mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-12 02:11:39 +00:00
Merge upstream main (Bambu H2C/A2L multi-nozzle support) into IMEX branch
Conflicts were all co-located additions rather than design collisions: - GCode.cpp: adopt upstream's toolchange(filament_id, nozzle_id) signature and per-variant set_config_index() while keeping the IMEX bare-T<n> suppression; rebase the second-layer temperature loop's non-IMEX branch onto upstream's get_filament_config_index() resolution. - Preset.cpp / PresetBundle.cpp / PrintConfig.cpp: keep both sides' option-list and enum-map entries. - GLCanvas3D.cpp: upstream's printable_heights argument plus the IMEX ghost pass. - PartPlate.cpp: keep <set> (still used). - test_gcodewriter.cpp / test_3mf.cpp: keep both sides' test cases.
This commit is contained in:
Clifford Garwood
+188
-24
@@ -52,9 +52,12 @@ static std::vector<std::string> s_project_options {
|
||||
"wipe_tower_rotation_angle",
|
||||
"curr_bed_type",
|
||||
"flush_multiplier",
|
||||
// Fast-purge mode: project-level purge control, inert at Default.
|
||||
"flush_multiplier_fast",
|
||||
"prime_volume_mode",
|
||||
"nozzle_volume_type",
|
||||
"filament_map_mode",
|
||||
"filament_map"
|
||||
"filament_map",
|
||||
// physical_extruder_map intentionally NOT here: it's owned by the printer
|
||||
// preset (s_Preset_printer_options). Listing it project-scoped caused
|
||||
// project_config's default [0] to clobber the preset's authored value
|
||||
@@ -63,6 +66,17 @@ static std::vector<std::string> s_project_options {
|
||||
// preset on reload. MoonrakerPrinterAgent's runtime set_key_value still
|
||||
// works — it creates the option on project_config on demand without
|
||||
// needing it pre-initialized here.
|
||||
// Per-filament nozzle-volume choice; project-level like filament_map so the per-filament
|
||||
// slot resolution survives preset switches.
|
||||
"filament_volume_map",
|
||||
// Per-filament physical-nozzle choice the grouping engine writes back; project-level so a
|
||||
// saved project round-trips the assignment alongside filament_map/filament_volume_map.
|
||||
"filament_nozzle_map",
|
||||
// Filament Track Switch device state: whether the switch is installed and ready, and
|
||||
// whether dynamic per-nozzle filament mapping is active. Persisted with the project and
|
||||
// restored from a saved 3mf; reset to false on load and set true only by live device sync.
|
||||
"has_filament_switcher",
|
||||
"enable_filament_dynamic_map"
|
||||
};
|
||||
|
||||
//Orca: add custom as default
|
||||
@@ -79,7 +93,8 @@ DynamicPrintConfig PresetBundle::construct_full_config(
|
||||
const DynamicPrintConfig& project_config,
|
||||
std::vector<Preset>& in_filament_presets,
|
||||
bool apply_extruder,
|
||||
std::optional<std::vector<int>> filament_maps_new)
|
||||
std::optional<std::vector<int>> filament_maps_new,
|
||||
std::optional<std::vector<int>> filament_volume_maps_new)
|
||||
{
|
||||
DynamicPrintConfig &printer_config = in_printer_preset.config;
|
||||
DynamicPrintConfig &print_config = in_print_preset.config;
|
||||
@@ -94,12 +109,23 @@ DynamicPrintConfig PresetBundle::construct_full_config(
|
||||
size_t num_filaments = in_filament_presets.size();
|
||||
|
||||
std::vector<int> filament_maps = out.option<ConfigOptionInts>("filament_map")->values;
|
||||
std::vector<int> filament_volume_maps(num_filaments, (int)nvtStandard);
|
||||
|
||||
ConfigOptionInts* filament_volume_map_opt = out.option<ConfigOptionInts>("filament_volume_map");
|
||||
if (filament_maps_new.has_value())
|
||||
filament_maps = *filament_maps_new;
|
||||
if (filament_volume_maps_new.has_value())
|
||||
filament_volume_maps = *filament_volume_maps_new;
|
||||
else if (filament_volume_map_opt && filament_volume_map_opt->values.size() == num_filaments)
|
||||
filament_volume_maps = filament_volume_map_opt->values;
|
||||
|
||||
// in some middle state, they may be different
|
||||
if (filament_maps.size() != num_filaments) {
|
||||
filament_maps.resize(num_filaments, 1);
|
||||
}
|
||||
if (filament_volume_maps.size() != num_filaments) {
|
||||
filament_volume_maps.resize(num_filaments, nvtStandard);
|
||||
}
|
||||
|
||||
auto *extruder_diameter = dynamic_cast<const ConfigOptionFloats *>(out.option("nozzle_diameter"));
|
||||
// Collect the "compatible_printers_condition" and "inherits" values over all presets (print, filaments, printers) into a single vector.
