Fix adaptive fill issues
- Disconnecting from walls at low density
- Not supporting rotation
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* Grid non-crossing for multiline
cleaning
Replaced negative offset logic with surface contraction to reduce overlap with perimeters.
center the infill
filltriangles
update triangles
preallocate memory
Update FillRectilinear.cpp
Update FillRectilinear.cpp
overlapp adjustment
Fix Crash
Update FillRectilinear.cpp
density tunning
density tunning
fine tunning
reserve polilines
Grid non-crossing for multiline
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
Co-Authored-By: discip <53649486+discip@users.noreply.github.com>
* Improve multiline fill offset and polyline closure
Changed offset type from jtRound to jtMiter in multiline_fill for better geometry. Updated polyline conversion to require at least 3 points and ensured polylines are closed if not already. Updated FillGyroid, FillTpmsD, and FillTpmsFK to pass the 'close' argument to multiline_fill.
cleaning
FillAdaptive Noncross
Only use clipper if worth it
safeguard
fix overlap
Update FillRectilinear.cpp
FilllRectilineal multiline clipper
Update FillRectilinear.cpp
FilllRectilineal multiline clipper
Update FillRectilinear.cpp
Update FillRectilinear.cpp
fix 3d honeycomb
Simplify polylines
Update FillBase.cpp
Update FillBase.cpp
cleaning
Improved Multiline Function
This ensures `multiline_fill()` will correctly generate multiline infill with
closed loop polylines if the input infill line is a closedloop polyline. This
ensures that the multiline infill doesn't have little gaps or overlaps at the
"closed point" of the original infill line.
This changes how the tangent is calculated for the first and last points in a
polyline if the first and last points are the same, making it a closed loop.
Instead of just using the first or last line segment, it uses the line segment
between the points before the last point and after the first point, the same
way that all the other poly-line mid points are handled.
It also uses eigen vector operations to calculate the points instead of
explicitly calculating the x and y values. This is probably faster, and if not
then it is at least more concise.
Hibrid Multiline Function
Update FillRectilinear.cpp
Update FillRectilinear.cpp
Update FillRectilinear.cpp
Update FillRectilinear.cpp
clipperutils multiline hibrido
Update FillBase.cpp
Update FillBase.cpp
Update FillBase.cpp
multiline hibrido
arc tolerance
multiline con union
Update FillBase.cpp
Update FillBase.cpp
Update FillBase.cpp
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
Co-Authored-By: Donovan Baarda <dbaarda@gmail.com>
* Switch multiline offset logic to Clipper2
Replaces Clipper-based multiline offset logic in FillBase.cpp with Clipper2, using InflatePaths and Union for offsetting and merging. Adds new conversion utilities in Clipper2Utils for handling Paths64 to Polygons/Polylines and updates headers accordingly.
* Refactor multiline_fill to always use Clipper2 logic
Removed the 'use_clipper' parameter from multiline_fill and updated all callers to use the new signature. The function now consistently applies Clipper2-based offset logic for multiline infill, simplifying the code and ensuring uniform behavior across fill patterns.
* Change offset join type to Round in multiline_fill
Replaces the Miter join type with Round in the InflatePaths call within multiline_fill. For smotther print travels.
* Increase max infill multiline to 10
Raised the maximum allowed value for the 'Fill Multiline' infill parameter from 5 to 10 to support more lines in infill patterns.
* Refactor multiline_fill to optimize offset logic
Replaces manual conversion of polylines to Clipper2 paths with Slic3rPolylines_to_Paths64 and filters short paths using std::remove_if. Uses ClipperOffset for path inflation and streamlines merging and conversion to polylines, improving performance and code clarity.
* half iteration because is bucle
* Funciona 1
Refactored the multiline_fill function to streamline the insertion of center lines by directly checking for odd line counts and removing redundant logic. This improves code clarity and reduces unnecessary checks.
* Refactor multiline_fill for improved offset logic
Reworked the multiline_fill function to simplify and clarify the logic for generating multiple offset lines. The new implementation computes offsets more explicitly for odd and even cases, creates a fresh ClipperOffset for each band, and improves conversion between Clipper2 paths and polylines. This enhances maintainability and correctness of the multiline fill generation.
