The reported defect: sketch dimension labels are "not editable" — you draw a
rectangle, its Width field opens, you type, and the as-drawn number is committed
instead. It affects every sketch tool, not just the rounded rectangle.
WHAT THIS ADDS
1. The arbiter (DesignPanel CHAR_HOOK -> DesignCanvas::inline_type_char ->
SketchInlineEditor::type_char). Routes a key by what it IS, not by who the
window manager focused: digits, sign, decimal separator and Backspace/Delete
go to the open value field, Enter/Tab commit, letters stay tool shortcuts.
This is FreeCAD Sketcher's rule (DrawSketchKeyboardManager::
detectKeyboardEventHandlingMode), and the reason its sketcher behaves the same
on every desktop: it never asks who has focus.
2. The [UX] trace (SNAPORCA_UXTRACE) in SketchInlineEditor: open/commit/refused/
cancel, with the prefill and what the control actually held at Enter. It did
not exist — the ladder below was written against a surface no build emitted,
so it could only ever report "nothing opened". typed == prefill on a commit is
the defect's signature and nothing else makes it visible.
3. A draw-then-edit trace in DesignSketchTool: four early returns can swallow the
value-field chain and from outside they are indistinguishable.
4. scripts/CAD/check-gui-click-edit.py — types WITHOUT clicking the field, as a
person does, across Line/Rectangle/Circle/Slot/Polygon/Ellipse/Arc plus label
click-to-edit, and asserts committed == typed != prefill.
5. scripts/CAD/focus-loop.sh — sync/build/assert on behemoth. NOT the orcacad-gui
rig: its image pins deps 216 non-CAD files behind cad-mainline, so today's CAD
sources cannot build there without a deps rebuild.
WHAT IS PROVEN, AND WHAT IS NOT
Green under openbox: 28 checks, every tool, committed == typed != prefill.
But openbox CANNOT adjudicate this bug and the ladder says so in place. There the
field always wins the keyboard, so the same ladder also passes against a binary
with the arbiter compiled out — measured twice. Two ways of removing the keyboard
were tried and both are recorded as dead ends: XSetInputFocus loses to the field's
own re-focus CallAfter, and XSendEvent (xdotool --window) is dropped by GTK, which
made every run red regardless of the code.
Under metacity — same focus-stealing-prevention lineage as the user's mutter — the
mechanism appears in the WM's own log:
Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0
That is the activation being refused, which is exactly the reported symptom.
present_toplevel() already asks for a server timestamp, so a path is still falling
through to frame->Raise(), which sends time 0. That is the next thing to fix, and
it is tracked; the arbiter alone does not close it. metacity also aborts on this
window (frames.c:1239), so the gate needs a WM that survives before it can return
a verdict.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
"Still cannot edit labels in rounded rectangles." Reproduced on the rig in a few minutes, and it
is NOT the window-manager defect the rest of this week has been about — it happens on openbox,
where typing into a value field works perfectly. The value was never the problem. The LABEL was
not there.
render_live_quotes picks the entity to speak for like this:
else if (m_selection.size() == 1) ei = m_selection[0];
if (ei < 0 || ...) return;
A rounded rectangle is EIGHT entities — four lines and four arcs — so selecting the shape makes
m_selection.size() == 8 and the pass returns before drawing anything. Its Width, Height and fillet
Radius are live labels and nothing else, so with them gone there is no affordance at all: no
number to click, no field to open, no value to refuse. The rule hid the characteristic quotes for
precisely the shapes that have nothing but characteristic quotes.
A plain rectangle looked fine only by accident. Typing into its auto-edit chain creates a DRIVEN
dimension, which render_dimensions draws from the annotation list, so its labels survive. The
rounded rect's W/H/R go through set_rounded_rect, which rebuilds the geometry and leaves no
annotation behind. Same for slot, arc-slot and polygon: every grouped feature was in this hole.
A selection that is entirely ONE feature now speaks through any member. The switch below already
keys off feature_of(ei) rather than the entity, so nothing else had to change.
