* Remove Unused Project Includes and Forward-Declare Where a Type Is Only Referenced
Generated with include-what-you-use and applied conservatively. Only OrcaSlicer's own headers, the ones under src/ and tests/, are removed or forward-declared; standard-library and third-party includes are left alone. An include is removed only when both the Release and the Debug configuration leave it unused, never from inside a conditional block, and never from a file with platform-specific blocks, which only gain includes. Files whose only use of a header sits behind a feature or debug macro (libvgcode's OpenGL ES and marker code, the ARACHNE/TESTS_EXPORT_SVGS debug output) keep their includes.
clonable_ptr.hpp gains #pragma once; it had no include guard and was only safe while Config.hpp was its sole includer.
* Remove Unused Project Includes From Files With Platform-Specific Code
A Linux include-what-you-use run cannot see the code inside _WIN32, __APPLE__ or __linux__ blocks, so its verdict is only taken where nothing the removed header declares, directly or through what it includes, is named inside those blocks. Removals also have to hold in both the Release and Debug configuration and never touch a line inside a conditional block.
* Restore the libslic3r Precompiled Header and Direct Includes Lost in the Platform Pass
The platform-file pass treated pchheader.hpp as an ordinary header and
emptied it, and left GUI_Preview.hpp and 14 other files relying on
headers they no longer reached directly.
* Restore MainFrame.hpp in ParamsDialog.cpp for the Windows-Only Reparent Call
* Include Headers That Files Reached Through Ones the Cleanup Removed
* Drop Includes Duplicated by the Cleanup or by Main's Own Additions
* Leave PreciseSeam.cpp as Main Has It After the Precise Seam Rework
A painted relief did not survive closing the project: nothing about the feature
was written to the .3mf, so the layers, their textures and the paint mask were
all lost on save. The layer struct's cereal save()/load() serve the undo/redo
stack only, which is one session and one binary stream.
Write the layer stack and the per-volume options as JSON in the archive, and
each layer's texture as the image file it was loaded from, both referenced by
path - the same split EmbossShape already makes for its SVG. The image stays
out of the XML deliberately: it is binary and routinely megabytes, and base64
in an attribute would bloat the one file every reader parses just to list the
objects. JSON rather than the cereal stream next to it because that one is
positional and unversioned, which would make every future field a
project-breaking change; an unknown key is ignored and a missing one keeps its
default, so a project written by either side keeps loading.
The paint masks go in as one attribute per layer slot, mirroring paint_color.
Older readers ignore attributes they do not know, so a project written here
still opens in a build without the feature - it loses the relief, which is all
it could have done with it anyway.
The layers are restored while the volume is being built rather than after the
archive is walked: volumes are constructed only once the whole archive has been
read, so a hook placed after the walk ran before any volume existed and
restored nothing.
slice_single_volume_regions() sliced Precise Seam modifiers with
trafo_centered(), but a belt printer slices its layers with
trafo_sliced(): the belt rotation, any pre-slice remap and the lift off
the plate on top. On a belt print the modifier regions landed in the
unrotated frame, away from the walls they were meant to place the seam
on. Slice them with trafo_sliced(), as the support volumes and the seam
enforcers already are. It equals trafo_centered() off a belt printer.
Brings belt-printer up to main 4b4a261787. Resolutions:
- G-code header (#15897, #15915): main moved the header, config and
thumbnail block later in _do_export; write_belt_header() moves with it,
still after the thumbnails and outside the BTT_TFT gate.
- _extrude: first-layer acceleration keeps the per-path first-layer plane
test with main's cached nozzle index (#16028); main's set_speed out-param
form (#16108) everywhere else.
- GCodeWriter (#16108): the arc-to-polyline fallback for machine mappings
that cannot express G2/G3 now runs in the out-param extrude_arc_to_xy,
which is the overload GCode calls, and appends to the caller's string.
- GCodeProcessorResult: the belt fields join main's forwarding assign.
- Clipper2 (#15969): belt arrange helpers take Slic3r::Point; the tree
support join types lose their ClipperLib qualifier.
- CLI arrange (#15837): belt printers still reserve no wipe tower.
- Wipe tower options (#15841): the two new sparse-layer toggles are hidden
for belt printers like the rest of the tower options.
- Keyboard shortcuts (#15706): main's registry replaces the old key switch;
the belt view toggle is re-registered in the next commit.
- Print::process: the belt purge-plan undo runs before main's SliceStarted
event.
- scripts/filament_id_snapshot.json: deleted on main (a77209af8f).
- Includes and appended tests: union of both sides.
