* Add developer flag for printer agents
* Parse user print info on the UI thread to prevent heap corruption (#119)
get_user_print_info()'s HTTP fetch can run on a worker thread (e.g. BindJob),
but parse_user_print_info() mutates userMachineList (insert/erase/delete
MachineObject). on_machine_alive (SSDP) mutates the same maps on the UI thread
without locking, so parsing off-thread races the map and frees MachineObjects
out from under it -> heap corruption.
Keep all device-list mutation on the UI thread: parse inline when already on
the main thread, otherwise marshal via CallAfter so it stays serialized with
on_machine_alive.
* Prevent loss of user access code on LAN reselect
Keep user access code intact to maintain access rights even if
device slot is unpopulated, ensuring continuous connection
and status message reception.
* Harden send flow and separate upload failure recovery (#111)
* fix(send): harden FT send path + IP pre-flight UX
* Remove early returns
* Working Moonraker and Qidi printer agent transport (#104)
Folds the Qidi AMS box-mapping print
overrides (apply_box_mapping +
start_* wrappers) that the transport
fix builds on.
* Add support for runtime error status in plugins
Distinguish a loaded plugin whose
capability errored (RuntimeError,
warn-styled, stays checked) from a
load-time Error. Status now derives
via resolve_plugin_status(); enum
ordinal keeps dialog sort priority.
Unloading clears stale errors.
* Resolve duplicate agent ID conflicts
Reject a printer-agent capability
whose agent ID is already owned by
another capability or built-in:
flag the plugin error, disable the
capability, and warn the user
instead of silently ignoring it.
* fix: checkbox should depend on plugin is_loaded status
* Replace fake-enum printer agent dropdown (#121)
A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
* Reset device selection on agent swap or unload (#124)
set_live_printer_agent centralizes
the swap: deselect the machine,
clear stale sidebar state and the
previous agent's Other Devices, then
install the new agent (or null when
its provider vanished). Plugin
load/unload callbacks refresh the
dropdown and re-run agent selection.
load_last_machine no longer falls
back to the first available machine.
* Gate agent mode behind use_printer_agents toggle
Replace per-printer auto-activation
(is_current_printer_agent_plugin)
with a global experimental AppConfig
toggle, default off: legacy
print-host behavior is unchanged
until the user opts in. The toggle
drives device-tab routing, print
button defaults, connect-button
visibility and sidebar layout, and
dedups machine-select dialog opens.
* Track BBLPrinterAgentPlugin.py
* Add printer-agent and plugin status tests
Ports the agent lifecycle, duplicate
agent-id, built-in-id clash and
status-resolution tests. The loader
runs on a detached worker thread, so
the lifecycle tests live in their own
executable. Tests install the
production unload-side registry
wiring themselves (no GUI in the
test binary) and register agents
manually so concurrent loads stay
deterministic.
* fix: pin HTTP to prevent connection refusal
Set `use_ssl` to false to ensure Moonraker
connectivity, as the service uses HTTP rather
than HTTPS, preventing connection issues. Initialize
device info early for reliable name resolution.
* Bring Moonraker device panel to feature parity
The monitor panel showed wrong or missing
data for Moonraker printers, and its
controls did nothing.
Push payload now carries layer number and
total layers. Remaining time replaces the
wrong total_duration - print_duration
formula. The chamber light toggle maps to
Klipper SET_PIN / SET_LED, and pause,
resume and stop post to
/printer/print/{action}. Task thumbnails
resolve via /server/files/thumbnails onto
a new MachineObject thumbnail url.
Filament sync switches to pull mode so the
agent is queried on demand.
Not compiled or run.
* Stop blocking print on unreported nozzle data
* fix: make Klipper macro lamp control reliable
* Surface Moonraker webcams and gate unrunnable controls
* Keep Bambu AMS dialect out of the agent waist
M620 is Bambu firmware dialect, not a
neutral command. Composing it in
MachineObject let non-Bambu agents
(Moonraker/Klipper) forward it and
report success on firmware that
cannot run it.
Agents now own the dialect: the
default refusal on IPrinterAgent
returns not-supported so the UI
can say so; BBLPrinterAgent keeps
the byte-identical composition.
* Fix multi-color filament logic
Reuse color decoding across functions to improve
code readability and maintain consistency in
multi-color filament handling.
* Move Moonraker commands off the UI thread
Pause/resume/stop, g-code sends, temps, and
light ran synchronous HTTP on the UI thread,
freezing the app up to 10s per click on slow
or unreachable printers.
Run them on a single agent-owned FIFO worker
so g-code ordering is preserved, while command
translation stays synchronous so unsupported-
command dialogs still work.
Add a pending-disabled state to the pause,
resume, and abort buttons for Moonraker-family
printers: the icon only flips once the
WebSocket reports the real state, which also
rules out double-click races.
* Show Snapmaker U1 camera in Device tab
The U1 exposes no /server/webcams/list entry;
its camera only captures after an explicit
camera.start_monitor RPC, which the Moonraker
websocket executes unauthenticated but only
answers over MQTT - so the call is fire and
forget.
Start the camera when the camera view is
shown and renew every 300 s: the printer
retires the capture task at ~362 s and
stop_monitor is accepted but ineffective,
so teardown is simply to stop renewing.