|
||||
@@ -120,17 +146,34 @@ DynamicPrintConfig PresetBundle::construct_full_config(
|
||||
inherits.emplace_back(print_inherits);
|
||||
|
||||
// BBS: update printer config related with variants
|
||||
std::vector<std::vector<NozzleVolumeType>> nozzle_volume_types;
|
||||
int extruder_count = 1, extruder_volume_type_count = 1;
|
||||
bool different_extruder = false;
|
||||
if (apply_extruder) {
|
||||
out.update_values_to_printer_extruders(out, printer_options_with_variant_1, "printer_extruder_id", "printer_extruder_variant");
|
||||
out.update_values_to_printer_extruders(out, printer_options_with_variant_2, "printer_extruder_id", "printer_extruder_variant", 2);
|
||||
// update print config related with variants
|
||||
out.update_values_to_printer_extruders(out, print_options_with_variant, "print_extruder_id", "print_extruder_variant");
|
||||
different_extruder = out.support_different_extruders(extruder_count);
|
||||
extruder_volume_type_count = out.get_extruder_nozzle_volume_count(extruder_count, nozzle_volume_types);
|
||||
|
||||
if ((extruder_count > 1) || different_extruder) {
|
||||
// Orca: keep processing variant_1 before variant_2 here; variant_2 slots are resolved
|
||||
// against the printer id/variant lists as rewritten by the variant_1 pass, and the
|
||||
// composed values depend on that order. Note the order is load-bearing, not correct
|
||||
// in general: the variant_2 pass reads the original full-width arrays through indices
|
||||
// resolved on the shrunk lists, which mis-reads presets whose variant_2 columns differ
|
||||
// per variant (e.g. X2D machine_max_speed_e/machine_max_acceleration_e). The slicing
|
||||
// path composes variant_2 first and is unaffected; changing the order here would alter
|
||||
// long-standing composed values, so any fix must re-baseline them.
|
||||
out.update_values_to_printer_extruders(out, extruder_count, extruder_volume_type_count, nozzle_volume_types, printer_options_with_variant_1, "printer_extruder_id", "printer_extruder_variant");
|
||||
out.update_values_to_printer_extruders(out, extruder_count, extruder_volume_type_count, nozzle_volume_types, printer_options_with_variant_2, "printer_extruder_id", "printer_extruder_variant", 2);
|
||||
// update print config related with variants
|
||||
out.update_values_to_printer_extruders(out, extruder_count, extruder_volume_type_count, nozzle_volume_types, print_options_with_variant, "print_extruder_id", "print_extruder_variant");
|
||||
}
|
||||
}
|
||||
|
||||
if (num_filaments <= 1) {
|
||||
// BBS: update filament config related with variants
|
||||
DynamicPrintConfig filament_config = in_filament_presets[0].config;
|
||||
if (apply_extruder) filament_config.update_values_to_printer_extruders(out, filament_options_with_variant, "", "filament_extruder_variant", 1, filament_maps[0]);
|
||||
if (apply_extruder && ((extruder_count > 1) || different_extruder))
|
||||
filament_config.update_values_to_printer_extruders(out, extruder_count, extruder_volume_type_count, nozzle_volume_types, filament_options_with_variant, "", "filament_extruder_variant", 1, filament_maps[0], (NozzleVolumeType)filament_volume_maps[0]);
|
||||
out.apply(filament_config);
|
||||
compatible_printers_condition.emplace_back(in_filament_presets[0].compatible_printers_condition());
|
||||
compatible_prints_condition.emplace_back(in_filament_presets[0].compatible_prints_condition());
|
||||
@@ -153,8 +196,8 @@ DynamicPrintConfig PresetBundle::construct_full_config(
|
||||
filament_temp_configs.resize(num_filaments);
|
||||
for (size_t i = 0; i < num_filaments; ++i) {
|
||||
filament_temp_configs[i] = *(filament_configs[i]);
|
||||
if (apply_extruder)
|
||||
filament_temp_configs[i].update_values_to_printer_extruders(out, filament_options_with_variant, "", "filament_extruder_variant", 1, filament_maps[i]);
|
||||
if (apply_extruder && ((extruder_count > 1) || different_extruder))
|
||||
filament_temp_configs[i].update_values_to_printer_extruders(out, extruder_count, extruder_volume_type_count, nozzle_volume_types, filament_options_with_variant, "", "filament_extruder_variant", 1, filament_maps[i], (NozzleVolumeType)filament_volume_maps[i]);
|
||||
}
|
||||
|
||||
// loop through options and apply them to the resulting config.