Selections are drawn as opaque faces in the selection colour with a cased outline instead of a
translucent tint over the body, so they read on a body of any colour. Selecting a Feature tree
row lights the faces that feature made rather than its whole body, which also makes fillet and
chamfer rows highlight again.
perf: skip estimating curled walls when nothing reads them
The curled extrusion estimate ran whenever a region had overhang speed on,
which is the default, but only the slowdown for curled perimeters reads the
curled lines it produces, and that slowdown is off by default. The step now
also requires a region with the slowdown on, and clears the curled lines
when it skips the estimate, so none are left from an earlier slice.
Also fixes stale fan commands due to the stale curled lines on the reused layers.
Every file that included STEP.hpp, directly or not, got namespace fs = boost::filesystem at global scope, and 29 sources and three headers relied on it without saying so. Headers now spell out boost::filesystem, and each source that uses fs declares the alias itself.
* Fix CLI Crashes on Malformed Project, Assemble List and No-Input Runs
Four CLI paths indexed vectors without checking their size and crashed
with SIGSEGV on malformed input:
- A project inherits_group whose length is not the filament count plus
the process and printer entries was split by position. It is now
ignored with a warning, as if the project had none.
- An assemble list object with an empty filaments list passed validation
and was then read at index 0. It is now rejected as a config error, as
is a negative filament id.
- --slice N --arrange 1 on a project without plate metadata read the
missing plate data. It now falls back to the plate's own filaments,
like the other plate data reads.
- --assemble with no input model built an object with no volumes. It is
now rejected as invalid parameters.
A tests/cli script covers each case through the binary, since all four
live inline in CLI::run().
* Move the Assemble List Parser into libslic3r
Behaviour-preserving move of the --load-assemble-list JSON parser and
its plate/object structs from the CLI into libslic3r/Format/AssembleList,
so the format can be unit tested. The parser returns its own
AssembleListResult and takes the plate limit as a parameter; CLI::run
maps the result to the same exit codes as before. Every validation rule
and log message is unchanged.
Adds Catch2 coverage of the valid layout and each validation rule.
* Keep the Process and Printer of an inherits_group of the Wrong Length
A project whose inherits_group did not have one entry per filament plus
the process and printer entries was loaded as if it had none. The CLI
then looked for system presets under the names of the user presets,
found none and refused to slice a project that slices on main.
The group is now read as before: the process first, the printer last
and the filaments in between, up to the filament count. A filament
without an entry counts as a system preset. A group with fewer than two
entries is still ignored. The warning stays.
The purge plan snaps every object onto one layer grid after the brim is built;
the per-layer brim bands follow their layers but the apron bands below the
first layer carry their own print_z and were left behind, which is why a brim
was refused next to a purge tower object. The shift now moves them too and the
combination is accepted again.
On a belt the parts print in belt order, so every colour change between parts
is a filament change. Arrange packs items in extruder order already, but it
grew the pile around its centre, so the colours ended up interleaved. A belt
print now packs from the leading end of the bed, each row filling across the
belt before the pile advances, and the objective charges an item for every
packed part of another colour it does not fully follow along the belt,
counting the tilted layers that reach cot(angle) * height past a part, so
each colour prints as one run. The direction follows the slicing rotation: a
rotation about X prints toward +Y, one about Y toward -X, and a negative angle
flips it. Packing from the edge also means the brim has to be kept on the
bed: a belt brim is printed brim_width wide for every brim type, so that much
is reserved along every edge (between parts the brims may overlap, as on any
printer).
The purge prism is regenerated from the arranged parts, flush with the far
edge of the bed, yet arrange moved it about like a part and packed parts into
the strip it comes back to. Arrange now skips the prism and reserves its strip
with a fixed virtual item, like a bed exclusion area, whenever the parts use
more than one filament.
The prism's length follows the parts plus a ramp per unit of height; with the
height at its cap that ran 100 mm past the end of a 500 mm belt and the project
could not print. The bar now stops at the plate end, and the purge planner's
existing warning reports what the shortened bar cannot absorb.
Release builds install each vendor as its preset cache alone. The
read-only preset load the CLI uses to resolve an inheriting user preset
passed allow_cache = false to keep caches from being written, which
also stopped them from being read, so every vendor fell back to JSONs
that are not installed and the CLI failed.
The flag now only gates writing: a read-only load reads caches and
writes none. The filament library is also read from its cache whenever
that is all that is installed, so a vendor updated over the air still
resolves against it.
* Refresh a CLI Project's Filament Settings From Their System Presets
The CLI loads a project's printer and process settings as the GUI does,
taking every key the project does not list as changed from the current
system preset, but it kept the stored filament values. A project saved
before a profile update then sliced with old filament values on the
command line and with the current ones in the GUI.
