mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-15 04:57:34 +00:00
Mint content-addressed ids for the Bambu bundle
This commit is contained in:
SoftFever
@@ -3,7 +3,7 @@
|
||||
"name": "BETA ABS @base",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"filament_id": "BABB00",
|
||||
"filament_id": "OFjUXn67",
|
||||
"instantiation": "false",
|
||||
"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"filament_cost": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA ASA @base",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"filament_id": "BASB00",
|
||||
"filament_id": "OFZqZMuv",
|
||||
"instantiation": "false",
|
||||
"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"eng_plate_temp": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA HIPS @base",
|
||||
"inherits": "fdm_filament_hips",
|
||||
"from": "system",
|
||||
"filament_id": "BHIB00",
|
||||
"filament_id": "OFlmxlDG",
|
||||
"instantiation": "false",
|
||||
"filament_is_support": [
|
||||
"1"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PAHT-CF @base",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "BPAB00",
|
||||
"filament_id": "OF6qw3Wb",
|
||||
"instantiation": "false",
|
||||
"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"fan_cooling_layer_time": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PEBA 90A @base",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "BPBB00",
|
||||
"filament_id": "OFI2MKy7",
|
||||
"instantiation": "false",
|
||||
"description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
|
||||
"filament_cost": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PETG @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "BPGB00",
|
||||
"filament_id": "OFrqMlGt",
|
||||
"instantiation": "false",
|
||||
"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
|
||||
"cool_plate_temp": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PETG Fluorescence @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "BPGB02",
|
||||
"filament_id": "OFYGrfHY",
|
||||
"instantiation": "false",
|
||||
"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
|
||||
"cool_plate_temp": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PETG Glitter @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "BPGB03",
|
||||
"filament_id": "OFjogeYN",
|
||||
"instantiation": "false",
|
||||
"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
|
||||
"cool_plate_temp": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PETG Glow @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "BPGB04",
|
||||
"filament_id": "OFFfJ09N",
|
||||
"instantiation": "false",
|
||||
"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
|
||||
"cool_plate_temp": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PETG Gradient @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "BPGB05",
|
||||
"filament_id": "OFNk8AvA",
|
||||
"instantiation": "false",
|
||||
"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
|
||||
"cool_plate_temp": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PETG HF @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "BPGB06",
|
||||
"filament_id": "OFxqf79Q",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PETG Heat Color Change @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "BPGB01",
|
||||
"filament_id": "OFyPTnSk",
|
||||
"instantiation": "false",
|
||||
"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
|
||||
"cool_plate_temp": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PETG Marble @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "BPGB07",
|
||||
"filament_id": "OF4XTfoI",
|
||||
"instantiation": "false",
|
||||
"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
|
||||
"cool_plate_temp": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PETG Matte @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "BPGB08",
|
||||
"filament_id": "OFnpX8uh",
|
||||
"instantiation": "false",
|
||||
"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
|
||||
"cool_plate_temp": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PETG Metallic @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "BPGB09",
|
||||
"filament_id": "OFz1a1fy",
|
||||
"instantiation": "false",
|
||||
"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
|
||||
"cool_plate_temp": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PETG Transparent @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "BPGB10",
|
||||
"filament_id": "OFmt513L",
|
||||
"instantiation": "false",
|
||||
"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
|
||||
"cool_plate_temp": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PETG UV Color Change @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "BPGB11",
|
||||
"filament_id": "OFKyNkQz",
|
||||
"instantiation": "false",
|
||||
"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
|
||||
"cool_plate_temp": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PETG-CF @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "BPGB12",
|
||||
"filament_id": "OFtndTHe",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PETG-GF @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "BPGB13",
|
||||
"filament_id": "OFSiCZP3",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Basic @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB00",
|
||||
"filament_id": "OFuvOt0r",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Chameleon @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB02",
|
||||
"filament_id": "OFW8M3CY",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Fluorescence @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB04",
|
||||
"filament_id": "OF4PKvem",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Glitter @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB05",
|
||||
"filament_id": "OFcnWTJB",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Glow @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB06",
|
||||
"filament_id": "OFGc9l16",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Gradient @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB07",
|
||||
"filament_id": "OF5LAnla",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Heat Color Change @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB03",
|
||||
"filament_id": "OFSfm8iP",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA High Speed @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB20",
|
||||
"filament_id": "OF3PDEw3",
|
||||
"instantiation": "false",
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA High Temp @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB18",
|
||||
"filament_id": "OF5BXhHF",
|
||||
"instantiation": "false",
|
||||
"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
|
||||
"filament_cost": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Marble @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB08",
|
||||
"filament_id": "OFKYBAWe",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Matte @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB09",
|
||||
"filament_id": "OFwc74ck",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Metal @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB10",
|
||||
"filament_id": "OF03RK6r",
|
||||
"instantiation": "false",
|
||||
"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
|
||||
"filament_cost": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Metallic @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB11",
|
||||
"filament_id": "OFkHbjUv",
|
||||
"instantiation": "false",
|
||||
"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
|
||||
"filament_cost": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA PRO @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB12",
|
||||
"filament_id": "OFMzRg65",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Silk @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB13",
|
||||
"filament_id": "OFeF4UNh",
|
||||
"instantiation": "false",
|
||||
"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
|
||||
"filament_cost": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Silk+ @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB01",
|
||||
"filament_id": "OF8QdQwS",
|
||||
"instantiation": "false",
|
||||
"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
|
||||
"filament_cost": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Transparent @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB14",
|
||||
"filament_id": "OFJnEaCp",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA UV Color Change @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB15",
|
||||
"filament_id": "OFpdjFI3",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Wood @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB19",
|
||||
"filament_id": "OFGVxj2A",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA Youth @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB16",
|
||||
"filament_id": "OFF5o7b2",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA PLA-CF @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "BPLB17",
|
||||
"filament_id": "OFLqgSuX",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA TPU 90A @base",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "BTUB00",
|
||||
"filament_id": "OF6Yn69v",
|
||||
"instantiation": "false",
|
||||
"description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
|
||||
"filament_cost": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA TPU 95A @base",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "BTUB02",
|
||||
"filament_id": "OFK7830e",
|
||||
"instantiation": "false",
|
||||
"description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
|
||||
"filament_cost": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA TPU 98A @base",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "BTUB03",
|
||||
"filament_id": "OFzaq7Yg",
|
||||
"instantiation": "false",
|
||||
"description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
|
||||
"filament_cost": [
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "BETA TPU Matte @base",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "BTUB01",
|
||||
"filament_id": "OF4QZANi",
|
||||
"instantiation": "false",
|
||||
"description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
|
||||
"filament_cost": [
|
||||
|
||||
Reference in New Issue
Block a user