Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
The IDEX profiles for Ratrig v-core 4.0 printers where only working for the 0.4 mm nozzle. I suppose these changes should fix it. I only asked copilot about it, so not tested if that is the reason why I cannot select a second filament with the bigger nozzle profiles.
* Update 0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.4.json
it's HYBRID not HYBIRD
* Update 0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.5.json
it's HYBRID not HYBIRD
* Update 0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.6.json
it's HYBRID not HYBIRD
* Add files via upload
Adding process files for the 0.8 nozzle
* Add files via upload
machine profiles for 0.8 nozzle
* Update Ratrig.json
Added support for 0.8.nozle
* Add files via upload
Added filament profile for the more and more popular PCTG
* Update Ratrig.json
Add filament PCTG
* Update Ratrig.json
Filament setting for big (>0.4) nozzles
* Add files via upload
Filament setting for big (>0.4) nozzles
* Filament setting for big (>0.4) nozzles
Filament setting for big (>0.4) nozzles
* Optimized layer and extrusion values
Optimized layer and extrusion values
* New set of profiles for RatRig V-Core 4 - 400 IDEX
New developed set of profiles for RatRig V-Core 4 - 400 IDEX with virtual copy and mirror printers (with appropriate smaller build plates and idex commands)
* New set of profiles for RatRig V-Core 4 - 400 IDEX
New developed set of profiles for RatRig V-Core 4 - 400 IDEX with virtual copy and mirror printers (with appropriate smaller build plates and idex commands)
* New set of profiles for RatRig V-Core 4 - 400 IDEX
New developed set of profiles for RatRig V-Core 4 - 400 IDEX with virtual copy and mirror printers (with appropriate smaller build plates and idex commands)
* Profiles V-Core4 IDEX 300 + 500
Added profiles for Ratrig V-Core4 IDEX bedsize 300 and 500
* Profiles V-Core4 IDEX 300 + 500
Added profiles for Ratrig V-Core4 IDEX bedsize 300 and 500
* Complete profile sets for V-Core 4 - IDEX
Now the profile sets for V-Core 4 IDEX - size 300+400+500, all with copy and mirror mode, are completed.
(profiles are tested in real prints for V-Core 4 IDEX 400 including copy and mirror, 300+500 only calculated)
* Complete profile sets for V-Core 4 - IDEX
Now the profile sets for V-Core 4 IDEX - size 300+400+500, all with copy and mirror mode, are completed.
(profiles are tested in real prints for V-Core 4 IDEX 400 including copy and mirror, 300+500 only calculated)
* Updated Filament for large nozzles (>=0.6)
Added missing TPU for big nozzles
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Update 0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.4.json
it's HYBRID not HYBIRD
* Update 0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.5.json
it's HYBRID not HYBIRD
* Update 0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.6.json
it's HYBRID not HYBIRD
* Add files via upload
Adding process files for the 0.8 nozzle
* Add files via upload
machine profiles for 0.8 nozzle
* Update Ratrig.json
Added support for 0.8.nozle
* Add files via upload
Added filament profile for the more and more popular PCTG
* Update Ratrig.json
Add filament PCTG
* Update Ratrig.json
Filament setting for big (>0.4) nozzles
* Add files via upload
Filament setting for big (>0.4) nozzles
* Filament setting for big (>0.4) nozzles
Filament setting for big (>0.4) nozzles
* Optimized layer and extrusion values
Optimized layer and extrusion values
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
1. Change default ensure_vertical_shell_thickness value back to ensure_all as suggested by @igiannakas
2. Change default sparse_infill_pattern vaule to ipCrossHatch
* RatRig machines which use Klipper don't use M601 but "PAUSE" for pause command
RatRig machines which use Klipper don't use M601 but "PAUSE" for pause command
