diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index a2e72e00cb..723a907f52 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -1,7 +1,7 @@ { "name": "Bambulab", "url": "http://www.bambulab.com/Parameters/vendor/BBL.json", - "version": "02.01.00.23", + "version": "02.01.00.24", "force_update": "0", "description": "BBL configurations", "machine_model_list": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA ABS @base.json b/resources/profiles/BBL/filament/BETA/BETA ABS @base.json index 38e7aa5c12..bbed068703 100644 --- a/resources/profiles/BBL/filament/BETA/BETA ABS @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA ABS @base.json @@ -3,7 +3,7 @@ "name": "BETA ABS @base", "inherits": "fdm_filament_abs", "from": "system", - "filament_id": "BABB00", + "filament_id": "OFjUXn67", "instantiation": "false", "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA ASA @base.json b/resources/profiles/BBL/filament/BETA/BETA ASA @base.json index a36f654b02..a525f16bb1 100644 --- a/resources/profiles/BBL/filament/BETA/BETA ASA @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA ASA @base.json @@ -3,7 +3,7 @@ "name": "BETA ASA @base", "inherits": "fdm_filament_asa", "from": "system", - "filament_id": "BASB00", + "filament_id": "OFZqZMuv", "instantiation": "false", "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "eng_plate_temp": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA HIPS @base.json b/resources/profiles/BBL/filament/BETA/BETA HIPS @base.json index 2647bc3397..4d244f9fe1 100644 --- a/resources/profiles/BBL/filament/BETA/BETA HIPS @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA HIPS @base.json @@ -3,7 +3,7 @@ "name": "BETA HIPS @base", "inherits": "fdm_filament_hips", "from": "system", - "filament_id": "BHIB00", + "filament_id": "OFlmxlDG", "instantiation": "false", "filament_is_support": [ "1" diff --git a/resources/profiles/BBL/filament/BETA/BETA PAHT-CF @base.json b/resources/profiles/BBL/filament/BETA/BETA PAHT-CF @base.json index c0116f418c..1c140e3720 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PAHT-CF @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PAHT-CF @base.json @@ -3,7 +3,7 @@ "name": "BETA PAHT-CF @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "BPAB00", + "filament_id": "OF6qw3Wb", "instantiation": "false", "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_cooling_layer_time": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @base.json b/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @base.json index d92ceb29b1..fe1d3cd5b6 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @base.json @@ -3,7 +3,7 @@ "name": "BETA PEBA 90A @base", "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "BPBB00", + "filament_id": "OFI2MKy7", "instantiation": "false", "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG @base.json b/resources/profiles/BBL/filament/BETA/BETA PETG @base.json index 9d15c065f5..07a25f9233 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PETG @base.json @@ -3,7 +3,7 @@ "name": "BETA PETG @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "BPGB00", + "filament_id": "OFrqMlGt", "instantiation": "false", "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @base.json b/resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @base.json index b9b0032612..b79699b9fc 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @base.json @@ -3,7 +3,7 @@ "name": "BETA PETG Fluorescence @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "BPGB02", + "filament_id": "OFYGrfHY", "instantiation": "false", "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Glitter @base.json b/resources/profiles/BBL/filament/BETA/BETA PETG Glitter @base.json index 70d84d21d3..c6b7b96de5 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Glitter @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PETG Glitter @base.json @@ -3,7 +3,7 @@ "name": "BETA PETG Glitter @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "BPGB03", + "filament_id": "OFjogeYN", "instantiation": "false", "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Glow @base.json b/resources/profiles/BBL/filament/BETA/BETA PETG Glow @base.json index 7da99e23fc..30c8cc2783 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Glow @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PETG Glow @base.json @@ -3,7 +3,7 @@ "name": "BETA PETG Glow @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "BPGB04", + "filament_id": "OFFfJ09N", "instantiation": "false", "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Gradient @base.json b/resources/profiles/BBL/filament/BETA/BETA PETG Gradient @base.json index 6f6e891503..cff77a0d6c 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Gradient @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PETG Gradient @base.json @@ -3,7 +3,7 @@ "name": "BETA PETG Gradient @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "BPGB05", + "filament_id": "OFNk8AvA", "instantiation": "false", "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG HF @base.json b/resources/profiles/BBL/filament/BETA/BETA PETG HF @base.json index 1ce6e4299e..b7aa43b6b5 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG HF @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PETG HF @base.json @@ -3,7 +3,7 @@ "name": "BETA PETG HF @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "BPGB06", + "filament_id": "OFxqf79Q", "instantiation": "false", "cool_plate_temp": [ "0" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @base.json b/resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @base.json index 32a62c63b7..254cf9e4c1 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @base.json @@ -3,7 +3,7 @@ "name": "BETA PETG Heat Color Change @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "BPGB01", + "filament_id": "OFyPTnSk", "instantiation": "false", "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Marble @base.json b/resources/profiles/BBL/filament/BETA/BETA PETG Marble @base.json index 30c79b2db5..335a3f59b2 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Marble @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PETG Marble @base.json @@ -3,7 +3,7 @@ "name": "BETA PETG Marble @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "BPGB07", + "filament_id": "OF4XTfoI", "instantiation": "false", "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Matte @base.json b/resources/profiles/BBL/filament/BETA/BETA PETG Matte @base.json index c7278e20dd..52a838f323 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Matte @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PETG Matte @base.json @@ -3,7 +3,7 @@ "name": "BETA PETG Matte @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "BPGB08", + "filament_id": "OFnpX8uh", "instantiation": "false", "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Metallic @base.json b/resources/profiles/BBL/filament/BETA/BETA PETG Metallic @base.json index b2d9ce8524..9c276bcf4d 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Metallic @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PETG Metallic @base.json @@ -3,7 +3,7 @@ "name": "BETA PETG Metallic @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "BPGB09", + "filament_id": "OFz1a1fy", "instantiation": "false", "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Transparent @base.json b/resources/profiles/BBL/filament/BETA/BETA PETG Transparent @base.json index 6378e0cfdd..781d69af3a 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Transparent @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PETG Transparent @base.json @@ -3,7 +3,7 @@ "name": "BETA PETG Transparent @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "BPGB10", + "filament_id": "OFmt513L", "instantiation": "false", "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @base.json b/resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @base.json index 53717f5be3..42fa3bd62b 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @base.json @@ -3,7 +3,7 @@ "name": "BETA PETG UV Color Change @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "BPGB11", + "filament_id": "OFKyNkQz", "instantiation": "false", "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG-CF @base.json b/resources/profiles/BBL/filament/BETA/BETA PETG-CF @base.json index 165d5a56b8..8e3514f0ad 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG-CF @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PETG-CF @base.json @@ -3,7 +3,7 @@ "name": "BETA PETG-CF @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "BPGB12", + "filament_id": "OFtndTHe", "instantiation": "false", "cool_plate_temp": [ "0" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG-GF @base.json b/resources/profiles/BBL/filament/BETA/BETA PETG-GF @base.json index 6261eaa7d2..d530f7a1d7 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG-GF @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PETG-GF @base.json @@ -3,7 +3,7 @@ "name": "BETA PETG-GF @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "BPGB13", + "filament_id": "OFSiCZP3", "instantiation": "false", "cool_plate_temp": [ "0" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Basic @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Basic @base.json index 1653813bc1..429ecceda1 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Basic @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Basic @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Basic @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB00", + "filament_id": "OFuvOt0r", "instantiation": "false", "filament_cost": [ "24.99" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @base.json index cb618e7bd0..5054237514 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Chameleon @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB02", + "filament_id": "OFW8M3CY", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @base.json index 684ce8866f..d9198287aa 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Fluorescence @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB04", + "filament_id": "OF4PKvem", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @base.json index d180d4fb04..545a34dd92 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Glitter @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB05", + "filament_id": "OFcnWTJB", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Glow @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Glow @base.json index 05657ebd86..6be0a9da33 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Glow @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Glow @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Glow @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB06", + "filament_id": "OFGc9l16", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @base.json index f6cb4e3193..9609ff08d3 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Gradient @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB07", + "filament_id": "OF5LAnla", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @base.json index 6f55ffdab8..958b999d91 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Heat Color Change @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB03", + "filament_id": "OFSfm8iP", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @base.json index 604604cb04..7b93695099 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA High Speed @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB20", + "filament_id": "OF3PDEw3", "instantiation": "false", "filament_flow_ratio": [ "0.98" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @base.json index 7ac72d59fa..d900b28794 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA High Temp @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB18", + "filament_id": "OF5BXhHF", "instantiation": "false", "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Marble @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Marble @base.json index c27f1b4fd1..a472446d9a 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Marble @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Marble @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Marble @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB08", + "filament_id": "OFKYBAWe", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Matte @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Matte @base.json index d67331d549..32bd79b43b 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Matte @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Matte @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Matte @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB09", + "filament_id": "OFwc74ck", "instantiation": "false", "filament_cost": [ "24.99" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Metal @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Metal @base.json index 3a5668800d..607e20fa4e 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Metal @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Metal @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Metal @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB10", + "filament_id": "OF03RK6r", "instantiation": "false", "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @base.json index 5c1c8f3ddf..c03bc0a8c7 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Metallic @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB11", + "filament_id": "OFkHbjUv", "instantiation": "false", "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA PRO @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA PRO @base.json index 340b2c88ec..6938382062 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA PRO @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA PRO @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA PRO @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB12", + "filament_id": "OFMzRg65", "instantiation": "false", "filament_cost": [ "24.99" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Silk @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Silk @base.json index fb445eed6b..a0c61acd51 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Silk @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Silk @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Silk @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB13", + "filament_id": "OFeF4UNh", "instantiation": "false", "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @base.json index 3320396323..0bedc9186a 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Silk+ @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB01", + "filament_id": "OF8QdQwS", "instantiation": "false", "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @base.json index ce0c342852..be62c10734 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Transparent @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB14", + "filament_id": "OFJnEaCp", "instantiation": "false", "filament_cost": [ "24.99" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @base.json index 033d1ef2ce..d95a0d8411 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA UV Color Change @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB15", + "filament_id": "OFpdjFI3", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Wood @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Wood @base.json index 471c5709cd..c5eeae9995 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Wood @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Wood @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Wood @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB19", + "filament_id": "OFGVxj2A", "instantiation": "false", "filament_cost": [ "24.99" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Youth @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA Youth @base.json index b63dc707e0..5fa118d566 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Youth @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA Youth @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA Youth @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB16", + "filament_id": "OFF5o7b2", "instantiation": "false", "filament_cost": [ "24.99" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA-CF @base.json b/resources/profiles/BBL/filament/BETA/BETA PLA-CF @base.json index 88028090da..f0f632adfa 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA-CF @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA PLA-CF @base.json @@ -3,7 +3,7 @@ "name": "BETA PLA-CF @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "BPLB17", + "filament_id": "OFLqgSuX", "instantiation": "false", "additional_cooling_fan_speed": [ "0" diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 90A @base.json b/resources/profiles/BBL/filament/BETA/BETA TPU 90A @base.json index 6664874f99..bba256fd74 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 90A @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA TPU 90A @base.json @@ -3,7 +3,7 @@ "name": "BETA TPU 90A @base", "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "BTUB00", + "filament_id": "OF6Yn69v", "instantiation": "false", "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 95A @base.json b/resources/profiles/BBL/filament/BETA/BETA TPU 95A @base.json index 2ec4a56075..87f7757c3f 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 95A @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA TPU 95A @base.json @@ -3,7 +3,7 @@ "name": "BETA TPU 95A @base", "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "BTUB02", + "filament_id": "OFK7830e", "instantiation": "false", "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 98A @base.json b/resources/profiles/BBL/filament/BETA/BETA TPU 98A @base.json index 58ef5a5c21..cd106a6bf6 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 98A @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA TPU 98A @base.json @@ -3,7 +3,7 @@ "name": "BETA TPU 98A @base", "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "BTUB03", + "filament_id": "OFzaq7Yg", "instantiation": "false", "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU Matte @base.json b/resources/profiles/BBL/filament/BETA/BETA TPU Matte @base.json index 20d773373f..272e9be1ed 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU Matte @base.json +++ b/resources/profiles/BBL/filament/BETA/BETA TPU Matte @base.json @@ -3,7 +3,7 @@ "name": "BETA TPU Matte @base", "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "BTUB01", + "filament_id": "OF4QZANi", "instantiation": "false", "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/Bambu ABS @base.json b/resources/profiles/BBL/filament/Bambu ABS @base.json index 4940032f5e..5f395440eb 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @base.json +++ b/resources/profiles/BBL/filament/Bambu ABS @base.json @@ -3,7 +3,7 @@ "name": "Bambu ABS @base", "inherits": "fdm_filament_abs", "from": "system", - "filament_id": "GFB00", + "filament_id": "OFhuaUQB", "instantiation": "false", "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @base.json b/resources/profiles/BBL/filament/Bambu ABS-GF @base.json index b93c7e82cf..a14581034d 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @base.