|
||||
@@ -229,6 +272,7 @@ DynamicPrintConfig PresetBundle::construct_full_config(
|
||||
out.option<ConfigOptionString>("printer_settings_id", true)->value = in_printer_preset.name;
|
||||
out.option<ConfigOptionStrings>("filament_ids", true)->values = filament_ids;
|
||||
out.option<ConfigOptionInts>("filament_map", true)->values = filament_maps;
|
||||
out.option<ConfigOptionInts>("filament_volume_map", true)->values = filament_volume_maps;
|
||||
|
||||
auto add_if_some_non_empty = [&out](std::vector<std::string> &&values, const std::string &key) {
|
||||
bool nonempty = false;
|
||||
@@ -356,7 +400,7 @@ PresetBundle::PresetBundle()
|
||||
auto& default_config = this->filaments.default_preset().config;
|
||||
for(const std::string& opt_key : default_config.keys()){
|
||||
ConfigOption* opt = default_config.optptr(opt_key, false);
|
||||
bool is_override_key = std::find(filament_extruder_override_keys.begin(),filament_extruder_override_keys.end(), opt_key) != filament_extruder_override_keys.end();
|
||||
bool is_override_key = is_filament_extruder_override_key(opt_key);
|
||||
if(!is_override_key || !opt->nullable())
|
||||
continue;
|
||||
opt->deserialize("nil",ForwardCompatibilitySubstitutionRule::Disable);
|
||||
@@ -729,6 +773,8 @@ std::optional<FilamentBaseInfo> PresetBundle::get_filament_by_filament_id(const
|
||||
auto iter = std::find(compatible_printers.begin(), compatible_printers.end(), printer_name);
|
||||
if (iter != compatible_printers.end() && config.has("filament_printable")) {
|
||||
info.filament_printable = config.option<ConfigOptionInts>("filament_printable")->values[0];
|
||||
if (config.has("filament_extruder_compatibility"))
|
||||
info.set_filament_extruder_compatibility(config.option<ConfigOptionInts>("filament_extruder_compatibility")->values[0]);
|
||||
return info;
|
||||
}
|
||||
}
|
||||
@@ -2682,6 +2728,12 @@ void PresetBundle::update_selections(AppConfig &config)
|
||||
std::vector<int> filament_maps(filament_colors.size(), 1);
|
||||
project_config.option<ConfigOptionInts>("filament_map")->values = filament_maps;
|
||||
|
||||
std::vector<int> filament_nozzle_maps(filament_colors.size(), 0);
|
||||
project_config.option<ConfigOptionInts>("filament_nozzle_map")->values = filament_nozzle_maps;
|
||||
|
||||
std::vector<int> filament_volume_maps(filament_colors.size(), static_cast<int>(NozzleVolumeType::nvtStandard));
|
||||
project_config.option<ConfigOptionInts>("filament_volume_map")->values = filament_volume_maps;
|
||||
|
||||
std::vector<std::string> extruder_ams_count_str;
|
||||
if (config.has_printer_setting(initial_printer_profile_name, "extruder_ams_count")) {
|
||||
boost::algorithm::split(extruder_ams_count_str, config.get_printer_setting(initial_printer_profile_name, "extruder_ams_count"), boost::algorithm::is_any_of(","));
|
||||
@@ -2826,6 +2878,12 @@ void PresetBundle::load_selections(AppConfig &config, const PresetPreferences& p
|
||||
std::vector<int> filament_maps(filament_colors.size(), 1);
|
||||
project_config.option<ConfigOptionInts>("filament_map")->values = filament_maps;
|
||||
|
||||
std::vector<int> filament_nozzle_maps(filament_colors.size(), 0);
|
||||
project_config.option<ConfigOptionInts>("filament_nozzle_map")->values = filament_nozzle_maps;
|
||||
|
||||
std::vector<int> filament_volume_maps(filament_colors.size(), static_cast<int>(NozzleVolumeType::nvtStandard));
|
||||
project_config.option<ConfigOptionInts>("filament_volume_map")->values = filament_volume_maps;
|
||||
|
||||
std::vector<std::string> extruder_ams_count_str;
|
||||
if (config.has_printer_setting(initial_printer_profile_name, "extruder_ams_count")) {
|
||||
boost::algorithm::split(extruder_ams_count_str, config.get_printer_setting(initial_printer_profile_name, "extruder_ams_count"), boost::algorithm::is_any_of(","));
