* Improve initial layer speed documentation
Expanded explanations for initial layer speed settings, including benefits of slower first layers, detailed descriptions for each speed parameter, and added an illustrative image for the 'number of slow layers' setting.
* Update Volumetric speed calib + images
* Update speed_settings_other_layers_speed.md
* Improved MVFS descriptions
Co-Authored-By: dewi-ny-je <2866139+dewi-ny-je@users.noreply.github.com>
Co-Authored-By: MxBrnr <142743732+mxbrnr@users.noreply.github.com>
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* Clarify bed temperature effects
* MVF images from 14 to 19
To match description
* Update temp-calib.md
* Expand and clarify temperature calibration guide
Added a standard temperature ranges table for common 3D printing materials, clarified and expanded sections on bed and chamber temperature, and improved formatting and tips for optimal print quality.
Co-Authored-By: dewi-ny-je <2866139+dewi-ny-je@users.noreply.github.com>
* Update links for acceleration and jerk settings
* Small perimeters
* Update speed_settings_other_layers_speed.md
* Add reference to ironing speed settings
* Update overhang speed
* Add travel speed illustration
* Update avoid crossing
* Update speed_settings_acceleration.md
* Update speed_settings_overhang_speed.md
* Update speed_settings_acceleration.md
* Update speed_settings_jerk_xy.md
* Update speed_settings_jerk_xy.md
* Update ERS documentation and replace images with PNGs
* Seam Aligned Back
* Copilot FIX
Co-Authored-By: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: dewi-ny-je <2866139+dewi-ny-je@users.noreply.github.com>
Co-authored-by: MxBrnr <142743732+mxbrnr@users.noreply.github.com>
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* BASE
* precise wall and z moved
* PolyHoles
* Arc-fitting
* X-Y Compensation
* Elephant foot + moved images
* Update quality_settings_precision.md
* Wall generator and more
* Full Reorder
* TPMS-D bases
* Update strength_settings_infill.md
* Image Fix + Infill desc calculator
* Descriptions + image fix
Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>
* Update cornering-calib.md
* minor fixes
* Wip updated
* Missing fills
* Update infill_desc_calculator.xlsx
* Update infill_desc_calculator.xlsx
* Update infill documentation and images
Removed outdated 'iso' infill images and updated 'top' infill images with new versions. Added new images for adaptive cubic and 2D honeycomb infill patterns. Updated strength_settings_infill.md to revise infill strength values, descriptions, and remove references to deleted images. Introduced documentation for 2D honeycomb infill and made minor corrections and clarifications throughout.
* Revise infill pattern documentation and add comparison table
Updated strength_settings_infill.md to clarify infill density calculation, add a comprehensive comparison table of infill patterns, and standardize terminology for strength and print time. Expanded pattern descriptions to use qualitative strength ratings instead of numeric values. Updated infill_desc_calculator.xlsx to reflect these changes.
* Indentation in code examples
Adjusted the indentation of code blocks in the cornering calibration documentation for clarity and consistency with the rest of the document.
* Update 3D Honeycomb infill strength ratings
Adjusted the horizontal strength rating for 3D Honeycomb infill from 'Normal' to 'Normal-High' in the strength settings documentation and table. Updated the infill_desc_calculator.xlsx file to reflect these changes.
* Formatting and fix in ERS documentation
Updated headings to use consistent Markdown syntax, improved clarity in explanations, and reworded references for better readability.
* Fix wall generator doc link and filename
Updated the Home.md to reference the correct 'quality_settings_wall_generator' section and renamed the corresponding documentation file for consistency.
---------
Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