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @base.json @@ -3,7 +3,7 @@ "name": "Bambu ABS-GF @base", "inherits": "fdm_filament_abs", "from": "system", - "filament_id": "GFB50", + "filament_id": "OFknl9Iz", "instantiation": "false", "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_cooling_layer_time": [ diff --git a/resources/profiles/BBL/filament/Bambu ASA @base.json b/resources/profiles/BBL/filament/Bambu ASA @base.json index 31d4c2d758..5e66d50419 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @base.json +++ b/resources/profiles/BBL/filament/Bambu ASA @base.json @@ -3,7 +3,7 @@ "name": "Bambu ASA @base", "inherits": "fdm_filament_asa", "from": "system", - "filament_id": "GFB01", + "filament_id": "OFfBpSRI", "instantiation": "false", "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "eng_plate_temp": [ diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json index 1a36118d7f..43c69be716 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json @@ -3,7 +3,7 @@ "name": "Bambu ASA-Aero @base", "inherits": "fdm_filament_asa", "from": "system", - "filament_id": "GFB02", + "filament_id": "OFXzQ4yL", "instantiation": "false", "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide.", "fan_cooling_layer_time": [ diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @base.json b/resources/profiles/BBL/filament/Bambu ASA-CF @base.json index 69624032bb..bf957889b6 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @base.json @@ -3,7 +3,7 @@ "name": "Bambu ASA-CF @base", "inherits": "fdm_filament_asa", "from": "system", - "filament_id": "GFB51", + "filament_id": "OF0wBGNx", "instantiation": "false", "eng_plate_temp": [ "100" diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @base.json b/resources/profiles/BBL/filament/Bambu PA-CF @base.json index 587812d37b..47e1cc6ae1 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @base.json @@ -3,7 +3,7 @@ "name": "Bambu PA-CF @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFN03", + "filament_id": "OFFNYwWR", "instantiation": "false", "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @base.json b/resources/profiles/BBL/filament/Bambu PA6-CF @base.json index 10737491fe..0bb143c6ef 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @base.json @@ -3,7 +3,7 @@ "name": "Bambu PA6-CF @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFN05", + "filament_id": "OFniMuTN", "instantiation": "false", "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_cooling_layer_time": [ diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @base.json b/resources/profiles/BBL/filament/Bambu PA6-GF @base.json index 1997ec6a1e..2f9a674e54 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @base.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @base.json @@ -3,7 +3,7 @@ "name": "Bambu PA6-GF @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFN08", + "filament_id": "OFNk8bxk", "instantiation": "false", "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_cooling_layer_time": [ diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json index 28b1391f84..80c0599caa 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json @@ -3,7 +3,7 @@ "name": "Bambu PAHT-CF @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFN04", + "filament_id": "OF2VFe4J", "instantiation": "false", "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_cooling_layer_time": [ diff --git a/resources/profiles/BBL/filament/Bambu PC @base.json b/resources/profiles/BBL/filament/Bambu PC @base.json index 4bf37c3adb..ee235b17d6 100644 --- a/resources/profiles/BBL/filament/Bambu PC @base.json +++ b/resources/profiles/BBL/filament/Bambu PC @base.json @@ -3,7 +3,7 @@ "name": "Bambu PC @base", "inherits": "fdm_filament_pc", "from": "system", - "filament_id": "GFC00", + "filament_id": "OFKhMPeX", "instantiation": "false", "filament_vendor": [ "Bambu Lab" diff --git a/resources/profiles/BBL/filament/Bambu PC FR @base.json b/resources/profiles/BBL/filament/Bambu PC FR @base.json index 5c10a4e424..0ee463d08f 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @base.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @base.json @@ -3,7 +3,7 @@ "name": "Bambu PC FR @base", "inherits": "fdm_filament_pc", "from": "system", - "filament_id": "GFC01", + "filament_id": "OFg57Nmc", "instantiation": "false", "filament_cost": [ "0" diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @base.json b/resources/profiles/BBL/filament/Bambu PET-CF @base.json index ff8b40070f..c84d423f0e 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @base.json @@ -3,7 +3,7 @@ "name": "Bambu PET-CF @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "GFT01", + "filament_id": "OFHa48An", "instantiation": "false", "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json index fd33eb2191..619483a4b4 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json @@ -3,7 +3,7 @@ "name": "Bambu PETG Basic @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "GFG00", + "filament_id": "OFFvzqcd", "instantiation": "false", "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @base.json b/resources/profiles/BBL/filament/Bambu PETG HF @base.json index e05c34035b..1c12d679fd 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @base.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @base.json @@ -3,7 +3,7 @@ "name": "Bambu PETG HF @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "GFG02", + "filament_id": "OFovEIbw", "instantiation": "false", "cool_plate_temp": [ "0" diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json index 8cb30c5583..372c2e5c26 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json @@ -3,7 +3,7 @@ "name": "Bambu PETG Translucent @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "GFG01", + "filament_id": "OFwPrlCM", "instantiation": "false", "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @base.json b/resources/profiles/BBL/filament/Bambu PETG-CF @base.json index da39340dcb..9c1d80768d 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @base.json @@ -3,7 +3,7 @@ "name": "Bambu PETG-CF @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "GFG50", + "filament_id": "OFTRZ8Y4", "instantiation": "false", "cool_plate_temp": [ "0" diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json index ea1315636a..b941bed495 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Aero @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA11", + "filament_id": "OFBSW57R", "instantiation": "false", "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero).", "fan_min_speed": [ diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json index f05bdb20e4..6d25d0ece0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Basic @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA00", + "filament_id": "OFoiVqVM", "instantiation": "false", "filament_cost": [ "24.99" diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @base.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @base.json index a5a1306eef..b21b156082 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Dynamic @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA13", + "filament_id": "OFDGigEI", "instantiation": "false", "filament_cost": [ "31.99" diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @base.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @base.json index 046610b2e2..baeb6a1ab8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Galaxy @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA15", + "filament_id": "OFQ3e56w", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @base.json b/resources/profiles/BBL/filament/Bambu PLA Glow @base.json index 005d759df2..7556361f81 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Glow @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA12", + "filament_id": "OFEkPBwx", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @base.json b/resources/profiles/BBL/filament/Bambu PLA Lite @base.json index 72c3bb4e4f..4a21717d9e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Lite @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA18", + "filament_id": "OFnfxTvi", "instantiation": "false", "filament_cost": [ "0" diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @base.json b/resources/profiles/BBL/filament/Bambu PLA Marble @base.json index 6dd5f815dc..4c9ecb2ff5 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Marble @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA07", + "filament_id": "OF9OlTWH", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json index 15fb527bde..e98b6c3633 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Matte @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA01", + "filament_id": "OFXIbw5D", "instantiation": "false", "filament_cost": [ "24.99" diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json index 630ffcd61f..9a12d97f4d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Metal @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA02", + "filament_id": "OFrKLeE3", "instantiation": "false", "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @base.json b/resources/profiles/BBL/filament/Bambu PLA Pure @base.json index ae1b796a47..f947b2efaa 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Pure @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA19", + "filament_id": "OFTHDCqA", "instantiation": "false", "filament_cost": [ "21.99" diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json index cfe83dabdd..da20a689ee 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Silk @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA05", + "filament_id": "OFEGNJD4", "instantiation": "false", "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @base.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @base.json index c81147eb58..17a7e21b79 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Silk+ @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA06", + "filament_id": "OFUanySo", "instantiation": "false", "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json index ae49d594fd..6ecad9584e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Sparkle @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA08", + "filament_id": "OFDxfPgH", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json index 9710767264..09b71a842d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Tough @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA09", + "filament_id": "OFaQMgRH", "instantiation": "false", "filament_cost": [ "28.99" diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @base.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @base.json index 9b1b0b167e..ccc534d02f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Tough+ @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA10", + "filament_id": "OF342jVN", "instantiation": "false", "additional_cooling_fan_speed": [ "80" diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @base.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @base.json index d32d781e70..ada0a501fc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Translucent @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA17", + "filament_id": "OFFbSnCD", "instantiation": "false", "filament_cost": [ "24.99" diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @base.json b/resources/profiles/BBL/filament/Bambu PLA Wood @base.json index 882e00dc0a..3ba638569b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA Wood @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA16", + "filament_id": "OFMjtqTC", "instantiation": "false", "filament_cost": [ "24.99" diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json index e24e6a11af..5567889cae 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json @@ -3,7 +3,7 @@ "name": "Bambu PLA-CF @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFA50", + "filament_id": "OFEswT5W", "instantiation": "false", "additional_cooling_fan_speed": [ "0" diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @base.json b/resources/profiles/BBL/filament/Bambu PPA-CF @base.json index a7efc6a3c3..48355afad1 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @base.json @@ -3,7 +3,7 @@ "name": "Bambu PPA-CF @base", "inherits": "fdm_filament_ppa", "from": "system", - "filament_id": "GFN06", + "filament_id": "OF54B0S0", "instantiation": "false", "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "impact_strength_z": [ diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @base.json b/resources/profiles/BBL/filament/Bambu PPS-CF @base.json index a94234bb34..3985fcbe02 100644 --- a/resources/profiles/BBL/filament/Bambu PPS-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PPS-CF @base.json @@ -3,7 +3,7 @@ "name": "Bambu PPS-CF @base", "inherits": "fdm_filament_pps", "from": "system", - "filament_id": "GFT02", + "filament_id": "OF4RvVuU", "instantiation": "false", "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_max_speed": [ diff --git a/resources/profiles/BBL/filament/Bambu PVA @base.json b/resources/profiles/BBL/filament/Bambu PVA @base.json index fea0298ccc..1c6e0f2201 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @base.json +++ b/resources/profiles/BBL/filament/Bambu PVA @base.json @@ -3,7 +3,7 @@ "name": "Bambu PVA @base", "inherits": "fdm_filament_pva", "from": "system", - "filament_id": "GFS04", + "filament_id": "OFzyIxba", "instantiation": "false", "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json index d199cdb0a0..70724ff11f 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json @@ -3,7 +3,7 @@ "name": "Bambu Support For PA/PET @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFS03", + "filament_id": "OFMTK0UC", "instantiation": "false", "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "fan_cooling_layer_time": [ diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json index 9bfdef5bf9..495291a3cf 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json @@ -3,7 +3,7 @@ "name": "Bambu Support For PLA @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFS02", + "filament_id": "OFAnyRUI", "instantiation": "false", "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json index 38443f5be3..6a6ff6aa6b 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json @@ -3,7 +3,7 @@ "name": "Bambu Support For PLA/PETG @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFS05", + "filament_id": "OFIfnzxC", "instantiation": "false", "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "fan_cooling_layer_time": [ diff --git a/resources/profiles/BBL/filament/Bambu Support G @base.json b/resources/profiles/BBL/filament/Bambu Support G @base.json index 9cb01972b8..38c7f500f5 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @base.json +++ b/resources/profiles/BBL/filament/Bambu Support G @base.json @@ -3,7 +3,7 @@ "name": "Bambu Support G @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFS01", + "filament_id": "OFQHiNJs", "instantiation": "false", "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "fan_cooling_layer_time": [ diff --git a/resources/profiles/BBL/filament/Bambu Support W @base.json b/resources/profiles/BBL/filament/Bambu Support W @base.json index e847cd1865..1391587ef0 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @base.json +++ b/resources/profiles/BBL/filament/Bambu Support W @base.json @@ -3,7 +3,7 @@ "name": "Bambu Support W @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFS00", + "filament_id": "OFsHSVZc", "instantiation": "false", "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @base.json b/resources/profiles/BBL/filament/Bambu Support for ABS @base.json index bc8867db2a..25f62a07c3 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @base.