|
||||
@@ -3002,7 +3060,8 @@ void PresetBundle::set_num_filaments(unsigned int n, std::vector<std::string> ne
|
||||
ConfigOptionStrings *filament_multi_color = project_config.option<ConfigOptionStrings>("filament_multi_colour");
|
||||
ConfigOptionStrings* filament_color_type = project_config.option<ConfigOptionStrings>("filament_colour_type");
|
||||
ConfigOptionInts* filament_map = project_config.option<ConfigOptionInts>("filament_map");
|
||||
|
||||
ConfigOptionInts* filament_nozzle_map = project_config.option<ConfigOptionInts>("filament_nozzle_map");
|
||||
ConfigOptionInts* filament_volume_map = project_config.option<ConfigOptionInts>("filament_volume_map");
|
||||
|
||||
filament_color->resize(n);
|
||||
// Sync filament multi colour
|
||||
@@ -3012,6 +3071,8 @@ void PresetBundle::set_num_filaments(unsigned int n, std::vector<std::string> ne
|
||||
}
|
||||
filament_color_type->resize(n);
|
||||
filament_map->values.resize(n, 1);
|
||||
filament_nozzle_map->values.resize(n, 0);
|
||||
filament_volume_map->values.resize(n, static_cast<int>(NozzleVolumeType::nvtStandard));
|
||||
ams_multi_color_filment.resize(n);
|
||||
|
||||
// BBS set new filament color to new_color
|
||||
@@ -3039,7 +3100,8 @@ void PresetBundle::set_num_filaments(unsigned int n, std::string new_color)
|
||||
ConfigOptionStrings *filament_multi_color = project_config.option<ConfigOptionStrings>("filament_multi_colour");
|
||||
ConfigOptionStrings* filament_color_type = project_config.option<ConfigOptionStrings>("filament_colour_type");
|
||||
ConfigOptionInts* filament_map = project_config.option<ConfigOptionInts>("filament_map");
|
||||
|
||||
ConfigOptionInts* filament_nozzle_map = project_config.option<ConfigOptionInts>("filament_nozzle_map");
|
||||
ConfigOptionInts* filament_volume_map = project_config.option<ConfigOptionInts>("filament_volume_map");
|
||||
|
||||
filament_color->resize(n);
|
||||
// Sync filament multi colour
|
||||
@@ -3049,6 +3111,8 @@ void PresetBundle::set_num_filaments(unsigned int n, std::string new_color)
|
||||
}
|
||||
filament_color_type->resize(n);
|
||||
filament_map->values.resize(n, 1);
|
||||
filament_nozzle_map->values.resize(n, 0);
|
||||
filament_volume_map->values.resize(n, static_cast<int>(NozzleVolumeType::nvtStandard));
|
||||
ams_multi_color_filment.resize(n);
|
||||
|
||||
//BBS set new filament color to new_color
|
||||
@@ -3089,15 +3153,25 @@ void PresetBundle::update_num_filaments(unsigned int to_del_flament_id)
|
||||
ConfigOptionStrings *filament_multi_color = project_config.option<ConfigOptionStrings>("filament_multi_colour");
|
||||
ConfigOptionStrings *filament_color_type = project_config.option<ConfigOptionStrings>("filament_colour_type");
|
||||
ConfigOptionInts* filament_map = project_config.option<ConfigOptionInts>("filament_map");
|
||||
ConfigOptionInts* filament_nozzle_map = project_config.option<ConfigOptionInts>("filament_nozzle_map");
|
||||
ConfigOptionInts* filament_volume_map = project_config.option<ConfigOptionInts>("filament_volume_map");
|
||||
if (filament_color->values.size() > to_del_flament_id) {
|
||||
filament_color->values.erase(filament_color->values.begin() + to_del_flament_id);
|
||||
if (filament_map->values.size() > to_del_flament_id) {
|
||||
filament_map->values.erase(filament_map->values.begin() + to_del_flament_id);
|
||||
}
|
||||
if (filament_nozzle_map->values.size() > to_del_flament_id) {
|
||||
filament_nozzle_map->values.erase(filament_nozzle_map->values.begin() + to_del_flament_id);
|
||||
}
|
||||
if (filament_volume_map->values.size() > to_del_flament_id) {
|
||||
filament_volume_map->values.erase(filament_volume_map->values.begin() + to_del_flament_id);
