Merge branch 'main' into prusa-xl

localization/i18n/fr/OrcaSlicer_fr.po

@@ -6847,10 +6847,10 @@ msgstr ""
 "fichiers .step/.stp"
 
 msgid "Associate web links to OrcaSlicer"
-msgstr ""
+msgstr "Associer des liens web à OrcaSlicer"
 
 msgid "Associate URLs to OrcaSlicer"
-msgstr ""
+msgstr "Associer des URL à OrcaSlicer"
 
 msgid "Current association: "
 msgstr "Association actuelle : "
@@ -6865,22 +6865,28 @@ msgid ""
 "Associate OrcaSlicer with prusaslicer:// links so that Orca can open models "
 "from Printable.com"
 msgstr ""
+"Associer OrcaSlicer aux liens prusaslicer:// afin qu’Orca puisse ouvrir des "
+"modèles provenant de Printable.com"
 
 msgid "Associate bambustudio://"
-msgstr ""
+msgstr "Associer bambustudio://"
 
 msgid ""
 "Associate OrcaSlicer with bambustudio:// links so that Orca can open models "
 "from makerworld.com"
 msgstr ""
+"Associer OrcaSlicer aux liens bambustudio:// afin qu’Orca puisse ouvrir des "
+"modèles provenant de makerworld.com"
 
 msgid "Associate cura://"
-msgstr ""
+msgstr "Associer cura://"
 
 msgid ""
 "Associate OrcaSlicer with cura:// links so that Orca can open models from "
 "thingiverse.com"
 msgstr ""
+"Associer OrcaSlicer aux liens cura:// pour qu’Orca puisse ouvrir les modèles "
+"de thingiverse.com"
 
 msgid "Maximum recent projects"
 msgstr "Projets récents maximum"
@@ -7792,8 +7798,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Lorsque vous enregistrez un timelapse sans tête d’outil, il est recommandé "
 "d’ajouter une \"Tour d’essuyage timelapse\".\n"
@@ -7948,9 +7954,9 @@ msgid ""
 "Bed temperature when cool plate is installed. Value 0 means the filament "
 "does not support to print on the Cool Plate"
 msgstr ""
-"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool plate"
-"\") est installé. Une valeur à 0 signifie que ce filament ne peut pas être "
-"imprimé sur le plateau froid."
+"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool "
+"plate\") est installé. Une valeur à 0 signifie que ce filament ne peut pas "
+"être imprimé sur le plateau froid."
 
 msgid "Engineering plate"
 msgstr "Plaque Engineering"
@@ -10704,6 +10710,16 @@ msgid ""
 "external surface finish. It can also cause the infill to shine through the "
 "external surfaces of the part."
 msgstr ""
+"Ordre des parois/remplissages. Lorsque la case n’est pas cochée, les parois "
+"sont imprimées en premier, ce qui fonctionne le mieux dans la plupart des "
+"cas.\n"
+"\n"
+"L’impression du remplissage en premier peut aider dans le cas de parois en "
+"surplomb importantes, car les parois ont le remplissage adjacent auquel "
+"adhérer. Cependant, le remplissage repoussera légèrement les parois "
+"imprimées à l’endroit où il est fixé, ce qui se traduira par une moins bonne "
+"finition de la surface extérieure. Cela peut également faire ressortir le "
+"remplissage à travers les surfaces externes de la pièce."
 
 msgid "Wall loop direction"
 msgstr "Direction de la paroi"
@@ -11471,10 +11487,10 @@ msgstr "Ventilateur à pleine vitesse à la couche"
 
 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
-"\". \"full_fan_speed_layer\" will be ignored if lower than "
-"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
-"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"\"close_fan_the_first_x_layers\" to maximum at layer "
+"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
+"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
+"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
 "La vitesse du ventilateur augmentera de manière linéaire à partir de zéro à "
 "la couche \"close_fan_the_first_x_layers\" jusqu’au maximum à la couche "
@@ -13208,8 +13224,8 @@ msgid ""
 "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
 "close all holes in the model."
 msgstr ""
-"Utilisez « Pair-impair » pour les modèles d'avion 3DLabPrint. Utilisez « "
-"Fermer les trous » pour fermer tous les trous du modèle."
+"Utilisez « Pair-impair » pour les modèles d'avion 3DLabPrint. Utilisez "
+"« Fermer les trous » pour fermer tous les trous du modèle."
 