Measured on behemoth :10, before and after, same binary path:
before 8 selected -> no labels at all
after 8 selected -> R26.6 / 117.4 / 150.7 drawn; clicking R26.6 opens Radius prefilled 26.60;
typing 8 gives R8.0 mm and visibly sharper corners.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
# Description
Under `core.autocrlf=input`, a Windows dependency build fails while
building CPython:
```
The system cannot find the batch label specified - begin_search
Cannot locate python.exe on PATH or as PYTHON variable
error MSB8066: ... exited with code 3
```
`git apply` inherits the caller's git configuration, so it rewrites the
patched `PCbuild/find_python.bat` to LF, and `cmd.exe` cannot resolve
`goto` labels in an LF batch file. `git init` already runs in the
extracted source, so setting `core.autocrlf` on that repository fixes it
and leaves the shared `PATCH_CMD` alone.
Only python3 is affected, its patch being the only one under `deps/`
that touches a `.bat`. `core.autocrlf=true` (the Git for Windows
default) and `false`/unset were never affected.
If a dependency build later fails with `patch does not apply`, delete
`deps/build` and rebuild. `git apply` is not idempotent, and that is
independent of this change.
## Tests
Visual Studio 2026 (18.6.3), `core.autocrlf=input`, built from an empty
`deps/build-dbg`:
| `deps debug` on | `find_python.bat` | CPython |
|---|---|---|
| `upstream/main` | 0 CRLF / 95 LF | fails at `begin_search` |
| this branch | 94 CRLF / 1 LF | builds |
It then stops at the debug staging step, a separate bug fixed by #15353;
with both applied it installs `libpython`. I hit this on a debug build,
but the patch step has no Debug/Release conditional.
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
Two reports, three defects, all three measured on the running app rather than reasoned about.
"Keyboard focus in drawing tool is broken so that now they are slow and cumbersome." After a
dimensioned entity the bottom-right readout chip — 119x31, borderless, a wxFrame — held the X
input focus. Pressing r produced NO [KEYTRACE] line at all: the key never reached the panel's
CHAR_HOOK. One bare canvas click moved focus back to the main window and the identical key armed
the tool. So every shortcut was dead after every dimension, and the way to get the keyboard back
was to click somewhere harmless. That is the whole of "slow and cumbersome".
Its sibling, the status chip, is a wxPopupWindow for exactly this reason and carries a comment
warning against turning it back into a frame. The readout was left a frame on the premise that
"it appears mid-gesture and the next input is the mouse" — which the measurement falsifies: the
chip keeps the last value on screen after the gesture ends, and a frame that has the focus does
not give it back. It is now a popup too, with the placement and the iconise/deactivate lifecycle
its sibling already needed, because an override-redirect window would otherwise sit on the bare
desktop when the app is minimised.
"Planes hide the bed." Literally true, twice over. The reference planes were half-extent 0.6 *
the bed's larger side — a square 1.2x the plate — and all three are drawn with depth testing
off, so they painted over the plate grid from edge to edge. 0.3 puts them inside the bed, which
is also the Onshape look the size was reaching for: a modest square at the origin, not a
tablecloth.
And the other half was mine. 3f52166e32 muted the bed for the duration of a sketch, on the
argument that a plate grid and a sketch grid are the same visual language. The argument is right
and the call was wrong, because there IS no sketch grid to take over. Pick XY, arm Line, and the
viewport was an empty grey field: no bed, no grid, no origin, nothing to judge a length or a
direction against. The plate grid was carrying the ground reference for the whole tab. The banner
already says where you are; taking the floor away as well only made the sketch harder to draw.
The Bed checkbox is the one thing that governs the bed, in every mode.