Every project filament that no loaded filament replaces is now resolved
by its system preset name and fed to the filament merge the up-to-date
path already uses, which keeps the keys listed in
different_settings_to_system and maps per-variant values onto the
preset's variants. This covers a plain run, --uptodate without
--uptodate-filaments, and the slots --load-filaments leaves empty. The
merge tells refreshed entries from loaded ones per entry instead of by
the global loaded-filament count, and the entries are kept in slot
order. A project filament saved under a name the presets have since
split per nozzle is resolved through the name conversion the GUI uses,
which PresetBundle now exposes.
* Check the Project Refresh Test's Result Directly
Shellcheck SC2181: test the checker's exit status in the if instead of
reading $? afterwards.
* Ignore Clipper, libpng, mcut and Boost.Polygon Internals in clang-tidy
Each only works through a wrapper or umbrella header: libslic3r/clipper.hpp or clipper_z.hpp configure Clipper before including it, png.h pulls in libpng's config headers, and Boost.Polygon's headers only compile through polygon.hpp or voronoi.hpp.
* Ignore minilzo's Config Headers in clang-tidy
lzoconf.h and lzodefs.h are internal to minilzo.h, which is what the code includes.
* Add Missing Includes Across the Remaining Sources and Tests
Covers src/slic3r/Utils, src/slic3r/plugin, src/slic3r/Config, src/libvgcode, src/dev-utils, src/OrcaSlicer.cpp and tests/, the directories left after src/slic3r/GUI and src/libslic3r. Generated with clang-tidy misc-include-cleaner. libvgcode's own headers are included by relative path as in the rest of that library, and Catch2 and pybind11 with angle brackets as elsewhere in the repo.
* Make the GUI and Test Headers Compile on Their Own
Each now includes, or forward-declares, what it uses instead of relying on what its includers happened to include first. Headers that only compile on one platform, or that nothing built includes, are left alone.
* Keep Windows and nanosvg Setup Ahead of the Added Includes
OrcaSlicer.cpp and several tests set _WIN32_WINNT, WIN32_LEAN_AND_MEAN or NOMINMAX before including Windows.h, and the profile validator defines NANOSVG_IMPLEMENTATION before any libslic3r header. The added includes had landed above those blocks, which broke the Windows build.
* Add the GUI Includes the First Pass Missed
Covers headers that only became editable once they compiled on their own, and wx symbols whose suggested header changed as the clang-tidy ignore list grew after the src/slic3r/GUI pass.
* Keep the Added Test Includes Below the NOMINMAX Guard
test_marchingsquares.cpp and test_texture_displacement.cpp had includes inside #ifndef NOMINMAX, which the tests inherit as defined on Windows from libslic3r, so those were skipped there. .clang-tidy also ignores the MSVC STL and UCRT internals, Boost.Multiprecision's fwd.hpp and CPython's Windows include directory, as in #16068.
A tool change added from the layer slider switches heads mid-print like a
painted color, but the parallel-mode checks only looked at the filaments of the
plate's objects, support and prime tower. A one-filament plate with a slider
change to a copying head's filament passed them. They now include those tool
changes, as the plate's warning badge already did.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Only the primary and its Span tools print a Span plate's colors; the other
active tools replay them. The multicolor rule never checked where each color
went, so a filament on a copying or mirroring tool, an unused one, or past the
end of the physical extruder map was accepted. It is now refused, and the
message names the tools that print colors and where the map sends the
offending filament.
The plate's warning badge also read the raw physical_extruder_map rather than
the effective one slicing uses, so on printers that set no map it disagreed
with the slicer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Three commits: G-code export caches its filament config slot and repeated
option lookups, per-plate bed type overrides follow the printer's multi-bed
support, and the gizmo checkboxes and texture displacement panel get styling
and refresh fixes. No conflicts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The editor only replaced an empty name, so a row could be given a name another
row already had. A plate stores its mode by name and find_imex_mode() takes the
first row with it, so the second row was unreachable, and the plate's mode
list repeated the name: left-click stuck on it, or looped without getting back
to Primary.
An edited name that another row already carries, or the reserved Primary name
in any case, is now replaced when the edit is committed: "copy" becomes
"copy 2". The edited row yields, so plates keep resolving to the row they
meant, and tabbing through a field without changing it checks nothing.
Resetting a row to a saved name that another row has since taken does the
same. The plate's mode list comes from imex_plate_mode_choices(), which lists
each name once, so a profile that already has duplicates still cycles.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Five commits: a section view for the 3D canvas, a faster G-code preview, user
preset values kept on extruder variants they don't list, debug build CMake
fixes, and a 30 minute timeout on macOS notarization.