 msgid "Regular"
 msgstr "Standard"
@@ -14018,8 +14034,8 @@ msgid ""
 "Wipe tower is only compatible with relative mode. It is recommended on most "
 "printers. Default is checked"
 msgstr ""
-"L’extrusion relative est recommandée lors de l’utilisation de l’option « "
-"label_objects ». Certains extrudeurs fonctionnent mieux avec cette option "
+"L’extrusion relative est recommandée lors de l’utilisation de l’option "
+"« label_objects ». Certains extrudeurs fonctionnent mieux avec cette option "
 "non verrouillée (mode d’extrusion absolu). La tour d’essuyage n’est "
 "compatible qu’avec le mode relatif. Il est recommandé sur la plupart des "
 "imprimantes. L’option par défaut est cochée"
@@ -14882,9 +14898,9 @@ msgstr ""
 "Wiki.\n"
 "\n"
 "Habituellement, la calibration est inutile. Lorsque vous démarrez une "
-"impression d'une seule couleur/matériau, avec l'option \"Calibration du débit"
-"\" cochée dans le menu de démarrage de l'impression, l'imprimante suivra "
-"l'ancienne méthode de calibration du filament avant l'impression.\n"
+"impression d'une seule couleur/matériau, avec l'option \"Calibration du "
+"débit\" cochée dans le menu de démarrage de l'impression, l'imprimante "
+"suivra l'ancienne méthode de calibration du filament avant l'impression.\n"
 "Lorsque vous démarrez une impression multi-couleurs/matériaux, l'imprimante "
 "utilise le paramètre de compensation par défaut pour le filament lors de "
 "chaque changement de filament, ce qui donne un bon résultat dans la plupart "
@@ -15663,8 +15679,8 @@ msgstr ""
 "Voulez-vous le réécrire ?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more printers, Please go to printer selection"
 msgstr ""
 "Nous renommerions les préréglages en « Vendor Type Serial @printer you "
@@ -16098,7 +16114,7 @@ msgstr "Astuces quotidiennes"
 
 #, c-format, boost-format
 msgid "nozzle memorized: %.1f %s"
-msgstr ""
+msgstr "buse mémorisée : %.1f %s"
 
 msgid ""
 "Your nozzle diameter in preset is not consistent with memorized nozzle "
@@ -17482,8 +17498,8 @@ msgstr ""
 #~ "thickness (top+bottom solid layers)"
 #~ msgstr ""
 #~ "Ajoutez du remplissage solide à proximité des surfaces inclinées pour "
-#~ "garantir l'épaisseur verticale de la coque (couches solides supérieure"
-#~ "+inférieure)."
+#~ "garantir l'épaisseur verticale de la coque (couches solides "
+#~ "supérieure+inférieure)."
 
 #~ msgid "Further reduce solid infill on walls (beta)"
 #~ msgstr "Réduire davantage le remplissage solide des parois (expérimental)"

localization/i18n/pl/OrcaSlicer_pl.po

@@ -2504,8 +2504,8 @@ msgid ""
 "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically "
 "load or unload filaments."
 msgstr ""
-"Wybierz gniazdo AMS, a następnie naciśnij przycisk \"Ładuj\" lub \"Wyładuj"
-"\" ,aby automatycznie załadować lub wyładować filamenty."
+"Wybierz gniazdo AMS, a następnie naciśnij przycisk \"Ładuj\" lub "
+"\"Wyładuj\" ,aby automatycznie załadować lub wyładować filamenty."
 