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @base.json @@ -3,7 +3,7 @@ "name": "Bambu Support for ABS @base", "inherits": "fdm_filament_abs", "from": "system", - "filament_id": "GFS06", + "filament_id": "OFf6mfQO", "instantiation": "false", "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", "fan_max_speed": [ diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @base.json b/resources/profiles/BBL/filament/Bambu TPU 85A @base.json index bc8c9f698c..fc7f67bc45 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @base.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @base.json @@ -3,7 +3,7 @@ "name": "Bambu TPU 85A @base", "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "GFU04", + "filament_id": "OFlfuj2k", "instantiation": "false", "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @base.json b/resources/profiles/BBL/filament/Bambu TPU 90A @base.json index 191d06e562..2f2ae95b02 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @base.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @base.json @@ -3,7 +3,7 @@ "name": "Bambu TPU 90A @base", "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "GFU03", + "filament_id": "OFtkLO6q", "instantiation": "false", "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json index 2670e250e9..7d94b0256c 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json @@ -3,7 +3,7 @@ "name": "Bambu TPU 95A @base", "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "GFU01", + "filament_id": "OFVCkX5w", "instantiation": "false", "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json index 7610fa2bf3..9f977eb5b2 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json @@ -3,7 +3,7 @@ "name": "Bambu TPU 95A HF @base", "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "GFU00", + "filament_id": "OFvKUnLh", "instantiation": "false", "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json index 21a1e70fea..5f0b03329f 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json @@ -3,7 +3,7 @@ "name": "Bambu TPU for AMS @base", "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "GFU02", + "filament_id": "OFIBbYO5", "instantiation": "false", "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.", "fan_cooling_layer_time": [ diff --git a/resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @base.json b/resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @base.json index e9e45915f4..95a8fd47ea 100644 --- a/resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @base.json +++ b/resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @base.json @@ -3,7 +3,7 @@ "name": "FusRock ABS-GF @base", "inherits": "fdm_filament_common", "from": "system", - "filament_id": "GFR00", + "filament_id": "OFmn9NZL", "instantiation": "false", "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials（https://wiki.fusrock.com）.", "filament_extruder_variant": [ diff --git a/resources/profiles/BBL/filament/Generic ABS @base.json b/resources/profiles/BBL/filament/Generic ABS @base.json index 4a30d790f8..d15a7cdfea 100644 --- a/resources/profiles/BBL/filament/Generic ABS @base.json +++ b/resources/profiles/BBL/filament/Generic ABS @base.json @@ -3,7 +3,7 @@ "name": "Generic ABS @base", "inherits": "fdm_filament_abs", "from": "system", - "filament_id": "GFB99", + "filament_id": "OFY9muEs", "instantiation": "false", "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "filament_flow_ratio": [ diff --git a/resources/profiles/BBL/filament/Generic ASA @base.json b/resources/profiles/BBL/filament/Generic ASA @base.json index e1acd0504d..699fc64f7c 100644 --- a/resources/profiles/BBL/filament/Generic ASA @base.json +++ b/resources/profiles/BBL/filament/Generic ASA @base.json @@ -3,7 +3,7 @@ "name": "Generic ASA @base", "inherits": "fdm_filament_asa", "from": "system", - "filament_id": "GFB98", + "filament_id": "OFLPAxz3", "instantiation": "false", "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "eng_plate_temp": [ diff --git a/resources/profiles/BBL/filament/Generic BVOH @base.json b/resources/profiles/BBL/filament/Generic BVOH @base.json index 848e67c6c9..4a0fdf358e 100644 --- a/resources/profiles/BBL/filament/Generic BVOH @base.json +++ b/resources/profiles/BBL/filament/Generic BVOH @base.json @@ -3,7 +3,7 @@ "name": "Generic BVOH @base", "inherits": "fdm_filament_bvoh", "from": "system", - "filament_id": "GFS97", + "filament_id": "OFo2UF2C", "instantiation": "false", "filament_adhesiveness_category": [ "797" diff --git a/resources/profiles/BBL/filament/Generic EVA @base.json b/resources/profiles/BBL/filament/Generic EVA @base.json index 8799903ab5..79308d5d37 100644 --- a/resources/profiles/BBL/filament/Generic EVA @base.json +++ b/resources/profiles/BBL/filament/Generic EVA @base.json @@ -3,7 +3,7 @@ "name": "Generic EVA @base", "inherits": "fdm_filament_eva", "from": "system", - "filament_id": "GFR99", + "filament_id": "OFCD8qiU", "instantiation": "false", "additional_cooling_fan_speed": [ "70" diff --git a/resources/profiles/BBL/filament/Generic HIPS @base.json b/resources/profiles/BBL/filament/Generic HIPS @base.json index c4147f8098..a0df005ecc 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @base.json +++ b/resources/profiles/BBL/filament/Generic HIPS @base.json @@ -3,7 +3,7 @@ "name": "Generic HIPS @base", "inherits": "fdm_filament_hips", "from": "system", - "filament_id": "GFS98", + "filament_id": "OFsFon5l", "instantiation": "false", "filament_is_support": [ "1" diff --git a/resources/profiles/BBL/filament/Generic PA @base.json b/resources/profiles/BBL/filament/Generic PA @base.json index fe819487b0..e6dad20449 100644 --- a/resources/profiles/BBL/filament/Generic PA @base.json +++ b/resources/profiles/BBL/filament/Generic PA @base.json @@ -3,7 +3,7 @@ "name": "Generic PA @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFN99", + "filament_id": "OFg8ndtj", "instantiation": "false", "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "chamber_temperatures": [ diff --git a/resources/profiles/BBL/filament/Generic PA-CF @base.json b/resources/profiles/BBL/filament/Generic PA-CF @base.json index 6fdbd0c8bb..7c77ffe482 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PA-CF @base.json @@ -3,7 +3,7 @@ "name": "Generic PA-CF @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFN98", + "filament_id": "OFQLcbps", "instantiation": "false", "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_cooling_layer_time": [ diff --git a/resources/profiles/BBL/filament/Generic PC @base.json b/resources/profiles/BBL/filament/Generic PC @base.json index a98c5a4183..b61c2296b5 100644 --- a/resources/profiles/BBL/filament/Generic PC @base.json +++ b/resources/profiles/BBL/filament/Generic PC @base.json @@ -3,7 +3,7 @@ "name": "Generic PC @base", "inherits": "fdm_filament_pc", "from": "system", - "filament_id": "GFC99", + "filament_id": "OFLakOUI", "instantiation": "false", "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "filament_flow_ratio": [ diff --git a/resources/profiles/BBL/filament/Generic PCTG @base.json b/resources/profiles/BBL/filament/Generic PCTG @base.json index e8b7c1ce0a..2eea3496a3 100644 --- a/resources/profiles/BBL/filament/Generic PCTG @base.json +++ b/resources/profiles/BBL/filament/Generic PCTG @base.json @@ -3,7 +3,7 @@ "name": "Generic PCTG @base", "inherits": "fdm_filament_pctg", "from": "system", - "filament_id": "GFG97", + "filament_id": "OFu1evlr", "instantiation": "false", "cool_plate_temp": [ "0" diff --git a/resources/profiles/BBL/filament/Generic PE @base.json b/resources/profiles/BBL/filament/Generic PE @base.json index 22a5162c90..d9bdfc84a5 100644 --- a/resources/profiles/BBL/filament/Generic PE @base.json +++ b/resources/profiles/BBL/filament/Generic PE @base.json @@ -3,7 +3,7 @@ "name": "Generic PE @base", "inherits": "fdm_filament_pe", "from": "system", - "filament_id": "GFP99", + "filament_id": "OFPklMI1", "instantiation": "false", "filament_cost": [ "40.99" diff --git a/resources/profiles/BBL/filament/Generic PE-CF @base.json b/resources/profiles/BBL/filament/Generic PE-CF @base.json index 6dafa3535a..655a30e41e 100644 --- a/resources/profiles/BBL/filament/Generic PE-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PE-CF @base.json @@ -3,7 +3,7 @@ "name": "Generic PE-CF @base", "inherits": "fdm_filament_pe", "from": "system", - "filament_id": "GFP98", + "filament_id": "OFd0Fv0k", "instantiation": "false", "filament_cost": [ "65.99" diff --git a/resources/profiles/BBL/filament/Generic PETG @base.json b/resources/profiles/BBL/filament/Generic PETG @base.json index 8d59f692a3..9fce0893ce 100644 --- a/resources/profiles/BBL/filament/Generic PETG @base.json +++ b/resources/profiles/BBL/filament/Generic PETG @base.json @@ -3,7 +3,7 @@ "name": "Generic PETG @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "GFG99", + "filament_id": "OFYPdQJh", "instantiation": "false", "cool_plate_temp": [ "0" diff --git a/resources/profiles/BBL/filament/Generic PETG HF @base.json b/resources/profiles/BBL/filament/Generic PETG HF @base.json index 6a5ce9f063..c756285013 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @base.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @base.json @@ -3,7 +3,7 @@ "name": "Generic PETG HF @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "GFG96", + "filament_id": "OF7lOgYF", "instantiation": "false", "cool_plate_temp": [ "0" diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @base.json b/resources/profiles/BBL/filament/Generic PETG-CF @base.json index c1d7338bd4..4f2f6ed3f9 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @base.json @@ -3,7 +3,7 @@ "name": "Generic PETG-CF @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "GFG98", + "filament_id": "OFoYSJKi", "instantiation": "false", "cool_plate_temp": [ "0" diff --git a/resources/profiles/BBL/filament/Generic PHA @base.json b/resources/profiles/BBL/filament/Generic PHA @base.json index 8e3a7e5f6a..fe2373ff7c 100644 --- a/resources/profiles/BBL/filament/Generic PHA @base.json +++ b/resources/profiles/BBL/filament/Generic PHA @base.json @@ -3,6 +3,6 @@ "name": "Generic PHA @base", "inherits": "fdm_filament_pha", "from": "system", - "filament_id": "GFR98", + "filament_id": "OF74KeQR", "instantiation": "false" } diff --git a/resources/profiles/BBL/filament/Generic PLA @base.json b/resources/profiles/BBL/filament/Generic PLA @base.json index f5c584bc3e..8e166fe212 100644 --- a/resources/profiles/BBL/filament/Generic PLA @base.json +++ b/resources/profiles/BBL/filament/Generic PLA @base.json @@ -3,7 +3,7 @@ "name": "Generic PLA @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL99", + "filament_id": "OFDSrzZ8", "instantiation": "false", "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", "filament_flow_ratio": [ diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @base.json b/resources/profiles/BBL/filament/Generic PLA High Speed @base.json index f03e30f5ec..9fd751ae44 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @base.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @base.json @@ -3,7 +3,7 @@ "name": "Generic PLA High Speed @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL95", + "filament_id": "OFmpMwxS", "instantiation": "false", "filament_flow_ratio": [ "0.98" diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @base.json b/resources/profiles/BBL/filament/Generic PLA Silk @base.json index 4dfe033cb3..41bc486e88 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @base.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @base.json @@ -3,7 +3,7 @@ "name": "Generic PLA Silk @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL96", + "filament_id": "OFesA6rF", "instantiation": "false", "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_flow_ratio": [ diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @base.json b/resources/profiles/BBL/filament/Generic PLA-CF @base.json index 8f59df41a8..ffbcaad864 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @base.json @@ -3,7 +3,7 @@ "name": "Generic PLA-CF @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL98", + "filament_id": "OFWbdGsC", "instantiation": "false", "additional_cooling_fan_speed": [ "0" diff --git a/resources/profiles/BBL/filament/Generic PP @base.json b/resources/profiles/BBL/filament/Generic PP @base.json index 14c266404a..94847d67e9 100644 --- a/resources/profiles/BBL/filament/Generic PP @base.json +++ b/resources/profiles/BBL/filament/Generic PP @base.json @@ -3,6 +3,6 @@ "name": "Generic PP @base", "inherits": "fdm_filament_pp", "from": "system", - "filament_id": "GFP97", + "filament_id": "OF1UNk9P", "instantiation": "false" } diff --git a/resources/profiles/BBL/filament/Generic PP-CF @base.json b/resources/profiles/BBL/filament/Generic PP-CF @base.json index 307793d371..e04ee56b6d 100644 --- a/resources/profiles/BBL/filament/Generic PP-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PP-CF @base.json @@ -3,7 +3,7 @@ "name": "Generic PP-CF @base", "inherits": "fdm_filament_pp", "from": "system", - "filament_id": "GFP96", + "filament_id": "OFXkm8q1", "instantiation": "false", "filament_cost": [ "77.99" diff --git a/resources/profiles/BBL/filament/Generic PP-GF @base.json b/resources/profiles/BBL/filament/Generic PP-GF @base.json index d17fa31d68..5d82e8223a 100644 --- a/resources/profiles/BBL/filament/Generic PP-GF @base.json +++ b/resources/profiles/BBL/filament/Generic PP-GF @base.json @@ -3,7 +3,7 @@ "name": "Generic PP-GF @base", "inherits": "fdm_filament_pp", "from": "system", - "filament_id": "GFP95", + "filament_id": "OFsijjtH", "instantiation": "false", "filament_cost": [ "59.99" diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @base.json b/resources/profiles/BBL/filament/Generic PPA-CF @base.json index 6287533414..78ad9bca5e 100644 --- a/resources/profiles/BBL/filament/Generic PPA-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PPA-CF @base.json @@ -3,7 +3,7 @@ "name": "Generic PPA-CF @base", "inherits": "fdm_filament_ppa", "from": "system", - "filament_id": "GFN97", + "filament_id": "OF8tPByX", "instantiation": "false", "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "filament_max_volumetric_speed": [ diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @base.json b/resources/profiles/BBL/filament/Generic PPA-GF @base.json index 6220abbeef..72ff99cd16 100644 --- a/resources/profiles/BBL/filament/Generic PPA-GF @base.json +++ b/resources/profiles/BBL/filament/Generic PPA-GF @base.json @@ -3,7 +3,7 @@ "name": "Generic PPA-GF @base", "inherits": "fdm_filament_ppa", "from": "system", - "filament_id": "GFN96", + "filament_id": "OF8Tlg47", "instantiation": "false", "filament_max_volumetric_speed": [ "6" diff --git a/resources/profiles/BBL/filament/Generic PPS @base.json b/resources/profiles/BBL/filament/Generic PPS @base.json index 882fea94e0..08ba73cba8 100644 --- a/resources/profiles/BBL/filament/Generic PPS @base.json +++ b/resources/profiles/BBL/filament/Generic PPS @base.json @@ -3,7 +3,7 @@ "name": "Generic PPS @base", "inherits": "fdm_filament_pps", "from": "system", - "filament_id": "GFT97", + "filament_id": "OFq9svOz", "instantiation": "false", "filament_dev_chamber_drying_bed_temperature": [ "90" diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @base.json b/resources/profiles/BBL/filament/Generic PPS-CF @base.json index f003a7b470..76aab2de8b 100644 --- a/resources/profiles/BBL/filament/Generic PPS-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PPS-CF @base.json @@ -3,7 +3,7 @@ "name": "Generic PPS-CF @base", "inherits": "fdm_filament_pps", "from": "system", - "filament_id": "GFT98", + "filament_id": "OF6rdQ6M", "instantiation": "false", "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "fan_max_speed": [ diff --git a/resources/profiles/BBL/filament/Generic PVA @base.json b/resources/profiles/BBL/filament/Generic PVA @base.json index ca3dae82a4..4021f07f45 100644 --- a/resources/profiles/BBL/filament/Generic PVA @base.json +++ b/resources/profiles/BBL/filament/Generic PVA @base.json @@ -3,7 +3,7 @@ "name": "Generic PVA @base", "inherits": "fdm_filament_pva", "from": "system", - "filament_id": "GFS99", + "filament_id": "OFDvXujf", "instantiation": "false", "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", "filament_flow_ratio": [ diff --git a/resources/profiles/BBL/filament/Generic SBS @base.json b/resources/profiles/BBL/filament/Generic SBS @base.json index 6decbf2213..fbf9b8a403 100644 --- a/resources/profiles/BBL/filament/Generic SBS @base.json +++ b/resources/profiles/BBL/filament/Generic SBS @base.json @@ -3,7 +3,7 @@ "name": "Generic SBS @base", "inherits": "fdm_filament_sbs", "from": "system", - "filament_id": "GFLSBS99", + "filament_id": "OFhQfUQY", "instantiation": "false", "filament_flow_ratio": [ "0.98" diff --git a/resources/profiles/BBL/filament/Generic SBS.json b/resources/profiles/BBL/filament/Generic SBS.json index 2e38a46fde..ffa36a9abb 100644 --- a/resources/profiles/BBL/filament/Generic SBS.json +++ b/resources/profiles/BBL/filament/Generic SBS.json @@ -4,7 +4,7 @@ "inherits": "Generic SBS @base", "from": "system", "setting_id": "BFLSBS99-1", - "filament_id": "BFLSBS99", + "filament_id": "OFhQfUQY", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Generic TPU @base.json b/resources/profiles/BBL/filament/Generic TPU @base.json index 78fe4c1b1a..f2bc7049aa 100644 --- a/resources/profiles/BBL/filament/Generic TPU @base.json +++ b/resources/profiles/BBL/filament/Generic TPU @base.json @@ -3,7 +3,7 @@ "name": "Generic TPU @base", "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "GFU99", + "filament_id": "OFgbpcy9", "instantiation": "false", "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_max_volumetric_speed": [ diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @base.json b/resources/profiles/BBL/filament/Generic TPU for AMS @base.json index eb42aa3df2..1432bdfbe2 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @base.