Verified on behemoth :10 with the rebuilt binary: focus after a dimension chain is the main
window, r arms Rectangle with no click in between, and the plate grid is under the sketch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
Measured on the running app, not deduced. After a queued dimension chain the value field's frame
is left MAPPED on purpose (mutter refuses keyboard focus to a re-mapped window), so there is a
window in which m_open is already false and the frame is still on screen holding the X input
focus. GTK meanwhile reports that window inactive and routes nothing into the text control. Every
key then lands somewhere that cannot use it and will not give it back:
[KEYTRACE] key=27 ui_mode=1 inline_busy=0 <- the last key the panel ever sees
=== MARK press Delete === <- no trace line at all
xdotool getwindowfocus -> 0xe00404 86x60 <- the value field, still mapped
Delete, Esc and typing all read as dead, which is exactly the report. And nothing could recover
it: close(), cancel() and do_cancel() all return early on !m_open, so the one window still
receiving keystrokes was also the one window no code could dismiss.
is_mapped() asks the question the flag cannot answer, and dismiss() tears the frame down with no
m_open guard, since m_open is precisely what lies in this state. Esc inside the field falls back
to it — while the frame holds focus that handler is the only code the keyboard can still reach,
so if it refuses, nothing else gets a turn. Every close now hands focus back to the canvas
explicitly, because hiding a window does not move the X input focus off it. And inline_busy()
reports the union of "a value is pending" and "a frame is mapped", so Esc routes to the field
whenever one is on screen at all.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
Three cues, because one is missed. A teal banner across the top of the viewport names the session
("Editing: Sketch N") and where its exits are; the printer bed is muted for the duration, since a
plate grid and a sketch grid are the same visual language and reading one as the other is how a
sketch gets drawn against the wrong reference; and N looks straight down the plane normal at the
current zoom, with the plane's own y axis as up, because no hand-orbit lands exactly square and a
sketch read at an angle is one whose right angles do not look like right angles.
The banner is an INDICATOR. Finish and Cancel stay on the single ribbon action bar — the tab had
three competing confirm surfaces once and that is not being reopened for a strip of colour. It
sits above the canvas rather than floating inside it: a child window over a wxGLCanvas is a native
window on GTK with no reliable stacking over GL, and being unmissable beats being clever.
The bed checkbox stays the stored preference and is restored on leaving the sketch; ticking it
mid-sketch still shows the bed, because that is a deliberate act and this is only a default.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
Two presses used to discard a live sketch. The key was answered in four places that could not
see each other — the inline value field, a sketch branch, a feature-card branch, and the canvas
— so a press aimed at one fell through to the next, and request_exit() carried a fourth layer
that deliberately let the SECOND consecutive press through to cancel_sketch(). The warning it
showed first did not help: the two presses are never one decision, the first is aimed at a field
or a tool and the second at whatever was underneath it.
The stack is now explicit. CadLevel (DesignInteraction.hpp) is four levels deep, the enum value
IS the LIFO depth, and cad_escape_level() is a constexpr function over a POD of four booleans —
so the ordering that is the entire contract is checked by static_assert at compile time, with no
window, GL context or event loop. DesignPanel::escape() acts on the one level escape_level()
names and on no other, and every Esc in the tab routes through it.
The destructive layer is gone from request_exit() itself rather than guarded at its callers, so
the guarantee cannot be re-opened by adding a route: a session holding geometry is left only
through Finish (keep) or Cancel (discard). Cancel now asks before discarding — it used to refuse
and tell the user to press the button they had just pressed, which meant a drawn sketch could be
kept but never thrown away.
Right-click also stops rewarding navigation with a menu: the offer needs BOTH budgets, released
within 200 ms and moved no more than 3 px, and the raycast uses the press position, so the menu
describes what was pointed at rather than where the camera stopped. Two budgets because drift
alone still popped a menu at the end of a slow, careful orbit.
docs/ux/interaction-model.md carries the state machine, the routing and the transition table.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
Five sites carried a hardcoded fallback for imex_tools_per_gantry that had
to match the value registered in print_config_def, with nothing enforcing
the agreement, and several explanatory comments miscounted the sites they
described or cited stale line numbers.