Frames land in monitor.jpg as still JPEGs
(~2 fps at interval 0), so the webview loads
a local HTML wrapper that repolls with a
cache buster.
* fix: start stream when camera URL changes
* fix: stop Qidi slot parse throwing on null
* Keep printer-agent progress in sync
Keep the shared task progress aligned with agent
reports that lack Bambu cloud task identity.
Release the lazily allocated task during reset to
avoid leaks when machine objects reconnect.
* docs: document the printer-agent subsystem
* fix: merge access codes into one
* Reconcile implementation split with PR tip
* feat: abstract remaining gcode commands in devicemanager
* refactor: abstract bambu specific protocol to printer agent
* refactor: push bbl workflows to bbl printer agent
* remove unused
* fix: default impl
* fix callback error
* fix: remove redundant cache
* specify api for getting file transfer url
* revert file transfer abstraction
* fix: ams filament mapping workflow
* feat: update qidi to use subscription based filament sync mode
* fix: resolve stubgen byte header conflict
* fix: ams sync info and periodic ams sync via subscription workflow
* fix: skip filament sync dialog if filamentSyncMode is none
* feat: parse nozzle information for qidi and moonraker printer agents
* fix: extend access code requirements t 0, 8 or more characters.
* remove irrelevant docs
* fix: remove heavy includes from IPrinterAgent
* fix: defer filesystem and camera abstractions
* fix: remote do_fetch_filament_info from tests
* cleanup moonraker and snapmaker printer agents
* fix: access codes regression
* fix: tests
* fix: printer agent switching on preset change
* fix: remove unused variable
* fix: snapmaker U1 SelectMachineDialog blocking print
* fix: merge artifact
* fix: clear up some unrelated changes
* feat: connect to cloud printer and monitor
* feat: connect to cloud printer and monitor
* feat: generic camera stream support for http snapshot and rtsp
* fix: build & access code UI
* feat: generic camera stream support for http snapshot and rtsp
* fix: build & access code UI
* feat: connect to cloud printer and monitor
* feat: connect to cloud printer and monitor
* fix: build errors
* feat: camera via webrtc
* fix: build
* fix: cmake
* feat: remove frame assembler and change config to set protocol
* fix: orcaprinteragent refactor
* fix: LAN paths and camera stream
* feat: use ffmpeg to render http camera stream
* fix: make model_id/dev_type optional instead of blocking
* fix: connect via ip dialog
* feat: LAN impl for Orca Printer Agent
* fix: model_id resolution method for non bambu printers
* fix: ffmpeg http camera stream jittering due to incomplete frames
* fix: revert sdcard check
* feat: check printer storage status before sending
* fix: moonraker printer agent hang on printer power cut
* fix: shim layer for any compatibiliity changes
* fix: cloud printers were using the wrong MQTT endpoint
* feat: cloud download via HTTP
* temp: doc for intended change
* fix: warnings
* fix: warnings
* fix: camera auto-play on startup
* fix: split infra from impl
* fix: uninitialized ams state blocking print
* Fixes nullptr deref
* Log first before std::move
* fix: printer agent virutal optional functions
* fix: parameterize orcaslicer_copy_test_dlls() for printer_agent_plugin_tests
* Revert "fix: parameterize orcaslicer_copy_test_dlls() for printer_agent_plugin_tests"
This reverts commit 2f566e3779.
* Guard libdatachannel. Remove unused code
* fix: unit tests & unused variables
* fix(ci): deps build order for datachannel
* Resolve printer agent first before getting cloud printer agent
* fix(ci): set depends openssl
* fix: re-include apply header guarded by ifdef __APPLE__
* fix(ci): add libdatachannel to flatpak manifest
* fix: add internal_developer_mode chekc back to MediaPlayCtrl::load()
* fix: invoke js clearInterval on WebMediaController::stop
* fix: change rtc log level
* fix: inject provider, agent id and generation to get_user_print_info to ensure correct metadata
* fix: revert moonraker specific behavior
* fix: remove stale comment
* fix: use ORCA_CLOUD_PROVIDER instead of hardcoded string
* fix: remove hardcoded ICE servers
* feat: enable https camera stream mode
* fix: move non-mandatory printer agent function stubs to IPrinterAgent
* fix: dedupe compatible printer type check
* fix: stop the correct media controller
* fix: scope get_my_machine_list to printers listed under the current printer agent
* fix: move printer agent plugin tests into test_plugin_lifecycle.cpp
* fix: always build bundled DataChannel dep
* fix: disable unused DataChannel media support
* revert: filament sync work
* fix: wrap command_* with small wrapper
* fix: regression bug, connecting to bambu needs bblp username
* fix: default impl for vendor agnostic gcode commansd
* refactor: media controller playback routing and ownership
* fix: bump libdatachannel ver & update flatpak to use tar instead
* fix: stop flatpak DataChannel build from re-cloning over the sandboxed network
* fix: update windows ffmpeg prebuild
* fix: update printer agent plugin API
* fix: shift camera signaling channel to network agent
* fix: follow external-packages for flatpak libdatachannel deps & add flatpak path to use source_dir
* feat: add printer-agent.md doc to HLSD
* fix: guard DeviceManager command dispatch when no printer agent is bound
* fix: port BBL implementations from #15711
* refactor: connect_printer api and dialog
* fix(tests): make omitted printer agent operations answer like a missing agent
