FIX: modify the wipe tower parameters

jira: none
Change-Id: I9b18166b83df71ace1585944741dffd18de42bbc
(cherry picked from commit 8df768a4479498fdfa82b227ce489006a09432ea)

resources/profiles/BBL/process/0.06mm Fine @BBL A1M 0.2 nozzle.json

@@ -9,7 +9,6 @@
     "default_acceleration": "6000",
     "initial_layer_speed": "16",
     "initial_layer_infill_speed": "28",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.2 nozzle"

resources/profiles/BBL/process/0.06mm High Quality @BBL A1M 0.2 nozzle.json

@@ -11,7 +11,6 @@
     "initial_layer_infill_speed": "28",
     "outer_wall_speed": "60",
     "outer_wall_acceleration": "2000",
-    "prime_tower_width": "40",
     "sparse_infill_pattern": "gyroid",
     "travel_speed": "700",
     "compatible_printers": [

resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.4 nozzle"

resources/profiles/BBL/process/0.08mm High Quality @BBL A1M 0.2 nozzle.json

@@ -11,7 +11,6 @@
     "initial_layer_infill_speed": "28",
     "outer_wall_speed": "60",
     "outer_wall_acceleration": "2000",
-    "prime_tower_width": "40",
     "sparse_infill_pattern": "gyroid",
     "travel_speed": "700",
     "compatible_printers": [

resources/profiles/BBL/process/0.08mm High Quality @BBL A1M.json

@@ -13,7 +13,6 @@
     "internal_solid_infill_speed": "150",
     "outer_wall_speed": "60",
     "outer_wall_acceleration": "2000",
-    "prime_tower_width": "40",
     "sparse_infill_pattern": "gyroid",
     "sparse_infill_speed": "150",
     "top_surface_speed": "150",

resources/profiles/BBL/process/0.08mm Optimal @BBL A1M 0.2 nozzle.json

@@ -9,7 +9,6 @@
     "default_acceleration": "6000",
     "initial_layer_speed": "16",
     "initial_layer_infill_speed": "28",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.2 nozzle"

resources/profiles/BBL/process/0.10mm High Quality @BBL A1M 0.2 nozzle.json

@@ -12,7 +12,6 @@
     "initial_layer_infill_speed": "28",
     "outer_wall_speed": "60",
     "outer_wall_acceleration": "2000",
-    "prime_tower_width": "40",
     "sparse_infill_pattern": "gyroid",
     "travel_speed": "700",
     "compatible_printers": [

resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json

@@ -10,7 +10,6 @@
     "elefant_foot_compensation": "0",
     "initial_layer_speed": "16",
     "initial_layer_infill_speed": "28",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.2 nozzle"

resources/profiles/BBL/process/0.10mm Standard @BBL H2D 0.2 nozzle.json

@@ -8,8 +8,6 @@
     "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
     "default_acceleration": "8000",
     "initial_layer_speed": "40",
-    "prime_tower_brim_width": "8",
-    "prime_tower_outer_first": "1",
     "prime_tower_width": "60",
     "travel_speed": "1000",
     "compatible_printers": [

resources/profiles/BBL/process/0.12mm Draft @BBL A1M 0.2 nozzle.json

@@ -9,7 +9,6 @@
     "default_acceleration": "6000",
     "initial_layer_speed": "16",
     "initial_layer_infill_speed": "28",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.2 nozzle"

resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.4 nozzle"

resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1M 0.2 nozzle.json

@@ -9,7 +9,6 @@
     "default_acceleration": "6000",
     "initial_layer_speed": "16",
     "initial_layer_infill_speed": "28",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.2 nozzle"

resources/profiles/BBL/process/0.16mm High Quality @BBL A1M.json

@@ -13,7 +13,6 @@
     "internal_solid_infill_speed": "200",
     "outer_wall_speed": "60",
     "outer_wall_acceleration": "2000",
-    "prime_tower_width": "40",
     "sparse_infill_pattern": "gyroid",
     "sparse_infill_speed": "200",
     "top_surface_speed": "150",

resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.4 nozzle"

resources/profiles/BBL/process/0.18mm Fine @BBL A1M 0.6 nozzle.json

@@ -7,7 +7,6 @@
     "instantiation": "true",
     "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
     "default_acceleration": "6000",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.6 nozzle"

resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json

@@ -8,7 +8,6 @@
     "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.4 nozzle"

resources/profiles/BBL/process/0.20mm Standard @BBL H2D.json

@@ -10,8 +10,6 @@
     "initial_layer_speed": "50",
     "internal_solid_infill_speed": "250",
     "outer_wall_speed": "200",
-    "prime_tower_brim_width": "8",
-    "prime_tower_outer_first": "1",
     "prime_tower_width": "60",
     "sparse_infill_speed": "350",
     "travel_speed": "1000",

resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.4 nozzle"

resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.4 nozzle"

resources/profiles/BBL/process/0.24mm Fine @BBL A1M 0.8 nozzle.json

@@ -7,7 +7,6 @@
     "instantiation": "true",
     "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
     "default_acceleration": "6000",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.8 nozzle"

resources/profiles/BBL/process/0.24mm Optimal @BBL A1M 0.6 nozzle.json

@@ -7,7 +7,6 @@
     "instantiation": "true",
     "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
     "default_acceleration": "6000",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.6 nozzle"

resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json

@@ -8,7 +8,6 @@
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.4 nozzle"

resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json

@@ -8,7 +8,6 @@
     "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.6 nozzle"

resources/profiles/BBL/process/0.30mm Standard @BBL H2D 0.6 nozzle.json

@@ -15,8 +15,6 @@
     "internal_solid_infill_speed": "250",
     "outer_wall_speed": "200",
     "overhang_3_4_speed": "30",
-    "prime_tower_brim_width": "8",
-    "prime_tower_outer_first": "1",
     "prime_tower_width": "60",
     "sparse_infill_speed": "350",
     "top_surface_speed": "200",

resources/profiles/BBL/process/0.30mm Strength @BBL A1M 0.6 nozzle.json

@@ -7,7 +7,6 @@
     "instantiation": "true",
     "description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
     "default_acceleration": "6000",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.6 nozzle"

resources/profiles/BBL/process/0.32mm Optimal @BBL A1M 0.8 nozzle.json

@@ -7,7 +7,6 @@
     "instantiation": "true",
     "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
     "default_acceleration": "6000",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.8 nozzle"

resources/profiles/BBL/process/0.36mm Draft @BBL A1M 0.6 nozzle.json

@@ -7,7 +7,6 @@
     "instantiation": "true",
     "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
     "default_acceleration": "6000",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.6 nozzle"

resources/profiles/BBL/process/0.40mm Standard @BBL A1M 0.8 nozzle.json

@@ -8,7 +8,6 @@
     "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.8 nozzle"

resources/profiles/BBL/process/0.40mm Standard @BBL H2D 0.8 nozzle.json

@@ -16,8 +16,6 @@
     "outer_wall_speed": "200",
     "overhang_3_4_speed": "30",
     "overhang_4_4_speed": "10",
-    "prime_tower_brim_width": "8",
-    "prime_tower_outer_first": "1",
     "prime_tower_width": "60",
     "sparse_infill_speed": "350",
     "top_surface_speed": "200",

resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1M 0.6 nozzle.json

@@ -7,7 +7,6 @@
     "instantiation": "true",
     "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
     "default_acceleration": "6000",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.6 nozzle"

resources/profiles/BBL/process/0.48mm Draft @BBL A1M 0.8 nozzle.json

@@ -7,7 +7,6 @@
     "instantiation": "true",
     "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
     "default_acceleration": "6000",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.8 nozzle"

resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1M 0.8 nozzle.json

@@ -7,7 +7,6 @@
     "instantiation": "true",
     "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.",
     "default_acceleration": "6000",
-    "prime_tower_width": "40",
     "travel_speed": "700",
     "compatible_printers": [
         "Bambu Lab A1 mini 0.8 nozzle"

resources/profiles/BBL/process/fdm_process_common.json

@@ -49,11 +49,10 @@
     "outer_wall_line_width": "0.42",
     "outer_wall_speed": "120",
     "overhang_totally_speed": "10",
-    "prime_tower_width": "50",
+    "prime_tower_width": "35",
     "print_sequence": "by layer",
     "print_settings_id": "",
-    "prime_tower_brim_width": "5",
+    "prime_tower_brim_width": "3",
-    "prime_tower_outer_first": "0",
     "raft_layers": "0",
     "reduce_crossing_wall": "0",
     "reduce_infill_retraction": "1",