diff --git a/resources/profiles/BBL/process/0.06mm Fine @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Fine @BBL A1M 0.2 nozzle.json index 3262e70ef8..73a7137659 100644 --- a/resources/profiles/BBL/process/0.06mm Fine @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm Fine @BBL A1M 0.2 nozzle.json @@ -9,7 +9,6 @@ "default_acceleration": "6000", "initial_layer_speed": "16", "initial_layer_infill_speed": "28", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/process/0.06mm High Quality @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm High Quality @BBL A1M 0.2 nozzle.json index 133ad995d3..13f5192536 100644 --- a/resources/profiles/BBL/process/0.06mm High Quality @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm High Quality @BBL A1M 0.2 nozzle.json @@ -11,7 +11,6 @@ "initial_layer_infill_speed": "28", "outer_wall_speed": "60", "outer_wall_acceleration": "2000", - "prime_tower_width": "40", "sparse_infill_pattern": "gyroid", "travel_speed": "700", "compatible_printers": [ diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json index 1ed5b87b3f..cb8b2ee21f 100644 --- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json @@ -8,7 +8,6 @@ "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.", "default_acceleration": "6000", "elefant_foot_compensation": "0", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M 0.2 nozzle.json index f6ab9b3141..1906473e8d 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M 0.2 nozzle.json @@ -11,7 +11,6 @@ "initial_layer_infill_speed": "28", "outer_wall_speed": "60", "outer_wall_acceleration": "2000", - "prime_tower_width": "40", "sparse_infill_pattern": "gyroid", "travel_speed": "700", "compatible_printers": [ diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M.json index a883e8f058..22b287387a 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M.json @@ -13,7 +13,6 @@ "internal_solid_infill_speed": "150", "outer_wall_speed": "60", "outer_wall_acceleration": "2000", - "prime_tower_width": "40", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "150", "top_surface_speed": "150", diff --git a/resources/profiles/BBL/process/0.08mm Optimal @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Optimal @BBL A1M 0.2 nozzle.json index b51178b9e3..cfc379e24c 100644 --- a/resources/profiles/BBL/process/0.08mm Optimal @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm Optimal @BBL A1M 0.2 nozzle.json @@ -9,7 +9,6 @@ "default_acceleration": "6000", "initial_layer_speed": "16", "initial_layer_infill_speed": "28", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/process/0.10mm High Quality @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm High Quality @BBL A1M 0.2 nozzle.json index aa05899d55..1ed2d5fc6a 100644 --- a/resources/profiles/BBL/process/0.10mm High Quality @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm High Quality @BBL A1M 0.2 nozzle.json @@ -12,7 +12,6 @@ "initial_layer_infill_speed": "28", "outer_wall_speed": "60", "outer_wall_acceleration": "2000", - "prime_tower_width": "40", "sparse_infill_pattern": "gyroid", "travel_speed": "700", "compatible_printers": [ diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json index e04e679aea..2a727c85c6 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json @@ -10,7 +10,6 @@ "elefant_foot_compensation": "0", "initial_layer_speed": "16", "initial_layer_infill_speed": "28", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL H2D 0.2 nozzle.json index d613f4d78f..355d88d6d1 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL H2D 0.2 nozzle.json @@ -8,8 +8,6 @@ "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", "default_acceleration": "8000", "initial_layer_speed": "40", - "prime_tower_brim_width": "8", - "prime_tower_outer_first": "1", "prime_tower_width": "60", "travel_speed": "1000", "compatible_printers": [ diff --git a/resources/profiles/BBL/process/0.12mm Draft @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Draft @BBL A1M 0.2 nozzle.json index 145f060e83..3074a31ec4 100644 --- a/resources/profiles/BBL/process/0.12mm Draft @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Draft @BBL A1M 0.2 nozzle.json @@ -9,7 +9,6 @@ "default_acceleration": "6000", "initial_layer_speed": "16", "initial_layer_infill_speed": "28", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json b/resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json index cb2749b77a..d0894a61d3 100644 --- a/resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json @@ -8,7 +8,6 @@ "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.", "default_acceleration": "6000", "elefant_foot_compensation": "0", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle" diff --git a/resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1M 0.2 nozzle.json index 92ced0d14e..3ee6d163dc 100644 --- a/resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1M 0.2 nozzle.json @@ -9,7 +9,6 @@ "default_acceleration": "6000", "initial_layer_speed": "16", "initial_layer_infill_speed": "28", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL A1M.