|
||||
}
|
||||
}
|
||||
else {
|
||||
filament_color->values.resize(to_del_flament_id);
|
||||
filament_map->values.resize(to_del_flament_id, 1);
|
||||
filament_nozzle_map->values.resize(to_del_flament_id, 0);
|
||||
filament_volume_map->values.resize(to_del_flament_id, static_cast<int>(NozzleVolumeType::nvtStandard));
|
||||
}
|
||||
|
||||
// lambda function to erase or resize the container
|
||||
@@ -3320,6 +3394,7 @@ unsigned int PresetBundle::sync_ams_list(std::vector<std::pair<DynamicPrintConfi
|
||||
ConfigOptionStrings *filament_color = project_config.option<ConfigOptionStrings>("filament_colour");
|
||||
ConfigOptionStrings *filament_color_type = project_config.option<ConfigOptionStrings>("filament_colour_type");
|
||||
ConfigOptionInts * filament_map = project_config.option<ConfigOptionInts>("filament_map");
|
||||
ConfigOptionInts * filament_volume_map = project_config.option<ConfigOptionInts>("filament_volume_map");
|
||||
if (color_only) {
|
||||
auto get_map_index = [&ams_infos](const std::vector<AMSMapInfo> &infos, const AMSMapInfo &temp) {
|
||||
for (int i = 0; i < infos.size(); i++) {
|
||||
@@ -3501,6 +3576,7 @@ unsigned int PresetBundle::sync_ams_list(std::vector<std::pair<DynamicPrintConfi
|
||||
ams_multi_color_filment = exist_multi_color_filment;
|
||||
this->filament_presets = exist_filament_presets;
|
||||
filament_map->values.resize(exist_filament_presets.size(), 1);
|
||||
filament_volume_map->values.resize(exist_filament_presets.size(), static_cast<int>(NozzleVolumeType::nvtStandard));
|
||||
}
|
||||
else {//overwrite;
|
||||
bool has_placeholders = std::any_of(ams_infos.begin(), ams_infos.end(),
|
||||
@@ -3555,12 +3631,14 @@ unsigned int PresetBundle::sync_ams_list(std::vector<std::pair<DynamicPrintConfi
|
||||
this->filament_presets = result_presets;
|
||||
ams_multi_color_filment = result_multi_colors;
|
||||
filament_map->values.resize(total, 1);
|
||||
filament_volume_map->values.resize(total, static_cast<int>(NozzleVolumeType::nvtStandard));
|
||||
} else {
|
||||
// BBL: existing wholesale replace
|
||||
filament_color->values = ams_filament_colors;
|
||||
filament_color_type->values = ams_filament_color_types;
|
||||
this->filament_presets = ams_filament_presets;
|
||||
filament_map->values.resize(ams_filament_colors.size(), 1);
|
||||
filament_volume_map->values.resize(ams_filament_colors.size(), static_cast<int>(NozzleVolumeType::nvtStandard));
|
||||
}
|
||||
|
||||
auto& print_config = this->prints.get_edited_preset().config;
|
||||
@@ -3863,10 +3941,26 @@ bool PresetBundle::support_different_extruders() const
|
||||
return supported;
|
||||
}
|
||||
|
||||
DynamicPrintConfig PresetBundle::full_config(bool apply_extruder, std::optional<std::vector<int>>filament_maps) const
|
||||
std::vector<int> PresetBundle::get_default_nozzle_volume_types_for_filaments(std::vector<int>& f_maps)
|
||||
{
|
||||
std::vector<int> result;
|
||||
int filament_count = f_maps.size();
|
||||
result.resize(filament_count, static_cast<int>(NozzleVolumeType::nvtStandard));
|
||||
|
||||
auto opt_nozzle_volume_type = dynamic_cast<const ConfigOptionEnumsGeneric*>(this->project_config.option("nozzle_volume_type"));
|
||||
for (int index = 0; index < filament_count; index++)
|
||||
{
|
||||
if (opt_nozzle_volume_type && opt_nozzle_volume_type->values.size() > (f_maps[index] - 1))
|
||||
result[index] = opt_nozzle_volume_type->values[f_maps[index] - 1];
|
||||
}
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
DynamicPrintConfig PresetBundle::full_config(bool apply_extruder, std::optional<std::vector<int>>filament_maps, std::optional<std::vector<int>> filament_volume_maps) const
|
||||
{
|
||||
return (this->printers.get_edited_preset().printer_technology() == ptFFF) ?