* Quartercubic multiline
* fillplanePath
fix bounding box
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* fillconcentric multiline
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* Update FillBase.hpp
* cleaning
* Refactor multiline_fill to clean polylines and reuse offsetter
Invalid polylines with less than two points are now removed before processing. The ClipperOffset object is created once and reused for each offset, improving efficiency and code clarity.
trigger build
* Optimize Filltrapezoidal
Refactored the trapezoidal fill pattern generation to precompute base row templates and reuse them with vertical translation, reducing redundant computations and improving code clarity. This change enhances performance and maintainability by avoiding repeated construction of row patterns within loops.
* Replace push_back with emplace_back for Polyline points
Updated Polyline point insertion from push_back to emplace_back for efficiency and clarity. Also refactored row copying logic to avoid in-place modification, improving code readability and safety.
* Update FillRectilinear.cpp
* Reserve space for poliline points
* Union not needed
* Update FillRectilinear.cpp
* unused functions
* compactado
Update FillRectilinear.cpp
* Adjust minimum rows for better performance
* Update FillRectilinear.cpp
---------
Co-authored-by: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
Co-authored-by: discip <53649486+discip@users.noreply.github.com>
Co-authored-by: Donovan Baarda <dbaarda@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Fix: Fixing the logic of the adaptive layer height for supports
Removing `tree_support_adaptive_layer_height` because its logic duplicates `independent_support_layer_height`
This new feature allows users to override flow ratios for the following extrusion path types:
* First layer (excluding Brims and Skirts)
* Outer walls
* Inner walls
* Overhang perimeters
* Sparse infill
* Internal solid infill
* Gap fill
* Support
* Support interfaces
* New materials
* Temps
* Full filament type list
* Improve nozzle temperature range validation messages
Separates minimum and maximum recommended temperature warnings for nozzle configuration + generig °c usage.
Co-Authored-By: Alexandre Folle de Menezes <afmenez@gmail.com>
* Material Updates
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* petg-cf10 should be petg-cf
options.
* Pla reduced range
* Adjust some temps
* FilamentTempType Temperature-based logic
* chamber temps
* Fromatting
* Filament chamber temperature range support
Introduces get_filament_chamber_temp_range to retrieve safe chamber temperature limits for filament types. Updates ConfigManipulation to use these limits instead of hardcoded values.
* add adhesion coefficient and yield strength
Replaces hardcoded material checks for adhesion coefficient and yield strength with lookup functions using extended FilamentType struct.
* Thermal length
* Fix
* Refactor filament type data to MaterialType class
Moved filament type properties and related lookup functions from PrintConfig.cpp into a new MaterialType class.
* Fix adhesion_coefficient
Co-Authored-By: SoftFever <softfeverever@gmail.com>
---------
Co-authored-by: Alexandre Folle de Menezes <afmenez@gmail.com>
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
after enabling the ribbed outer wall
jira: STUDIO-10294
Change-Id: I08bd00c3c3ef643f4226ce0b882cd62ff680ae65
(cherry picked from commit cfeb574422741bbe48747aa7305fea2a13b6d834)
and fix wipe error when enable timelapse and in single color
and set rib wall as default
jira: none
Change-Id: Ic365bb7ee0ee6715c9d4f4f00b4bca9fd472c61a
(cherry picked from commit 89b59f1c41e0f360457622438a09237bfa1eaa18)
1.Always pop up to switch support type for PVA filaments
2.Rename the old "on_filament_change" to "on_filament_count_change",
add a new function as "on_filament_change"
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib5a96f2334bbe016db6661864d44e66c1fc5660f
(cherry picked from commit a17aa8c701d05cee57fb9d422a5bcde9f434fd7b)
* refactor Infill rotation template
* clean up comments
* set default solid_infill_rotate_template to empty
* Fix an issue that infill_direction solid_infill_direction not working as expected
* update based on feedback
and modify the min_depth_per_height
jira: none
Change-Id: I4860df661b4dd1f66677112d14e60560bc4a73be
(cherry picked from commit 00810d685d01a91b5373f3315413aaef1fe49cbc)
* Feature: Fuzzy Skin Extrusion Mode
This extension allows you to add new features to the fuzzy skin generator.
* Add auto switch to Arachne mode
* Move dialog to `update_print_fff_config` and update how `is_msg_dlg_already_exist` is used
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* SPE-2486: Refactor function apply_mm_segmentation() to prepare support for fuzzy skin painting.
(cherry picked from commit 2c06c81159f7aadd6ac20c7a7583c8f4959a5601)
* SPE-2585: Fix empty layers when multi-material painting and modifiers are used.