Two conflicts, both in GLCanvas3D. The header's were neighboring
declarations, kept from both sides. In the transparent pass, the section view
removed the assemble view's painter block that followed our ghost render;
the ghost render stays where it was, at the end of that pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The band was a second pass over the finished layer that fought the fan commands
the layer pass had already written (overhang, bridge and resume requests). The
generator now marks where each segment enters and leaves the band and the layer
pass treats the band as the strongest fan request, so there is one place that
decides the fan.
The purge plan moves objects onto a common layer grid after the brim bands are
built, so the two cannot share a print. The prime tower setting alone still does
not block a brim. The missing-prism warning now counts the filaments the objects
use, as the GUI does.
With best_object_pos away from the bed centre the placer packs the pile
inside the bin and then translates it so its centre lands on that point,
without checking that it still fits there. A belt printer aims at the
leading end of the belt (BabyBelt Pro: 0.5, 0.05), so any pile longer than
the 50 mm around that point was pushed past the edge: four 90 mm parts on
the 95 x 500 mm belt ended with one across the edge and one outside while
290 mm of belt stayed free.
The final alignment now stops the pile at the edge of the bin; the items'
inflated boxes leave the object spacing as the margin. A pile that does not
fit along an axis is centred on it, as before.
The plate's mode button showed one icon whatever the mode. It now shows the
mode the plate slices as, the one its ghosts follow. imex_mode_kind() reads it
from the heads beside the mode's primary: none is Normal, any Span head is
Custom (the multicolor modes), otherwise any Mirror head is Mirror, and heads
that all copy are Copy. One Mirror head is enough because an IQEX mirror mode
copies within the primary's gantry.
The icons are Felix14-v2's: the four kinds, each in light and dark with a hover
state, replacing the single mode icon. Two fixes to them: the light Normal
border used the dark theme's gray, and an opacity="undefined" attribute hid one
of its strokes in nanosvg. The knight outlines are drawn at 1.0 rather than
0.8, matching the other plate icons and keeping Copy and Mirror apart when
zoomed out.
Co-authored-by: Felix14_v2 <75726196+Felix14-v2@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Seven commits: painted multi-material segmentation made deterministic, missing
includes added across src/slic3r/GUI, U1 high-flow nozzle variants, Windows
ARM64 build and HTTPS fixes, and a rule added to the wxWidgets agent skill.
Three conflicts, all include lists: upstream's include pass and ours each added
to the same lists in GCodeViewer.hpp, PartPlate.hpp and PartPlate.cpp. Resolved
as the union of both. Three includes both sides had added at different places,
which git kept twice, are kept once: Color.hpp and <set> in PartPlate.cpp,
<sstream> in Plater.cpp.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The IMEX fixtures set seven nozzles but kept multifilament_config's single
filaments x filaments flush block. get_flush_volumes_matrix splits that block
across the nozzles, leaving each with 7 values, and
ToolOrdering::reorder_extruders_for_minimum_flush_volume then reads them as a
7 x 7 matrix, past the end of the buffer. One of the affected tests segfaulted
on Windows x64; ASan reproduces the overflow in that test on Linux, where it
passed only by luck.
The fixtures now repeat the block once per nozzle, as the GUI does, and size
flush_multiplier to match, since append_full_config takes the nozzle count from
it. The helper is shared in test_helpers.
Co-authored-by: HanifKoh <76276251+HanifKoh@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep User Preset Values on Extruder Variants They Don't List
A user preset stores the variant list its parent had when it was saved.
When the parent later gains variants, update_diff_values_to_child_config
matched variants by name only and left the new ones at the parent's
value, so the user's settings were silently replaced there, and a
re-save wrote the system values into the user's file.
An unmatched parent variant now takes the child's first variant of the
same extruder, the rule slicing already uses in get_config_index_base.
A child without a variant list covers the parent's first extruder. The
name match also no longer indexes the child's extruder ids when it has
none.
* Share One Variant Column Rule Between Slicing, User Presets and Projects
Three places chose which variant column a value comes from, each with
its own copy of "the same variant and owner, else the owner's first
column": get_config_index_base when slicing, the user preset merge in
update_diff_values_to_child_config, and normalize_filament_values_to_variants
for projects and the CLI.
find_variant_column now holds that rule and map_variant_columns applies
it to a variant list, so a change to how missing variants are filled
reaches all three. Each caller keeps its own copy step. There is no
behaviour change: G-code is identical before and after. The one
relaxation is that get_config_index_base no longer reads past a short
id list when its two lists differ in length, which its assert already
rules out.
* Rename variant column helpers to variant index
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
SoftFever