Add imex_cfg_int/_float/_bool/_enum<T> to IMEXHelpers, which return the
value registered for the key when it is absent from the config, so the
registration is the single source and there is nothing left to keep in
sync. Route every read of the IMEX geometry keys through them: 32 call
sites across IMEXZones, PartPlate, GCodeViewer and Tab. The only direct
lookup left is the bail in PartPlate::imex_multicolor_block_reason, which
must not default because it reports a routing conflict and a defaulted
grid would produce a false warning.
imex_cfg_enum uses dynamic_cast on both halves rather than the type()
comparison the others use: every ConfigOptionEnum<T> reports coEnum, so a
type() check cannot tell one enum type from another and would cast a
ConfigOptionEnum<OtherEnum> to the requested T. The ConfigOptionPercent :
ConfigOptionFloat inheritance that rules dynamic_cast out for the float
accessor has no analogue for enums.
Correct the comments that prompted this: the cache-key input list in
PartPlate named five inputs for a nine-part key, the ImexMarkerKey note
in GCodeViewer called imex_tool_layout an input only the preview reads
when the plate keys it too, and four file:line citations pointed at the
wrong lines. Values are unchanged at every converted site; cache key
strings keep their existing representation.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Fix incorrect early exit for CLI mode no-support preventing parameters from being read
* Use PartPlate's m_height to allow CLI to perform proper BuildVolume check
* Add safeguard against extruder_pintable_heights and extruder_areas vector size mismatch
* Preserve printable_height precision in PartPlate/PartPlateList
* Fixed multiple BuildVolume warning issue, and keep check_outside diff minimal
# Description
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
Part 1 of 3 of the CLI-mode bug sweep, split out of #15452 per review
feedback there. This PR contains the crash fixes.
## Fixes
- **`--outputdir`/`--datadir` with a missing parent directory aborted**
via unguarded `create_directory`. Directories are now created
recursively, with a graceful early exit and a specific error message if
creation fails.
- **`--slice` + `--export-3mf` segfaulted on a from-scratch slice**:
`ConfigOptionVector::get_at()` on an empty vector is `.front()` of an
empty vector (UB). Guards added for `filament_color`/`filament_id` at
the CLI call site, and inside `DynamicPrintConfig::get_filament_type`
for `filament_type`/`filament_is_support`/`filament_id`. Only *empty*
vectors are treated as missing — the existing clamp-to-front behavior
for merely out-of-range indices is preserved, so GUI callers are
unaffected.
- **OOB heap write from stale `filament_self_index` on
`--load-filaments`** (fixes#14181): a 3MF carrying more
`filament_self_index` entries than loaded filaments wrote past the end
of `old_variant_counts`. The guard validates both bounds — entries `>
filament_count` *and* non-positive entries (`< 1`), since a single `0`
in an otherwise-valid array indexes `old_variant_counts[-1]`.
- **Wrong printable-area check** for non-rectangular beds: use the
printable area's bounding box instead of a naive vertex calculation
(fixes#15363).
- **`nozzle_height` and `align_center` were not read into the arrange
config** in CLI mode.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
- Repro'd each crash on CLI before the fix; all resolved after.
- `tests/libslic3r` suite passes; full binary builds clean on Linux.
- Added `get_filament_type` unit tests
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The tree-wide length check (freed from its BBL/OFL carve-out last commit)
was flagging 21 pre-existing SeeMeCNC files that no vendor index references
and that therefore never load, turning CI red for files with no bearing on
what ships. The rule now only fires on presets a vendor's filament_list
actually references; every .json under the vendor's filament directory is
still parsed through the duplicate-key hook, so that coverage is unchanged.
Also removed a duplicated BAMBU_MAP_PATH definition: update_bambu_filament_ids.py
now imports the constant from assign_filament_ids.py, which it already imports
several other constants from, instead of recomputing the same path independently.
