f83c
Jira: STUDIO-7597
(cherry picked from commit 342cea29bd9593fa89cbb33caff58055b46ebeec)
* FIX: install ffmpeg symbolic sos
Change-Id: Ia4a45182cefcf62a7a4b4a5c89c92251609c5a68
Jira: none
(cherry picked from commit b7f8fa1efdbe0ac2cc896ca24f063f5894fe9f90)
* FIX: ffmpeg swscale & frame_size
Change-Id: I9f4cb8c739b726f7e5cdbe0df7ed06b2eb2154d5
Jira: STUDIO-7624
(cherry picked from commit 5a2c75d835fb437667b590a803eef148baa30875)
* FIX: wxMediaCtrl3 idle image & center pos
Change-Id: Ib9652573e31bfd6229f174c0a1388942d9d98822
Jira: STUDIO-7633
(cherry picked from commit d51247c46e26460b151de79c598d81151280e79c)
* FIX: AVVideoDecoder sws_ctx_ == nullptr on zero size
Change-Id: I9698354bb1f341e276ec9780d4ef4fcd9f8a1028
Jira: STUDIO-7706
(cherry picked from commit ff622e25026a8471c39eb308cf5b115c4a9d84aa)
* fix:cannot open shared object file on linux
Change-Id: Ica66500506cfe8932eac3ae0a58fb7ff30d1da9b
jira:none
(cherry picked from commit febd1aeb4d453bc96571fa5e5727e9e10046cb80)
(cherry picked from commit 5ad579f929154779abd84b01438fd235c647dbf5)
* NEW:add ffmepg build Cmake
buildLinuxImage add ffmpeg so file
jira:nojira
Change-Id: I3e1be53aa58a179b8d9ae048ed7538de3ae8d111
(cherry picked from commit 2d70a1bcb6a5ba601525b08a38e7610f018fe106)
* FIX: ffmpeg cmake install error
jira:nojira
Change-Id: I74cc0f7c86b5364e55cad2af2bd9a82306ee6864
(cherry picked from commit 805df79e3bb044dac29ec1c06736751ccf3675f9)
* FIX: decode video to wxImage on Linux
Change-Id: I5e332a1b0622b3dfc70ac5c4c3bfa62b3411ebdc
Jira: none
(cherry picked from commit c787ba921a31f259e8eb23fd59f178e96279caf9)
* FIX: wxMediaCtrl3 enter Stopped state soon
Change-Id: I120e9d4b9f85599a184650d1d95fe2bec42af171
Jira: STUDIO-8280
(cherry picked from commit 7648d96305d510b9e97f22124961de5115cde830)
* FIX: reset decode buffer zero when scale width changed
Change-Id: Iaa2f99111dd5f7228b7b25e1be0a8cbdbfe982a6
Jira: STUDIO-8422
(cherry picked from commit 659ebc7d07a8f6045ba5443141b44277d7257cec)
* slic3r: Fix missing declarations in wxMediaCtrl3.h
src/slic3r/GUI/wxMediaCtrl3.h:80:10: error: ‘condition_variable’ in namespace ‘std’ does not name a type
80 | std::condition_variable m_cond;
| ^~~~~~~~~~~~~~~~~~
src/slic3r/GUI/wxMediaCtrl3.h:27:1: note: ‘std::condition_variable’ is defined in header ‘<condition_variable>’; did you forget to ‘#include <condition_variable>’?
26 | #include "Printer/BambuTunnel.h"
+++ |+#include <condition_variable>
27 |
src/slic3r/GUI/wxMediaCtrl3.h:81:10: error: ‘thread’ in namespace ‘std’ does not name a type
81 | std::thread m_thread;
| ^~~~~~
src/slic3r/GUI/wxMediaCtrl3.h:27:1: note: ‘std::thread’ is defined in header ‘<thread>’; did you forget to ‘#include <thread>’?