 msgid "Edit"
 msgstr "Edytuj"
@@ -5370,7 +5370,7 @@ msgid "Control"
 msgstr "Sterowanie"
 
 msgid "Printer Parts"
-msgstr "Części głowicy"
+msgstr "Typ dyszy"
 
 msgid "Print Options"
 msgstr "Opcje drukowania"
@@ -6776,16 +6776,16 @@ msgstr ""
 "plików .step"
 
 msgid "Associate web links to OrcaSlicer"
-msgstr ""
+msgstr "Powiąż linki z OrcaSlicer"
 
 msgid "Associate URLs to OrcaSlicer"
-msgstr ""
+msgstr "Powiąż URL z OrcaSlicer"
 
 msgid "Current association: "
-msgstr "Aktualne skojarzenie:"
+msgstr "Aktualnie powiązano: "
 
 msgid "Associate prusaslicer://"
-msgstr "Skojarz prusaslicer://"
+msgstr "z prusaslicer://"
 
 msgid "Not associated to any application"
 msgstr "Nie skojarzony z żadną aplikacją"
@@ -6794,22 +6794,28 @@ msgid ""
 "Associate OrcaSlicer with prusaslicer:// links so that Orca can open models "
 "from Printable.com"
 msgstr ""
+"Powiąż OrcaSlicer z linkami prusaslicer://, aby Orca mogła otwierać modele z "
+"Printable.com"
 
 msgid "Associate bambustudio://"
-msgstr ""
+msgstr "z bambustudio://"
 
 msgid ""
 "Associate OrcaSlicer with bambustudio:// links so that Orca can open models "
 "from makerworld.com"
 msgstr ""
+"Powiąż OrcaSlicer z linkami bambustudio://, aby Orca mogła otwierać modele z "
+"makerworld.com"
 
 msgid "Associate cura://"
-msgstr ""
+msgstr "z cura://"
 
 msgid ""
 "Associate OrcaSlicer with cura:// links so that Orca can open models from "
 "thingiverse.com"
 msgstr ""
+"Powiąż OrcaSlicer z linkami cura://, aby Orca mogła otwierać modele z "
+"thingiverse.com"
 
 msgid "Maximum recent projects"
 msgstr "Maksymalna liczba ostatnich projektów"
@@ -7345,7 +7351,7 @@ msgid ""
 msgstr ""
 "Średnica dyszy w przetworzonym pliku nie jest zgodna z średnicą dyszy w "
 "ustawieniach. Jeśli ostatnio zmieniłeś dyszę, przejdź do opcji Urządzenie > "
-"Części głowicy, aby zmienić to ustawienie."
+"Typ dyszy, aby zmienić to ustawienie."
 
 #, c-format, boost-format
 msgid ""
@@ -7682,8 +7688,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Podczas nagrywania timelapse'a bez głowicy drukującej zaleca się dodanie "
 "\"Timelaps - Wieża Czyszcząca\" \n"
@@ -9577,10 +9583,10 @@ msgid ""
 msgstr ""
 "Unikaj ruchów nad obrysami-\n"
 "Maksymalna długość objazdu przy unikaniu przejeżdżania nad obrysami. Jeśli "
-"objazd miałby wykroczyć poza tę wartość, funkcja \"unikaj ruchów nad obrysami"
-"\" zostanie zignorowana dla tej ścieżki. Długość objazdu można zdefiniować "
-"jako wartość absolutna lub obliczona procentowo (np. 50%) z długości ruchu "
-"bezpośredniego."
+"objazd miałby wykroczyć poza tę wartość, funkcja \"unikaj ruchów nad "
+"obrysami\" zostanie zignorowana dla tej ścieżki. Długość objazdu można "
+"zdefiniować jako wartość absolutna lub obliczona procentowo (np. 50%) z "
+"długości ruchu bezpośredniego."
 
 msgid "mm or %"
 msgstr "mm lub %"
@@ -10535,6 +10541,14 @@ msgid ""
 "external surface finish. It can also cause the infill to shine through the "
 "external surfaces of the part."
 msgstr ""
+"Kolejność drukowania ścian/wypełnienia. Gdy pole wyboru nie jest zaznaczone, "
+"najpierw drukowane są ściany, co w większości przypadków działa najlepiej.\n"
+"Drukowanie najpierw wypełnienia, może pomóc przy ekstremalnych nawisach, "
+"ponieważ ściany mają sąsiadujące wypełnienie, do którego przylegają. Jednak "
+"wypełnienie może nieznacznie wypchnąć tak wydrukowane ściany w miejscu gdzie "
+"są do nich przymocowane. Skutkuje to gorszym wykończeniem zewnętrznej "
+"powierzchni. Może to również spowodować prześwitywanie wypełnienia przez "
+"zewnętrzne powierzchnie części."
 