* fix: preserve printer agent defaults in PrinterAgentPluginCapabilityTrampoline
* test: cover printer agent default command dispatch
* fix: validate windows FFmpeg avformat library
* feat: extend optional printer model warnings to calibration & ams workflows
* fix: handle malformed printer progress values safely
* fix: clear webview document on stop
* chore: reduce diagnostic logging level to trace
* refactor: centralize printer compatibility checks
* tests: add device manager integration coverage
* tests: cover WebMediaController lifecycle with wxWebView stub
* fix: make integration tests headless
* refactor: collapse command_ams_refresh_rfid and command_ams_refresh_rfid2
* refactor: make printer connection SSL agent-specific
* fix: persist input printer host and port
* fix: use correct device id for Moonraker connections
* fix: make moonraker gcode commands asynchronous
* fix: preserve moonraker device names
* fix: add include for non BBL_RELEASE_TO_PUBLIC path in BBLPrinterAgent
---------
Co-authored-by: Andrew <159703254+andrewsoonqn@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Lam Wei Lun <weilun.lam@gmail.com>
For clang-cl, CMake sets the depfile flags to the gcc-style -MD, -MT and -MF,
passed through as -clang: arguments. ccache does not parse those, so a cache
hit writes only the object. Ninja has no depfile to read, so it records zero
header dependencies for that object and does not rebuild it after a header
edit. The stale object is still linked into the library and the DLL. sccache
0.15.0 reproduces the depfile on a hit and is unaffected.
Use /showIncludes instead. CMake already does that for MSVC, and ccache
reproduces it on a hit. A make-rules override sets the flags, because CMake
includes the override after Platform/Windows-Clang.cmake. It is forwarded to
each dependency because every one configures as its own CMake project, and it
is only set when the file exists, because scripts/flatpak/make_deps_tar.sh
packs deps/ alone.
In a build with a warm cache, 678 of 790 objects had no recorded headers.
Object code does not change. One GUI translation unit compiled both ways is
byte-identical apart from the COFF timestamp.
The deps superbuild passes the Visual Studio generator and platform to
every sub-build but not the toolset, so build_win.bat -d -l without -x
compiled every dependency with cl even though the superbuild had been
configured with -T ClangCL; CMake replaces the forwarded
CMAKE_<LANG>_COMPILER with whatever the toolset ran. The recipes that
adapt to clang-cl then disagreed with what had been built, and
wxInspector told FindwxWidgets to look in lib/clang_x64_lib while the
cl-built wxWidgets had installed into lib/vc_x64_lib:
Could NOT find wxWidgets (missing: wxWidgets_LIBRARIES
wxWidgets_INCLUDE_DIRS core base aui propgrid)
Forward CMAKE_GENERATOR_TOOLSET as well, so the dependencies compile
with clang-cl under MSBuild the way they already do under Ninja. Four
of them need more than that:
- OpenSSL always builds with cl, and MSBuild runs its nmake steps in
the project's toolset environment, where ClangCL puts clang's include
directory first and cl trips over clang's stdint.h. The project gets
the default toolset.
- Boost.Container's dlmalloc needs -Wno-incompatible-pointer-types
under clang. boost_container links as C++, and the Visual Studio
generator writes only the link language's flags into the project, so
its C file never saw CMAKE_C_FLAGS. Under that generator the option
goes through the C++ flags as well, with the defaults kept.
- Draco's tools and NLopt's testopt compile sources their own static
library also contains. MSBuild lists libraries before objects and
lld-link resolves archive members as each input arrives, so the
library's copy is pulled in before the executable's own object and
the link fails on duplicate symbols; link.exe defers the search and
Ninja lists the objects first. Nothing uses those executables, so
they get /FORCE:MULTIPLE there.
The Ninja path is unchanged: the generated configure commands of all
29 dependencies are identical before and after. OCCT's arm64 override
to cl still applies under Ninja but not under the Visual Studio
generator, where the toolset wins; that combination never built and is
left for a follow-up.
* fix(deps): build the dependencies from scratch with clang-cl
Six dependencies fail once the superbuild compiles them with clang-cl instead
of cl:
- OpenSSL never goes through CMake. Its VC-WIN64A makefile only works with cl,
and an unquoted clang-cl path with spaces produces no .obj files at all, so
the lib step dies with LNK1181. Pin the upstream toolchain.
- Boost.Container's bundled dlmalloc passes int* to the Interlocked API. cl
warns, clang rejects it.
- curl 7.75's configure probes rely on C laxness clang rejects. The results
flip and nonblock.c ends up in the AmigaOS IoctlSocket branch.
- OCCT installs RelWithDebInfo into bini/libi while find_package looks in lib.
It also prepends -Wl,-s to the shared linker flags for every Clang build,
which the MSVC-style linker gets as an argument it does not know. Both
patched hunks sit inside if (MSVC) in the OCCT sources.
- wxWidgets lands in lib/clang_x64_lib, so wxWidgetsConfig.cmake falls back to
the layout that exists instead of assuming vc_x64_lib. It tries the derived
path first, so a cl-built tree consumed by clang-cl keeps resolving the way
it does today. The patch step also resets the one file it touches, so it can
run again after an interrupted build or after the patch itself changed.