26 | #include "Printer/BambuTunnel.h"
+++ |+#include <thread>
27 |
In file included from src/slic3r/GUI/MediaPlayCtrl.h:17,
from src/slic3r/GUI/MediaPlayCtrl.cpp:1:
src/slic3r/GUI/wxMediaCtrl3.h:77:13: error: field ‘m_frame’ has incomplete type ‘wxImage’
77 | wxImage m_frame;
| ^~~~~~~
(cherry picked from commit 727a73333bd67acf5ff2b1c51ff284c2bacdb413)
* slic3r: Fix missing includes in AVVideoDecoder
In file included from src/slic3r/GUI/AVVideoDecoder.cpp:1:
src/slic3r/GUI/AVVideoDecoder.hpp:28:20: error: ‘wxImage’ has not been declared
28 | bool toWxImage(wxImage &image, wxSize const &size);
| ^~~~~~~
src/slic3r/GUI/AVVideoDecoder.hpp:28:36: error: ‘wxSize’ has not been declared
28 | bool toWxImage(wxImage &image, wxSize const &size);
| ^~~~~~
src/slic3r/GUI/AVVideoDecoder.hpp:38:10: error: ‘vector’ in namespace ‘std’ does not name a template type
38 | std::vector<uint8_t> bits_;
| ^~~~~~
src/slic3r/GUI/AVVideoDecoder.hpp:9:1: note: ‘std::vector’ is defined in header ‘<vector>’; did you forget to ‘#include <vector>’?
8 | #include <libswscale/swscale.h>
+++ |+#include <vector>
9 | }
src/slic3r/GUI/AVVideoDecoder.cpp:145:89: error: invalid use of incomplete type ‘class wxBitmap’
145 | bitmap = wxBitmap((char const *) bits_.data(), size.GetWidth(), size.GetHeight(), 32);
| ^
(cherry picked from commit 781ce14e061366da64fdc2d0d592fa35ee57e67e)
* slic3r: Fix missing includes in wxMediaCtrl2
src/slic3r/GUI/wxMediaCtrl2.cpp: In lambda function:
src/slic3r/GUI/wxMediaCtrl2.cpp:170:13: error: ‘wxMessageBox’ was not declared in this scope; did you mean ‘wxInfoMessageBox’?
170 | wxMessageBox(_L("Your system is missing H.264 codecs for GStreamer, which are required to play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-libav packages, then restart Bambu Studio?)"), _L("Error"), wxOK);
| ^~~~~~~~~~~~
| wxInfoMessageBox
src/slic3r/GUI/wxMediaCtrl2.cpp: In member function ‘void wxMediaCtrl2::Load(wxURI)’:
src/slic3r/GUI/wxMediaCtrl2.cpp:179:5: error: ‘wxLog’ has not been declared
179 | wxLog::EnableLogging(false);
| ^~~~~
(cherry picked from commit 73908d38d8b1f7c8dcae92d55711bc08cbfff23c)
* slic3r: Fix missing wxPaintDC declaration
src/slic3r/GUI/wxMediaCtrl3.cpp: In member function ‘void wxMediaCtrl3::paintEvent(wxPaintEvent&)’:
src/slic3r/GUI/wxMediaCtrl3.cpp:121:5: error: ‘wxPaintDC’ was not declared in this scope; did you mean ‘wxPoint’?
121 | wxPaintDC dc(this);
| ^~~~~~~~~
| wxPoint
(cherry picked from commit 9ab5009235d212699f91e01d7f930f92849ed1e3)
* slic3r: Fix missing BOOST_LOG_TRIVIAL declaration
src/slic3r/GUI/wxMediaCtrl3.cpp:181:23: error: ‘info’ was not declared in this scope
181 | BOOST_LOG_TRIVIAL(info) << msg.ToUTF8().data();
| ^~~~
src/slic3r/GUI/wxMediaCtrl3.cpp:181:5: error: ‘BOOST_LOG_TRIVIAL’ was not declared in this scope
181 | BOOST_LOG_TRIVIAL(info) << msg.ToUTF8().data();
| ^~~~~~~~~~~~~~~~~
(cherry picked from commit c5c41e20ca2fc7f3b53a4c769961f73df6992008)
* FIX: wxMediaCtrl3 zero size crash
Change-Id: I16a3f7b3afe142bb957a1740b8e8c9820c92b349
Jira: STUDIO-8522
(cherry picked from commit 8cdaea1162ccbcc0bd03ecd99346f3b9cf52cf64)
* FIX: TabCtrl button margin
Change-Id: If8b05a4ef9efb8b57989ee1de6543631e5a3cf90
Jira: STUDIO-8265
(cherry picked from commit 1c5e65707109ad0582b6442cf8e515344f799c27)
* ENH: wxMediaCtrl3 display video frame at pts
Change-Id: I8847236d2307101e5f2befc6477cd20b3691841c
Jira: none
(cherry picked from commit 05328da4612c11d50f6fd90e872b97f5f8f46b1d)
* Fix: fix memory leak caused by ffmpeg decoding
Change-Id: I162ad4ea8d4601c1ffe17a65f292566c9dea6f0b
jira: no-jira
(cherry picked from commit eb20d03186c86b7398b97e3bae0a3c7a7b81c58c)
* ENH: update some missing codes
jira: no-jira
Change-Id: Icb2da53911430ac144b0fb601637a7ad31e7e8db
(cherry picked from commit 13b4213f8a24c76c16e49daf905fa29c0f646a5a)
* Fix build
* Update idle image
* Attempt to fix Windows CI build
* FIX: GTK video window resize ran in a free function without member access
wxMediaCtrl_OnSize referenced wxMediaCtrl2's private m_gtk_video_window,
which does not compile on Linux/GTK. Move the resizing into
wxMediaCtrl2::DoSetSize where the member is in scope.