|
||||
this->full_fff_config(apply_extruder, filament_maps) :
|
||||
this->full_fff_config(apply_extruder, filament_maps, filament_volume_maps) :
|
||||
this->full_sla_config();
|
||||
}
|
||||
|
||||
@@ -3880,16 +3974,52 @@ DynamicPrintConfig PresetBundle::full_config_secure(std::optional<std::vector<in
|
||||
config.erase("printhost_cafile");
|
||||
config.erase("printhost_user");
|
||||
config.erase("printhost_password");
|
||||
config.erase("printhost_port");
|
||||
config.erase("printhost_port");
|
||||
return config;
|
||||
}
|
||||
|
||||
std::vector<std::vector<std::vector<float>>> PresetBundle::get_full_flush_matrix(bool with_multiplier) const
|
||||
{
|
||||
auto full_config = this->full_config();
|
||||
int extruder_nums = full_config.option<ConfigOptionFloats>("nozzle_diameter")->values.size();
|
||||
std::vector<double> flush_volume_value = full_config.option<ConfigOptionFloats>("flush_volumes_matrix")->values;
|
||||
int filament_nums = full_config.option<ConfigOptionStrings>("filament_type")->values.size();
|
||||
|
||||
std::vector<std::vector<std::vector<float>>> matrix;
|
||||
for (size_t extruder_id = 0; extruder_id < extruder_nums; ++extruder_id) {
|
||||
std::vector<float> flush_matrix(cast<float>(get_flush_volumes_matrix(flush_volume_value, extruder_id, extruder_nums)));
|
||||
std::vector<std::vector<float>> wipe_volumes;
|
||||
for (unsigned int i = 0; i < filament_nums; ++i)
|
||||
wipe_volumes.push_back(std::vector<float>(flush_matrix.begin() + i * filament_nums, flush_matrix.begin() + (i + 1) * filament_nums));
|
||||
|
||||
matrix.emplace_back(wipe_volumes);
|
||||
}
|
||||
|
||||
if (with_multiplier) {
|
||||
// Fast purge mode uses flush_multiplier_fast; the default prime_volume_mode==Default
|
||||
// (or the key absent) reads flush_multiplier, so this is inert.