- wxInspector goes through FindwxWidgets, which only searches lib/vc*_lib
because _WX_TOOL is hardcoded to vc. It now gets the root and lib dir
derived the same way wxWidgetsConfig.cmake derives them.
Eigen is the seventh, and it breaks on the generator rather than the compiler.
Its test, lapack and blas/testing subdirectories all call
enable_language(Fortran), and they default to ON because the dependency
configures as its own top-level project. Whether that hurts depends on what
CMake finds: the Visual Studio generator supports no Fortran and finds nothing,
clang-cl sits next to the LLVM toolset's flang and works, while MSVC with Ninja
finds Strawberry Perl's MinGW gfortran, which this build already requires for
OpenSSL, and hands it the MSVC-style /machine:x64 that MinGW's ld reads as a
missing input file. The configure dies there and takes every dependency still
in flight with it. Only the headers are consumed here, so the three subprojects
are off.
* fix(deps): honor the superbuild's generator and compiler in sub-builds
orcaslicer_add_cmake_project pinned every dependency sub-build to the Visual
Studio generator whenever MSVC was true, which is also true for clang-cl. That
generator selects its compiler by toolset and ignores the CMAKE_C_COMPILER and
CMAKE_CXX_COMPILER this file already forwards, so the dependencies were built
with cl.exe no matter which generator or compiler the superbuild was given.
Key the three affected decisions on the generator instead: which generator the
sub-builds use, whether CMAKE_BUILD_TYPE is forwarded, and /m versus -j. A
Visual Studio superbuild is unchanged, so the default path and CI behave
exactly as they do today.
build_release_vs.bat now accepts -l to select clang-cl, alongside the existing
-x for Ninja, so the generator and the compiler can be chosen independently. On
the Visual Studio generator -l reaches the slicer only, through the ClangCL
toolset, because the dependency sub-builds have no toolset to inherit; a deps
build in that combination says so rather than quietly using MSVC.
* fix(deps): use upstream wxWidgets compiler layout fix
The compiler-prefix layout fix now comes from SoftFever/Orca-deps-wxWidgets#7, so remove the duplicated local patch and apply step.
* fix(deps): stop Assimp enabling ccache on the RC rule
ASSIMP_BUILD_USE_CCACHE defaults on and applies the launcher through the
global RULE_LAUNCH_COMPILE property, so it wraps the resource-compiler rule
as well. Under Ninja that rule goes through cmcldeps, which does not survive
being launched by ccache, and the build fails with clang-cl reporting /fo as
a missing file.
The superbuild already forwards CMAKE_<LANG>_COMPILER_LAUNCHER, which CMake
applies per language and so keeps clear of the RC rule.
---------
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
Co-authored-by: raistlin7447 <kris.austin@gmail.com>
SLIC3R_CAD=OFF now builds without SolveSpace or OCCT's ModelingAlgorithms
module, leaving the dependency set identical to upstream's, and the Design
tab's mate connector preference no longer appears in builds without the tab.
When the deps prefix and the project disagree about the option, the configure
fails naming the cause, rather than failing at link time or at first launch
on Windows. The Windows packaging step stages exactly the toolkits libslic3r
links.
Review request on PR #15238: "Move the SLVS to deps if the source code remains
unmodified. If any changes were made to the source code, move it to deps_src."
It is unmodified — all 20 files under src/libslic3r/slvs were byte-identical to
JacobStoren/SolveSpaceLib@4d87045, the extraction of solvespace.com's libslvs.
So deps/ it is, fetched by hash like every other dependency.
Only the CMakeLists is ours: upstream's builds a demo executable and installs
nothing, so deps/SLVS/CMakeLists.txt.in replaces it via PATCH_COMMAND — the same
shape deps/OpenCSG already uses. The public header keeps its spelling, so
SketchSolver.cpp still says `#include <slvs.h>` and needs no edit.
The CI deps cache is keyed on hashFiles('deps/**'), so it rebuilds itself.
Verified: dep_SLVS builds and installs, libslic3r links against SLVS::slvs, and
the CAD suite is unchanged at 2518 assertions in 194 test cases.
* Add wxInspector dep
* Initial intergration of wxInspector
* docs: add wxInspector plugins design spec
Design spec for two wxInspector plugins (DPIAware + CustomWidgets) that expose
OrcaSlicer's custom control properties in the inspector property grid.
Covers: DPIAware scale-factor properties, Button, CheckBox, TextInput,
SwitchButton, ProgressBar, Label, and LabeledStaticBox.
* docs: add wxInspector plugins implementation plan
6-task plan covering: source changes to existing widget headers,
DPIAwarePlugin, CustomWidgetsPlugin, registration helper,
MainFrame/CMake wiring, and build verification.
* feat: add getters/setters for wxInspector plugin access
Add minimal public accessors to DPIAware (set_scale_factor,
set_prev_scale_factor, set_em_unit, force_rescale), Button
(GetStyle, GetType, IsSelected), CheckBox (IsHalfChecked),
TextInput (GetCornerRadius), and LabeledStaticBox
(GetCornerRadius, GetBorderWidth, GetBorderColor, GetScale).