(cherry picked from commit 4b3da02ec26d43bfad91897cb34779fb21419e3e)
* Update project structure to match Prusa
* SPE-2486: Add a new gizmo for fuzzy skin painting.
(cherry picked from commit 886faac74ebe6978b828f51be62d26176e2900e5)
* Fix render
* Remove duplicated painting gizmo `render_triangles` code
* SPE-2486: Extend multi-material segmentation to allow segmentation of any painted faces.
(cherry picked from commit 519f5eea8e3be0d7c2cd5d030323ff264727e3d0)
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* SPE-2486: Implement segmentation of layers based on fuzzy skin painting.
(cherry picked from commit 800b742b950438c5ed8323693074b6171300131c)
* SPE-2486: Separate fuzzy skin implementation into the separate file.
(cherry picked from commit efd95c1c66dc09fca7695fb82405056c687c2291)
* Move more fuzzy code to separate file
* Don't hide fuzzy skin option, so it can be applied to paint on fuzzy
* Fix build
* Add option group for fuzzy skin
* Update icon color
* Fix reset painting
* Update UI style
* Store fuzzy painting in bbs_3mf
* Add missing fuzzy paint code
* SPE-2486: Limit the depth of the painted fuzzy skin regions to make regions cover just external perimeters.
This reduces the possibility of artifacts that could happen during regions merging.
(cherry picked from commit fa2663f02647f80b239da4f45d92ef66f5ce048a)
* Update icons
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* Make the region compatible check a separate function
* Only warn about multi-material if it's truly multi-perimeters
* Improve gizmo UI & tooltips
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* make **`Reverse threshold`** inactive when **`Reverse only internal perimeters`** is activated
* Update ConfigManipulation.cpp
* 100%% => 100%
Also fixed a typo along the way.
* Infill Line Multiplier
* Modular Offset Function
* Lightning multiline
* Crosshatch Multiline
ipCrosshatch
* cleaning
Cleaning
clean2
* 3d Honeycomb
cut poliline ends
* Fill Tpmsd Multiline
Fill Tpmsd Multiline
* Update Multiline function
multiline funcion simplify
* Update FillTpmsD
* FillHoneycomb
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Fix Honeycomb Multiline
Simplify polylines in honeycomb infill generation
* Improve multiline infill support and pattern simplification
Moved multiline infill application after pattern translation and simplification in Fill3DHoneycomb, and added multiline support to FillAdaptive. Updated honeycomb and 3D honeycomb infill to simplify polylines to 5x line width. Extended GUI and config to support multiline for Adaptive Cubic infill pattern and clarified max value comment.
minimum changes
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* Increase multiline fill spacing in honeycomb infill
Adjusts the spacing parameter in the multiline_fill function to 1.1 times the original spacing, potentially improving infill distribution or print quality.
* Refine fill_multiline tooltip and pattern support logic
Updated the tooltip for the 'fill_multiline' parameter to improve clarity and punctuation. Refactored the logic in ConfigManipulation.cpp to clarify which infill patterns support multiline infill.
* better management of non supported infill patterns
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* Enable toggling of surface density and overlap options
Added toggling for 'top_surface_density', 'bottom_surface_density', and 'top_bottom_infill_wall_overlap' fields in based on shell presence.
* un toggle shell overlapping option
---------
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
* SPE-2405: Add Zig Zag infill that is rectilinear infill but with a consistent pattern between layers.
This Zig Zag infill is inspired by the Zig Zag infill in Cura.
Change-Id: I798affa99f4b5c3bd67f47643e67530fb7c3e0cb
(cherry picked from commit 2808d04d5deef6f99f9618648e46f11de03efc98)
* Add Cross zag and locked-zag for shoes
Ported from BambuStudio
* wip
* sparse infill roratation template
* solid_infill_rotate_template
* remove rotate_solid_infill_direction
* hide sparse infill rotation template for non applicable infill pattern
* hide solid_infill_rotate_template for non supported solid infill patterns
* update icon
* support empty string for ConfigOptionFloats deserialize
* fix build errors
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* Generate support interface iron extrusion
* Always ironing last
* Add options
* Move ironing speed to speed tab
* Don't iron places that are covered by upper support layers
* Disable support interface spacing settings when support ironing is enabled
* Update text
* Add new Bambu RIB wall feature, including only the rib wall generation algorithm.
* Fix Linux compilation errors.
* Attempt to fix flatpak build
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