* Install required tools for Linux
* Install required tools for macOS
* Add ffmpeg to flatpak
* Fix Linux build
* Try fix appimage build
* Fix Linux AppImage bundling of deps-built shared libraries
The AppImage dependency closure resolves each bundled ELF's DT_NEEDED
entries with plain ldd, which cannot resolve the deps-built FFmpeg stack
(libavcodec/libavutil/libswscale) once it is copied into the bundle:
those libs are not installed in any standard loader path and carry no
RUNPATH of their own, so ldd reports the siblings as missing and the
build aborts. Extend the loader path with the bundle directory plus the
source directories of already-bundled files (mirroring
scripts/check_appimage_libs.sh), and key the dedup set on the bundled
file path instead of the source path so dependencies resolved from the
bundle directory are not copied onto themselves.
Co-Authored-By: Claude <noreply@anthropic.com>
* Attempt to fix Linux unit test
* Fix Linux unit tests loading deps-built FFmpeg libraries
The test executables that link libslic3r_gui (which links PkgConfig::LIBAV)
have a load-time dependency on the deps-built FFmpeg shared libraries. The CI
unit-test runner only receives the tests artifact, so those libraries were
unresolvable there (Ubuntu 24.04 ships libavcodec.so.60, not .61). Copy the
libraries next to each affected test executable and give it an $ORIGIN rpath,
mirroring the Windows branch that copies DLLs next to every test executable.
orcaslicer_copy_sos now places the copies in the per-config output directory
for multi-config generators, like orcaslicer_copy_dlls does.
Co-Authored-By: Claude <noreply@anthropic.com>
* Add design doc for macOS FFmpeg player
Co-Authored-By: Claude <noreply@anthropic.com>
* Add implementation plan for macOS FFmpeg player
Co-Authored-By: Claude <noreply@anthropic.com>
* feat: use FFmpeg media player on macOS with static FFmpeg
* build: build static-only FFmpeg for macOS deps
Co-Authored-By: Claude <noreply@anthropic.com>
* refactor: remove old BambuPlayer-based media player from macOS
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: add static FFmpeg NOTFOUND guard; drop dead wxMediaCtrl2.h include
* build: drop redundant --enable-shared in FFmpeg deps configure
The literal --enable-shared was always overridden by ${_link_cmd}
(--enable-static --disable-shared on Apple, --enable-shared elsewhere)
and FFmpeg configure processes these flags in order, last one wins.
Remove it and the stale comment documenting the workaround.
Co-Authored-By: Claude <noreply@anthropic.com>
* refactor: remove dead wxMediaCtrl2 player
wxMediaCtrl2 was never instantiated on any platform (USE_WX_MEDIA_CTRL_2
is 0 everywhere); wxMediaCtrl3 replaced it. Delete wxMediaCtrl2.cpp/h,
drop them from the Win/Linux source list and the gettext list.txt, and
collapse the preprocessor-dead #if USE_WX_MEDIA_CTRL_2 gate in
MediaPlayCtrl.h.
Co-Authored-By: Claude <noreply@anthropic.com>
* refactor: remove dead GStreamer bambusrc plugin and its build dep
gstbambusrc was the GStreamer source element for the old wxMediaCtrl2
Wayland player, its only consumer (deleted in the previous commit).
The new FFmpeg player handles bambu:/// URIs through the Bambu C API
instead. Drop the plugin and the gstreamer-1.0 / gstreamer-base-1.0
REQUIRED pkg-config dependencies that existed solely for it.