* feat: add wxInspector plugin registration helper
Add RegisterOrcaInspectorPlugins() inline function that creates
and registers the DPIAwarePlugin and CustomWidgetsPlugin as
static instances (matching wxInspector's built-in pattern).
* feat: add DPIAware wxInspector plugin
Exposes DPI scaling properties (scale_factor, prev_scale_factor,
em_unit, normal_font, force_rescale) on DPIFrame and DPIDialog
widgets. Uses dynamic_cast for detection and a template helper
to capture the correct static type for lambda accessors.
* feat: add OrcaCustomWidgets wxInspector plugin
Exposes Orca-specific properties on 7 widget types:
- Button: Style, Type, Selected
- CheckBox: Half Checked
- TextInput: Label, Text Value, Corner Radius
- SwitchButton: Value
- ProgressBar: Proportion, Show Number
- Label: Is Hyperlink, Font Point Size
- LabeledStaticBox: Corner Radius, Border Width, Border Color, Scale
Each widget type uses dynamic_cast for safe detection.
* feat: wire wxInspector plugins into MainFrame and build
Call RegisterOrcaInspectorPlugins() in MainFrame constructor after
SetupInspectorAccelerator(). Add all 5 plugin source files to
SLIC3R_GUI_SOURCES in CMakeLists.txt.
* fix: move plugin registration to GUI_App::on_init_inner
Register plugins once in app init rather than in MainFrame
constructor, which may be recreated during the application
lifetime.
* fix: include plugin headers in Registration.hpp for complete types
Static locals require complete type. Include DPIAwarePlugin.hpp and
CustomWidgetsPlugin.hpp instead of forward-declaring. Also remove
unused include from MainFrame.cpp (registration moved to GUI_App).
* fix: qualify DPIFrame/DPIDialog with Slic3r::GUI namespace
* Make DPIDialog inspectable. For other dialogs, we will add them if necessary later.
* docs: add spec for moving wxInspectable into DPIAware template
Move wxInspector::wxInspectable base class from DPIDialog and MainFrame
into the common DPIAware<P> template, making all DPIAware widgets
automatically visible in the inspector tree.
Co-Authored-By: Claude <noreply@anthropic.com>
* docs: add implementation plan for moving wxInspectable into DPIAware
Co-Authored-By: Claude <noreply@anthropic.com>
* docs: update spec/plan — move SetupInspectorAccelerator into DPIAware too
Co-Authored-By: Claude <noreply@anthropic.com>
* refactor: move wxInspectable and SetupInspectorAccelerator into DPIAware
DPIAware<P> now inherits wxInspector::wxInspectable and calls
SetupInspectorAccelerator in its constructor, making all DPIAware
widgets automatically appear in the inspector tree with the
Ctrl+Shift+I shortcut. DPIDialog now uses 'using' to inherit the
constructor. Remove redundant wxInspectable inheritance and
SetupInspectorAccelerator calls from DPIDialog and MainFrame.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: use LB_HYPERLINK constant instead of magic number 0x0020
Co-Authored-By: Claude <noreply@anthropic.com>
* Clean up
* Fix Linux build
* Don't build wxInspector sample
* Use shallow clone
* Try fix flatpak build
* Attempt to fix build again
* Fix build failure caused by https://github.com/wxWidgets/wxWidgets/commit/436c16135ec7ddf580f44624bf74c592aae43b66
* wxWidgets build only download required submodules
* This should fix build on Windows on ARM
* Enable PIC
* Disable layout inspector by default for public release
* Use wxInspector 1.0.0 release
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Update eigen from v3.3.7 to v5.0.1.
This updates eigen from v3.3.7 released on December 11, 2018-12-11 to v5.0.1
released on 2025-11-11. There have be a large number of bug-fixes,
optimizations, and improvements between these releases. See the details at;
https://gitlab.com/libeigen/eigen/-/releases
It retains the previous custom minimal `CMakeLists.txt`, and adds a
README-OrcaSlicer.md that explains what version and parts of the upstream
eigen release have been included, and where the full release can be found.
* Update libigl from v2.0.0 (or older) to v2.6.0.
This updates libigl from what was probably v2.0.0 released on 2018-10-16 to
v2.6.0 released on 2025-05-15. It's possible the old version was even older
than that but there is no version indicators in the code and I ran out of
patience identifying missing changes and only went back as far as v2.0.0.
There have been a large number of bug-fixes, optimizations, and improvements
between these versions. See the following for details;
https://github.com/libigl/libigl/releases
I retained the minimal custom `CMakeLists.txt`, added `README.md` from the
libigl distribution which identifies the version, and added a
README-OrcaSlicer.md that details the version and parts that have been
included.
* Update libslic3r for libigl v2.6.0 changes.
This updates libslic3r for all changes moving to eigen v5.0.1 and libigl
v2.6.0. Despite the large number of updates to both dependencies, no changes
were required for the eigen update, and only one change was required for the
libigl update.
For libigl, `igl::Hit` was changed to a template taking the Scalar type to
use. Previously it was hard-coded to `float`, so to minimize possible impact
I've updated all places it is used from `igl::Hit` to `igl::Hit<float>`.
* Add compiler option `-DNOMINMAX` for libigl with MSVC.