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @base.json @@ -3,7 +3,7 @@ "name": "Generic TPU for AMS @base", "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "GFU98", + "filament_id": "OFmN2lvw", "instantiation": "false", "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @base.json b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @base.json index 91080469cd..b77157064b 100644 --- a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @base.json +++ b/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @base.json @@ -3,7 +3,7 @@ "name": "Numakers PLA+ @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFNMK00", + "filament_id": "OFqGRZyH", "instantiation": "false", "filament_cost": [ "20.99" diff --git a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @base.json b/resources/profiles/BBL/filament/Overture/Overture Matte PLA @base.json index 469116c778..bccfb1f17b 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @base.json +++ b/resources/profiles/BBL/filament/Overture/Overture Matte PLA @base.json @@ -3,7 +3,7 @@ "name": "Overture Matte PLA @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL05", + "filament_id": "OFBw6eEG", "instantiation": "false", "filament_cost": [ "24.52" diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA @base.json b/resources/profiles/BBL/filament/Overture/Overture PLA @base.json index c31f99f8c8..0f302d4798 100644 --- a/resources/profiles/BBL/filament/Overture/Overture PLA @base.json +++ b/resources/profiles/BBL/filament/Overture/Overture PLA @base.json @@ -3,7 +3,7 @@ "name": "Overture PLA @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL04", + "filament_id": "OFc3xdm9", "instantiation": "false", "filament_cost": [ "24.15" diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @base.json b/resources/profiles/BBL/filament/Overture/Overture PLA Pro @base.json index 80525e03b2..454c36e7b0 100644 --- a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @base.json +++ b/resources/profiles/BBL/filament/Overture/Overture PLA Pro @base.json @@ -3,7 +3,7 @@ "name": "Overture PLA Pro @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFOT001", + "filament_id": "OFxA1p01", "instantiation": "false", "filament_cost": [ "26.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @base.json index d98490f1d7..a5aa03bf9b 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @base.json @@ -3,7 +3,7 @@ "name": "Fiberon PA12-CF @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFL52", + "filament_id": "OFX0ycRQ", "instantiation": "false", "eng_plate_temp": [ "40" diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF10 @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF10 @base.json index 368abf5570..674d5acb38 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF10 @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF10 @base.json @@ -3,7 +3,7 @@ "name": "Fiberon PA12-CF10 @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFL56", + "filament_id": "OFvxIS9g", "instantiation": "false", "bed_type": [ "Cool Plate" diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @base.json index d0424d164b..823e8a0ff1 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @base.json @@ -3,7 +3,7 @@ "name": "Fiberon PA6-CF @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFL50", + "filament_id": "OFkOviHk", "instantiation": "false", "eng_plate_temp": [ "40" diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF20 @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF20 @base.json index 65fee6a5bb..f28ee154b8 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF20 @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF20 @base.json @@ -3,7 +3,7 @@ "name": "Fiberon PA6-CF20 @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFL57", + "filament_id": "OFEabreg", "instantiation": "false", "bed_type": [ "Cool Plate" diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @base.json index 6ad501fdfc..607b1c8e00 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @base.json @@ -3,7 +3,7 @@ "name": "Fiberon PA6-GF @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFL51", + "filament_id": "OFwaYjL6", "instantiation": "false", "eng_plate_temp": [ "40" diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF25 @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF25 @base.json index af2b6d92e1..426e4175db 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF25 @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF25 @base.json @@ -3,7 +3,7 @@ "name": "Fiberon PA6-GF25 @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFL58", + "filament_id": "OF5B9sUc", "instantiation": "false", "bed_type": [ "Cool Plate" diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @base.json index bd7d52f415..3765f754f5 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @base.json @@ -3,7 +3,7 @@ "name": "Fiberon PA612-CF @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFL53", + "filament_id": "OFS2tn6G", "instantiation": "false", "fan_cooling_layer_time": [ "5" diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF15 @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF15 @base.json index dc7194aad0..310a2229d9 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF15 @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF15 @base.json @@ -3,7 +3,7 @@ "name": "Fiberon PA612-CF15 @base", "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "GFL59", + "filament_id": "OFcBl0nJ", "instantiation": "false", "bed_type": [ "Cool Plate" diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @base.json index 365ebb2fd7..2ca2a42d04 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @base.json @@ -3,7 +3,7 @@ "name": "Fiberon PET-CF @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "GFL54", + "filament_id": "OFHWSM21", "instantiation": "false", "cool_plate_temp": [ "0" diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF17 @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF17 @base.json index adcbf5c9ef..d55b7d2daf 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF17 @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF17 @base.json @@ -3,7 +3,7 @@ "name": "Fiberon PET-CF17 @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "GFL60", + "filament_id": "OFAc0Pr3", "instantiation": "false", "bed_type": [ "Cool Plate" diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @base.json index 11c846ff78..b459cc68a1 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @base.json @@ -3,7 +3,7 @@ "name": "Fiberon PETG-ESD @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "GFL06", + "filament_id": "OFcytyoA", "instantiation": "false", "cool_plate_temp": [ "0" diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @base.json index f5674437e8..f052304624 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @base.json @@ -3,7 +3,7 @@ "name": "Fiberon PETG-rCF @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "GFL55", + "filament_id": "OFk8t9mz", "instantiation": "false", "cool_plate_temp": [ "0" diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF08 @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF08 @base.json index da9cdeb43c..fe8eca06cb 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF08 @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF08 @base.json @@ -3,7 +3,7 @@ "name": "Fiberon PETG-rCF08 @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "GFL61", + "filament_id": "OFw4WD4T", "instantiation": "false", "bed_type": [ "Cool Plate" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @base.json index b79b34db77..e3e21d17a1 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @base.json @@ -3,7 +3,7 @@ "name": "Panchroma CoPE @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM016", + "filament_id": "OFqw2PQA", "instantiation": "false", "filament_cost": [ "19.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @base.json index 284ad94032..5f4c2682db 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @base.json @@ -3,7 +3,7 @@ "name": "Panchroma PLA @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM001", + "filament_id": "OFsRDvTM", "instantiation": "false", "filament_cost": [ "19.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @base.json index 5a1bfdd22a..18382eb7a0 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @base.json @@ -3,7 +3,7 @@ "name": "Panchroma PLA Celestial @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM008", + "filament_id": "OFRiYgMK", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @base.json index 6cc9094d1a..bf84a536a4 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @base.json @@ -3,7 +3,7 @@ "name": "Panchroma PLA Galaxy @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM007", + "filament_id": "OFFkCLBl", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @base.json index c1ded4c198..ab3032ad57 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @base.json @@ -3,7 +3,7 @@ "name": "Panchroma PLA Glow @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM010", + "filament_id": "OF0gGRWk", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @base.json index 8c9a74ad88..14a805212e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @base.json @@ -3,7 +3,7 @@ "name": "Panchroma PLA Luminous @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM011", + "filament_id": "OF0kCNDK", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @base.json index cf1574fa9c..63680ba1b7 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @base.json @@ -3,7 +3,7 @@ "name": "Panchroma PLA Marble @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM003", + "filament_id": "OFKiSMWR", "instantiation": "false", "filament_cost": [ "21.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @base.json index 71dda06b1e..33d880ac08 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @base.json @@ -3,7 +3,7 @@ "name": "Panchroma PLA Matte @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM002", + "filament_id": "OFrOh600", "instantiation": "false", "filament_cost": [ "20.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @base.json index 6cda256ff4..89ce745162 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @base.json @@ -3,7 +3,7 @@ "name": "Panchroma PLA Metallic @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM012", + "filament_id": "OFjb0wos", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @base.json index 3d8f857e56..bd8f5fc0d6 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @base.json @@ -3,7 +3,7 @@ "name": "Panchroma PLA Neon @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM013", + "filament_id": "OFO1GEq6", "instantiation": "false", "filament_cost": [ "24.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @base.json index 6af2ad1bbe..c8ef69cf88 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @base.json @@ -3,7 +3,7 @@ "name": "Panchroma PLA Satin @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM005", + "filament_id": "OFPkCJKE", "instantiation": "false", "filament_cost": [ "20.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @base.json index b21d127b41..94c2cb7c0b 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @base.json @@ -3,7 +3,7 @@ "name": "Panchroma PLA Silk @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM004", + "filament_id": "OFS8lTQt", "instantiation": "false", "filament_cost": [ "24.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @base.json index 57ddbd09b3..8622a109f2 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @base.json @@ -3,7 +3,7 @@ "name": "Panchroma PLA Starlight @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM009", + "filament_id": "OFC78WGQ", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @base.json index 322f91be2b..d0d6f6b057 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @base.json @@ -3,7 +3,7 @@ "name": "Panchroma PLA Temp Shift @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM015", + "filament_id": "OFhASRWj", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @base.json index 7c7e5eedb7..ac8842d912 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @base.json @@ -3,7 +3,7 @@ "name": "Panchroma PLA Translucent @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM006", + "filament_id": "OFCIUsWh", "instantiation": "false", "filament_cost": [ "24.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @base.json index 5ab8d5b81c..986b46fd5d 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @base.json @@ -3,7 +3,7 @@ "name": "Panchroma PLA UV Shift @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM014", + "filament_id": "OF1N1qMK", "instantiation": "false", "filament_cost": [ "29.99" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @base.json index 8e1ec42a79..11be66397d 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @base.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @base.json @@ -3,7 +3,7 @@ "name": "PolyLite ABS @base", "inherits": "fdm_filament_abs", "from": "system", - "filament_id": "GFB60", + "filament_id": "OFOvv91M", "instantiation": "false", "filament_cost": [ "26.9" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @base.json index 88e453e0e5..026efbfb61 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @base.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @base.json @@ -3,7 +3,7 @@ "name": "PolyLite ASA @base", "inherits": "fdm_filament_asa", "from": "system", - "filament_id": "GFB61", + "filament_id": "OFvrXuV7", "instantiation": "false", "eng_plate_temp": [ "100" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @base.json index 18f38f0c68..92739d13bb 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @base.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @base.json @@ -3,7 +3,7 @@ "name": "PolyLite CosPLA @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL62", + "filament_id": "OFJgijky", "instantiation": "false", "bed_type": [ "Cool Plate" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @base.json index 87e9a1194a..365f5f1460 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @base.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @base.json @@ -3,7 +3,7 @@ "name": "PolyLite PETG @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "GFG60", + "filament_id": "OF0UJcb6", "instantiation": "false", "cool_plate_temp": [ "0" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @base.json index cbfe608b4e..55ea664946 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @base.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @base.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL00", + "filament_id": "OF5CgdDq", "instantiation": "false", "filament_cost": [ "25.4" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @base.json index 9480b33392..90996083f1 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @base.