Co-Authored-By: Claude <noreply@anthropic.com>
* build: move FFmpeg media player sources to the common GUI list
wxMediaCtrl3 and AVVideoDecoder are platform-neutral C++ compiled on
all three platforms, so list them once in the common SLIC3R_GUI_SOURCES
instead of duplicating them in the APPLE and non-APPLE branches. The
else() branch is now empty and drops out entirely.
Co-Authored-By: Claude <noreply@anthropic.com>
* deps: disable FFmpeg VideoToolbox/AudioToolbox HW-accel on macOS
The static libavcodec.a/avutil.a compiled the auto-detected
videotoolbox/audiotoolbox objects, which reference VideoToolbox
framework symbols (_VTDecompressionSession*). The app link line
happened to satisfy them transitively, but the orca_stubgen module
link (CI-only) failed with undefined symbols. The player decodes in
software (swscale), so disable both HW-accel paths to keep the
static libs self-contained.
Co-Authored-By: Claude <noreply@anthropic.com>
* Copy the decoded frame instead of aliasing the decoder's buffer
wxImage with static_data set stores the pointer and never copies it, so the
frame handed to wxMediaCtrl3 aliased AVVideoDecoder::bits_. That buffer is
rewritten by the next sws_scale with the mutex released, reallocated by
bits_.resize() when the window grows, and freed outright when the decoder
leaves PlayThread's loop body at end of stream, all while the GUI thread may
be painting from it.
Windows is unaffected either way, since toWxBitmap already copies the bits
into GDI.
---------
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: BBL\chuan.he <chuan.he@bambulab.com>
Co-authored-by: MackBambu <yongfang.bian@bambulab.com>
Co-authored-by: Bastien Nocera <hadess@hadess.net>
Co-authored-by: chao.zhang <chao.zhang@bambulab.com>
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
wxImage with static_data set stores the pointer and never copies it, so the
frame handed to wxMediaCtrl3 aliased AVVideoDecoder::bits_. That buffer is
rewritten by the next sws_scale with the mutex released, reallocated by
bits_.resize() when the window grows, and freed outright when the decoder
leaves PlayThread's loop body at end of stream, all while the GUI thread may
be painting from it.
Windows is unaffected either way, since toWxBitmap already copies the bits
into GDI.
It was already public and used elsewhere, so the new get_background_process()
and its duplicate forward declaration were redundant; Plater.hpp is now untouched.
exussum12 on PR #15238: "Esc hardly ever works". He was right, and the word
that matters is "hardly" — it works while you are mid-entity and stops working
the moment you finish one.
The branch asked whether a DRAW TOOL was armed, not whether a SKETCH SESSION
was open:
if (key == WXK_ESCAPE && m_viewport && m_viewport->is_sketching())
is_sketching() is DesignSketchTool::is_active(), true only between arming a
tool and finishing with it. Commit an entity and you are left at
ui_mode=Sketch with no tool armed, and from there Esc did nothing at all, no
matter how many times you pressed it — the Cancel button was the only way out.
Reproduced on the headless rig with SNAPORCA_KEYTRACE, which is what settled
it rather than reading: the key ARRIVES and focus is fine,
[KEYTRACE] key=27 ui_mode=1 is_sketching=0 in_text=0 inline_busy=0 focus=w
so this was never the focus problem it looks like from the outside.
Gate on the session instead. request_exit() is already layered — abort the
in-progress entity, else drop the tool to Select, else exit to Feature — so
widening the gate adds no new behaviour, it just lets the ladder be reached
from its own last rung. is_sketching() stays in the condition as an OR, so
nothing about the armed-tool path changes.
This is the same mistake snaporca-0ud fixed thirty lines above in the same
handler, where gating the sketch key MAP on is_sketching() made all 17 keys
read as dead. The comment there now has a sibling.
VERIFIED ON THE RIG, before and after, same sequence (Design > XY > Shift+S >
click canvas): before, two Escapes left the toolbar on SKETCH with zero pixels
changed; after, the toolbar reads FEATURES — one Esc drops the armed tool to
Select, the second exits the session.
Kernel suite green, 2568 assertions in 191 test cases. libslic3r_gui builds
clean on both forks. Parity 17 identical / 8 diverging as expected.
The recipe's 3MF entry moved from Metadata/SnapOrca_cad.bin to
Metadata/orca_cad.bin, so projects saved by earlier builds opened with an
empty Design tab. Both 3MF backends now read either name and write only the
new one; the recipe version advances to 6 to mark the move.