MSVC by default defines `min(()` and `max()` macros that break
`std::numeric_limits<>::max()`. The upstream cmake that we don't include
adds `-DNOMINMAX` for the libigl module when compiling with MSVC, so we need
to add the same thing here.
* Fix src/libslic3r/TriangleMeshDeal.cpp for the unmodified upstream libigl.
This fixes `TriangleMeshDeal.cpp` to work with the unmodified upstream
libigl v2.6.0. loop.{h,cpp} implementation.
This file and feature was added in PR "BBS Port: Mesh Subdivision" (#12150)
which included changes to `loop.{h,cpp}` in the old version of libigl. This PR
avoids modifying the included dependencies, and uses the updated upstream
versions of those files without any modifications, which requires fixing
TriangleMeshDeal.cpp to work with them.
In particular, the modifications made to `loop.{h,cpp}` included changing the
return type from void to bool, adding additional validation checking of the
input meshes, and returning false if they failed validation. These added
checks looked unnecessary and would only have caught problems if the input
mesh was very corrupt.
To make `TriangleMeshDeal.cpp` work without this built-in checking
functionality, I removed checking/handling of any `false` return value.
There was also a hell of a lot of redundant copying and casting back and forth
between float and double, so I cleaned that up. The input and output meshs use
floats for the vertexes, and there would be no accuracy benefits from casting
to and from doubles for the simple weighted average operations done by
igl::loop(). So this just uses `Eigen:Map` to use the original input mesh
vertex data directly without requiring any copy or casting.
* Move eigen from included `deps_src` to externaly fetched `deps`.
This copys what PrusaSlicer did and moved it from an included dependency under
`deps_src` to an externaly fetched dependency under `deps`. This requires
updating some `CMakeList.txt` configs and removing the old and obsolete
`cmake/modules/FindEigen3.cmake`. The details of when this was done in
PrusaSlicer and the followup fixes are at;
* https://github.com/prusa3d/PrusaSlicer/commit/21116995d78b74dee69ce42874b643012a7c14e5
* https://github.com/prusa3d/PrusaSlicer/issues/13608
* https://github.com/prusa3d/PrusaSlicer/pull/13609
* https://github.com/prusa3d/PrusaSlicer/commit/e3c277b9eea0ca25e90e2378bcda198d56c4d304
For some reason I don't fully understand this also required fixing
`src/slic3r/GUI/GUI_App.cpp` by adding `#include <boost/nowide/cstdio.hpp>` to
fix an `error: ‘remove’ is not a member of ‘boost::nowide'`. The main thing I
don't understand is how it worked before. Note that this include is in the
PrusaSlicer version of this file, but it also significantly deviates from what
is currently in OrcaSlicer in many other ways.
* Whups... I missed adding the deps/Eigen/Eigen.cmake file...
* Tidy some whitespace indenting in CMakeLists.txt.
* Ugh... tabs indenting needing fixes.
* Change the include order of deps/Eigen.
It turns out that although Boost includes some references to Eigen, Eigen also
includes some references to Boost for supporting some of it's additional
numeric types.
I don't think it matters much since we are not using these features, but I
think technically its more correct to say Eigen depends on Boost than the
other way around, so I've re-ordered them.
* Add source for Eigen 5.0.1 download to flatpak yml config.
* Add explicit `DEPENDS dep_Boost to deps/Eigen.
I missed this before. This ensures we don't rely on include orders to make
sure Boost is installed before we configure Eigen.
* Add `DEPENDS dep_Boost dep_GMP dep_MPFR` to deps/Eigen.
It turns out Eigen can also use GMP and MPFR for multi-precision and
multi-precision-rounded numeric types if they are available.
Again, I don't think we are using these so it doesn't really matter, but it is
technically correct and ensures they are there if we ever do need them.
* Fix deps DEPENDENCY ordering for GMP, MPFR, Eigen, and CGAL.
I think this is finally correct. Apparently CGAL also optionally depends on
Eigen, so the correct dependency order from lowest to highest is GMP, MPFR, Eigen, and CGAL.
---------
Co-authored-by: Donovan Baarda <dbaarda@google.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
With this change, builds on ARM64 hosts will successfully kick off!
Unfortunately there are still missing/outdated dependencies, so the build doesn't yet succeed. This makes it much easier to check what we're failing on though.
* deps: Use CMAKE_BUILD_PARALLEL_LEVEL for dependency builds.
If set when initial CMake is run, don't hard-code the number of CPUs for all the
recursive child builds.
* build_linux: Pass -j1 for dependency build.
This is recommended by the comment at the top of deps/CMakeLists.txt, and makes
sense as the recursive build steps will pick up
CMAKE_BUILD_PARALLEL_LEVEL (otherwise the number of parallel jobs is squared).
Defaults to ignore:
/opt/local (MacPorts)
/opt/homebrew (Homebrew on ARM)
/opt/local (Homebrew on x86)
We want to ignore these paths so any dependencies they might contain don't interfere with the build.
This fixes https://github.com/OrcaSlicer/OrcaSlicer/issues/10460
* Fix GIT_COMMIT_HASH not set in Flatpak builds
The env var check was gated inside the .git directory check, so
Flatpak builds (which exclude .git from the sandbox) always fell
back to "0000000". Lift the env var check to top level and inject
the commit hash into the Flatpak manifest via build-options.env.