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @base.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Galaxy @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL63", + "filament_id": "OFvyB0Bz", "instantiation": "false", "bed_type": [ "Cool Plate" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @base.json index ab4b717dbb..3a70d3a83f 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @base.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @base.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Glow @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL64", + "filament_id": "OF5umxxT", "instantiation": "false", "bed_type": [ "Cool Plate" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @base.json index a6bb2746c1..14131c0348 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @base.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @base.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Luminous @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL65", + "filament_id": "OFBoSWxb", "instantiation": "false", "bed_type": [ "Cool Plate" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @base.json index 5a0ec60465..b9fc01a700 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @base.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @base.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Neon @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL66", + "filament_id": "OFitS8al", "instantiation": "false", "bed_type": [ "Cool Plate" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @base.json index bf2867a702..93c6cf8c9f 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @base.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @base.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Pro @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM019", + "filament_id": "OFF9OKoY", "instantiation": "false", "filament_cost": [ "24.99" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @base.json index ecc73602c3..3c8a79ed3f 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @base.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @base.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Starlight @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL67", + "filament_id": "OFIxOuOu", "instantiation": "false", "bed_type": [ "Cool Plate" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @base.json index f5f9c89720..9a6155e283 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @base.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @base.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Translucent @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL68", + "filament_id": "OFy02QHU", "instantiation": "false", "bed_type": [ "Cool Plate" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @base.json b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @base.json index e844afc545..3b13c5b55c 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @base.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @base.json @@ -3,7 +3,7 @@ "name": "PolyTerra PLA @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL01", + "filament_id": "OFW29a9R", "instantiation": "false", "filament_cost": [ "25.4" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @base.json b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @base.json index 2b64adc51c..ea65b41ec4 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @base.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @base.json @@ -3,7 +3,7 @@ "name": "PolyTerra PLA Marble @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL69", + "filament_id": "OFxe4rXr", "instantiation": "false", "bed_type": [ "Cool Plate" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @base.json b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @base.json index 15fccef9e3..1d322a6c3e 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @base.json +++ b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @base.json @@ -3,7 +3,7 @@ "name": "PolyTerra PLA+ @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL70", + "filament_id": "OFEjbwqG", "instantiation": "false", "bed_type": [ "Cool Plate" diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @base.json b/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @base.json index 22b1a0d5ce..94ab2b2fd9 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @base.json @@ -3,7 +3,7 @@ "name": "Polymaker HT-PLA @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM017", + "filament_id": "OFPoyiFs", "instantiation": "false", "filament_cost": [ "26.99" diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @base.json b/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @base.json index 55173547e9..585a6dd554 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @base.json @@ -3,7 +3,7 @@ "name": "Polymaker HT-PLA-GF @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFPM018", + "filament_id": "OFlwmqrC", "instantiation": "false", "filament_cost": [ "32.99" diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json index 099f90ce9c..d2f34323a0 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json @@ -3,7 +3,7 @@ "name": "SUNLU PLA Marble @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFSNL06", + "filament_id": "OFxUwUeW", "instantiation": "false", "filament_cost": [ "31.99" diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json index 523468391e..6e3eaf356e 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json @@ -3,7 +3,7 @@ "name": "SUNLU PETG @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "GFSNL08", + "filament_id": "OF2GCW1l", "instantiation": "false", "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json index f99bbc84bf..f3b92cdb2f 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json @@ -3,7 +3,7 @@ "name": "SUNLU PLA Matte @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFSNL02", + "filament_id": "OFpW4gdi", "instantiation": "false", "filament_cost": [ "25.99" diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json index 47f103af84..d2b1087f28 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json @@ -3,7 +3,7 @@ "name": "SUNLU PLA+ 2.0 @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFSNL04", + "filament_id": "OFHmPYRy", "instantiation": "false", "filament_cost": [ "18.99" diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json index ffe454c74f..c46fb9affc 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json @@ -3,7 +3,7 @@ "name": "SUNLU PLA+ @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFSNL03", + "filament_id": "OFMUWNkp", "instantiation": "false", "filament_cost": [ "18.99" diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json index e83ae1a411..22e7994783 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json @@ -3,7 +3,7 @@ "name": "SUNLU Silk PLA+ @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFSNL05", + "filament_id": "OFpPGSKG", "instantiation": "false", "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_cost": [ diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json index 8cc3cd97a7..e13c06ceb8 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json @@ -3,7 +3,7 @@ "name": "SUNLU Wood PLA @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFSNL07", + "filament_id": "OFLJ8S6I", "instantiation": "false", "filament_cost": [ "26.99" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json b/resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json index 2889bc0a39..ecc4aa62f4 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json @@ -4,7 +4,7 @@ "inherits": "Generic ABS @base", "from": "system", "setting_id": "GF_ANRA_00", - "filament_id": "GF_ANRA", + "filament_id": "OFzk5oAo", "instantiation": "true", "activate_air_filtration": [ "1" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json b/resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json index 9da0cc2b6e..3d4fbe9c88 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json @@ -4,7 +4,7 @@ "inherits": "Generic PA @base", "from": "system", "setting_id": "GF_ANAF_00", - "filament_id": "GF_ANAF", + "filament_id": "OFSw6Mor", "instantiation": "true", "activate_air_filtration": [ "1" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json b/resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json index 037ae82eed..5486b65d44 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json @@ -4,7 +4,7 @@ "inherits": "Generic PA @base", "from": "system", "setting_id": "GF_ANAD_00", - "filament_id": "GF_ANAD", + "filament_id": "OFWK0Y9A", "instantiation": "true", "activate_air_filtration": [ "1" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json b/resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json index 3b8f50c799..1881e454f5 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json @@ -4,7 +4,7 @@ "inherits": "Generic PA-CF @base", "from": "system", "setting_id": "GF_ANAX_00", - "filament_id": "GF_ANAX", + "filament_id": "OFBsbMMF", "instantiation": "true", "activate_air_filtration": [ "1" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json b/resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json index dc5e815df5..e0696d14fe 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json @@ -4,7 +4,7 @@ "inherits": "Generic PA @base", "from": "system", "setting_id": "GF_ANLA_00", - "filament_id": "GF_ANLA", + "filament_id": "OF1ID4N1", "instantiation": "true", "activate_air_filtration": [ "1" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json b/resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json index e1e67fbb71..d64bb0629e 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json @@ -4,7 +4,7 @@ "inherits": "Generic PC @base", "from": "system", "setting_id": "GF_ANPBX_00", - "filament_id": "GF_ANPBX", + "filament_id": "OFhN09f0", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json index 288368dd07..6a4af4f908 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json @@ -4,7 +4,7 @@ "inherits": "Generic PETG @base", "from": "system", "setting_id": "GF_ANPE_00", - "filament_id": "GF_ANPE", + "filament_id": "OFHHwrd1", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json index 060ffe6b56..ff647879dc 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json @@ -4,7 +4,7 @@ "inherits": "Generic PETG @base", "from": "system", "setting_id": "GF_ANEG_00", - "filament_id": "GF_ANEG", + "filament_id": "OFUtiVRn", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json index c83d353302..fdbaa361f2 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json @@ -4,7 +4,7 @@ "inherits": "Generic PETG @base", "from": "system", "setting_id": "GF_ANGE_00", - "filament_id": "GF_ANGE", + "filament_id": "OFZGrQTU", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json index 96aec4f471..12849a851d 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json @@ -4,7 +4,7 @@ "inherits": "Generic PETG @base", "from": "system", "setting_id": "GF_ANPF_00", - "filament_id": "GF_ANPF", + "filament_id": "OF0EYBWQ", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json index a73d5ae48a..bdbecc7722 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json @@ -4,7 +4,7 @@ "inherits": "Generic PETG @base", "from": "system", "setting_id": "GF_ANPM_00", - "filament_id": "GF_ANPM", + "filament_id": "OFU5JPDy", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json index 1c4f092d54..a466f88b0a 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json @@ -4,7 +4,7 @@ "inherits": "Generic PETG @base", "from": "system", "setting_id": "GF_ANRM_00", - "filament_id": "GF_ANRM", + "filament_id": "OFqTwtXM", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json index 927ef1ca6e..a5c78fe215 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json @@ -4,7 +4,7 @@ "inherits": "Generic PETG-CF @base", "from": "system", "setting_id": "GF_ANRX_00", - "filament_id": "GF_ANRX", + "filament_id": "OFAcJkl1", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json index d008217fcf..f32705ba65 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json @@ -4,7 +4,7 @@ "inherits": "Generic PLA @base", "from": "system", "setting_id": "GF_ANEP_00", - "filament_id": "GF_ANEP", + "filament_id": "OF71b7qO", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json index 51b2924577..fa2c0e9ae0 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json @@ -4,7 +4,7 @@ "inherits": "Generic PLA @base", "from": "system", "setting_id": "GF_ANPL_00", - "filament_id": "GF_ANPL", + "filament_id": "OFZJft47", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json index 5ab0cc036a..1dc1796d4b 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json @@ -4,7 +4,7 @@ "inherits": "Generic PLA @base", "from": "system", "setting_id": "GF_ANHTP_00", - "filament_id": "GF_ANHTP", + "filament_id": "OFVDWuxl", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json index caa3fb10ed..f64767d1e3 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json @@ -4,7 +4,7 @@ "inherits": "Generic PLA Silk @base", "from": "system", "setting_id": "GF_ANPS_00", - "filament_id": "GF_ANPS", + "filament_id": "OFOQCfVa", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json index 97c7026910..1bbfb305b2 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json @@ -4,7 +4,7 @@ "inherits": "Generic PLA @base", "from": "system", "setting_id": "GF_ANTE_00", - "filament_id": "GF_ANTE", + "filament_id": "OFRFhdqy", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json index faa711ee14..99ec158160 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json @@ -4,7 +4,7 @@ "inherits": "Generic PLA @base", "from": "system", "setting_id": "GF_ANPLW_00", - "filament_id": "GF_ANPLW", + "filament_id": "OFN8QBhu", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json index 3ffec96061..ffe91af773 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json @@ -4,7 +4,7 @@ "inherits": "Generic PLA High Speed @base", "from": "system", "setting_id": "GF_ANXPH_00", - "filament_id": "GF_ANXPH", + "filament_id": "OFLjDYxH", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json index b8016af159..073b96a224 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json @@ -4,7 +4,7 @@ "inherits": "Generic PLA @base", "from": "system", "setting_id": "GF_ANXP_00", - "filament_id": "GF_ANXP", + "filament_id": "OFtdVZpV", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json index ad47884179..b6a2695235 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json @@ -4,7 +4,7 @@ "inherits": "Generic PLA @base", "from": "system", "setting_id": "GF_ANRPL_00", - "filament_id": "GF_ANRPL", + "filament_id": "OFnBvPhb", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json index 608be46906..7910e3c772 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json @@ -4,7 +4,7 @@ "inherits": "Generic PLA-CF @base", "from": "system", "setting_id": "GF_ANPCF_00", - "filament_id": "GF_ANPCF", + "filament_id": "OFcpa50Z", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json b/resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json index 8ca7e5e5ab..13604f5832 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json @@ -4,7 +4,7 @@ "inherits": "Generic PA @base", "from": "system", "setting_id": "GF_ANPV_00", - "filament_id": "GF_ANPV", + "filament_id": "OFQ5TxZ2", "instantiation": "true", "activate_air_filtration": [ "1" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json b/resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json index 05c7af8947..d8a9ca5ca3 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json @@ -4,7 +4,7 @@ "inherits": "Generic TPU @base", "from": "system", "setting_id": "GF_ANEF_00", - "filament_id": "GF_ANEF", + "filament_id": "OFO6GMJ3", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json b/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json index e6236ed79a..f4d1beac7d 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json @@ -4,7 +4,7 @@ "inherits": "Generic TPU @base", "from": "system", "setting_id": "GF_ANTA_00", - "filament_id": "GF_ANTA", + "filament_id": "OFvcIGee", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json b/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json index 6b971b7d5c..61d6100a71 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json @@ -4,7 +4,7 @@ "inherits": "Generic TPU @base", "from": "system", "setting_id": "GF_ANTM_00", - "filament_id": "GF_ANTM", + "filament_id": "OFyJjkek", "instantiation": "true", "activate_air_filtration": [ "0" diff --git a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @base.json b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @base.json index 544608b91a..6820e79489 100644 --- a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @base.json +++ b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @base.json @@ -3,7 +3,7 @@ "name": "eSUN PLA+ @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "GFL03", + "filament_id": "OFqINlYj", "instantiation": "false", "filament_cost": [ "22.99" diff --git a/scripts/filament_id_snapshot.json b/scripts/filament_id_snapshot.json index 9a4b4a2abd..cf4d13c987 100644 --- a/scripts/filament_id_snapshot.json +++ b/scripts/filament_id_snapshot.json @@ -135,7 +135,6 @@ "Artillery/Artillery PVA @Artillery M1 Pro 0.4 nozzle", "Artillery/Artillery TPU", "Artillery/Artillery TPU @Artillery M1 Pro 0.4 nozzle", - "BBL/Generic SBS", "BBL/addnorth ABS rABS", "BBL/addnorth PA Adura", "BBL/addnorth PA Adura FDA", @@ -877,637 +876,18 @@ "Z-Bolt/Generic ABS HT @Z-Bolt Base" ], "ids": { - "BABB00": [ - "BBL/BETA ABS" - ], - "BASB00": [ - "BBL/BETA ASA" - ], - "BFLSBS99": [ - "BBL/Generic SBS" - ], - "BHIB00": [ - "BBL/BETA HIPS" - ], - "BPAB00": [ - "BBL/BETA PAHT-CF" - ], - "BPBB00": [ - "BBL/BETA PEBA 90A" - ], - "BPGB00": [ - "BBL/BETA PETG" - ], - "BPGB01": [ - "BBL/BETA PETG Heat Color Change" - ], - "BPGB02": [ - "BBL/BETA PETG Fluorescence" - ], - "BPGB03": [ - "BBL/BETA PETG Glitter" - ], - "BPGB04": [ - "BBL/BETA PETG Glow" - ], - "BPGB05": [ - "BBL/BETA PETG Gradient" - ], - "BPGB06": [ - "BBL/BETA PETG HF" - ], - "BPGB07": [ - "BBL/BETA PETG Marble" - ], - "BPGB08": [ - "BBL/BETA PETG Matte" - ], - "BPGB09": [ - "BBL/BETA PETG Metallic" - ], - "BPGB10": [ - "BBL/BETA PETG Transparent" - ], - "BPGB11": [ - "BBL/BETA PETG UV Color Change" - ], - "BPGB12": [ - "BBL/BETA PETG-CF" - ], - "BPGB13": [ - "BBL/BETA PETG-GF" - ], - "BPLB00": [ - "BBL/BETA PLA Basic" - ], - "BPLB01": [ - "BBL/BETA PLA Silk+" - ], - "BPLB02": [ - "BBL/BETA PLA Chameleon" - ], - "BPLB03": [ - "BBL/BETA PLA Heat Color Change" - ], - "BPLB04": [ - "BBL/BETA PLA Fluorescence" - ], - "BPLB05": [ - "BBL/BETA PLA Glitter" - ], - "BPLB06": [ - "BBL/BETA PLA Glow" - ], - "BPLB07": [ - "BBL/BETA PLA Gradient" - ], - "BPLB08": [ - "BBL/BETA PLA Marble" - ], - "BPLB09": [ - "BBL/BETA PLA Matte" - ], - "BPLB10": [ - "BBL/BETA PLA Metal" - ], - "BPLB11": [ - "BBL/BETA PLA Metallic" - ], - "BPLB12": [ - "BBL/BETA PLA PRO" - ], - "BPLB13": [ - "BBL/BETA PLA Silk" - ], - "BPLB14": [ - "BBL/BETA PLA Transparent" - ], - "BPLB15": [ - "BBL/BETA PLA UV Color Change" - ], - "BPLB16": [ - "BBL/BETA PLA Youth" - ], - "BPLB17": [ - "BBL/BETA PLA-CF" - ], - "BPLB18": [ - "BBL/BETA PLA High Temp" - ], - "BPLB19": [ - "BBL/BETA PLA Wood" - ], - "BPLB20": [ - "BBL/BETA PLA High Speed" - ], - "BTUB00": [ - "BBL/BETA TPU 90A" - ], - "BTUB01": [ - "BBL/BETA TPU Matte" - ], - "BTUB02": [ - "BBL/BETA TPU 95A" - ], - "BTUB03": [ - "BBL/BETA TPU 98A" - ], - "GFA00": [ - "BBL/Bambu PLA Basic" - ], - "GFA01": [ - "BBL/Bambu PLA Matte" - ], - "GFA02": [ - "BBL/Bambu PLA Metal" - ], - "GFA05": [ - "BBL/Bambu PLA Silk" - ], - "GFA06": [ - "BBL/Bambu PLA Silk+" - ], - "GFA07": [ - "BBL/Bambu PLA Marble" - ], - "GFA08": [ - "BBL/Bambu PLA Sparkle" - ], - "GFA09": [ - "BBL/Bambu PLA Tough" - ], - "GFA10": [ - "BBL/Bambu PLA Tough+" - ], - "GFA11": [ - "BBL/Bambu PLA Aero" - ], - "GFA12": [ - "BBL/Bambu PLA Glow" - ], - "GFA13": [ - "BBL/Bambu PLA Dynamic" - ], - "GFA15": [ - "BBL/Bambu PLA Galaxy" - ], - "GFA16": [ - "BBL/Bambu PLA Wood" - ], - "GFA17": [ - "BBL/Bambu PLA Translucent" - ], - "GFA18": [ - "BBL/Bambu PLA Lite" - ], - "GFA19": [ - "BBL/Bambu PLA Pure" - ], - "GFA50": [ - "BBL/Bambu PLA-CF" - ], - "GFB00": [ - "BBL/Bambu ABS" - ], - "GFB01": [ - "BBL/Bambu ASA" - ], - "GFB02": [ - "BBL/Bambu ASA-Aero" - ], - "GFB50": [ - "BBL/Bambu ABS-GF" - ], - "GFB51": [ - "BBL/Bambu ASA-CF" - ], - "GFB60": [ - "BBL/PolyLite ABS" - ], - "GFB61": [ - "BBL/PolyLite ASA" - ], - "GFB98": [ - "BBL/Generic ASA" - ], - "GFB99": [ - "BBL/Generic ABS" - ], - "GFC00": [ - "BBL/Bambu PC" - ], - "GFC01": [ - "BBL/Bambu PC FR" - ], - "GFC99": [ - "BBL/Generic PC" - ], - "GFG00": [ - "BBL/Bambu PETG Basic" - ], - "GFG01": [ - "BBL/Bambu PETG Translucent" - ], - "GFG02": [ - "BBL/Bambu PETG HF" - ], - "GFG50": [ - "BBL/Bambu PETG-CF" - ], - "GFG60": [ - "BBL/PolyLite PETG" - ], - "GFG96": [ - "BBL/Generic PETG HF" - ], - "GFG97": [ - "BBL/Generic PCTG" - ], - "GFG98": [ - "BBL/Generic PETG-CF" - ], - "GFG99": [ - "BBL/Generic PETG" - ], - "GFL00": [ - "BBL/PolyLite PLA" - ], - "GFL01": [ - "BBL/PolyTerra PLA" - ], - "GFL03": [ - "BBL/eSUN PLA+" - ], - "GFL04": [ - "BBL/Overture PLA" - ], - "GFL05": [ - "BBL/Overture Matte PLA" - ], - "GFL06": [ - "BBL/Fiberon PETG-ESD" - ], - "GFL50": [ - "BBL/Fiberon PA6-CF" - ], - "GFL51": [ - "BBL/Fiberon PA6-GF" - ], - "GFL52": [ - "BBL/Fiberon PA12-CF" - ], - "GFL53": [ - "BBL/Fiberon PA612-CF" - ], - "GFL54": [ - "BBL/Fiberon PET-CF" - ], - "GFL55": [ - "BBL/Fiberon PETG-rCF" - ], - "GFL56": [ - "BBL/Fiberon PA12-CF10" - ], - "GFL57": [ - "BBL/Fiberon PA6-CF20" - ], - "GFL58": [ - "BBL/Fiberon PA6-GF25" - ], - "GFL59": [ - "BBL/Fiberon PA612-CF15" - ], - "GFL60": [ - "BBL/Fiberon PET-CF17" - ], - "GFL61": [ - "BBL/Fiberon PETG-rCF08" - ], - "GFL62": [ - "BBL/PolyLite CosPLA" - ], - "GFL63": [ - "BBL/PolyLite PLA Galaxy" - ], - "GFL64": [ - "BBL/PolyLite PLA Glow" - ], - "GFL65": [ - "BBL/PolyLite PLA Luminous" - ], - "GFL66": [ - "BBL/PolyLite PLA Neon" - ], - "GFL67": [ - "BBL/PolyLite PLA Starlight" - ], - "GFL68": [ - "BBL/PolyLite PLA Translucent" - ], - "GFL69": [ - "BBL/PolyTerra PLA Marble" - ], - "GFL70": [ - "BBL/PolyTerra PLA+" - ], - "GFL95": [ - "BBL/Generic PLA High Speed" - ], - "GFL96": [ - "BBL/Generic PLA Silk" - ], - "GFL98": [ - "BBL/Generic PLA-CF" - ], - "GFL99": [ - "BBL/Generic PLA" - ], - "GFLSBS99": [], - "GFN03": [ - "BBL/Bambu PA-CF" - ], - "GFN04": [ - "BBL/Bambu PAHT-CF" - ], - "GFN05": [ - "BBL/Bambu PA6-CF" - ], - "GFN06": [ - "BBL/Bambu PPA-CF" - ], - "GFN08": [ - "BBL/Bambu PA6-GF" - ], - "GFN96": [ - "BBL/Generic PPA-GF" - ], - "GFN97": [ - "BBL/Generic PPA-CF" - ], - "GFN98": [ - "BBL/Generic PA-CF" - ], - "GFN99": [ - "BBL/Generic PA" - ], - "GFNMK00": [ - "BBL/Numakers PLA+" - ], - "GFOT001": [ - "BBL/Overture PLA Pro" - ], - "GFP95": [ - "BBL/Generic PP-GF" - ], - "GFP96": [ - "BBL/Generic PP-CF" - ], - "GFP97": [ - "BBL/Generic PP" - ], - "GFP98": [ - "BBL/Generic PE-CF" - ], - "GFP99": [ - "BBL/Generic PE" - ], - "GFPM001": [ - "BBL/Panchroma PLA" - ], - "GFPM002": [ - "BBL/Panchroma PLA Matte" - ], - "GFPM003": [ - "BBL/Panchroma PLA Marble" - ], - "GFPM004": [ - "BBL/Panchroma PLA Silk" - ], - "GFPM005": [ - "BBL/Panchroma PLA Satin" - ], - "GFPM006": [ - "BBL/Panchroma PLA Translucent" - ], - "GFPM007": [ - "BBL/Panchroma PLA Galaxy" - ], - "GFPM008": [ - "BBL/Panchroma PLA Celestial" - ], - "GFPM009": [ - "BBL/Panchroma PLA Starlight" - ], - "GFPM010": [ - "BBL/Panchroma PLA Glow" - ], - "GFPM011": [ - "BBL/Panchroma PLA Luminous" - ], - "GFPM012": [ - "BBL/Panchroma PLA Metallic" - ], - "GFPM013": [ - "BBL/Panchroma PLA Neon" - ], - "GFPM014": [ - "BBL/Panchroma PLA UV Shift" - ], - "GFPM015": [ - "BBL/Panchroma PLA Temp Shift" - ], - "GFPM016": [ - "BBL/Panchroma CoPE" - ], - "GFPM017": [ - "BBL/Polymaker HT-PLA" - ], - "GFPM018": [ - "BBL/Polymaker HT-PLA-GF" - ], - "GFPM019": [ - "BBL/PolyLite PLA Pro" - ], - "GFR00": [ - "BBL/FusRock ABS-GF" - ], - "GFR98": [ - "BBL/Generic PHA" - ], - "GFR99": [ - "BBL/Generic EVA" - ], - "GFS00": [ - "BBL/Bambu Support W" - ], - "GFS01": [ - "BBL/Bambu Support G" - ], - "GFS02": [ - "BBL/Bambu Support For PLA" - ], - "GFS03": [ - "BBL/Bambu Support For PA/PET" - ], - "GFS04": [ - "BBL/Bambu PVA" - ], - "GFS05": [ - "BBL/Bambu Support For PLA/PETG" - ], - "GFS06": [ - "BBL/Bambu Support for ABS" - ], - "GFS97": [ - "BBL/Generic BVOH" - ], - "GFS98": [ - "BBL/Generic HIPS" - ], - "GFS99": [ - "BBL/Generic PVA" - ], - "GFSNL02": [ - "BBL/SUNLU PLA Matte" - ], - "GFSNL03": [ - "BBL/SUNLU PLA+" - ], - "GFSNL04": [ - "BBL/SUNLU PLA+ 2.0" - ], - "GFSNL05": [ - "BBL/SUNLU Silk PLA+" - ], - "GFSNL06": [ - "BBL/SUNLU PLA Marble" - ], - "GFSNL07": [ - "BBL/SUNLU Wood PLA" - ], - "GFSNL08": [ - "BBL/SUNLU PETG" - ], - "GFT01": [ - "BBL/Bambu PET-CF" - ], - "GFT02": [ - "BBL/Bambu PPS-CF" - ], - "GFT97": [ - "BBL/Generic PPS" - ], - "GFT98": [ - "BBL/Generic PPS-CF" - ], - "GFU00": [ - "BBL/Bambu TPU 95A HF" - ], - "GFU01": [ - "BBL/Bambu TPU 95A" - ], - "GFU02": [ - "BBL/Bambu TPU for AMS" - ], - "GFU03": [ - "BBL/Bambu TPU 90A" - ], - "GFU04": [ - "BBL/Bambu TPU 85A" - ], - "GFU98": [ - "BBL/Generic TPU for AMS" - ], - "GFU99": [ - "BBL/Generic TPU" - ], - "GF_ANAD": [ - "BBL/addnorth PA Adura" - ], - "GF_ANAF": [ - "BBL/addnorth PA Adura FDA" - ], - "GF_ANAX": [ - "BBL/addnorth PA-CF Adura X" - ], - "GF_ANEF": [ - "BBL/addnorth TPU EasyFlex" - ], - "GF_ANEG": [ - "BBL/addnorth PETG ESD" - ], - "GF_ANEP": [ - "BBL/addnorth PLA E-PLA" - ], - "GF_ANGE": [ - "BBL/addnorth PETG Economy" - ], - "GF_ANHTP": [ - "BBL/addnorth PLA HT-PLA PRO Matte" - ], - "GF_ANLA": [ - "BBL/addnorth PA6 Addlantis" - ], - "GF_ANPBX": [ - "BBL/addnorth PC BLend HT LCF" - ], - "GF_ANPCF": [ - "BBL/addnorth PLA-CF Carbon Fiber" - ], - "GF_ANPE": [ - "BBL/addnorth PETG Base" - ], - "GF_ANPF": [ - "BBL/addnorth PETG Flame v0" - ], - "GF_ANPL": [ - "BBL/addnorth PLA Economy" - ], - "GF_ANPLW": [ - "BBL/addnorth PLA Wood" - ], - "GF_ANPM": [ - "BBL/addnorth PETG PRO Matte" - ], - "GF_ANPS": [ - "BBL/addnorth PLA Premium Silk" - ], - "GF_ANPV": [ - "BBL/addnorth PVDF Adamant S1" - ], - "GF_ANRA": [ - "BBL/addnorth ABS rABS" - ], - "GF_ANRM": [ - "BBL/addnorth PETG rPETG Matte" - ], - "GF_ANRPL": [ - "BBL/addnorth PLA rPLA RE-ADD" - ], - "GF_ANRX": [ - "BBL/addnorth PETG-CF Rigid X" - ], - "GF_ANTA": [ - "BBL/addnorth TPU Pro Matte 85A" - ], - "GF_ANTE": [ - "BBL/addnorth PLA Textura" - ], - "GF_ANTM": [ - "BBL/addnorth TPU Pro Matte 95A" - ], - "GF_ANXP": [ - "BBL/addnorth PLA X-PLA" - ], - "GF_ANXPH": [ - "BBL/addnorth PLA X-PLA High Speed" - ], "OF02UAVh": [ "Creality/Soleyin Ultra PLA" ], + "OF03RK6r": [ + "BBL/BETA PLA Metal" + ], "OF0AquDh": [ "Flashforge/FusRock S-Multi" ], + "OF0EYBWQ": [ + "BBL/addnorth PETG Flame v0" + ], "OF0FfcAG": [ "Anycubic/Anycubic TPU for ACE" ], @@ -1519,6 +899,7 @@ "Artillery/Artillery PLA Tough" ], "OF0UJcb6": [ + "BBL/PolyLite PETG", "OrcaFilamentLibrary/PolyLite PETG", "Snapmaker/PolyLite PETG" ], @@ -1535,6 +916,7 @@ "InfiMech/InfiMech ABS" ], "OF0gGRWk": [ + "BBL/Panchroma PLA Glow", "OrcaFilamentLibrary/Panchroma PLA Glow", "Snapmaker/Panchroma PLA Glow" ], @@ -1543,6 +925,7 @@ "OrcaFilamentLibrary/Elegoo PAHT-CF" ], "OF0kCNDK": [ + "BBL/Panchroma PLA Luminous", "OrcaFilamentLibrary/Panchroma PLA Luminous", "Snapmaker/Panchroma PLA Luminous" ], @@ -1557,6 +940,7 @@ "Qidi/QIDI ABS Rapido 0.8 nozzle" ], "OF0wBGNx": [ + "BBL/Bambu ASA-CF", "OrcaFilamentLibrary/Bambu ASA-CF" ], "OF0wz84w": [ @@ -1568,7 +952,11 @@ "OF112FvY": [ "Anycubic/Generic PETG Basic" ], + "OF1ID4N1": [ + "BBL/addnorth PA6 Addlantis" + ], "OF1N1qMK": [ + "BBL/Panchroma PLA UV Shift", "OrcaFilamentLibrary/Panchroma PLA UV Shift", "Snapmaker/Panchroma PLA UV Shift" ], @@ -1577,6 +965,7 @@ "OrcaFilamentLibrary/Overture Easy PLA" ], "OF1UNk9P": [ + "BBL/Generic PP", "Creality/Generic PP", "OrcaFilamentLibrary/Generic PP", "Tiertime/Generic PP" @@ -1604,6 +993,7 @@ "OrcaFilamentLibrary/FilAr PLA-mate Violeta" ], "OF2GCW1l": [ + "BBL/SUNLU PETG", "Flashforge/SUNLU PETG", "OrcaFilamentLibrary/SUNLU PETG", "Sovol/SUNLU PETG" @@ -1612,6 +1002,7 @@ "Qidi/QIDI PLA Silk" ], "OF2VFe4J": [ + "BBL/Bambu PAHT-CF", "OrcaFilamentLibrary/Bambu PAHT-CF" ], "OF2Z1nT5": [ @@ -1629,6 +1020,9 @@ "Elegoo/Elegoo Rapid TPU 95A", "OrcaFilamentLibrary/Elegoo Rapid TPU 95A" ], + "OF342jVN": [ + "BBL/Bambu PLA Tough+" + ], "OF3F63OE": [ "re3D/re3D PETG" ], @@ -1638,6 +1032,9 @@ "OF3OMgrI": [ "Creality/CR-Silk" ], + "OF3PDEw3": [ + "BBL/BETA PLA High Speed" + ], "OF3WQaKK": [ "Creality/CR-PETG" ], @@ -1676,13 +1073,24 @@ "OF4Nhggz": [ "Artillery/Artillery PLA Basic+" ], - "OF4RvVuU": [], + "OF4PKvem": [ + "BBL/BETA PLA Fluorescence" + ], + "OF4QZANi": [ + "BBL/BETA TPU Matte" + ], + "OF4RvVuU": [ + "BBL/Bambu PPS-CF" + ], "OF4S3To3": [ "Qidi/QIDI PETG Rapido" ], "OF4WB37S": [ "Snapmaker/Snapmaker PETG" ], + "OF4XTfoI": [ + "BBL/BETA PETG Marble" + ], "OF4f8vVp": [ "WonderMaker/WonderMaker PET-CF" ], @@ -1701,6 +1109,7 @@ "Elegoo/Generic ASA-CF" ], "OF54B0S0": [ + "BBL/Bambu PPA-CF", "OrcaFilamentLibrary/Bambu PPA-CF" ], "OF54SvEe": [ @@ -1709,15 +1118,25 @@ "OF55jHAJ": [ "Prusa/Generic ABS HF" ], + "OF5B9sUc": [ + "BBL/Fiberon PA6-GF25" + ], "OF5BN24W": [ "Flashforge/Flashforge PPA-GF" ], + "OF5BXhHF": [ + "BBL/BETA PLA High Temp" + ], "OF5CgdDq": [ + "BBL/PolyLite PLA", "OrcaArena/PolyLite PLA", "OrcaFilamentLibrary/PolyLite PLA", "Qidi/PolyLite PLA", "Snapmaker/PolyLite PLA" ], + "OF5LAnla": [ + "BBL/BETA PLA Gradient" + ], "OF5NqBfC": [ "Wanhao France/YUMI PETG" ], @@ -1754,6 +1173,7 @@ "Ratrig/Generic TPU BigNozzle" ], "OF5umxxT": [ + "BBL/PolyLite PLA Glow", "Snapmaker/PolyLite PLA Glow" ], "OF5vgi2G": [ @@ -1785,23 +1205,34 @@ "Snapmaker/Snapmaker Breakaway Support For PLA", "Snapmaker/Snapmaker J1 PVA" ], + "OF6Yn69v": [ + "BBL/BETA TPU 90A" + ], "OF6kj4jI": [ "iQ/Fiberthree PACF Pro P2" ], "OF6qAuyi": [ "Flashforge/Flashforge PLA Matte" ], + "OF6qw3Wb": [ + "BBL/BETA PAHT-CF" + ], "OF6rdQ6M": [ + "BBL/Generic PPS-CF", "Creality/Generic PPS-CF", "Tiertime/Generic PPS-CF" ], "OF70zbGS": [ "Creality/Hyper L-W PLA" ], + "OF71b7qO": [ + "BBL/addnorth PLA E-PLA" + ], "OF72YYTd": [ "Snapmaker/Snapmaker ABS" ], "OF74KeQR": [ + "BBL/Generic PHA", "OrcaFilamentLibrary/Generic PHA", "Tiertime/Generic PHA" ], @@ -1821,6 +1252,7 @@ "Anycubic/Anycubic PLA Translucent" ], "OF7lOgYF": [ + "BBL/Generic PETG HF", "OrcaFilamentLibrary/Generic PETG HF", "Prusa/Generic PETG HF" ], @@ -1851,7 +1283,11 @@ "OF8O09RG": [ "Flashforge/Flashforge HS PLA Burnt Ti" ], + "OF8QdQwS": [ + "BBL/BETA PLA Silk+" + ], "OF8Tlg47": [ + "BBL/Generic PPA-GF", "OrcaFilamentLibrary/Generic PPA-GF", "Tiertime/Generic PPA-GF" ], @@ -1871,6 +1307,7 @@ "Eryone/Eryone PETG" ], "OF8tPByX": [ + "BBL/Generic PPA-CF", "OrcaFilamentLibrary/Generic PPA-CF", "Tiertime/Generic PPA-CF" ], @@ -1889,6 +1326,7 @@ "Afinia/Afinia PLA" ], "OF9OlTWH": [ + "BBL/Bambu PLA Marble", "OrcaFilamentLibrary/Bambu PLA Marble" ], "OF9PELEb": [ @@ -1924,10 +1362,17 @@ "OFAZllAN": [ "Artillery/Artillery PLA-CF" ], + "OFAc0Pr3": [ + "BBL/Fiberon PET-CF17" + ], + "OFAcJkl1": [ + "BBL/addnorth PETG-CF Rigid X" + ], "OFAebKg8": [ "Flashforge/Flashforge PLA Metal" ], "OFAnyRUI": [ + "BBL/Bambu Support For PLA", "OrcaFilamentLibrary/Bambu Support For PLA" ], "OFAt6ec0": [ @@ -1946,6 +1391,7 @@ "Creality/Soleyin Basic PETG" ], "OFBSW57R": [ + "BBL/Bambu PLA Aero", "OrcaFilamentLibrary/Bambu PLA Aero" ], "OFBUIlZ7": [ @@ -1956,9 +1402,14 @@ "Snapmaker/Snapmaker Dual PETG" ], "OFBoSWxb": [ + "BBL/PolyLite PLA Luminous", "Snapmaker/PolyLite PLA Luminous" ], + "OFBsbMMF": [ + "BBL/addnorth PA-CF Adura X" + ], "OFBw6eEG": [ + "BBL/Overture Matte PLA", "OrcaFilamentLibrary/Overture Matte PLA" ], "OFC1PzXz": [ @@ -1968,14 +1419,17 @@ "RH3D/Generic PCCF" ], "OFC78WGQ": [ + "BBL/Panchroma PLA Starlight", "OrcaFilamentLibrary/Panchroma PLA Starlight", "Snapmaker/Panchroma PLA Starlight" ], "OFCD8qiU": [ + "BBL/Generic EVA", "OrcaFilamentLibrary/Generic EVA", "Tiertime/Generic EVA" ], "OFCIUsWh": [ + "BBL/Panchroma PLA Translucent", "OrcaFilamentLibrary/Panchroma PLA Translucent", "Snapmaker/Panchroma PLA Translucent" ], @@ -2024,6 +1478,7 @@ "OrcaFilamentLibrary/eSUN PLA-Matte" ], "OFDGigEI": [ + "BBL/Bambu PLA Dynamic", "OrcaFilamentLibrary/Bambu PLA Dynamic" ], "OFDIrhbu": [ @@ -2046,6 +1501,7 @@ "Anker/Generic PLA", "Anycubic/Generic PLA", "Artillery/Generic PLA", + "BBL/Generic PLA", "Blocks/Generic PLA", "CONSTRUCT3D/Generic PLA", "Chuanying/Generic PLA", @@ -2099,6 +1555,7 @@ "OFDvXujf": [ "Anker/Generic PVA", "Anycubic/Generic PVA", + "BBL/Generic PVA", "Blocks/Generic PVA", "Chuanying/Generic PVA", "Creality/Generic PVA", @@ -2121,6 +1578,7 @@ "Prusa/Generic PVA HF" ], "OFDxfPgH": [ + "BBL/Bambu PLA Sparkle", "OrcaFilamentLibrary/Bambu PLA Sparkle" ], "OFDxxTpW": [ @@ -2131,6 +1589,7 @@ "OrcaFilamentLibrary/COEX TPU 60A" ], "OFEGNJD4": [ + "BBL/Bambu PLA Silk", "OrcaFilamentLibrary/Bambu PLA Silk" ], "OFEOnBj6": [ @@ -2148,6 +1607,7 @@ ], "OFEabreg": [ "Anycubic/Fiberon PA6-CF20", + "BBL/Fiberon PA6-CF20", "Snapmaker/Fiberon PA6-CF20" ], "OFEbIx49": [ @@ -2158,9 +1618,11 @@ "Cubicon/Cubicon PC" ], "OFEjbwqG": [ + "BBL/PolyTerra PLA+", "Snapmaker/PolyTerra PLA+" ], "OFEkPBwx": [ + "BBL/Bambu PLA Glow", "OrcaFilamentLibrary/Bambu PLA Glow" ], "OFEmsric": [ @@ -2170,6 +1632,7 @@ "Peopoly/Peopoly Lancer PLA-C" ], "OFEswT5W": [ + "BBL/Bambu PLA-CF", "OrcaFilamentLibrary/Bambu PLA-CF" ], "OFEvEfw5": [ @@ -2181,7 +1644,11 @@ "OFF3cuzT": [ "Creality/Generic TPU 64D" ], + "OFF5o7b2": [ + "BBL/BETA PLA Youth" + ], "OFF9OKoY": [ + "BBL/PolyLite PLA Pro", "OrcaFilamentLibrary/PolyLite PLA