The tab is now gated on a new enable_cad_feature app-config key, off by
default, exposed in Preferences under General > Features. When off, the
page is never created, so the Design-only camera option is hidden too.
Takes effect on restart, like the other feature toggles.
Requested by SoftFever on PR #15238: ten of these had accumulated loose in
scripts/ next to ~20 unrelated upstream ones, with names that only meant
something to whoever wrote them. They now sit in scripts/CAD/, mirroring the
src/libslic3r/CAD/ and src/slic3r/GUI/CAD/ split, and the verb in the name is
the role: build- produces a binary, start- brings something up, run- runs a
suite, check- asserts one thing against a live app.
kernel-test.sh -> CAD/run-kernel-tests.sh
ladder-all.sh -> CAD/run-all-checks.sh
sketch-ladder.py -> CAD/check-sketch-engine.py
ladder-corpus.py -> CAD/check-sketch-engine-corpus.py
gui-ladder.py -> CAD/check-gui-sketching.py
offer-ladder.py -> CAD/check-gui-context-menu.py
mcp-sketch-smoke.py -> CAD/check-mcp-sketch.py
rig-build.sh -> CAD/build-gui.sh
docker-iter-build.sh -> CAD/build-gui-incremental.sh
gui-session.sh -> CAD/start-headless-gui.sh
"Ladder" was the worst of them: it named the shape of the test (rungs of
increasing difficulty) rather than what the test proves, so nothing in the
directory listing told you which one needed a GPU and which was pure kernel.
Every reference rewritten -- the docs, the cross-calls between the scripts,
Dockerfile.deps, and the container-side /OrcaSlicer/scripts paths. The three
shell scripts resolve REPO relative to themselves and now sit one level
deeper, so that walk went from /.. to /../.. . The copies these push into a
container's /tmp were renamed to match, or the container would have kept the
old names alive.
Two runtime paths deliberately NOT renamed. /tmp/orca-rig-build.lock is a
cross-fork contract -- both forks take the same lock so two concurrent builds
serialise instead of OOMing the box, and renaming it on one side silently
removes that guard. /tmp/gui-session.log is a runtime artefact, not a script.
Added scripts/CAD/README.md: what each script proves, what it needs, and the
two constraints that have each cost a session (never build inside the GUI
container; a window manager is required or synthetic keys are ignored).
On CI, which was the other half of the request: the kernel suite is already
there and always has been. The cases are registered in
tests/libslic3r/CMakeLists.txt under if (SLIC3R_CAD), which defaults ON and no
workflow turns off, so they build into libslic3r_tests and run under ctest on
every platform via unit_tests.yml -- like any other unit test, needing no new
job. They have simply never been seen to run, because the workflows on this PR
are still awaiting maintainer approval. run-kernel-tests.sh is the local loop
over the same cases, and it is the only script here CI could run: the other
six need an OpenGL canvas and synthetic input.
Verified: scripts/CAD/run-kernel-tests.sh from its new location, all tests
passed, 2562 assertions in 190 test cases.
Building the Design tab on first use (1750c52211) leaves m_design_panel null
until a human selects the tab. McpControl::handle_on_main refused every verb
while it was null, so start_mcp_control_if_enabled() opened the socket and
then answered "Design panel not ready" to everything — for the whole session
if nobody clicked. That is precisely the headless case the socket exists for:
the click-test rig drives this app over it with no window manager and no user.
MainFrame::ensure_design_panel() now builds the panel on demand and returns
it; the tab activation and the MCP dispatcher both go through it, so there is
one construction site rather than two. Safe to build wx controls there: that
handler is dispatched on the main thread by CallAfter, as its own comment
says.
The startup saving is untouched — a launch that never opens the tab and never
speaks MCP still builds nothing.
Verified: libslic3r_gui builds clean 745/745; fork parity green with snaporca,
which carries the same fix (McpControl.cpp is a byte-identical shared source).
* build: remove std::move that blocks copy elision
std::move wrapped around a temporary, or around a local being returned,
stops the compiler constructing it in place. Each edit is the fix clang
suggests, which is to delete the std::move call and keep its argument.
Three of the 39 sites save a move, the two return std::move(local) in
Print.cpp and TreeSupport.cpp:2749. The rest are equivalent either way
and match how the codebase already writes this elsewhere.
Clears 39 -Wpessimizing-move warnings.