* Switch Flatpak build to Clang/LLD via LLVM 21 SDK extension
- Add org.freedesktop.Sdk.Extension.llvm21
- Bump runtime to GNOME 49 (SDK 25.08) for llvm21 availability
* fix build errors and improving build speed for flatpak
* fxi more build errors
* Update error messages for GNOME Platform and SDK versions
* Add read support for Google's Draco (.drc) format.
* Fix build on Linux
* Use boost instead of fstat.
* Switch to boost memory-mapped file to save RAM and potentially improve performance.
* Trim trailing whitespace.
* Initial Draco write support.
Currently always exports with 16-bit precision and speed 0 (best compression).
The back-end function does have arguments to specify them, it's just not hooked into the GUI.
* Add Draco to the About dialogue.
* Fix Linux compile (hopefully)
* Add an option to associate DRC files on Windows.
* Implement a Preferences option to set Draco position quantization bits
* Update src/slic3r/GUI/Preferences.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Some slight changes to ianalexis's suggestion.
* Implement a create_item_spinctrl() function for numeric inputs, and use that instead of create_item_input().
* Move "bits" to inside the spinctrl box.
* Refactor following yw4z's feedback
* Update src/slic3r/GUI/Preferences.cpp
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Change to 0 bits as the default setting for Draco export precision.
* Change to a lossy checkbox and a bits field with a range of 8-30.
* Proper SpinInput code from yw4z
* Revert "Proper SpinInput code from yw4z"
This reverts commit 7e9c85f31a.
* Revert "Change to a lossy checkbox and a bits field with a range of 8-30."
This reverts commit d642c9bcc0.
* Redo preferences based on SoftFever's feedback
* Refactor to minimize code duplication
* Fix padding
* Improve Draco export quality level tooltip clarity
Clarify that 0 means lossless compression (not uncompressed),
document the valid lossy range (8-30), and better explain the
tradeoff between file size and geometric detail.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
* Auto generate CMAKE_PREFIX_PATH/DESTDIR
* Auto set CMAKE_INSTALL_PREFIX
* Always default SLIC3R_STATIC to on
* Only allow one value for CMAKE_OSX_ARCHITECTURES
* Set arch for OpenSSL from CMAKE_OSX_ARCHITECTURES
* Set CMAKE_INSTALL_RPATH from CMAKE_PREFIX_PATH
* Default CMAKE_MACOSX_RPATH and CMAKE_MACOSX_BUNDLE to on
* Auto set BBL_RELEASE_TO_PUBLIC based on build config
* Default to GTK 3
* Fix linux debug build
Update find modules to also look for the debug variant of the libraries
* Set DEP_DEBUG and ORCA_INCLUDE_DEBUG_INFO based on CMAKE_BUILD_TYPE
* Add a fallback value for Windows SDK if the env variables are not set
* Reflect CMake changes in the build scripts
* Add missing line
* Fix auto setting DEP_DEBUG and ORCA_INCLUDE_DEBUG_INFO
* Update dep folder name for linux in GH actions
* Invert dep-folder-name conditions
`''` is considered a falsy value, which was causing the value to always be set to 'OrcaSlicer_dep'
* Properly handle finding the debug version of libnoise
* Convert FindNLopt.cmake to a config mode wrapper
* Use separate build directory for debug builds on Linux
* Move find_package for libnoise
* Cleanup and improve linux build script
- Add dry run
- Add build in RelWithDebInfo
- Add function to print and run commands
* Remove linux destdir deprecation and cleanup
* Fix flatpak build
* Disable fail fast for flatpak builds
* Flatpak improvements
- Build wxWidgets using deps cmake
- Improve handling of space freeing commands while building deps
- Allow cmake to directly download deps
- Set needed flags within cmake instead of the build manifest
* Print clean build commands
* Implement shellcheck recommendations
* Cleanup
* Fix CMakeLists.txt syntax by replacing empty elseif with else statement
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Fix OCCT and OpenCV patching during build
The inclusion of the `--directory` flag here isn't necessary because of
how `PATCH_COMMAND` applies patches. In fact this causes issues when
trying to build from an archive, `--directory` seems to imply `--index`
and thus this patch only succeeds if you're inside an initialized git
repo. If you simply use the archive without a git repo the build fails
at the patch step.
* Alter patch command based on git repo status
`git apply` has different behavior when inside a git repo vs not. If
we're in a git repo we need to fully quality the path for these patches,
otherwise we can omit the directory flag.
---------
Co-authored-by: Joe Palazzolo <joe@joepalazzolo.net>
* Add support for perlin noise fuzzy skin
* Support multiple types of coherent noise
* Updated tooltips for more clarity.