Every vendor's filament_id declarations, Bambu's own bundle included, are now
minted and checked the same way: the GF* catalog space is reserved but
ownerless, format is validated unconditionally with no snapshot or BBL
exemption, and both --remint and the default assign pass treat a non-OF
declaration as one needing a fresh mint (so a future BambuStudio sync
self-heals instead of needing a manual pass). A new check validates
resources/printers/bambu_filament_ids.json against the tree it describes:
that it parses, carries its header, keys only OF ids, maps each Bambu id once,
and agrees with the tree on every product it shares. The redundant BBL/OFL
carve-out in the profile checker's length check is dropped too, so it runs
the same way for every vendor.
The BBL bundle itself hasn't been touched yet and still declares its old GF
ids, so TestRealTree.test_shipped_snapshot_matches_tree is expected to fail
here (209 declarations flagged) until the next commit re-mints the bundle
onto OF ids.
scripts/update_bambu_filament_ids.py derives resources/printers/bambu_filament_ids.json
from BambuStudio's own shipped BBL bundle (cloned from upstream, or read from a local
checkout via --bambustudio-dir), pairing each Bambu catalog id with the Orca filament_id
we already ship for that product where we ship one, else a freshly generated one. Nothing
reads the map yet; later work uses it to translate ids at the Bambu printer boundary.
Resolves all 21 inline comments, plus six changes that altered behaviour for
users not using the feature and seven defects found alongside them.
The reviewer's central point generalised: a pressure-advance change had moved
every RepRapFirmware user onto an unverified command form. Auditing for that
class found five more — 14 config keys leaking into every exported g-code, an
ungated Moonraker sync writing to non-IMEX printers' presets, every slice
eagerly re-rendering all plate thumbnails, a preset delta-encoding regression,
and physical_extruder_map being normalised for printers that read it the other
way.
The structural asks landed as asked: the 392-line bed-zone geometry moved to
libslic3r and is now unit-tested, the preview consumes that same layout instead
of a second copy, nine open-coded mode lookups became one, and the modes editor
moved out of Tab.cpp. Making the geometry testable exposed three further
defects in it, including an aggregated gantry that raised no collision strip.
The worst bug was not in the review: the GUI computed the firmware-managed
slice offset in the plate-list world frame while both consumers subtracted the
plate origin again, so every plate after the first failed to slice with 'part
is off the plate'.
User-facing strings now read IDEX/IQEX, honouring 461c69c83e. Config keys, C++
identifiers and 3MF metadata keys keep the imex_ spelling as on-disk format.
815/815 tests pass in Release.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
No IMEX code upstream, so nothing in this merge touches the feature. All 21 overlapping
files auto-resolved; verified every upstream addition is present in the merged tree.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Reject invalid CLI argument values instead of silently accepting them
* Add read_cli accept/reject tests
* Update Option Type for LogFile argument
* Add read_cli vector option tests
* Accept common bool spellings on the CLI, cover --logfile in tests
* Add unit tests for truthy bool parsing
Refresh detach-from-parent checkbox state
Allow the detach checkbox toggle event to propagate to the custom CheckBox control so it refreshes its bitmap after the value changes.
Closes review comment 10.
`461c69c83e` settled this in April — IMEX internally, IDEX/IQEX as the user-facing label — but the
UI strings were never converted. Every translated string naming the feature now reads IDEX/IQEX:
41 occurrences across the printer and process option labels and tooltips, the modes editor, the
plate mode indicator, the pre-slice warnings, the placement refusals and the slicing errors. The
reviewer listed eight; the rest were in the same class.
Nothing else moves. The config keys keep the `imex_` spelling — `is_imex`, `imex_mode_names`,
`imex_parallel_mode` and the rest are on-disk format in existing printer presets and 3MF projects,
so renaming them would break every profile and project already saved. C++ identifiers, filenames,
comments and test names keep IMEX as well: it stays the internal name of the subsystem, which is
what covers the topology space (one gantry with 2-4 tools, 2x1 and 2x2 grids) that neither acronym
names on its own. Where a tooltip quotes a key, the key spelling is preserved and only the feature
word around it changed.
The `is_imex` tooltip is reworded rather than substituted: it already named the hardware families
parenthetically, so a literal replacement would have said IDEX/IQEX twice in one sentence.