* build: drop null checks on references and this
A reference cannot be bound to null and this cannot be null, so the
compiler folds these conditions to true and drops the guard. Seven are
if (&bitmap && bitmap.IsOk()), where IsOk() already does the work; two
test this directly. The guarded code runs either way, so removing the
dead operand changes nothing.
Clears 11 -Wundefined-bool-conversion warnings.
* fix(deps): build the dependencies from scratch with clang-cl
Six dependencies fail once the superbuild compiles them with clang-cl instead
of cl:
- OpenSSL never goes through CMake. Its VC-WIN64A makefile only works with cl,
and an unquoted clang-cl path with spaces produces no .obj files at all, so
the lib step dies with LNK1181. Pin the upstream toolchain.
- Boost.Container's bundled dlmalloc passes int* to the Interlocked API. cl
warns, clang rejects it.
- curl 7.75's configure probes rely on C laxness clang rejects. The results
flip and nonblock.c ends up in the AmigaOS IoctlSocket branch.
- OCCT installs RelWithDebInfo into bini/libi while find_package looks in lib.
It also prepends -Wl,-s to the shared linker flags for every Clang build,
which the MSVC-style linker gets as an argument it does not know. Both
patched hunks sit inside if (MSVC) in the OCCT sources.
- wxWidgets lands in lib/clang_x64_lib, so wxWidgetsConfig.cmake falls back to
the layout that exists instead of assuming vc_x64_lib. It tries the derived
path first, so a cl-built tree consumed by clang-cl keeps resolving the way
it does today. The patch step also resets the one file it touches, so it can
run again after an interrupted build or after the patch itself changed.
- wxInspector goes through FindwxWidgets, which only searches lib/vc*_lib
because _WX_TOOL is hardcoded to vc. It now gets the root and lib dir
derived the same way wxWidgetsConfig.cmake derives them.
Eigen is the seventh, and it breaks on the generator rather than the compiler.
Its test, lapack and blas/testing subdirectories all call
enable_language(Fortran), and they default to ON because the dependency
configures as its own top-level project. Whether that hurts depends on what
CMake finds: the Visual Studio generator supports no Fortran and finds nothing,
clang-cl sits next to the LLVM toolset's flang and works, while MSVC with Ninja
finds Strawberry Perl's MinGW gfortran, which this build already requires for
OpenSSL, and hands it the MSVC-style /machine:x64 that MinGW's ld reads as a
missing input file. The configure dies there and takes every dependency still
in flight with it. Only the headers are consumed here, so the three subprojects
are off.
* fix(deps): honor the superbuild's generator and compiler in sub-builds
orcaslicer_add_cmake_project pinned every dependency sub-build to the Visual
Studio generator whenever MSVC was true, which is also true for clang-cl. That
generator selects its compiler by toolset and ignores the CMAKE_C_COMPILER and
CMAKE_CXX_COMPILER this file already forwards, so the dependencies were built
with cl.exe no matter which generator or compiler the superbuild was given.
Key the three affected decisions on the generator instead: which generator the
sub-builds use, whether CMAKE_BUILD_TYPE is forwarded, and /m versus -j. A
Visual Studio superbuild is unchanged, so the default path and CI behave
exactly as they do today.
build_release_vs.bat now accepts -l to select clang-cl, alongside the existing
-x for Ninja, so the generator and the compiler can be chosen independently. On
the Visual Studio generator -l reaches the slicer only, through the ClangCL
toolset, because the dependency sub-builds have no toolset to inherit; a deps
build in that combination says so rather than quietly using MSVC.
* fix(deps): use upstream wxWidgets compiler layout fix
The compiler-prefix layout fix now comes from SoftFever/Orca-deps-wxWidgets#7, so remove the duplicated local patch and apply step.
* fix(deps): stop Assimp enabling ccache on the RC rule
ASSIMP_BUILD_USE_CCACHE defaults on and applies the launcher through the
global RULE_LAUNCH_COMPILE property, so it wraps the resource-compiler rule
as well. Under Ninja that rule goes through cmcldeps, which does not survive
being launched by ccache, and the build fails with clang-cl reporting /fo as
a missing file.
The superbuild already forwards CMAKE_<LANG>_COMPILER_LAUNCHER, which CMake
applies per language and so keeps clear of the RC rule.
---------
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
Co-authored-by: raistlin7447 <kris.austin@gmail.com>
Leo Lobato