mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-18 21:20:57 +00:00
ENH: update gcode for H2D
1.Update start gcode and layer change gcode jira: NONE Signed-off-by: xun.zhang <xun.zhang@bambulab.com> Change-Id: I592ddb08740c5432b5546c5608516ba6288c5ee9 (cherry picked from commit 56a8b38fe84948f3483dd01fa0c08bfa944a65be)
This commit is contained in:
xun.zhang authored and Noisyfox committed
1 parent
3a2f939f9b
commit
de6996c0ae
1 file changed
+2
-2
@@ -115,9 +115,9 @@
|
||||
"TPU",
|
||||
"PPS-CF,PPA-CF"
|
||||
],
|
||||
"machine_start_gcode": ";M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\n;===== machine: H2D =========================\n;===== date: 20250411 =====================\n\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400\n;M73 P99\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B9 L99 C61 D9 M99 E61 F9 N99 \nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B18 L99 C61 D18 M99 E61 F18 N99 \nM1006 W\n;=====printer start sound ===================\n\n;===== reset machine status =================\nM204 S10000\nM630 S0 P0\n\nG90\nM17 D ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nG29.1 Z{+0.0} ; clear z-trim value first\nM983.1 M1 \nM901 D4\nM481 S0 ; turn off cutter pos comp\n;===== reset machine status =================\n\nM620 M ;enable remap\n\n;===== avoid end stop =================\nG91\nG380 S2 Z22 F1200\nG380 S2 Z-12 F1200\nG90\n;===== avoid end stop =================\n\n;==== set airduct mode ==== \n\n{if (overall_chamber_temperature >= 40)}\n\n M145 P1 ; set airduct mode to heating mode for heating\n M106 P2 S0 ; turn off auxiliary fan\n M106 P3 S0 ; turn off chamber fan\n\n{else}\n M145 P0 ; set airduct mode to cooling mode for cooling\n M106 P2 S178 ; turn on auxiliary fan for cooling\n M106 P3 S127 ; turn on chamber fan for cooling\n M140 S0 ; stop heatbed from heating\n\n M1002 gcode_claim_action : 29\n M191 S0 ; wait for chamber temp\n M142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling\n M106 P2 S0 ; turn off auxiliary fan\n\n{endif}\n;==== set airduct mode ==== \n\n;===== start to heat heatbed & hotend==========\n\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n\n M104 S140 A\n M140 S[bed_temperature_initial_layer_single]\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n ;===== set chamber temperature ==========\n\n;===== start to heat heatbead & hotend==========\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== first homing start =====\nM1002 gcode_claim_action : 13\n\nG28 X T300\n\nG150.1 F18000 ; wipe mouth to avoid filament stick to heatbed\nG150.3 F18000\nM400 P200\nM972 S35 P0 C0\nM972 S24 P0 T2000\n{if curr_bed_type==\"Textured PEI Plate\"}\nM972 S26 P0 C0\n{else}\nM972 S36 P0 C0 X1\n{endif}\n\nG90\nG1 X175 Y160 F30000\n\nG28 Z P0 T250\n\n;===== first homign end =====\n\nM400\n;M73 P99\n\n;===== detection start =====\n\n T1001\n G383.4 ; left-extruder load status detection\n \n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-80} A ; rise temp in advance\n\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n M972 S19 P0 C0 ; heatbed presence detection\nM623\n\n M972 S14 P0 ; nozzle type detection\n\n;===== detection end =====\n\nM400\n;M73 P99\n\n;===== prepare print temperature and material ==========\nM400\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on input shaping\n\nG29.2 S0 ; avoid invalid abl data\n\nM620.10 A0 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} H{nozzle_diameter[initial_no_support_extruder]} T{nozzle_temperature_range_high[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\nM620.10 A1 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} H{nozzle_diameter[initial_no_support_extruder]} T{nozzle_temperature_range_high[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\n\n{if filament_type[initial_no_support_extruder] == \"TPU\"}\n M620.11 S0 L0 