* Reorder options as suggested by @discip
* Fix accidental removal of &
* Move libnoise to deps
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Initial commit for the builder
* fix wx, use hack to install into /app
* add some workarounds for /usr/local
* fix up rest of paths
* attempt to fix wxwebview undef
* figure out why wxwidgets isnt getting its patches applied
* do "proper" patching of wxwidgets
* Flip the flag
* actually append the /usr/local
* restrict package finding to flatpak only
* Update the destdir stuff for mpfr, gmp
* Transfer over all the _destdir, again
* update patch command for all other plats
* initial ci check
* what even happened
* clear ci image
* I doubt this will do anything
* do cleanup after running each step
* remove build objects for flatpak ci
* compress debug info
* Fix MacOS build
* Try saving space after building deps
* No debug info for now
* Do debug info, use thin static archives
* use BSD flag, not --thin
* try building with lto
* Use release, no debug info
* remove lto
* Revert the last 5 commits
* It might require write perms
* Revert "It might require write perms"
This reverts commit 44cec58a57.
* Import fixes for merge
* remove some patch stuff
* the worst hack!
* remove uneeded patches
* Initial commit for the builder
* note to self, go back to regular wx
* attempt to fix wxwebview undef
* do "proper" patching of wxwidgets
* update patch command for all other plats
* what even happened
* -ldep_name-NOTFOUND is still here
* concat patches
* Build wx with flatpak
* more wx shenatigans
* fix a missing import
* build wx with proper flags
* fix imports and libs
* trigger ci
* try fixing mac and windows ci
* remove duplicate definition of freetype
* curl may not have openssl for a dep
* has openssl been found?
* force building
* build images on apple
* cleanup for review
* cleanup cmake files
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* fix assert statements
* Add ORCA_INCLUDE_DEBUG_INFO to deps cmake
adds option ORCA_INCLUDE_DEBUG_INFO to deps build script to allow an alternative for RelWithDebInfo that works on windows
* add build type option to windows script
* update .gitignore to include build*
* Upgrade wxWidgets to 3.2.1
Based on prusa3d/PrusaSlicer@9a7e024
Co-authored-by: tamasmeszaros <meszaros.q@gmail.com>
* Implement BitmapCache
* update wxExtensions while keeping legacy items
* update dc.DrawBitmap calls to use get_bitmap
* Fix GetSize/Width/Height calls
* update BitmapComboBox
* fix ifndef in wxExtensions.hpp
* update my todos to OcraftyoneTODO
* Get to a compilable state
Everything seems to be working (including the plater). I am not seeing any graphical issues
* fix extruder color icons
* fix crash on opening support tab
* remove GetBmpSize method from DropDown.cpp
* Update TextInput to use bitmap bundles
* update a TODO after testing
* fix the rendering of the icons on combobox
* fix a few todos
* fix WipeTowerDialog.cpp
* Overhaul WipeTowerDialog
Removed simple version of the dialog since BBS removed the functionality but left the code.
Center the table (only seen when the table is smaller than the minimum size of the dialog)
Fix issue where editing a value causes the m_min_flush_label to change colors slightly
Fix an issue where changing a value or running an auto calc changes the disabled value from "-" to "0"
* update a few todos
* Update some todos
* Show dropdown when editing is started
* Update NanoSVG.cmake
Update NanoSVG to work with PR #2780
* Dim the icon on ComboBox when disabled
* solve ObjectDataViewModel todos
leaving colPrint and colEditing cases alone as it does not seem to impact anything
* Update names in wxExtensions
-Rename msw_rescale to sys_color_changed
-Replace GetBmpSize, GetBmpWidth, GetBmpHeight with renamed version (same name without "Bmp")
Both of these changes were also made by PrusaSlicer.
Original Commit: Prusa3D/PrusaSlicer@066b567
Co-authored-by: YuSanka <yusanka@gmail.com>
* update BitmapCache::from_svg
disable finding bundle in the cache to match load_svg
update to match values used in load_svg
* Update ScalableButton
change the signature and remove functions/vars pertaining to a default bmp
fix TODOs in ScalableButton
Original Commit: Prusa3D/PrusaSlicer@066b567
Co-authored-by: YuSanka <yusanka@gmail.com>
* fix up some more todos in wxExtensions
* update ScalableBitmap to use bmp bundles
use wxBitmapBundle by default
add flag to use old scaled bitmap function (specifically to solve issue with advanced toggle)
* attempt to fix macos deps build
* fix ubuntu build
* Revert "attempt to fix macos deps build"
Mistakenly made change to wrong file
This reverts commit d9c20b5121.
* update wxWidgets patch
an attempt to fix macOS build
* Remove duplicate variable from OrcaSlicer.cpp
* Fix macOS build issue
* Fix blank DataViewItem being added to objects list
* Filament ComboBox editor updates
-Add show drop down feature to ObjectTable
-Call finish editing when ComboBox is closed in ObjectList
* remove Apple specific declarations missed during refactor
* delete old wxWidgets patch
* fix ubuntu seg fault
* include patch from #2926
* update patch to include wxWidgets/wxWidgets@991a74c
* fix deps not compiling on Windows
* update WipeTowerDialog
relocates the recalculate button back to its previous position
changes the wording of the tip message label
add spacing below the matrix
* finish patching wxWidgets
from prusa3d/PrusaSlicer@f8477d1 and prusa3d/PrusaSlicer@066b567
Co-authored-by: YuSanka <yusanka@gmail.com>
* fix combobox crash
* revert outside plate changes
---------
Co-authored-by: tamasmeszaros <meszaros.q@gmail.com>
Co-authored-by: YuSanka <yusanka@gmail.com>
Kris Austin