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL A1M.json index 620ef53f5a..49f14feac7 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL A1M.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL A1M.json @@ -13,7 +13,6 @@ "internal_solid_infill_speed": "200", "outer_wall_speed": "60", "outer_wall_acceleration": "2000", - "prime_tower_width": "40", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "200", "top_surface_speed": "150", diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json index da0f2bf775..10778bcc73 100644 --- a/resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json +++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json @@ -8,7 +8,6 @@ "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", "default_acceleration": "6000", "elefant_foot_compensation": "0", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle" diff --git a/resources/profiles/BBL/process/0.18mm Fine @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Fine @BBL A1M 0.6 nozzle.json index 299314d050..c7ca32e214 100644 --- a/resources/profiles/BBL/process/0.18mm Fine @BBL A1M 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Fine @BBL A1M 0.6 nozzle.json @@ -7,7 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", "default_acceleration": "6000", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.6 nozzle" diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json b/resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json index 18907a9993..78b09fc677 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json @@ -8,7 +8,6 @@ "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", "default_acceleration": "6000", "elefant_foot_compensation": "0", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle" diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL H2D.json b/resources/profiles/BBL/process/0.20mm Standard @BBL H2D.json index 01869faf1c..21c8679f54 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL H2D.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL H2D.json @@ -10,8 +10,6 @@ "initial_layer_speed": "50", "internal_solid_infill_speed": "250", "outer_wall_speed": "200", - "prime_tower_brim_width": "8", - "prime_tower_outer_first": "1", "prime_tower_width": "60", "sparse_infill_speed": "350", "travel_speed": "1000", diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json b/resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json index 7f3e7653af..3a261d636d 100644 --- a/resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json +++ b/resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json @@ -8,7 +8,6 @@ "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", "default_acceleration": "6000", "elefant_foot_compensation": "0", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle" diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json b/resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json index c9cec9e103..82a34774fb 100644 --- a/resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json +++ b/resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json @@ -8,7 +8,6 @@ "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.", "default_acceleration": "6000", "elefant_foot_compensation": "0", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle" diff --git a/resources/profiles/BBL/process/0.24mm Fine @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Fine @BBL A1M 0.8 nozzle.json index 1a6dbad2df..4187b5e97d 100644 --- a/resources/profiles/BBL/process/0.24mm Fine @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Fine @BBL A1M 0.8 nozzle.json @@ -7,7 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "default_acceleration": "6000", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.8 nozzle" diff --git a/resources/profiles/BBL/process/0.24mm Optimal @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Optimal @BBL A1M 0.6 nozzle.json index c96731be6e..eff76ccaeb 100644 --- a/resources/profiles/BBL/process/0.24mm Optimal @BBL A1M 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Optimal @BBL A1M 0.6 nozzle.json @@ -7,7 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "default_acceleration": "6000", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.6 nozzle" diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json index 8c5e3d0e41..a0c3058a71 100644 --- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json +++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json @@ -8,7 +8,6 @@ "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.", "default_acceleration": "6000", "elefant_foot_compensation": "0", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle" diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json index a84258aaa1..910c119ebd 