I[initial_no_support_extruder] E-{retraction_distances_when_cut[initial_no_support_extruder]} F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n{else}\n{if filament_type[initial_no_support_extruder] == \"PA\"}\n M620.11 S1 L0 I[initial_no_support_extruder] R4 D2 E-{retraction_distances_when_cut[initial_no_support_extruder]} F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n{else}\n M620.11 S1 L0 I[initial_no_support_extruder] R10 D8 E-{retraction_distances_when_cut[initial_no_support_extruder]} F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n{endif}\n{endif}\n\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\nM1002 gcode_claim_action : 4\nM1002 set_filament_type:UNKNOWN\nM400\nT[initial_no_support_extruder]\nM400\nM628 S0\nM629\nM400\nM1002 seLine truncated
|
||||
"machine_start_gcode": ";===== machine: H2D =========================\n;===== date: 20250416 =====================\n\n;M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400\n;M73 P99\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B9 L99 C61 D9 M99 E61 F9 N99 \nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B18 L99 C61 D18 M99 E61 F18 N99 \nM1006 W\n;=====printer start sound ===================\n\n;===== reset machine status =================\nM204 S10000\nM630 S0 P0\n\nG90\nM17 D ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nG29.1 Z{+0.0} ; clear z-trim value first\nM983.1 M1 \nM901 D4\nM481 S0 ; turn off cutter pos comp\n;===== reset machine status =================\n\nM620 M ;enable remap\n\n;===== avoid end stop =================\nG91\nG380 S2 Z22 F1200\nG380 S2 Z-12 F1200\nG90\n;===== avoid end stop =================\n\n;==== set airduct mode ==== \n\n{if (overall_chamber_temperature >= 40)}\n\n M145 P1 ; set airduct mode to heating mode for heating\n M106 P2 S0 ; turn off auxiliary fan\n M106 P3 S0 ; turn off chamber fan\n\n{else}\n M145 P0 ; set airduct mode to cooling mode for cooling\n M106 P2 S178 ; turn on auxiliary fan for cooling\n M106 P3 S127 ; turn on chamber fan for cooling\n M140 S0 ; stop heatbed from heating\n\n M1002 gcode_claim_action : 29\n M191 S0 ; wait for chamber temp\n M142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling\n M106 P2 S0 ; turn off auxiliary fan\n\n{endif}\n;==== set airduct mode ==== \n\n;===== start to heat heatbed & hotend==========\n\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n\n M104 S140 A\n M140 S[bed_temperature_initial_layer_single]\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n ;===== set chamber temperature ==========\n\n;===== start to heat heatbead & hotend==========\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== first homing start =====\nM1002 gcode_claim_action : 13\n\nG28 X T300\n\nG150.1 F18000 ; wipe mouth to avoid filament stick to heatbed\nG150.3 F18000\nM400 P200\nM972 S35 P0 C0\nM972 S24 P0 T2000\n{if curr_bed_type==\"Textured PEI Plate\"}\nM972 S26 P0 C0\n{else}\nM972 S36 P0 C0 X1\n{endif}\n\nG90\nG1 X175 Y160 F30000\n\nG28 Z P0 T250\n\n;===== first homign end =====\n\nM400\n;M73 P99\n\n;===== detection start =====\n\n T1001\n G383.4 ; left-extruder load status detection\n \n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-80} A ; rise temp in advance\n\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n M972 S19 P0 C0 ; heatbed presence detection\nM623\n\n M972 S14 P0 ; nozzle type detection\n\n;===== detection end =====\n\nM400\n;M73 P99\n\n;===== prepare print temperature and material ==========\nM400\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on input shaping\n\nG29.2 S0 ; avoid invalid abl data\n\nM620.10 A0 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} H{nozzle_diameter[initial_no_support_extruder]} T{nozzle_temperature_range_high[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\nM620.10 A1 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} H{nozzle_diameter[initial_no_support_extruder]} T{nozzle_temperature_range_high[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\n\n{if