|
||||
auto* mode_opt = project_config.option<ConfigOptionEnum<PrimeVolumeMode>>("prime_volume_mode");
|
||||
const bool use_fast = mode_opt && mode_opt->value == PrimeVolumeMode::pvmFast;
|
||||
auto* mult_opt = project_config.option<ConfigOptionFloats>(use_fast ? "flush_multiplier_fast" : "flush_multiplier");
|
||||
auto flush_multiplies = mult_opt ? mult_opt->values : project_config.option<ConfigOptionFloats>("flush_multiplier")->values;
|
||||
flush_multiplies.resize(extruder_nums, 1);
|
||||
for (size_t extruder_id = 0; extruder_id < extruder_nums; ++extruder_id) {
|
||||
for (auto& vec : matrix[extruder_id]) {
|
||||
for (auto& v : vec)
|
||||
v *= flush_multiplies[extruder_id];
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
return matrix;
|
||||
}
|
||||
|
||||
const std::set<std::string> ignore_settings_list ={
|
||||
"inherits",
|
||||
"print_settings_id", "filament_settings_id", "printer_settings_id"
|
||||
};
|
||||
|
||||
DynamicPrintConfig PresetBundle::full_fff_config(bool apply_extruder, std::optional<std::vector<int>> filament_maps_new) const
|
||||
DynamicPrintConfig PresetBundle::full_fff_config(bool apply_extruder, std::optional<std::vector<int>> filament_maps_new, std::optional<std::vector<int>> filament_volume_maps_new) const
|
||||
{
|
||||
DynamicPrintConfig out;
|
||||
out.apply(FullPrintConfig::defaults());
|
||||
@@ -3903,8 +4033,17 @@ DynamicPrintConfig PresetBundle::full_fff_config(bool apply_extruder, std::optio
|
||||
size_t num_filaments = this->filament_presets.size();
|
||||
|
||||
std::vector<int> filament_maps = out.option<ConfigOptionInts>("filament_map")->values;
|
||||
std::vector<int> filament_volume_maps(num_filaments, (int)nvtStandard);
|
||||
|
||||
ConfigOptionInts* filament_volume_map_opt = out.option<ConfigOptionInts>("filament_volume_map");
|
||||
if (filament_maps_new.has_value())
|
||||
filament_maps = *filament_maps_new;
|
||||
if (filament_volume_maps_new.has_value()) {
|
||||
filament_volume_maps = *filament_volume_maps_new;
|
||||
out.option<ConfigOptionInts>("filament_volume_map", true)->values = filament_volume_maps;
|
||||
}
|
||||
else if (filament_volume_map_opt && filament_volume_map_opt->values.size() == num_filaments)
|
||||
filament_volume_maps = filament_volume_map_opt->values;
|
||||
//in some middle state, they may be different
|
||||
if (filament_maps.size() != num_filaments) {
|
||||
filament_maps.resize(num_filaments, 1);
|
||||
@@ -3912,6 +4051,9 @@ DynamicPrintConfig PresetBundle::full_fff_config(bool apply_extruder, std::optio
|
||||
else {
|
||||
assert(filament_maps.size() == num_filaments);
|
||||
}
|
||||
if (filament_volume_maps.size() != num_filaments) {
|
||||
filament_volume_maps.resize(num_filaments, nvtStandard);
|
||||
}
|
||||
|
||||
auto* extruder_diameter = dynamic_cast<const ConfigOptionFloats*>(out.option("nozzle_diameter"));
|
||||
// Collect the "compatible_printers_condition" and "inherits" values over all presets (print, filaments, printers) into a single vector.
|
||||
@@ -3941,18 +4083,34 @@ DynamicPrintConfig PresetBundle::full_fff_config(bool apply_extruder, std::optio
|
||||
different_settings.emplace_back(different_print_settings);
|
||||
|
||||
//BBS: update printer config related with variants
|
||||
std::vector<std::vector<NozzleVolumeType>> nozzle_volume_types;
|
||||
int extruder_count = 1, extruder_volume_type_count = 1;
|
||||
bool different_extruder = false;
|
||||
if (apply_extruder) {
|
||||
out.update_values_to_printer_extruders(out, printer_options_with_variant_1, "printer_extruder_id", "printer_extruder_variant");
|
||||
out.update_values_to_printer_extruders(out, printer_options_with_variant_2, "printer_extruder_id", "printer_extruder_variant", 2);
|
||||
//update print config related with variants
|
||||
out.update_values_to_printer_extruders(out, print_options_with_variant, "print_extruder_id", "print_extruder_variant");
|
||||
different_extruder = out.support_different_extruders(extruder_count);
|
||||
extruder_volume_type_count = out.get_extruder_nozzle_volume_count(extruder_count, nozzle_volume_types);
|
||||
|
||||
if ((extruder_count > 1) || different_extruder) {
|
||||
// Orca: keep processing variant_1 before variant_2 here; variant_2 slots are resolved
|
||||
// against the printer id/variant lists as rewritten by the variant_1 pass, and the
|
||||
// composed values depend on that order. Note the order is load-bearing, not correct
|
||||
// in general: the variant_2 pass reads the original full-width arrays through indices
|
||||
// resolved on the shrunk lists, which mis-reads presets whose variant_2 columns differ
|
||||
// per variant (e.g. X2D machine_max_speed_e/machine_max_acceleration_e). The slicing
|
||||
// path composes variant_2 first and is unaffected; changing the order here would alter
|
||||
// long-standing composed values, so any fix must re-baseline them.