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json @@ -8,7 +8,6 @@ "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", "default_acceleration": "6000", "elefant_foot_compensation": "0", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.6 nozzle" diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL H2D 0.6 nozzle.json index 1868163439..df24c0f134 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL H2D 0.6 nozzle.json @@ -15,8 +15,6 @@ "internal_solid_infill_speed": "250", "outer_wall_speed": "200", "overhang_3_4_speed": "30", - "prime_tower_brim_width": "8", - "prime_tower_outer_first": "1", "prime_tower_width": "60", "sparse_infill_speed": "350", "top_surface_speed": "200", diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL A1M 0.6 nozzle.json index d802d60b0a..e5c6026fb5 100644 --- a/resources/profiles/BBL/process/0.30mm Strength @BBL A1M 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Strength @BBL A1M 0.6 nozzle.json @@ -7,7 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", "default_acceleration": "6000", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.6 nozzle" diff --git a/resources/profiles/BBL/process/0.32mm Optimal @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Optimal @BBL A1M 0.8 nozzle.json index 300bdc394c..41209c609d 100644 --- a/resources/profiles/BBL/process/0.32mm Optimal @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Optimal @BBL A1M 0.8 nozzle.json @@ -7,7 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "default_acceleration": "6000", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.8 nozzle" diff --git a/resources/profiles/BBL/process/0.36mm Draft @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Draft @BBL A1M 0.6 nozzle.json index 286fdbfc43..835655d831 100644 --- a/resources/profiles/BBL/process/0.36mm Draft @BBL A1M 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.36mm Draft @BBL A1M 0.6 nozzle.json @@ -7,7 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", "default_acceleration": "6000", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.6 nozzle" diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL A1M 0.8 nozzle.json index 56b5faccb5..e4a2b2aaa1 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL A1M 0.8 nozzle.json @@ -8,7 +8,6 @@ "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", "default_acceleration": "6000", "elefant_foot_compensation": "0", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.8 nozzle" diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL H2D 0.8 nozzle.json index 3a9af3b29c..a9dd7e9883 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL H2D 0.8 nozzle.json @@ -16,8 +16,6 @@ "outer_wall_speed": "200", "overhang_3_4_speed": "30", "overhang_4_4_speed": "10", - "prime_tower_brim_width": "8", - "prime_tower_outer_first": "1", "prime_tower_width": "60", "sparse_infill_speed": "350", "top_surface_speed": "200", diff --git a/resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1M 0.6 nozzle.json index 8ee5aef343..e13b0b7e7a 100644 --- a/resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1M 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1M 0.6 nozzle.json @@ -7,7 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "default_acceleration": "6000", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.6 nozzle" diff --git a/resources/profiles/BBL/process/0.48mm Draft @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Draft @BBL A1M 0.8 nozzle.json index 1451ad55d7..7c619a104c 100644 --- a/resources/profiles/BBL/process/0.48mm Draft @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.48mm Draft @BBL A1M 0.8 nozzle.json @@ -7,7 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "default_acceleration": "6000", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.8 nozzle" diff --git a/resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1M 0.8 nozzle.json index f796ae365d..e4719a71d6 100644 --- a/resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1M 0.8 nozzle.json @@ -7,7 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.", "default_acceleration": "6000", - "prime_tower_width": "40", "travel_speed": "700", "compatible_printers": [ "Bambu Lab A1 mini 0.8 nozzle" diff --git a/resources/profiles/BBL/process/fdm_process_common.json b/resources/profiles/BBL/process/fdm_process_common.json index 392e84e588..3bb0145f86 100644 --- a/resources/profiles/BBL/process/fdm_process_common.json +++ b/resources/profiles/BBL/process/fdm_process_common.json @@ -49,11 +49,10 @@ "outer_wall_line_width": "0.42", "outer_wall_speed": "120", "overhang_totally_speed": "10", - "prime_tower_width": "50", + "prime_tower_width": "35", "print_sequence": "by layer", "print_settings_id": "", - "prime_tower_brim_width": "5", - "prime_tower_outer_first": "0", + "prime_tower_brim_width": "3", "raft_layers": "0", "reduce_crossing_wall": "0", "reduce_infill_retraction": "1",