filament_type[initial_no_support_extruder] == \"TPU\"}\n M620.11 S0 L0 I[initial_no_support_extruder] E-{retraction_distances_when_cut[initial_no_support_extruder]} F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n{else}\n{if filament_type[initial_no_support_extruder] == \"PA\"}\n M620.11 S1 L0 I[initial_no_support_extruder] R4 D2 E-{retraction_distances_when_cut[initial_no_support_extruder]} F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n{else}\n M620.11 S1 L0 I[initial_no_support_extruder] R10 D8 E-{retraction_distances_when_cut[initial_no_support_extruder]} F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n{endif}\n{endif}\n\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\nM1002 gcode_claim_action : 4\nM1002 set_filament_type:UNKNOWN\nM400\nT[initial_no_support_extruder]\nM400\nM628 S0\nM629\nM400\nM1002 seLine truncated
|
||||
"machine_end_gcode": ";===== date: 2024/12/19 =====================\n;===== H2D =====================\nG392 S0 ;turn off nozzle clog detect\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n{if timelapse_type == 2}\nM991 S0 P-1 ;end timelapse immediately\n{endif}\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\n\nG90\nG150.3\n\n{if timelapse_type == 1}\nM991 S0 P-1 ;end timelapse at safe pos\n{endif}\n\nM141 S0 ; turn off chamber heating\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n; pull back filament to AMS\nM620 S65535\nT65535\nG150.2\nM621 S65535\n\nM620 S65279\nT65279\nG150.2\nM621 S65279\n\nG150.3\n\nM104 S0 T0; turn off hotend\nM104 S0 T1; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 320}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z320 F600\n G1 Z320\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.4 S0 K0 ;disable air printing detect\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L99 C48 D10 M99 E48 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L99 C60 D10 M99 E60 F10 N99 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\n",
|
||||
"layer_change_gcode": ";======== H2D 20250101========\n; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n",
|
||||
"layer_change_gcode": ";======== H2D 20250414========\n; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n\n{if !spiral_mode && print_sequence != \"by object\" && filament_type[initial_no_support_extruder] != \"TPU\"}\n M622.1 S0 ; for previous firmware, default turn off\n M1002 set_flag g39_forced_detection_flag=1\n M1002 judge_flag g39_forced_detection_flag\n M622 J1\n {if layer_num == 3}\n M993 A2 B2 C2 ; nozzle cam detection allow status save.\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n \n G39 R{-retraction_length} E{retraction_length} M30 N{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053}\n G130 O0 X285 Y-0.5 Z0.8 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053} L10 E2 D0\n M83\n G1 E{-retraction_length} F1800\n G3 Z{layer_z + 0.4} I1.217 J0 P1 F60000\n \n M993 A3 B3 C3 ; nozzle cam detection allow status restore.\n {elsif layer_z == 2}\n M993 A2 B2 C2 ; nozzle cam detection allow status save.\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n \n G39 R{-retraction_length} E{retraction_length} M30 N{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053}\n G130 O0 X290 Y-0.5 Z0.8 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053} L10 E2 D0\n M83\n G1 E{-retraction_length} F1800\n G3 Z{layer_z + 0.4} I1.217 J0 P1 F60000\n \n M993 A3 B3 C3 ; nozzle cam detection allow status restore.\n {elsif layer_z == 4}\n M993 A2 B2 C2 ; nozzle cam detection allow status save.\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n \n G39 R{-retraction_length} E{retraction_length} M30 N{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053}\n G130 O0 X295 Y-0.5 Z0.8 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053} L10 E2 D0\n M83\n G1 E{-retraction_length} F1800\n G3 Z{layer_z + 0.4} I1.217 J0 P1 F60000\n \n M993 A3 B3 C3 ; nozzle cam detection allow status restore.\n {endif}\n M623\n{endif}\n",