 msgid "Wall loop direction"
 msgstr "Kierunek obwodu ściany"
@@ -11293,10 +11307,10 @@ msgstr "Pełna prędkość wentylatora na warstwie"
 
 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
-"\". \"full_fan_speed_layer\" will be ignored if lower than "
-"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
-"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"\"close_fan_the_first_x_layers\" to maximum at layer "
+"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
+"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
+"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
 "Prędkość wentylatora będzie stopniowo zwiększana liniowo od zera na warstwie "
 "\"close_fan_the_first_x_layers\" do maksymalnej na warstwie "
@@ -12996,10 +13010,10 @@ msgid ""
 "triangle mesh slicing. The gap closing operation may reduce the final print "
 "resolution, therefore it is advisable to keep the value reasonably low."
 msgstr ""
-"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania szpar"
-"\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może zmniejszyć "
-"finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej wartości na "
-"rozsądnie niskim poziomie."
+"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania "
+"szpar\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może "
+"zmniejszyć finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej "
+"wartości na rozsądnie niskim poziomie."
 
 msgid "Slicing Mode"
 msgstr "Tryb cięcia"
@@ -14321,7 +14335,7 @@ msgid "floating regions"
 msgstr "unoszące się obszary"
 
 msgid "floating cantilever"
-msgstr "nawisająca konstrukcja (cantilever)"
+msgstr "nawisającą konstrukcje (cantilever)"
 
 msgid "large overhangs"
 msgstr "duże nawisy"
@@ -15389,8 +15403,8 @@ msgstr ""
 "Czy chcesz go zastąpić?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more printers, Please go to printer selection"
 msgstr ""
 "Nazwa profilu zostanie zmieniona na \"Dostawca Typ Seria @nazwa drukarki, "
@@ -15810,7 +15824,7 @@ msgstr "Porada Dnia"
 
 #, c-format, boost-format
 msgid "nozzle memorized: %.1f %s"
-msgstr ""
+msgstr "zapamiętana dysza: %.1f %s"
 
 msgid ""
 "Your nozzle diameter in preset is not consistent with memorized nozzle "
@@ -17895,8 +17909,8 @@ msgstr ""
 #~ "Elevation is too low for object. Use the \"Pad around object\" feature to "
 #~ "print the object without elevation."
 #~ msgstr ""
-#~ "Podniesienie zbyt małe dla modelu. Użyj funkcji \"Podkładka wokół modelu"
-#~ "\", aby wydrukować model bez podniesienia."
+#~ "Podniesienie zbyt małe dla modelu. Użyj funkcji \"Podkładka wokół "
+#~ "modelu\", aby wydrukować model bez podniesienia."
 
 #~ msgid ""
 #~ "The endings of the support pillars will be deployed on the gap between "

resources/images/inputbox_x.svg

@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><line x1="4.5" y1="3.5" x2="10.5" y2="12.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="10.5" y1="3.5" x2="4.5" y2="12.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/images/inputbox_y.svg

@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><line x1="4.5" y1="3.5" x2="7.5" y2="8.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="10.5" y1="3.5" x2="7.5" y2="8.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="7.5" y1="8.5" x2="7.5" y2="12.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/></svg>

resources/profiles/Anker/process/fdm_process_anker_fast_common.json

@@ -12,7 +12,7 @@
     "outer_wall_acceleration": "3000",
     "bridge_acceleration": "1500",
     "sparse_infill_density": "10%",
-    "sparse_infill_pattern": "supportcubic",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_acceleration": "2500",
     "gap_infill_speed": "300",
     "sparse_infill_speed": "600",

resources/profiles/Anker/process/fdm_process_common.json

@@ -22,7 +22,7 @@
     "bottom_shell_layers": "4",
     "bottom_shell_thickness": "0.5",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "cubic",
+    "sparse_infill_pattern": "crosshatch",
     "infill_wall_overlap": "23%",
     "infill_direction": "45",
     "minimum_sparse_infill_area": "15",
@@ -60,7 +60,7 @@
     "travel_jerk": "20",
     "enable_support": "0",
     "support_type": "normal(auto)",
-    "support_threshold_angle": "40",
+    "support_threshold_angle": "30",
     "support_on_build_plate_only": "0",
     "raft_layers": "0",
     "support_filament": "0",

resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "300",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "45",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "800",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.15",
 	"support_speed": "50",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.42",
 	"infill_direction": "45",
 	"sparse_infill_density": "10%",
-	"sparse_infill_pattern": "zig-zag",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "2000",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.15",
 	"support_speed": "100",
-	"support_threshold_angle": "65",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json

@@ -29,7 +29,7 @@
 	"line_width": "0.4",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.15",
 	"support_speed": "70",
-	"support_threshold_angle": "65",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraPlus.json

@@ -29,7 +29,7 @@
 	"line_width": "0.4",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.15",
 	"support_speed": "70",
-	"support_threshold_angle": "65",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json

@@ -29,7 +29,7 @@
 	"line_width": "0.4",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.15",
 	"support_speed": "70",
-	"support_threshold_angle": "65",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "800",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.15",
 	"support_speed": "50",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "300",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "45",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "800",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "50",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.42",
 	"infill_direction": "45",
 	"sparse_infill_density": "10%",
-	"sparse_infill_pattern": "zig-zag",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "2000",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "100",
-	"support_threshold_angle": "65",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json

@@ -29,7 +29,7 @@
 	"line_width": "0.4",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "70",
-	"support_threshold_angle": "65",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraPlus.json

@@ -29,7 +29,7 @@
 	"line_width": "0.4",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "70",
-	"support_threshold_angle": "65",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json

@@ -29,7 +29,7 @@
 	"line_width": "0.4",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "70",
-	"support_threshold_angle": "65",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "800",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "50",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "300",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.3",
 	"support_speed": "45",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json

@@ -29,7 +29,7 @@
 	"line_width": "0.5",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "800",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "45",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.42",
 	"infill_direction": "45",
 	"sparse_infill_density": "10%",
-	"sparse_infill_pattern": "zig-zag",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "2000",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.3",
 	"support_speed": "100",
-	"support_threshold_angle": "65",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json

@@ -29,7 +29,7 @@
 	"line_width": "0.4",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.3",
 	"support_speed": "70",
-	"support_threshold_angle": "65",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraPlus.json

@@ -29,7 +29,7 @@
 	"line_width": "0.4",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.3",
 	"support_speed": "70",
-	"support_threshold_angle": "65",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json

@@ -29,7 +29,7 @@
 	"line_width": "0.4",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.3",
 	"support_speed": "70",
-	"support_threshold_angle": "65",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json

@@ -29,7 +29,7 @@
 	"line_width": "0.5",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "800",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "45",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Anycubic/process/fdm_process_common.json

@@ -29,7 +29,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_line_width": "0.5",
     "initial_layer_print_height": "0.2",
     "infill_combination": "0",

resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json

@@ -29,7 +29,7 @@
 	"line_width": "0.5",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",

resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json

@@ -29,7 +29,7 @@
 	"line_width": "0.5",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",

resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json

@@ -29,7 +29,7 @@
 	"line_width": "0.5",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",

resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json

@@ -29,7 +29,7 @@
 	"line_width": "0.5",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",

resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius Pro.json

@@ -29,7 +29,7 @@
 	"line_width": "0.5",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",

resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json

@@ -29,7 +29,7 @@
 	"line_width": "0.5",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",

resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json

@@ -29,7 +29,7 @@
 	"line_width": "0.5",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",

resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json

@@ -29,7 +29,7 @@
 	"line_width": "0.5",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",

resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.5",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",

resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json

@@ -29,7 +29,7 @@
 	"line_width": "0.5",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",

resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json

@@ -29,7 +29,7 @@
 	"line_width": "0.5",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",

resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius Pro.json

@@ -29,7 +29,7 @@
 	"line_width": "0.5",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",

resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json

@@ -29,7 +29,7 @@
 	"line_width": "0.5",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",