Pro", "Snapmaker/PolyLite PLA Pro" ], @@ -2195,6 +1662,7 @@ "Flashforge/Flashforge ASA Basic" ], "OFFNYwWR": [ + "BBL/Bambu PA-CF", "OrcaFilamentLibrary/Bambu PA-CF" ], "OFFP4ORR": [ @@ -2209,11 +1677,19 @@ "OFFbQscs": [ "Creality/eSUN PETG-Basic" ], + "OFFbSnCD": [ + "BBL/Bambu PLA Translucent" + ], + "OFFfJ09N": [ + "BBL/BETA PETG Glow" + ], "OFFkCLBl": [ + "BBL/Panchroma PLA Galaxy", "OrcaFilamentLibrary/Panchroma PLA Galaxy", "Snapmaker/Panchroma PLA Galaxy" ], "OFFvzqcd": [ + "BBL/Bambu PETG Basic", "OrcaFilamentLibrary/Bambu PETG Basic" ], "OFFwJWea": [ @@ -2235,6 +1711,12 @@ "OFGVwfK0": [ "OrcaFilamentLibrary/FilAr PLA-mate Gris" ], + "OFGVxj2A": [ + "BBL/BETA PLA Wood" + ], + "OFGc9l16": [ + "BBL/BETA PLA Glow" + ], "OFGcLA5R": [ "OrcaFilamentLibrary/FilAr PLA-mate Beige" ], @@ -2272,10 +1754,15 @@ "OFHAccHz": [ "OrcaFilamentLibrary/FilAr PLA Blanco Antartida" ], + "OFHHwrd1": [ + "BBL/addnorth PETG Base" + ], "OFHWSM21": [ + "BBL/Fiberon PET-CF", "OrcaFilamentLibrary/Fiberon PET-CF" ], "OFHa48An": [ + "BBL/Bambu PET-CF", "OrcaFilamentLibrary/Bambu PET-CF" ], "OFHaYaB1": [ @@ -2292,15 +1779,22 @@ "Snapmaker/Polymaker PLA Pro Metallic" ], "OFHmPYRy": [ + "BBL/SUNLU PLA+ 2.0", "Flashforge/SUNLU PLA+ 2.0", "OrcaFilamentLibrary/SUNLU PLA+ 2.0" ], + "OFI2MKy7": [ + "BBL/BETA PEBA 90A" + ], "OFI6WZpn": [ "OrcaArena/Arena Support W" ], "OFIBXa0k": [ "OrcaFilamentLibrary/FilAr PLA-mate Rojo" ], + "OFIBbYO5": [ + "BBL/Bambu TPU for AMS" + ], "OFIE3vOf": [ "Anycubic/Anycubic PLA Matte" ], @@ -2332,12 +1826,14 @@ "OrcaFilamentLibrary/Eolas Prints TPU Flex D53" ], "OFIfnzxC": [ + "BBL/Bambu Support For PLA/PETG", "OrcaFilamentLibrary/Bambu Support For PLA/PETG" ], "OFIgbDHq": [ "Anycubic/Anycubic PLA Luminous" ], "OFIxOuOu": [ + "BBL/PolyLite PLA Starlight", "Snapmaker/PolyLite PLA Starlight" ], "OFJ3F2jm": [ @@ -2368,11 +1864,15 @@ "Flashforge/Generic TPU-90A" ], "OFJgijky": [ + "BBL/PolyLite CosPLA", "Snapmaker/PolyLite CosPLA" ], "OFJhT2fd": [ "Snapmaker/Snapmaker Dual ABS" ], + "OFJnEaCp": [ + "BBL/BETA PLA Transparent" + ], "OFJrvXth": [ "Snapmaker/Snapmaker ABS Benchy" ], @@ -2385,6 +1885,9 @@ "OFJxSqO4": [ "Wanhao France/YUMI PLA Direct Drive" ], + "OFK7830e": [ + "BBL/BETA TPU 95A" + ], "OFK8XHPn": [ "Qidi/Overture ABS" ], @@ -2409,6 +1912,9 @@ "OFKWWgyp": [ "OrcaFilamentLibrary/FilAr PLA Carpincho" ], + "OFKYBAWe": [ + "BBL/BETA PLA Marble" + ], "OFKZ9skj": [ "OrcaFilamentLibrary/FilAr PLA Naranja Tigre" ], @@ -2422,12 +1928,17 @@ "Qidi/QIDI PAHT-CF" ], "OFKhMPeX": [ + "BBL/Bambu PC", "OrcaFilamentLibrary/Bambu PC" ], "OFKiSMWR": [ + "BBL/Panchroma PLA Marble", "OrcaFilamentLibrary/Panchroma PLA Marble", "Snapmaker/Panchroma PLA Marble" ], + "OFKyNkQz": [ + "BBL/BETA PETG UV Color Change" + ], "OFL9aRjN": [ "Snapmaker/Snapmaker PETG HF" ], @@ -2438,6 +1949,7 @@ "Flashforge/Flashforge PPA-CF" ], "OFLJ8S6I": [ + "BBL/SUNLU Wood PLA", "Flashforge/SUNLU Wood PLA", "OrcaFilamentLibrary/SUNLU Wood PLA" ], @@ -2449,6 +1961,7 @@ "Anker/Generic ASA", "Anycubic/Generic ASA", "Artillery/Generic ASA", + "BBL/Generic ASA", "Blocks/Generic ASA", "Chuanying/Generic ASA", "Creality/Generic ASA", @@ -2479,6 +1992,7 @@ "OFLakOUI": [ "Anker/Generic PC", "Anycubic/Generic PC", + "BBL/Generic PC", "Blocks/Generic PC", "Creality/Generic PC", "Custom/Generic PC", @@ -2512,6 +2026,12 @@ "OFLgwqp2": [ "Creality/Hyper PETG-GF" ], + "OFLjDYxH": [ + "BBL/addnorth PLA X-PLA High Speed" + ], + "OFLqgSuX": [ + "BBL/BETA PLA-CF" + ], "OFLzx3J4": [ "Creality/Hyper Marble" ], @@ -2538,9 +2058,11 @@ "Artillery/Artillery PA" ], "OFMTK0UC": [ + "BBL/Bambu Support For PA/PET", "OrcaFilamentLibrary/Bambu Support For PA/PET" ], "OFMUWNkp": [ + "BBL/SUNLU PLA+", "Flashforge/SUNLU PLA+", "OrcaFilamentLibrary/SUNLU PLA+" ], @@ -2549,6 +2071,7 @@ "OrcaFilamentLibrary/Overture Rock PLA" ], "OFMjtqTC": [ + "BBL/Bambu PLA Wood", "OrcaFilamentLibrary/Bambu PLA Wood" ], "OFMkAW6r": [ @@ -2563,6 +2086,12 @@ "OFMuXBmO": [ "OrcaFilamentLibrary/Elas PLA Basic" ], + "OFMzRg65": [ + "BBL/BETA PLA PRO" + ], + "OFN8QBhu": [ + "BBL/addnorth PLA Wood" + ], "OFN9fefN": [ "Cubicon/Cubicon ABS-A100" ], @@ -2587,7 +2116,11 @@ "OFNjku08": [ "CONSTRUCT3D/Generic High Flow PETG" ], + "OFNk8AvA": [ + "BBL/BETA PETG Gradient" + ], "OFNk8bxk": [ + "BBL/Bambu PA6-GF", "OrcaFilamentLibrary/Bambu PA6-GF" ], "OFNstOna": [ @@ -2597,6 +2130,7 @@ "Creality/Hyper PPA-CF" ], "OFO1GEq6": [ + "BBL/Panchroma PLA Neon", "OrcaFilamentLibrary/Panchroma PLA Neon", "Snapmaker/Panchroma PLA Neon" ], @@ -2604,6 +2138,9 @@ "Chuanying/Generic PETG-CF10", "Flashforge/Generic PETG-CF10" ], + "OFO6GMJ3": [ + "BBL/addnorth TPU EasyFlex" + ], "OFOABq7t": [ "BBL/AliZ PETG-Metal", "OrcaFilamentLibrary/AliZ PETG-Metal" @@ -2620,6 +2157,9 @@ "OFOPU1xv": [ "Snapmaker/Snapmaker PLA Full Spectrum" ], + "OFOQCfVa": [ + "BBL/addnorth PLA Premium Silk" + ], "OFObG16Q": [ "InfiMech/InfiMech PLA Basic" ], @@ -2640,6 +2180,7 @@ "Qidi/QIDI ABS Rapido 0.2 nozzle" ], "OFOvv91M": [ + "BBL/PolyLite ABS", "OrcaFilamentLibrary/PolyLite ABS", "Qidi/PolyLite ABS" ], @@ -2668,15 +2209,18 @@ "OrcaFilamentLibrary/Eolas Prints PLA INGEO 870" ], "OFPkCJKE": [ + "BBL/Panchroma PLA Satin", "Creality/Panchroma PLA Satin", "OrcaFilamentLibrary/Panchroma PLA Satin", "Snapmaker/Panchroma PLA Satin" ], "OFPklMI1": [ + "BBL/Generic PE", "OrcaFilamentLibrary/Generic PE", "Tiertime/Generic PE" ], "OFPoyiFs": [ + "BBL/Polymaker HT-PLA", "OrcaFilamentLibrary/Polymaker HT-PLA", "Snapmaker/Polymaker HT-PLA" ], @@ -2690,11 +2234,15 @@ "Eryone/Eryone ABS-CF" ], "OFQ3e56w": [ + "BBL/Bambu PLA Galaxy", "OrcaFilamentLibrary/Bambu PLA Galaxy" ], "OFQ40XeN": [ "Qidi/QIDI PETG Tough" ], + "OFQ5TxZ2": [ + "BBL/addnorth PVDF Adamant S1" + ], "OFQEGL7z": [ "FlyingBear/FlyingBear PA-CF" ], @@ -2702,11 +2250,13 @@ "OrcaArena/Arena TPU 95A" ], "OFQHiNJs": [ + "BBL/Bambu Support G", "OrcaFilamentLibrary/Bambu Support G" ], "OFQLcbps": [ "Anker/Generic PA-CF", "Anycubic/Generic PA-CF", + "BBL/Generic PA-CF", "Blocks/Generic PA-CF", "Creality/Generic PA-CF", "Custom/Generic PA-CF", @@ -2753,6 +2303,9 @@ "OFR1XLMN": [ "Qidi/QIDI TPU 95A-HF" ], + "OFRFhdqy": [ + "BBL/addnorth PLA Textura" + ], "OFRJ325z": [ "LH/LHS PETG" ], @@ -2766,6 +2319,7 @@ "OrcaFilamentLibrary/Eolas Prints PETG Transition" ], "OFRiYgMK": [ + "BBL/Panchroma PLA Celestial", "OrcaFilamentLibrary/Panchroma PLA Celestial", "Snapmaker/Panchroma PLA Celestial" ], @@ -2788,12 +2342,14 @@ "OrcaFilamentLibrary/eSUN ePLA-LW" ], "OFS2tn6G": [ + "BBL/Fiberon PA612-CF", "OrcaFilamentLibrary/Fiberon PA612-CF" ], "OFS4jbj3": [ "Eryone/Eryone PA" ], "OFS8lTQt": [ + "BBL/Panchroma PLA Silk", "OrcaFilamentLibrary/Panchroma PLA Silk", "Snapmaker/Panchroma PLA Silk" ], @@ -2806,9 +2362,18 @@ "OFSbGfsz": [ "OrcaArena/Arena PLA Basic" ], + "OFSfm8iP": [ + "BBL/BETA PLA Heat Color Change" + ], + "OFSiCZP3": [ + "BBL/BETA PETG-GF" + ], "OFSqIcJC": [ "Flashforge/Flashforge TPU 95A" ], + "OFSw6Mor": [ + "BBL/addnorth PA Adura FDA" + ], "OFSwbBWS": [], "OFT2jon4": [ "Qidi/QIDI ABS Rapido" @@ -2816,10 +2381,14 @@ "OFTGHyNC": [ "OrcaFilamentLibrary/Bambu PLA Impact" ], + "OFTHDCqA": [ + "BBL/Bambu PLA Pure" + ], "OFTOPcx0": [ "OrcaFilamentLibrary/Eolas Prints TPU Transition" ], "OFTRZ8Y4": [ + "BBL/Bambu PETG-CF", "OrcaFilamentLibrary/Bambu PETG-CF" ], "OFTSXxzE": [ @@ -2856,6 +2425,9 @@ "OFU3QXL7": [ "re3D/re3D PC" ], + "OFU5JPDy": [ + "BBL/addnorth PETG PRO Matte" + ], "OFU7CKZt": [ "Volumic/Volumic ASA Ultra (Performance)" ], @@ -2875,11 +2447,15 @@ "Anycubic/Anycubic PEBA 95A" ], "OFUanySo": [ + "BBL/Bambu PLA Silk+", "OrcaFilamentLibrary/Bambu PLA Silk+" ], "OFUmS5z5": [ "Creality/eSUN ASA+" ], + "OFUtiVRn": [ + "BBL/addnorth PETG ESD" + ], "OFUyDDNv": [ "Elegoo/Elegoo PC", "OrcaFilamentLibrary/Elegoo PC" @@ -2900,8 +2476,12 @@ "OFV8Mxqx": [], "OFVBlUFH": [], "OFVCkX5w": [ + "BBL/Bambu TPU 95A", "OrcaFilamentLibrary/Bambu TPU 95A" ], + "OFVDWuxl": [ + "BBL/addnorth PLA HT-PLA PRO Matte" + ], "OFVHMFJX": [ "Qidi/QIDI PETG Tough 0.2 nozzle" ], @@ -2913,6 +2493,7 @@ "Eryone/Eryone ASA" ], "OFW29a9R": [ + "BBL/PolyTerra PLA", "OrcaArena/PolyTerra PLA", "OrcaFilamentLibrary/PolyTerra PLA", "Snapmaker/PolyTerra PLA" @@ -2920,12 +2501,18 @@ "OFW5FqkL": [ "Qidi/QIDI PLA Rapido Silk" ], + "OFW8M3CY": [ + "BBL/BETA PLA Chameleon" + ], "OFW8lqnb": [ "Snapmaker/Snapmaker PETG Translucent" ], "OFWDe7YH": [ "Qidi/QIDI UltraPA" ], + "OFWK0Y9A": [ + "BBL/addnorth PA Adura" + ], "OFWRITFw": [ "Prusa/Prusament rPLA" ], @@ -2952,6 +2539,7 @@ "Anker/Generic PLA-CF", "Anycubic/Generic PLA-CF", "Artillery/Generic PLA-CF", + "BBL/Generic PLA-CF", "Blocks/Generic PLA-CF", "Creality/Generic PLA-CF", "Custom/Generic PLA-CF", @@ -2976,6 +2564,7 @@ "re3D/re3D PETG" ], "OFX0ycRQ": [ + "BBL/Fiberon PA12-CF", "OrcaFilamentLibrary/Fiberon PA12-CF" ], "OFX2zcrM": [ @@ -2986,6 +2575,7 @@ "OrcaFilamentLibrary/Eolas Prints ABS" ], "OFXIbw5D": [ + "BBL/Bambu PLA Matte", "OrcaFilamentLibrary/Bambu PLA Matte" ], "OFXJ9iom": [ @@ -3010,6 +2600,7 @@ "Artillery/Artillery PLA Basic" ], "OFXkm8q1": [ + "BBL/Generic PP-CF", "Creality/Generic PP-CF", "OrcaFilamentLibrary/Generic PP-CF", "Tiertime/Generic PP-CF" @@ -3031,6 +2622,7 @@ "OrcaFilamentLibrary/Elegoo PLA Silk" ], "OFXzQ4yL": [ + "BBL/Bambu ASA-Aero", "OrcaFilamentLibrary/Bambu ASA-Aero" ], "OFY0F5qA": [ @@ -3046,6 +2638,7 @@ "Anker/Generic ABS", "Anycubic/Generic ABS", "Artillery/Generic ABS", + "BBL/Generic ABS", "Blocks/Generic ABS", "Chuanying/Generic ABS", "Co Print/Generic ABS", @@ -3082,10 +2675,14 @@ "OrcaFilamentLibrary/PolyLite Dual PLA", "Snapmaker/PolyLite Dual PLA" ], + "OFYGrfHY": [ + "BBL/BETA PETG Fluorescence" + ], "OFYPdQJh": [ "Anker/Generic PETG", "Anycubic/Generic PETG", "Artillery/Generic PETG", + "BBL/Generic PETG", "Blocks/Generic PETG", "CONSTRUCT3D/Generic PETG", "Chuanying/Generic PETG", @@ -3142,6 +2739,12 @@ "OFZ4QbfK": [ "OrcaFilamentLibrary/FilAr PLA Rosa Flamenco" ], + "OFZGrQTU": [ + "BBL/addnorth PETG Economy" + ], + "OFZJft47": [ + "BBL/addnorth PLA Economy" + ], "OFZLtWYs": [ "Qidi/QIDI ABS-GF25" ], @@ -3151,6 +2754,9 @@ "OFZivHGL": [ "Snapmaker/Snapmaker Dual PLA" ], + "OFZqZMuv": [ + "BBL/BETA ASA" + ], "OFZr862X": [ "Creality/Generic PLA HF", "Prusa/Generic PLA HF" @@ -3180,6 +2786,7 @@ "LH/LHS ASA" ], "OFaQMgRH": [ + "BBL/Bambu PLA Tough", "OrcaFilamentLibrary/Bambu PLA Tough" ], "OFaRjiIm": [ @@ -3222,6 +2829,7 @@ "Eryone/Eryone PP-CF" ], "OFc3xdm9": [ + "BBL/Overture PLA", "OrcaFilamentLibrary/Overture PLA", "Qidi/Overture PLA" ], @@ -3231,6 +2839,9 @@ "OFcBJQcC": [ "Snapmaker/Snapmaker Dual TPU High-Flow" ], + "OFcBl0nJ": [ + "BBL/Fiberon PA612-CF15" + ], "OFcJDtTx": [ "Artillery/Artillery TPU" ], @@ -3244,9 +2855,15 @@ "BBL/Overture Air PLA", "OrcaFilamentLibrary/Overture Air PLA" ], + "OFcnWTJB": [ + "BBL/BETA PLA Glitter" + ], "OFcogyWl": [ "WonderMaker/WonderMaker PLA Metal" ], + "OFcpa50Z": [ + "BBL/addnorth PLA-CF Carbon Fiber" + ], "OFctg8r1": [ "CoLiDo/CoLiDo PLA+" ], @@ -3255,10 +2872,12 @@ "OrcaFilamentLibrary/Overture TPU" ], "OFcytyoA": [ + "BBL/Fiberon PETG-ESD", "OrcaFilamentLibrary/Fiberon PETG-ESD", "Snapmaker/Fiberon PETG-ESD" ], "OFd0Fv0k": [ + "BBL/Generic PE-CF", "OrcaFilamentLibrary/Generic PE-CF", "Tiertime/Generic PE-CF" ], @@ -3313,6 +2932,9 @@ "OFeCJqxx": [ "Qidi/QIDI ABS Rapido Metal" ], + "OFeF4UNh": [ + "BBL/BETA PLA Silk" + ], "OFeIyhUx": [ "Anycubic/Anycubic PC-CF" ], @@ -3333,6 +2955,7 @@ ], "OFesA6rF": [ "Anker/Generic PLA Silk", + "BBL/Generic PLA Silk", "Creality/Generic PLA Silk", "FLSun/Generic PLA Silk", "Flashforge/Generic PLA Silk", @@ -3359,12 +2982,14 @@ "InfiMech/InfiMech PC" ], "OFf6mfQO": [ + "BBL/Bambu Support for ABS", "OrcaFilamentLibrary/Bambu Support for ABS" ], "OFf6ynfH": [ "FlyingBear/FlyingBear PETG Basic" ], "OFfBpSRI": [ + "BBL/Bambu ASA", "OrcaFilamentLibrary/Bambu ASA" ], "OFfD87Gy": [ @@ -3419,6 +3044,7 @@ "Snapmaker/Snapmaker Dual PLA Metal" ], "OFg57Nmc": [ + "BBL/Bambu PC FR", "OrcaFilamentLibrary/Bambu PC FR" ], "OFg8hMzT": [ @@ -3427,6 +3053,7 @@ "OFg8ndtj": [ "Anker/Generic PA", "Anycubic/Generic PA", + "BBL/Generic PA", "Blocks/Generic PA", "Creality/Generic PA", "Custom/Generic PA", @@ -3461,6 +3088,7 @@ "Anker/Generic TPU", "Anycubic/Generic TPU", "Artillery/Generic TPU", + "BBL/Generic TPU", "Blocks/Generic TPU", "Chuanying/Generic TPU", "Co Print/Generic TPU", @@ -3514,12 +3142,16 @@ "Creality/Generic PA6-GF" ], "OFhASRWj": [ + "BBL/Panchroma PLA Temp Shift", "OrcaFilamentLibrary/Panchroma PLA Temp Shift", "Snapmaker/Panchroma PLA Temp Shift" ], "OFhMO9Kh": [ "OrcaFilamentLibrary/GreenGate3D PETG" ], + "OFhN09f0": [ + "BBL/addnorth PC BLend HT LCF" + ], "OFhO5aEJ": [ "Ratrig/RatRig PunkFil ABS" ], @@ -3527,6 +3159,7 @@ "Snapmaker/Snapmaker PLA-CF" ], "OFhQfUQY": [ + "BBL/Generic SBS", "OrcaFilamentLibrary/Generic SBS", "Tiertime/Generic SBS" ], @@ -3570,6 +3203,7 @@ "Snapmaker/Snapmaker PLA Basic" ], "OFhuaUQB": [ + "BBL/Bambu ABS", "OrcaFilamentLibrary/Bambu ABS", "Qidi/Bambu ABS" ], @@ -3615,6 +3249,7 @@ "Creality/Generic Support for PLA" ], "OFitS8al": [ + "BBL/PolyLite PLA Neon", "Snapmaker/PolyLite PLA Neon" ], "OFiwEbze": [ @@ -3645,6 +3280,9 @@ "OFjUGUIK": [ "iQ/Fiberthree PACF Pro P1" ], + "OFjUXn67": [ + "BBL/BETA ABS" + ], "OFjVOWfJ": [ "Anycubic/Anycubic PLA High Speed" ], @@ -3652,6 +3290,7 @@ "OrcaArena/Arena PLA Impact" ], "OFjb0wos": [ + "BBL/Panchroma PLA Metallic", "OrcaFilamentLibrary/Panchroma PLA Metallic", "Snapmaker/Panchroma PLA Metallic" ], @@ -3668,6 +3307,9 @@ "OFjoAe0R": [ "Qidi/Qidi PLA-CF" ], + "OFjogeYN": [ + "BBL/BETA PETG Glitter" + ], "OFjorDcx": [ "OrcaFilamentLibrary/FDplast ABS" ], @@ -3681,6 +3323,7 @@ "Prusa/Prusament PC-CF" ], "OFk8t9mz": [ + "BBL/Fiberon PETG-rCF", "OrcaFilamentLibrary/Fiberon PETG-rCF" ], "OFkAltI8": [ @@ -3693,7 +3336,11 @@ "OFkGvN4d": [ "OrcaFilamentLibrary/FilAr PLA Verde Pixel" ], + "OFkHbjUv": [ + "BBL/BETA PLA Metallic" + ], "OFkOviHk": [ + "BBL/Fiberon PA6-CF", "OrcaFilamentLibrary/Fiberon PA6-CF" ], "OFkR8E2c": [ @@ -3711,6 +3358,7 @@ "InfiMech/Other PLA Hyper" ], "OFknl9Iz": [ + "BBL/Bambu ABS-GF", "OrcaFilamentLibrary/Bambu ABS-GF" ], "OFkoLUtR": [ @@ -3744,12 +3392,18 @@ "OFlSNkhc": [ "OrcaFilamentLibrary/Eolas Prints ASA" ], + "OFlfuj2k": [ + "BBL/Bambu TPU 85A" + ], "OFlgMgNM": [ "Flashforge/Flashforge PPS" ], "OFllmFhT": [ "Elegoo/Generic PETG PRO" ], + "OFlmxlDG": [ + "BBL/BETA HIPS" + ], "OFln72PT": [ "Elegoo/Elegoo PLA-CF", "OrcaFilamentLibrary/Elegoo PLA-CF" @@ -3762,6 +3416,7 @@ "Snapmaker/Snapmaker PLA" ], "OFlwmqrC": [ + "BBL/Polymaker HT-PLA-GF", "OrcaFilamentLibrary/Polymaker HT-PLA-GF", "Snapmaker/Polymaker HT-PLA-GF" ], @@ -3793,6 +3448,9 @@ "OFmKU2Ha": [ "Eryone/Eryone PLA" ], + "OFmN2lvw": [ + "BBL/Generic TPU for AMS" + ], "OFmY0l6t": [ "Creality/Generic PLA Matte", "Elegoo/Generic PLA Matte", @@ -3815,9 +3473,11 @@ "Anycubic/Anycubic PLA" ], "OFmn9NZL": [ + "BBL/FusRock ABS-GF", "OrcaFilamentLibrary/FusRock ABS-GF" ], "OFmpMwxS": [ + "BBL/Generic PLA High Speed", "Creality/Generic PLA High Speed", "FLSun/Generic PLA High Speed", "Flashforge/Generic PLA High Speed", @@ -3825,6 +3485,9 @@ "Qidi/Generic PLA High Speed", "Tiertime/Generic PLA High Speed" ], + "OFmt513L": [ + "BBL/BETA PETG Transparent" + ], "OFmveLWz": [ "Elegoo/Elegoo PETG-GF", "OrcaFilamentLibrary/Elegoo PETG-GF" @@ -3839,6 +3502,9 @@ "OFn6WpN7": [ "Qidi/QIDI PA12-CF" ], + "OFnBvPhb": [ + "BBL/addnorth PLA rPLA RE-ADD" + ], "OFnHc3D6": [ "Creality/eSUN PLA-CF" ], @@ -3869,15 +3535,22 @@ "OFnejEt4": [ "OrcaFilamentLibrary/FilAr PETG Cian" ], + "OFnfxTvi": [ + "BBL/Bambu PLA Lite" + ], "OFngcE81": [ "LH/LHS TPU Foamy 78A" ], "OFniMuTN": [ + "BBL/Bambu PA6-CF", "OrcaFilamentLibrary/Bambu PA6-CF" ], "OFnmp6rt": [ "Anycubic/Anycubic PLA+" ], + "OFnpX8uh": [ + "BBL/BETA PETG Matte" + ], "OFnyHfcv": [ "Ratrig/Generic ABS BigNozzle" ], @@ -3885,6 +3558,7 @@ "Qidi/QIDI PAHT-GF" ], "OFo2UF2C": [ + "BBL/Generic BVOH", "Creality/Generic BVOH", "Flashforge/Generic BVOH", "OrcaFilamentLibrary/Generic BVOH", @@ -3901,6 +3575,7 @@ ], "OFoYSJKi": [ "Anker/Generic PETG-CF", + "BBL/Generic PETG-CF", "Creality/Generic PETG-CF", "Elegoo/Generic PETG-CF", "Flashforge/Generic PETG-CF", @@ -3918,6 +3593,7 @@ "OrcaFilamentLibrary/AliZ PETG" ], "OFoiVqVM": [ + "BBL/Bambu PLA Basic", "OrcaFilamentLibrary/Bambu PLA Basic" ], "OFojbdhR": [ @@ -3927,6 +3603,7 @@ "Cubicon/Cubicon ABSk" ], "OFovEIbw": [ + "BBL/Bambu PETG HF", "OrcaFilamentLibrary/Bambu PETG HF" ], "OFp4ETDP": [ @@ -3945,6 +3622,7 @@ "Cubicon/Cubicon ABS" ], "OFpPGSKG": [ + "BBL/SUNLU Silk PLA+", "Flashforge/SUNLU Silk PLA+", "OrcaFilamentLibrary/SUNLU Silk PLA+" ], @@ -3952,9 +3630,13 @@ "Peopoly/Peopoly Lancer PETG-C" ], "OFpW4gdi": [ + "BBL/SUNLU PLA Matte", "Flashforge/SUNLU PLA Matte", "OrcaFilamentLibrary/SUNLU PLA Matte" ], + "OFpdjFI3": [ + "BBL/BETA PLA UV Color Change" + ], "OFpu74Qe": [ "Snapmaker/Snapmaker PLA Eco" ], @@ -3968,6 +3650,7 @@ "OrcaFilamentLibrary/FilAr PETG Negro Azabache" ], "OFq9svOz": [ + "BBL/Generic PPS", "Creality/Generic PPS", "Tiertime/Generic PPS" ], @@ -3975,12 +3658,17 @@ "Ratrig/Generic PLA BigNozzle" ], "OFqGRZyH": [ + "BBL/Numakers PLA+", "OrcaFilamentLibrary/Numakers PLA+" ], "OFqINlYj": [ + "BBL/eSUN PLA+", "Creality/eSUN PLA+", "OrcaFilamentLibrary/eSUN PLA+" ], + "OFqTwtXM": [ + "BBL/addnorth PETG rPETG Matte" + ], "OFqcL5UF": [ "Qidi/QIDI Support For PET/PA" ], @@ -3988,6 +3676,7 @@ "OrcaFilamentLibrary/FilAr PLA-mate Celeste Cielo" ], "OFqw2PQA": [ + "BBL/Panchroma CoPE", "OrcaFilamentLibrary/Panchroma CoPE", "Snapmaker/Panchroma CoPE" ], @@ -3998,6 +3687,7 @@ "Anycubic/Anycubic PLA Slik" ], "OFrKLeE3": [ + "BBL/Bambu PLA Metal", "OrcaFilamentLibrary/Bambu PLA Metal" ], "OFrLiqiM": [ @@ -4007,6 +3697,7 @@ "Creality/CR-PLA Carbon" ], "OFrOh600": [ + "BBL/Panchroma PLA Matte", "Creality/Panchroma PLA Matte", "OrcaFilamentLibrary/Panchroma PLA Matte", "Snapmaker/Panchroma PLA Matte" @@ -4020,6 +3711,9 @@ "OFrjacXf": [ "Flashforge/Flashforge PET-CF" ], + "OFrqMlGt": [ + "BBL/BETA PETG" + ], "OFrr67nG": [ "OrcaArena/Arena PC" ], @@ -4041,6 +3735,7 @@ "Volumic/Volumic PP Ultra" ], "OFsFon5l": [ + "BBL/Generic HIPS", "Chuanying/Generic HIPS", "Creality/Generic HIPS", "Flashforge/Generic HIPS", @@ -4048,6 +3743,7 @@ "Tiertime/Generic HIPS" ], "OFsHSVZc": [ + "BBL/Bambu Support W", "OrcaFilamentLibrary/Bambu Support W" ], "OFsP8PKH": [ @@ -4055,6 +3751,7 @@ ], "OFsRDvTM": [ "Anycubic/Panchroma PLA", + "BBL/Panchroma PLA", "OrcaFilamentLibrary/Panchroma PLA", "Snapmaker/Panchroma PLA" ], @@ -4062,6 +3759,7 @@ "OrcaFilamentLibrary/FilAr PETG Blanco Antartida" ], "OFsijjtH": [ + "BBL/Generic PP-GF", "OrcaFilamentLibrary/Generic PP-GF", "Tiertime/Generic PP-GF" ], @@ -4096,9 +3794,18 @@ "OFtRn8X8": [ "OrcaFilamentLibrary/FDplast SBS" ], + "OFtdVZpV": [ + "BBL/addnorth PLA X-PLA" + ], "OFtefokm": [ "OrcaFilamentLibrary/FilAr PLA-mate Blanco" ], + "OFtkLO6q": [ + "BBL/Bambu TPU 90A" + ], + "OFtndTHe": [ + "BBL/BETA PETG-CF" + ], "OFtpXCCv": [ "BBL/COEX ASA PRIME", "OrcaFilamentLibrary/COEX ASA PRIME" @@ -4122,6 +3829,7 @@ "Qidi/QIDI ASA-Aero" ], "OFu1evlr": [ + "BBL/Generic PCTG", "Creality/Generic PCTG", "OrcaFilamentLibrary/Generic PCTG", "Ratrig/Generic PCTG", @@ -4168,6 +3876,9 @@ "OFusbWjj": [ "Creality/Hyper PETG-CF" ], + "OFuvOt0r": [ + "BBL/BETA PLA Basic" + ], "OFuxH0Uz": [ "Volumic/Volumic FLEX93 Ultra" ], @@ -4178,6 +3889,7 @@ "Prusa/Prusament PC Blend" ], "OFvKUnLh": [ + "BBL/Bambu TPU 95A HF", "OrcaFilamentLibrary/Bambu TPU 95A HF" ], "OFvLppPU": [ @@ -4196,6 +3908,9 @@ "OFvaLVML": [ "Flashforge/Flashforge HIPS" ], + "OFvcIGee": [ + "BBL/addnorth TPU Pro Matte 85A" + ], "OFvdZ2bx": [ "Qidi/QIDI WOOD Rapido" ], @@ -4207,9 +3922,11 @@ "Snapmaker/Snapmaker TPU 95A" ], "OFvrXuV7": [ + "BBL/PolyLite ASA", "OrcaFilamentLibrary/PolyLite ASA" ], "OFvxIS9g": [ + "BBL/Fiberon PA12-CF10", "Snapmaker/Fiberon PA12-CF10" ], "OFvxghTE": [ @@ -4218,16 +3935,21 @@ "TwoTrees/Generic HS PLA" ], "OFvyB0Bz": [ + "BBL/PolyLite PLA Galaxy", "Snapmaker/PolyLite PLA Galaxy" ], "OFvzvwCu": [ "OrcaFilamentLibrary/Eolas Prints PLA High Speed" ], + "OFw4WD4T": [ + "BBL/Fiberon PETG-rCF08" + ], "OFwJ0qu2": [], "OFwLBAGf": [ "Qidi/HATCHBOX ABS" ], "OFwPrlCM": [ + "BBL/Bambu PETG Translucent", "OrcaFilamentLibrary/Bambu PETG Translucent" ], "OFwRJ4g0": [ @@ -4238,11 +3960,15 @@ "InfiMech/Other TPU" ], "OFwaYjL6": [ + "BBL/Fiberon PA6-GF", "OrcaFilamentLibrary/Fiberon PA6-GF" ], "OFwbsgWj": [ "re3D/re3D PC" ], + "OFwc74ck": [ + "BBL/BETA PLA Matte" + ], "OFwhLMs4": [ "Snapmaker/Snapmaker PLA SnapSpeed" ], @@ -4269,6 +3995,7 @@ "OrcaFilamentLibrary/Eolas Prints PETG UV Resistant" ], "OFxA1p01": [ + "BBL/Overture PLA Pro", "OrcaFilamentLibrary/Overture PLA Pro" ], "OFxDHUX8": [ @@ -4282,6 +4009,7 @@ "OrcaFilamentLibrary/Elegoo ABS" ], "OFxUwUeW": [ + "BBL/SUNLU PLA Marble", "Flashforge/SUNLU PLA Marble", "OrcaFilamentLibrary/SUNLU PLA Marble" ], @@ -4289,9 +4017,14 @@ "Snapmaker/Snapmaker J1 PETG-CF" ], "OFxe4rXr": [ + "BBL/PolyTerra PLA Marble", "Snapmaker/PolyTerra PLA Marble" ], + "OFxqf79Q": [ + "BBL/BETA PETG HF" + ], "OFy02QHU": [ + "BBL/PolyLite PLA Translucent", "Snapmaker/PolyLite PLA Translucent" ], "OFy14TRA": [ @@ -4312,12 +4045,18 @@ "OFyHgT60": [ "OrcaArena/Arena PLA Sparkle" ], + "OFyJjkek": [ + "BBL/addnorth TPU Pro Matte 95A" + ], "OFyLWVF3": [ "Creality/Generic PETG-GF" ], "OFyPG8v2": [ "Snapmaker/Snapmaker Dual PLA Eco" ], + "OFyPTnSk": [ + "BBL/BETA PETG Heat Color Change" + ], "OFyQwdaM": [ "Volumic/Volumic ABS Ultra (Performance)" ], @@ -4356,6 +4095,9 @@ "BBL/AliZ PLA", "OrcaFilamentLibrary/AliZ PLA" ], + "OFz1a1fy": [ + "BBL/BETA PETG Metallic" + ], "OFz5oHgf": [ "MagicMaker/Generic PEEK" ], @@ -4374,6 +4116,12 @@ "OFzY7N3Z": [ "Artillery/Artillery PLA" ], + "OFzaq7Yg": [ + "BBL/BETA TPU 98A" + ], + "OFzk5oAo": [ + "BBL/addnorth ABS rABS" + ], "OFzrUUxc": [], "OFztQ7rO": [ "LH/LHS ABS" @@ -4382,6 +4130,7 @@ "Flashforge/FusRock PET-GF" ], "OFzyIxba": [ + "BBL/Bambu PVA", "OrcaFilamentLibrary/Bambu PVA" ] }, @@ -6977,6 +6726,13 @@ "Soleyin Ultra PLA" ] ], + "OF03RK6r": [ + [ + "BETA", + "PLA", + "BETA PLA Metal" + ] + ], "OF0AquDh": [ [ "FusRock", @@ -6984,6 +6740,13 @@ "FusRock S-Multi" ] ], + "OF0EYBWQ": [ + [ + "addnorth", + "PETG", + "addnorth PETG Flame v0" + ] + ], "OF0FfcAG": [ [ "Anycubic", @@ -7110,6 +6873,13 @@ "Generic PETG Basic" ] ], + "OF1ID4N1": [ + [ + "addnorth", + "PA6", + "addnorth PA6 Addlantis" + ] + ], "OF1N1qMK": [ [ "Polymaker", @@ -7236,6 +7006,13 @@ "Elegoo Rapid TPU 95A" ] ], + "OF342jVN": [ + [ + "Bambu Lab", + "PLA", + "Bambu PLA Tough+" + ] + ], "OF3F63OE": [ [ "re3D", @@ -7257,6 +7034,13 @@ "CR-Silk" ] ], + "OF3PDEw3": [ + [ + "BETA", + "PLA", + "BETA PLA High Speed" + ] + ], "OF3WQaKK": [ [ "Creality", @@ -7348,6 +7132,20 @@ "Artillery PLA Basic+" ] ], + "OF4PKvem": [ + [ + "BETA", + "PLA", + "BETA PLA Fluorescence" + ] + ], + "OF4QZANi": [ + [ + "BETA", + "TPU", + "BETA TPU Matte" + ] + ], "OF4RvVuU": [ [ "Bambu Lab", @@ -7369,6 +7167,13 @@ "Snapmaker PETG" ] ], + "OF4XTfoI": [ + [ + "BETA", + "PETG", + "BETA PETG Marble" + ] + ], "OF4f8vVp": [ [ "WonderMaker", @@ -7425,6 +7230,13 @@ "Generic ABS HF" ] ], + "OF5B9sUc": [ + [ + "Polymaker", + "PA-GF", + "Fiberon PA6-GF25" + ] + ], "OF5BN24W": [ [ "Flashforge", @@ -7432,6 +7244,13 @@ "Flashforge PPA-GF" ] ], + "OF5BXhHF": [ + [ + "BETA", + "PLA", + "BETA PLA High Temp" + ] + ], "OF5CgdDq": [ [ "Polymaker", @@ -7439,6 +7258,13 @@ "PolyLite PLA" ] ], + "OF5LAnla": [ + [ + "BETA", + "PLA", + "BETA PLA Gradient" + ] + ], "OF5NqBfC": [ [ "Yumi", @@ -7586,6 +7412,13 @@ "Snapmaker J1 PVA" ] ], + "OF6Yn69v": [ + [ + "BETA", + "TPU", + "BETA TPU 90A" + ] + ], "OF6kj4jI": [ [ "iQ Materials", @@ -7600,6 +7433,13 @@ "Flashforge PLA Matte" ] ], + "OF6qw3Wb": [ + [ + "BETA", + "PA-CF", + "BETA PAHT-CF" + ] + ], "OF6rdQ6M": [ [ "Generic", @@ -7614,6 +7454,13 @@ "Hyper L-W PLA" ] ], + "OF71b7qO": [ + [ + "addnorth", + "PLA", + "addnorth PLA E-PLA" + ] + ], "OF72YYTd": [ [ "Snapmaker", @@ -7733,6 +7580,13 @@ "Flashforge HS PLA Burnt Ti" ] ], + "OF8QdQwS": [ + [ + "BETA", + "PLA", + "BETA PLA Silk+" + ] + ], "OF8Tlg47": [ [ "Generic", @@ -7901,6 +7755,20 @@ "Artillery PLA-CF" ] ], + "OFAc0Pr3": [ + [ + "Polymaker", + "PET-CF", + "Fiberon PET-CF17" + ] + ], + "OFAcJkl1": [ + [ + "addnorth", + "PETG-CF", + "addnorth PETG-CF Rigid X" + ] + ], "OFAebKg8": [ [ "Flashforge", @@ -7978,6 +7846,13 @@ "PolyLite PLA Luminous" ] ], + "OFBsbMMF": [ + [ + "addnorth", + "PA-CF", + "addnorth PA-CF Adura X" + ] + ], "OFBw6eEG": [ [ "Overture", @@ -8370,6 +8245,13 @@ "Generic TPU 64D" ] ], + "OFF5o7b2": [ + [ + "BETA", + "PLA", + "BETA PLA Youth" + ] + ], "OFF9OKoY": [ [ "Polymaker", @@ -8433,6 +8315,20 @@ "eSUN PETG-Basic" ] ], + "OFFbSnCD": [ + [ + "Bambu Lab", + "PLA", + "Bambu PLA Translucent" + ] + ], + "OFFfJ09N": [ + [ + "BETA", + "PETG", + "BETA PETG Glow" + ] + ], "OFFkCLBl": [ [ "Polymaker", @@ -8489,6 +8385,20 @@ "FilAr PLA-mate Gris" ] ], + "OFGVxj2A": [ + [ + "BETA", + "PLA", + "BETA PLA Wood" + ] + ], + "OFGc9l16": [ + [ + "BETA", + "PLA", + "BETA PLA Glow" + ] + ], "OFGcLA5R": [ [ "FilAr", @@ -8573,6 +8483,13 @@ "FilAr PLA Blanco Antartida" ] ], + "OFHHwrd1": [ + [ + "addnorth", + "PETG", + "addnorth PETG Base" + ] + ], "OFHWSM21": [ [ "Polymaker", @@ -8622,6 +8539,13 @@ "SUNLU PLA+ 2.0" ] ], + "OFI2MKy7": [ + [ + "BETA", + "TPU", + "BETA PEBA 90A" + ] + ], "OFI6WZpn": [ [ "Orca Arena", @@ -8636,6 +8560,13 @@ "FilAr PLA-mate Rojo" ] ], + "OFIBbYO5": [ + [ + "Bambu Lab", + "TPU-AMS", + "Bambu TPU for AMS" + ] + ], "OFIE3vOf": [ [ "Anycubic", @@ -8811,6 +8742,13 @@ "Snapmaker Dual ABS" ] ], + "OFJnEaCp": [ + [ + "BETA", + "PLA", + "BETA PLA Transparent" + ] + ], "OFJrvXth": [ [ "Snapmaker", @@ -8839,6 +8777,13 @@ "YUMI PLA Direct Drive" ] ], + "OFK7830e": [ + [ + "BETA", + "TPU", + "BETA TPU 95A" + ] + ], "OFK8XHPn": [ [ "Overture", @@ -8895,6 +8840,13 @@ "FilAr PLA Carpincho" ] ], + "OFKYBAWe": [ + [ + "BETA", + "PLA", + "BETA PLA Marble" + ] + ], "OFKZ9skj": [ [ "FilAr", @@ -8937,6 +8889,13 @@ "Panchroma PLA Marble" ] ], + "OFKyNkQz": [ + [ + "BETA", + "PETG", + "BETA PETG UV Color Change" + ] + ], "OFL9aRjN": [ [ "Snapmaker", @@ -9049,6 +9008,20 @@ "Hyper PETG-GF" ] ], + "OFLjDYxH": [ + [ + "addnorth", + "PLA", + "addnorth PLA X-PLA High Speed" + ] + ], + "OFLqgSuX": [ + [ + "BETA", + "PLA-CF", + "BETA PLA-CF" + ] + ], "OFLzx3J4": [ [ "Creality", @@ -9161,6 +9134,20 @@ "Elas PLA Basic" ] ], + "OFMzRg65": [ + [ + "BETA", + "PLA", + "BETA PLA PRO" + ] + ], + "OFN8QBhu": [ + [ + "addnorth", + "PLA", + "addnorth PLA Wood" + ] + ], "OFN9fefN": [ [ "Cubicon", @@ -9217,6 +9204,13 @@ "Generic High Flow PETG" ] ], + "OFNk8AvA": [ + [ + "BETA", + "PETG", + "BETA PETG Gradient" + ] + ], "OFNk8bxk": [ [ "Bambu Lab", @@ -9252,6 +9246,13 @@ "Generic PETG-CF10" ] ], + "OFO6GMJ3": [ + [ + "addnorth", + "TPU", + "addnorth TPU EasyFlex" + ] + ], "OFOABq7t": [ [ "Aliz", @@ -9287,6 +9288,13 @@ "Snapmaker PLA Full Spectrum" ] ], + "OFOQCfVa": [ + [ + "addnorth", + "PLA", + "addnorth PLA Premium Silk" + ] + ], "OFObG16Q": [ [ "InfiMech", @@ -9448,6 +9456,13 @@ "QIDI PETG Tough" ] ], + "OFQ5TxZ2": [ + [ + "addnorth", + "PA", + "addnorth PVDF Adamant S1" + ] + ], "OFQEGL7z": [ [ "FlyingBear", @@ -9546,6 +9561,13 @@ "QIDI TPU 95A-HF" ] ], + "OFRFhdqy": [ + [ + "addnorth", + "PLA", + "addnorth PLA Textura" + ] + ], "OFRJ325z": [ [ "LH Stinger", @@ -9665,6 +9687,20 @@ "Arena PLA Basic" ] ], + "OFSfm8iP": [ + [ + "BETA", + "PLA", + "BETA PLA Heat Color Change" + ] + ], + "OFSiCZP3": [ + [ + "BETA", + "PETG-CF", + "BETA PETG-GF" + ] + ], "OFSqIcJC": [ [ "Flashforge", @@ -9672,6 +9708,13 @@ "Flashforge TPU 95A" ] ], + "OFSw6Mor": [ + [ + "addnorth", + "PA", + "addnorth PA Adura FDA" + ] + ], "OFSwbBWS": [ [ "DREMC", @@ -9693,6 +9736,13 @@ "Bambu PLA Impact" ] ], + "OFTHDCqA": [ + [ + "Bambu Lab", + "PLA", + "Bambu PLA Pure" + ] + ], "OFTOPcx0": [ [ "Eolas Prints", @@ -9784,6 +9834,13 @@ "re3D PC" ] ], + "OFU5JPDy": [ + [ + "addnorth", + "PETG", + "addnorth PETG PRO Matte" + ] + ], "OFU7CKZt": [ [ "Volumic", @@ -9840,6 +9897,13 @@ "eSUN ASA+" ] ], + "OFUtiVRn": [ + [ + "addnorth", + "PETG", + "addnorth PETG ESD" + ] + ], "OFUyDDNv": [ [ "Elegoo", @@ -9896,6 +9960,13 @@ "Bambu TPU 95A" ] ], + "OFVDWuxl": [ + [ + "addnorth", + "PLA", + "addnorth PLA HT-PLA PRO Matte" + ] + ], "OFVHMFJX": [ [ "QIDI", @@ -9931,6 +10002,13 @@ "QIDI PLA Rapido Silk" ] ], + "OFW8M3CY": [ + [ + "BETA", + "PLA", + "BETA PLA Chameleon" + ] + ], "OFW8lqnb": [ [ "Snapmaker", @@ -9945,6 +10023,13 @@ "QIDI UltraPA" ] ], + "OFWK0Y9A": [ + [ + "addnorth", + "PA", + "addnorth PA Adura" + ] + ], "OFWRITFw": [ [ "Prusa Polymers", @@ -10197,6 +10282,13 @@ "PolyLite Dual PLA" ] ], + "OFYGrfHY": [ + [ + "BETA", + "PETG", + "BETA PETG Fluorescence" + ] + ], "OFYPdQJh": [ [ "Generic", @@ -10267,6 +10359,20 @@ "FilAr PLA Rosa Flamenco" ] ], + "OFZGrQTU": [ + [ + "addnorth", + "PETG", + "addnorth PETG Economy" + ] + ], + "OFZJft47": [ + [ + "addnorth", + "PLA", + "addnorth PLA Economy" + ] + ], "OFZLtWYs": [ [ "QIDI", @@ -10288,6 +10394,13 @@ "Snapmaker Dual PLA" ] ], + "OFZqZMuv": [ + [ + "BETA", + "ASA", + "BETA ASA" + ] + ], "OFZr862X": [ [ "Generic", @@ -10470,6 +10583,13 @@ "Snapmaker Dual TPU High-Flow" ] ], + "OFcBl0nJ": [ + [ + "Polymaker", + "PA-CF", + "Fiberon PA612-CF15" + ] + ], "OFcJDtTx": [ [ "Artillery", @@ -10498,6 +10618,13 @@ "Overture Air PLA" ] ], + "OFcnWTJB": [ + [ + "BETA", + "PLA", + "BETA PLA Glitter" + ] + ], "OFcogyWl": [ [ "WonderMaker", @@ -10505,6 +10632,13 @@ "WonderMaker PLA Metal" ] ], + "OFcpa50Z": [ + [ + "addnorth", + "PLA-CF", + "addnorth PLA-CF Carbon Fiber" + ] + ], "OFctg8r1": [ [ "CoLiDo", @@ -10652,6 +10786,13 @@ "QIDI ABS Rapido Metal" ] ], + "OFeF4UNh": [ + [ + "BETA", + "PLA", + "BETA PLA Silk" + ] + ], "OFeIyhUx": [ [ "Anycubic", @@ -11016,6 +11157,13 @@ "GreenGate3D PETG" ] ], + "OFhN09f0": [ + [ + "addnorth", + "PC", + "addnorth PC BLend HT LCF" + ] + ], "OFhO5aEJ": [ [ "RatRig", @@ -11289,6 +11437,13 @@ "Fiberthree PACF Pro P1" ] ], + "OFjUXn67": [ + [ + "BETA", + "ABS", + "BETA ABS" + ] + ], "OFjVOWfJ": [ [ "Anycubic", @@ -11338,6 +11493,13 @@ "Qidi PLA-CF" ] ], + "OFjogeYN": [ + [ + "BETA", + "PETG", + "BETA PETG Glitter" + ] + ], "OFjorDcx": [ [ "FDplast", @@ -11394,6 +11556,13 @@ "FilAr PLA Verde Pixel" ] ], + "OFkHbjUv": [ + [ + "BETA", + "PLA", + "BETA PLA Metallic" + ] + ], "OFkOviHk": [ [ "Polymaker", @@ -11506,6 +11675,13 @@ "Eolas Prints ASA" ] ], + "OFlfuj2k": [ + [ + "Bambu Lab", + "TPU", + "Bambu TPU 85A" + ] + ], "OFlgMgNM": [ [ "Flashforge", @@ -11520,6 +11696,13 @@ "Generic PETG PRO" ] ], + "OFlmxlDG": [ + [ + "BETA", + "HIPS", + "BETA HIPS" + ] + ], "OFln72PT": [ [ "Elegoo", @@ -11611,6 +11794,13 @@ "Eryone PLA" ] ], + "OFmN2lvw": [ + [ + "Generic", + "TPU-AMS", + "Generic TPU for AMS" + ] + ], "OFmY0l6t": [ [ "Generic", @@ -11667,6 +11857,13 @@ "Generic PLA High Speed" ] ], + "OFmt513L": [ + [ + "BETA", + "PETG", + "BETA PETG Transparent" + ] + ], "OFmveLWz": [ [ "Elegoo", @@ -11695,6 +11892,13 @@ "QIDI PA12-CF" ] ], + "OFnBvPhb": [ + [ + "addnorth", + "PLA", + "addnorth PLA rPLA RE-ADD" + ] + ], "OFnHc3D6": [ [ "eSUN", @@ -11765,6 +11969,13 @@ "FilAr PETG Cian" ] ], + "OFnfxTvi": [ + [ + "Bambu Lab", + "PLA", + "Bambu PLA Lite" + ] + ], "OFngcE81": [ [ "LH Stinger", @@ -11786,6 +11997,13 @@ "Anycubic PLA+" ] ], + "OFnpX8uh": [ + [ + "BETA", + "PETG", + "BETA PETG Matte" + ] + ], "OFnyHfcv": [ [ "Generic", @@ -11933,6 +12151,13 @@ "SUNLU PLA Matte" ] ], + "OFpdjFI3": [ + [ + "BETA", + "PLA", + "BETA PLA UV Color Change" + ] + ], "OFpu74Qe": [ [ "Snapmaker", @@ -11989,6 +12214,13 @@ "eSUN PLA+" ] ], + "OFqTwtXM": [ + [ + "addnorth", + "PETG", + "addnorth PETG rPETG Matte" + ] + ], "OFqcL5UF": [ [ "QIDI", @@ -12073,6 +12305,13 @@ "Flashforge PET-CF" ] ], + "OFrqMlGt": [ + [ + "BETA", + "PETG", + "BETA PETG" + ] + ], "OFrr67nG": [ [ "Orca Arena", @@ -12234,6 +12473,13 @@ "FDplast SBS" ] ], + "OFtdVZpV": [ + [ + "addnorth", + "PLA", + "addnorth PLA X-PLA" + ] + ], "OFtefokm": [ [ "FilAr", @@ -12241,6 +12487,20 @@ "FilAr PLA-mate Blanco" ] ], + "OFtkLO6q": [ + [ + "Bambu Lab", + "TPU", + "Bambu TPU 90A" + ] + ], + "OFtndTHe": [ + [ + "BETA", + "PETG-CF", + "BETA PETG-CF" + ] + ], "OFtpXCCv": [ [ "COEX 3D", @@ -12388,6 +12648,13 @@ "Hyper PETG-CF" ] ], + "OFuvOt0r": [ + [ + "BETA", + "PLA", + "BETA PLA Basic" + ] + ], "OFuxH0Uz": [ [ "Volumic", @@ -12451,6 +12718,13 @@ "Flashforge HIPS" ] ], + "OFvcIGee": [ + [ + "addnorth", + "TPU", + "addnorth TPU Pro Matte 85A" + ] + ], "OFvdZ2bx": [ [ "QIDI", @@ -12507,6 +12781,13 @@ "Eolas Prints PLA High Speed" ] ], + "OFw4WD4T": [ + [ + "Polymaker", + "PETG-CF", + "Fiberon PETG-rCF08" + ] + ], "OFwJ0qu2": [ [ "DREMC", @@ -12556,6 +12837,13 @@ "re3D PC" ] ], + "OFwc74ck": [ + [ + "BETA", + "PLA", + "BETA PLA Matte" + ] + ], "OFwhLMs4": [ [ "Snapmaker", @@ -12661,6 +12949,13 @@ "PolyTerra PLA Marble" ] ], + "OFxqf79Q": [ + [ + "BETA", + "PETG", + "BETA PETG HF" + ] + ], "OFy02QHU": [ [ "Polymaker", @@ -12710,6 +13005,13 @@ "Arena PLA Sparkle" ] ], + "OFyJjkek": [ + [ + "addnorth", + "TPU", + "addnorth TPU Pro Matte 95A" + ] + ], "OFyLWVF3": [ [ "Generic", @@ -12724,6 +13026,13 @@ "Snapmaker Dual PLA Eco" ] ], + "OFyPTnSk": [ + [ + "BETA", + "PETG", + "BETA PETG Heat Color Change" + ] + ], "OFyQwdaM": [ [ "Volumic", @@ -12808,6 +13117,13 @@ "AliZ PLA" ] ], + "OFz1a1fy": [ + [ + "BETA", + "PETG", + "BETA PETG Metallic" + ] + ], "OFz5oHgf": [ [ "Generic", @@ -12850,6 +13166,20 @@ "Artillery PLA" ] ], + "OFzaq7Yg": [ + [ + "BETA", + "TPU", + "BETA TPU 98A" + ] + ], + "OFzk5oAo": [ + [ + "addnorth", + "ABS", + "addnorth ABS rABS" + ] + ], "OFzrUUxc": [ [ "DREMC",