|
||||
"time_lapse_gcode": ";======== H2D 20250213========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firware, default turned on\n\nM1002 judge_flag timelapse_record_flag\n\nM622 J1\nM993 A2 B2 C2\nM993 A0 B0 C0\n\n{if !spiral_mode }\nM9712 E{most_used_physical_extruder_id} M{timelapse_type}\nM83\nG1 Z{max_layer_z + 0.4} F1200\nM400\nM9713\n{endif}\n\nM9711 M{timelapse_type} E{most_used_physical_extruder_id} Z{layer_z} S11 C10 O0 T3000\n\n{if !spiral_mode }\nM9712 E{most_used_physical_extruder_id} M{timelapse_type}\nG90\nG1 Z{max_layer_z + 3.0} F1200\nG1 Y295 F30000\nG1 Y265 F18000\nM83\nM9713\n{endif}\nM993 A3 B3 C3\n\nM623\n; SKIPPABLE_END\n",
|
||||
"change_filament_gcode": ";======== H2D ========\n;===== 20250206 =====\nM993 A2 B2 C2 ; nozzle cam detection allow status save.\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n{if (filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PETG\")\n || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG-CF\")\n || (filament_type[next_extruder] == \"PA-CF\") || (filament_type[next_extruder] == \"PET-CF\")}\nM1015.4 S1 K0 ;disable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\n{if (filament_type[next_extruder] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\nM620 S[next_extruder]A\nM1002 gcode_claim_action : 4\nM204 S9000\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\nM620.10 A0 F{filament_max_volumetric_speed[current_extruder]/2.4053*60} L[flush_length] H{nozzle_diameter[current_extruder]} T{nozzle_temperature_range_high[current_extruder]} P{nozzle_temperature[current_extruder]} S1\nM620.10 A1 F{filament_max_volumetric_speed[next_extruder]/2.4053*60} L[flush_length] H{nozzle_diameter[next_extruder]} T{nozzle_temperature_range_high[next_extruder]} P{nozzle_temperature[next_extruder]} S1\n\n{if filament_type[current_extruder] == \"TPU\"}\nM620.11 S0 L0 I[current_extruder] E-{retraction_distances_when_cut[current_extruder]} F{max((filament_max_volumetric_speed[current_extruder]/2.4053*60), 200)}\n{else}\n{if filament_type[current_extruder] == \"PA\"}\nM620.11 S1 L0 I[current_extruder] R4 D2 E-{retraction_distances_when_cut[current_extruder]} F{max((filament_max_volumetric_speed[current_extruder]/2.4053*60), 200)}\n{else}\nM620.11 S1 L0 I[current_extruder] R10 D8 E-{retraction_distances_when_cut[current_extruder]} F{max((filament_max_volumetric_speed[current_extruder]/2.4053*60), 200)}\n{endif}\n{endif}\n\n{if filament_type[current_extruder] == \"TPU\" || filament_type[next_extruder] == \"TPU\"}\nM620.11 H2 C331\n{else}\nM620.11 H0\n{endif}\n\nT[next_extruder]\n\n;deretract\n{if filament_type[next_extruder] == \"TPU\"}\n{else}\n{if filament_type[next_extruder] == \"PA\"}\n;VG1 E1 F{max(new_filament_e_feedrate, 200)}\n;VG1 E1 F{max(new_filament_e_feedrate/2, 100)}\n{else}\n;VG1 E4 F{max(new_filament_e_feedrate, 200)}\n;VG1 E4 F{max(new_filament_e_feedrate/2, 100)}\n{endif}\n{endif}\n\n; VFLUSH_START\n\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\n\nSYNC T{ceil(flush_length / 125) * 5}\n\n; VFLUSH_END\n\nM400\nM83\n{if next_extruder < 255}\n\nM628 S0\n;VM109 S[new_filament_temp]\n\nM629\nM400\n\nM983.3 F{filament_max_volumetric_speed[next_extruder]/2.4} A0.4\n\nM400\n{if wipe_avoid_perimeter}\nG1 Y320 F30000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG1 Y295 F30000\nG1 Y265 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n\nM993 A3 B3 C3 ; nozzle cam detection allow status restore.\n\n{if (filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PETG\")\n || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG-CF\")\n || (filament_type[next_extruder] == \"PA-CF\") || (filament_type[next_extruder] == \"PET-CF\")}\nM1015.4 S1 K1 H[nozzle_diameter] ;enable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620.6 I[next_extruder] W1 ;enable ams air printing detect\nM1002 gcode_claim_action : 0"
|
||||
}
|
||||
Reference in new issue
Block a user