resources/profiles/Artillery/process/fdm_process_common.json

@@ -29,7 +29,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_line_width": "0.5",
     "initial_layer_print_height": "0.2",
     "infill_combination": "0",

resources/profiles/BBL/process/0.06mm High Quality @BBL A1 0.2 nozzle.json

@@ -12,7 +12,7 @@
     "initial_layer_speed": "16",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 0.2 nozzle"

resources/profiles/BBL/process/0.06mm High Quality @BBL A1M 0.2 nozzle.json

@@ -11,7 +11,7 @@
     "initial_layer_speed": "16",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.2 nozzle"

resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json

@@ -10,7 +10,7 @@
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "compatible_printers": [
         "Bambu Lab P1P 0.2 nozzle"
     ]

resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json

@@ -10,7 +10,7 @@
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",

resources/profiles/BBL/process/0.08mm High Quality @BBL A1 0.2 nozzle.json

@@ -12,7 +12,7 @@
     "initial_layer_speed": "16",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 0.2 nozzle"

resources/profiles/BBL/process/0.08mm High Quality @BBL A1.json

@@ -13,7 +13,7 @@
     "internal_solid_infill_speed": "150",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "150",
     "top_surface_speed": "150",
     "travel_speed": "700",

resources/profiles/BBL/process/0.08mm High Quality @BBL A1M 0.2 nozzle.json

@@ -11,7 +11,7 @@
     "initial_layer_speed": "16",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.2 nozzle"

resources/profiles/BBL/process/0.08mm High Quality @BBL A1M.json

@@ -13,7 +13,7 @@
     "internal_solid_infill_speed": "150",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "150",
     "top_surface_speed": "150",
     "travel_speed": "700",

resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json

@@ -10,7 +10,7 @@
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "compatible_printers": [
         "Bambu Lab P1P 0.2 nozzle"
     ]

resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json

@@ -13,7 +13,7 @@
     "internal_solid_infill_speed": "150",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "150",
     "top_surface_speed": "150",
     "compatible_printers": [

resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json

@@ -10,7 +10,7 @@
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",

resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json

@@ -12,7 +12,7 @@
     "internal_solid_infill_speed": "150",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "150",
     "top_surface_speed": "150",
     "compatible_printers": [

resources/profiles/BBL/process/0.10mm High Quality @BBL A1 0.2 nozzle.json

@@ -12,7 +12,7 @@
     "initial_layer_speed": "16",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 0.2 nozzle"

resources/profiles/BBL/process/0.10mm High Quality @BBL A1M 0.2 nozzle.json

@@ -12,7 +12,7 @@
     "initial_layer_speed": "16",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.2 nozzle"

resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json

@@ -10,7 +10,7 @@
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "compatible_printers": [
         "Bambu Lab P1P 0.2 nozzle"
     ]

resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json

@@ -10,7 +10,7 @@
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",

resources/profiles/BBL/process/0.12mm High Quality @BBL A1.json

@@ -13,7 +13,7 @@
     "internal_solid_infill_speed": "180",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "180",
     "top_surface_speed": "150",
     "travel_speed": "700",

resources/profiles/BBL/process/0.12mm High Quality @BBL A1M.json

@@ -13,7 +13,7 @@
     "internal_solid_infill_speed": "180",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "180",
     "top_surface_speed": "150",
     "travel_speed": "700",

resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json

@@ -12,7 +12,7 @@
     "internal_solid_infill_speed": "180",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "180",
     "top_surface_speed": "150",
     "compatible_printers": [

resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json

@@ -12,7 +12,7 @@
     "internal_solid_infill_speed": "180",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "180",
     "top_surface_speed": "150",
     "compatible_printers": [

resources/profiles/BBL/process/0.16mm High Quality @BBL A1.json

@@ -13,7 +13,7 @@
     "internal_solid_infill_speed": "200",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "200",
     "top_surface_speed": "150",
     "travel_speed": "700",

resources/profiles/BBL/process/0.16mm High Quality @BBL A1M.json

@@ -13,7 +13,7 @@
     "internal_solid_infill_speed": "200",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "200",
     "top_surface_speed": "150",
     "travel_speed": "700",

resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json

@@ -12,7 +12,7 @@
     "internal_solid_infill_speed": "200",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "200",
     "top_surface_speed": "150",
     "compatible_printers": [

resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json

@@ -12,7 +12,7 @@
     "internal_solid_infill_speed": "200",
     "outer_wall_acceleration": "2000",
     "outer_wall_speed": "60",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "200",
     "top_surface_speed": "150",
     "compatible_printers": [

resources/profiles/BBL/process/fdm_process_bbl_0.08.json

@@ -20,7 +20,7 @@
     "overhang_1_4_speed": "60",
     "overhang_2_4_speed": "30",
     "overhang_3_4_speed": "10",
-    "support_threshold_angle": "15",
+    "support_threshold_angle": "30",
     "support_top_z_distance": "0.08",
     "support_bottom_z_distance": "0.08"
 }

resources/profiles/BBL/process/fdm_process_bbl_0.12.json

@@ -20,7 +20,7 @@
     "overhang_1_4_speed": "60",
     "overhang_2_4_speed": "30",
     "overhang_3_4_speed": "10",
-    "support_threshold_angle": "20",
+    "support_threshold_angle": "30",
     "support_top_z_distance": "0.12",
     "support_bottom_z_distance": "0.12"
 }

resources/profiles/BBL/process/fdm_process_bbl_0.16.json

@@ -20,7 +20,7 @@
     "overhang_1_4_speed": "60",
     "overhang_2_4_speed": "30",
     "overhang_3_4_speed": "10",
-    "support_threshold_angle": "25",
+    "support_threshold_angle": "30",
     "support_top_z_distance": "0.16",
     "support_bottom_z_distance": "0.16"
 }

resources/profiles/BBL/process/fdm_process_bbl_0.24.json

@@ -16,6 +16,6 @@
     "sparse_infill_speed": "230",
     "internal_solid_infill_speed": "230",
     "gap_infill_speed": "230",
-    "support_threshold_angle": "35",
+    "support_threshold_angle": "30",
     "top_shell_layers": "4"
 }

resources/profiles/BBL/process/fdm_process_bbl_0.28.json

@@ -16,6 +16,6 @@
     "sparse_infill_speed": "200",
     "internal_solid_infill_speed": "200",
     "gap_infill_speed": "200",
-    "support_threshold_angle": "40",
+    "support_threshold_angle": "30",
     "top_shell_layers": "4"
 }

resources/profiles/BBL/process/fdm_process_common.json

@@ -17,7 +17,7 @@
     "line_width": "0.45",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_line_width": "0.42",
     "initial_layer_print_height": "0.2",
     "initial_layer_speed": "20",
@@ -57,7 +57,7 @@
     "support_base_pattern": "default",
     "support_base_pattern_spacing": "2",
     "support_speed": "40",
-    "support_threshold_angle": "40",
+    "support_threshold_angle": "30",
     "support_object_xy_distance": "0.5",
     "detect_thin_wall": "0",
     "top_surface_line_width": "0.42",

resources/profiles/BIQU/process/fdm_process_biqu_common.json

@@ -27,7 +27,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_acceleration": "500",
     "travel_acceleration": "700",
     "inner_wall_acceleration": "500",

resources/profiles/BIQU/process/fdm_process_common.json

@@ -18,7 +18,7 @@
     "line_width": "0.45",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_line_width": "0.42",
     "initial_layer_print_height": "0.2",
     "initial_layer_speed": "20",
@@ -57,7 +57,7 @@
     "support_base_pattern": "rectilinear",
     "support_base_pattern_spacing": "2",
     "support_speed": "40",
-    "support_threshold_angle": "40",
+    "support_threshold_angle": "30",
     "support_object_xy_distance": "0.5",
     "detect_thin_wall": "0",
     "top_surface_line_width": "0.4",

resources/profiles/BIQU/process/fdm_process_hurakan_common.json

@@ -27,7 +27,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_acceleration": "500",
     "travel_acceleration": "700",
     "inner_wall_acceleration": "500",

resources/profiles/CONSTRUCT3D/process/0.14mm Quality @Construct 1.json

@@ -38,7 +38,7 @@
     "slow_down_layers": "1",
     "sparse_infill_density": "12%",
     "sparse_infill_line_width": "0.4",
-    "sparse_infill_pattern": "line",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "300",
     "support_speed": "300",
     "top_shell_layers": "5",