No translation impact — no IMEX string had reached OrcaSlicer.pot or any catalogue, so there is
nothing to migrate. One test asserted on the old error text and now matches the new one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix: build_win.bat builds with whatever clang-cl is first on PATH
VsDevCmd appends the Visual Studio LLVM directory to the end of PATH, so
a standalone LLVM already on it shadows the Visual Studio one. -l -x
passed a bare clang-cl.exe for CMake to resolve, so the build ran on
whichever copy came first. For one reporter that was an LLVM 11, which
failed the compiler check before anything was compiled:
-- Check for working C compiler: C:/Program Files/LLVM/bin/clang-cl.exe - broken
lld-link: error: undefined symbol: __guard_eh_cont_table
The compiler is now resolved through vswhere and passed as a full path,
so PATH order no longer matters. CMake derives the linker from the
compiler directory, so lld-link follows. Only a configure passes it to
CMake, so -p and --no-configure resolve nothing and stay buildable on a
machine with no clang installed.
When Visual Studio has no clang toolset the script falls back to the
first clang-cl on PATH and names it. With none installed at all it now
errors with what to add, instead of failing later inside CMake. Every
clang-cl run that configures prints the compiler it resolved.
The suite gains a clang-cl fixture earlier on PATH than the Visual
Studio one, and an empty ProgramFiles(x86) to put vswhere out of reach,
which covers both fallbacks without touching the machine.
* fix: build_win.bat pointed at a solution file that is not there
The Visual Studio 2026 generator writes OrcaSlicer.slnx and the releases
before it OrcaSlicer.sln. The summary hard-coded the second, so the path
it printed after an MSVC build against 2026 was wrong.
Closes review comments 13, 14 and 15, and adds the test for a shipped-profile
regression that nothing guarded.
- 14 and 15: compute_imex_slice_offset had eight tests on the calculation and none
on the result, which is the whole firmware-managed path. test_imex_slice_offset
now covers the derivation end (which config produces a non-zero offset, and that
it is plate-local rather than moving with the plate origin -- the bug that
shifted every plate after the first) and the consumption end (emitted
coordinates and first_layer_print_min/max both move by the derived amount).
The first_layer case also cross-checks the two consumers against each other: the
declared bounds must keep the same relationship to the emitted toolpaths in both
frames, which fails if exactly one of them is shifted. It deliberately does not
pin the size of that gap -- it is 2.225 mm here, set by the wall generator, the
same with no offset at all, and pinning it would fail on an unrelated change.
- 13: nothing exercised the imex_mode / imex_mode_index / imex_mode_gcode
placeholders or the {global} flow into machine_start_gcode that their ordering
exists to guarantee. Seven cases now do, including the ordering itself -- the
mode script declares a global and machine_start_gcode reads it back, so moving
the mode processing later leaves the variable undefined and fails the export --
plus the inert cases (Primary mode, and a printer with the table filled in but
is_imex off). All matching is whole-line, because the config block the exporter
appends repeats machine_start_gcode verbatim and would make substring checks
meaningless.
- New: GCodeWriter passes this->config.is_imex.value into the heater remap, and
nothing tested that it passes the flag rather than a constant. Hardcode true
there and the whole suite stays green while fdm_bbl_3dp_002_common, which ships
physical_extruder_map [1,0], starts sending filament 0's M104/M109 to heater 1.
The new case runs a two-nozzle non-IMEX printer with that map and asserts each
filament's temperature reaches only its own tool. It uses idle_temperature via
ooze prevention rather than nozzle_temperature: keys in
filament_options_with_variant are re-indexed per filament by variant slot at
apply time, and this harness pins nozzle_diameter to one value, so every filament
resolves to the same slot and the temperatures stop telling the heads apart.
Also fixes two weaknesses in tests added earlier in this branch: an assertion that
would have been prefix-satisfied by the very routing it was meant to exclude, and
a whole-file command comparison between two slices, which this slicer's output is
not stable enough to support.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
