Minor changes to Ender-3 V3 KE

resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json

@@ -119,8 +119,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @Ender-3V3-all"
 	],
-	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set bed temp\nG28 X Y ;Home XY axes\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM104 S[nozzle_temperature_initial_layer] ;Set nozzle temp\nG28 Z ;Home Z axis & load bed mesh\n\nG92 E0 ;Reset Extruder\nG1 X-2.0 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X-2.0 Y145.0 Z0.2 F1500.0 E15 ;Draw the first line\nG1 X-1.7 Y145.0 Z0.2 F5000.0 ;Move to side a little\nG1 X-1.7 Y30 Z0.2 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder",
-	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z20 ;Raise Z more\nG90 ;Absolute positionning\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM140 S[bed_temperature_initial_layer_single] ;Set bed temp\nG28 X Y ;Home XY axes\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM104 S[nozzle_temperature_initial_layer] ;Set nozzle temp\nG28 Z ;Home Z axis & load bed mesh\nG92 E0 ;Reset Extruder\nG1 X-2.0 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X-2.0 Y145.0 Z0.2 F1500.0 E15 ;Draw the first line\nG1 X-1.7 Y145.0 Z0.2 F5000.0 ;Move to side a little\nG1 X-1.7 Y30 Z0.2 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder",
+	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z20 ;Raise Z more\nG90 ;Absolute positionning\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"scan_first_layer": "0",
 	"thumbnails": [
 		"96x96",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json

@@ -23,7 +23,7 @@
 	"top_surface_acceleration": "5000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "1",
 	"outer_wall_line_width": "0.42",
 	"wall_infill_order": "inner wall/outer wall/infill",
@@ -103,7 +103,7 @@
 	"enable_prime_tower": "0",
 	"wipe_tower_no_sparse_layers": "0",
 	"prime_tower_width": "60",
-	"xy_hole_compensation": "0.1",
+	"xy_hole_compensation": "0",
 	"xy_contour_compensation": "0",
 	"default_jerk": "7",
 	"outer_wall_jerk": "7",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json

@@ -23,7 +23,7 @@
 	"top_surface_acceleration": "5000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "1",
 	"outer_wall_line_width": "0.42",
 	"wall_infill_order": "inner wall/outer wall/infill",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json

@@ -23,7 +23,7 @@
 	"top_surface_acceleration": "5000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "1",
 	"outer_wall_line_width": "0.42",
 	"wall_infill_order": "inner wall/outer wall/infill",
@@ -103,7 +103,7 @@
 	"enable_prime_tower": "0",
 	"wipe_tower_no_sparse_layers": "0",
 	"prime_tower_width": "60",
-	"xy_hole_compensation": "0.1",
+	"xy_hole_compensation": "0",
 	"xy_contour_compensation": "0",
 	"default_jerk": "7",
 	"outer_wall_jerk": "7",

resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json

@@ -23,7 +23,7 @@
 	"top_surface_acceleration": "5000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation": "0",
 	"enable_arc_fitting": "1",
 	"outer_wall_line_width": "0.42",
 	"wall_infill_order": "inner wall/outer wall/infill",
@@ -103,7 +103,7 @@
 	"enable_prime_tower": "0",
 	"wipe_tower_no_sparse_layers": "0",
 	"prime_tower_width": "60",
-	"xy_hole_compensation": "0.1",
+	"xy_hole_compensation": "0",
 	"xy_contour_compensation": "0",
 	"default_jerk": "7",
 	"outer_wall_jerk": "7",