resources/profiles/CONSTRUCT3D/process/0.20mm Quality @Construct 1 XL.json

@@ -37,7 +37,7 @@
     "slow_down_layers": "1",
     "sparse_infill_density": "18%",
     "sparse_infill_line_width": "0.6",
-    "sparse_infill_pattern": "line",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "240",
     "support_line_width": "0.6",
     "top_shell_layers": "5",

resources/profiles/CONSTRUCT3D/process/0.22mm Standard @Construct 1.json

@@ -38,7 +38,7 @@
     "slow_down_layers": "1",
     "sparse_infill_density": "12%",
     "sparse_infill_line_width": "0.4",
-    "sparse_infill_pattern": "line",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "300",
     "support_speed": "300",
     "top_shell_layers": "3",

resources/profiles/CONSTRUCT3D/process/0.25mm Industrial @Construct 1.json

@@ -40,7 +40,7 @@
     "slow_down_layers": "1",
     "sparse_infill_density": "30%",
     "sparse_infill_line_width": "0.62",
-    "sparse_infill_pattern": "triangles",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "300",
     "support_speed": "300",
     "top_surface_acceleration": "2000",

resources/profiles/CONSTRUCT3D/process/0.30mm Draft @Construct 1.json

@@ -40,7 +40,7 @@
     "slow_down_layers": "1",
     "sparse_infill_density": "12%",
     "sparse_infill_line_width": "0.4",
-    "sparse_infill_pattern": "line",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "300",
     "support_speed": "300",
     "top_shell_layers": "2",

resources/profiles/CONSTRUCT3D/process/0.30mm Industrial @Construct 1 XL.json

@@ -38,7 +38,7 @@
     "slow_down_layers": "1",
     "sparse_infill_density": "30%",
     "sparse_infill_line_width": "0.82",
-    "sparse_infill_pattern": "triangles",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "240",
     "support_line_width": "0.6",
     "top_shell_layers": "5",

resources/profiles/CONSTRUCT3D/process/0.30mm Standard @Construct 1 XL.json

@@ -41,7 +41,7 @@
     "slow_down_layers": "1",
     "sparse_infill_density": "12%",
     "sparse_infill_line_width": "0.64",
-    "sparse_infill_pattern": "line",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "300",
     "support_line_width": "0.6",
     "support_speed": "300",

resources/profiles/CONSTRUCT3D/process/0.38mm Draft @Construct 1 XL.json

@@ -42,7 +42,7 @@
     "slow_down_layers": "1",
     "sparse_infill_density": "12%",
     "sparse_infill_line_width": "0.64",
-    "sparse_infill_pattern": "line",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "300",
     "support_line_width": "0.6",
     "support_speed": "300",

resources/profiles/CONSTRUCT3D/process/fdm_process_common.json

@@ -27,7 +27,7 @@
     "wall_infill_order": "inner wall/outer wall/infill",
     "infill_direction": "45",
     "sparse_infill_density": "12%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_print_height": "0.24",
     "infill_combination": "0",
     "infill_wall_overlap": "10%",

resources/profiles/Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json

@@ -27,7 +27,7 @@
 	"line_width": "0.6",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_line_width": "0.6",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
@@ -73,7 +73,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "120",
-	"support_threshold_angle": "40",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json

@@ -27,7 +27,7 @@
 	"line_width": "0.4",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_line_width": "0.4",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
@@ -73,7 +73,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "140",
-	"support_threshold_angle": "40",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Comgrow/process/0.18mm Optimal @Comgrow T500.json

@@ -27,7 +27,7 @@
 	"line_width": "0.44",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_line_width": "0.42",
 	"initial_layer_print_height": "0.24",
 	"infill_combination": "0",
@@ -73,7 +73,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "40",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.4.json

@@ -27,7 +27,7 @@
 	"line_width": "0.4",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_line_width": "0.4",
 	"initial_layer_print_height": "0.24",
 	"infill_combination": "0",
@@ -73,7 +73,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "140",
-	"support_threshold_angle": "40",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",