|
||||
out.update_values_to_printer_extruders(out, extruder_count, extruder_volume_type_count, nozzle_volume_types, printer_options_with_variant_1, "printer_extruder_id", "printer_extruder_variant");
|
||||
out.update_values_to_printer_extruders(out, extruder_count, extruder_volume_type_count, nozzle_volume_types, printer_options_with_variant_2, "printer_extruder_id", "printer_extruder_variant", 2);
|
||||
//update print config related with variants
|
||||
out.update_values_to_printer_extruders(out, extruder_count, extruder_volume_type_count, nozzle_volume_types, print_options_with_variant, "print_extruder_id", "print_extruder_variant");
|
||||
}
|
||||
}
|
||||
|
||||
if (num_filaments <= 1) {
|
||||
//BBS: update filament config related with variants
|
||||
DynamicPrintConfig filament_config = this->filaments.get_edited_preset().config;
|
||||
if (apply_extruder)
|
||||
filament_config.update_values_to_printer_extruders(out, filament_options_with_variant, "", "filament_extruder_variant", 1, filament_maps[0]);
|
||||
if (apply_extruder && ((extruder_count > 1) || different_extruder))
|
||||
filament_config.update_values_to_printer_extruders(out, extruder_count, extruder_volume_type_count, nozzle_volume_types, filament_options_with_variant, "", "filament_extruder_variant", 1, filament_maps[0], (NozzleVolumeType)filament_volume_maps[0]);
|
||||
out.apply(filament_config);
|
||||
compatible_printers_condition.emplace_back(this->filaments.get_edited_preset().compatible_printers_condition());
|
||||
compatible_prints_condition .emplace_back(this->filaments.get_edited_preset().compatible_prints_condition());
|
||||
@@ -4045,8 +4203,8 @@ DynamicPrintConfig PresetBundle::full_fff_config(bool apply_extruder, std::optio
|
||||
filament_temp_configs.resize(num_filaments);
|
||||
for (size_t i = 0; i < num_filaments; ++i) {
|
||||
filament_temp_configs[i] = *(filament_configs[i]);
|
||||
if (apply_extruder)
|
||||
filament_temp_configs[i].update_values_to_printer_extruders(out, filament_options_with_variant, "", "filament_extruder_variant", 1, filament_maps[i]);
|
||||
if (apply_extruder && ((extruder_count > 1) || different_extruder))
|
||||
filament_temp_configs[i].update_values_to_printer_extruders(out, extruder_count, extruder_volume_type_count, nozzle_volume_types, filament_options_with_variant, "", "filament_extruder_variant", 1, filament_maps[i], (NozzleVolumeType)filament_volume_maps[i]);
|
||||
}
|
||||
|
||||
// loop through options and apply them to the resulting config.
|
||||
@@ -4290,6 +4448,10 @@ void PresetBundle::load_config_file_config(const std::string &name_or_path, bool
|
||||
};
|
||||
clear_compatible_printers(config);
|
||||
|
||||
// Dynamic per-nozzle filament mapping reflects live device state, not a stored setting;
|
||||
// drop it from any imported config so it only comes from the connected printer.
|
||||
config.erase("enable_filament_dynamic_map");
|
||||
|
||||
#if 0
|
||||
size_t num_extruders = (printer_technology == ptFFF) ?
|
||||
std::min(config.option<ConfigOptionFloats>("nozzle_diameter" )->values.size(),
|
||||
@@ -4778,6 +4940,8 @@ std::pair<PresetsConfigSubstitutions, size_t> PresetBundle::load_vendor_configs_
|
||||
model.use_double_extruder_default_texture = it.value();
|
||||
} else if (boost::iequals(it.key(), BBL_JSON_KEY_BOTTOM_TEXTURE_RECT)) {
|
||||
model.bottom_texture_rect = it.value();
|
||||
} else if (boost::iequals(it.key(), BBL_JSON_KEY_BOTTOM_TEXTURE_RECT_LONGER)) {
|
||||
model.bottom_texture_rect_longer = it.value();
|
||||
} else if (boost::iequals(it.key(), BBL_JSON_KEY_MIDDLE_TEXTURE_RECT)) {
|
||||
model.middle_texture_rect = it.value();
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user