Preview: reuse a belt print's toolpaths until the view is toggled

load_as_gcode() skips the conversion and GPU upload when it is handed the
result it already shows, but belt printers were exempt from that cache,
because the designed/raw view changes the toolpath geometry for the same
result. So every preview reload of a belt print, switching back to the
Preview tab for one, converted and uploaded every toolpath again.

Remember the view the result was converted for and reuse it while both
match. Toggling the view (B, the legend checkbox, the toolbar menu) still
converts again. The print config the back-transform reads cannot change
without a new G-code result, so the result id covers it as it does on any
other printer.

Suggested by raistlin7447 on #14394.

src/slic3r/GUI/GCodeViewer.cpp

@@ -1390,11 +1390,11 @@ void GCodeViewer::load_as_gcode(const GCodeProcessorResult& gcode_result, const
     m_viewer.set_dim_previous_layers_brightness(0.01f * std::stoi(get_app_config()->get("preview_dim_previous_layers_brightness")));
 
     // avoid processing if called with the same gcode_result.
-    // Belt printers are exempt: the toolpath geometry fed to libvgcode depends on
-    // the current designed/raw view state (back-transform applied in convert), so
-    // re-running the conversion is required for the upright view and for toggling
-    // it (hotkey B) to take effect even when the G-code itself is unchanged.
-    if (m_last_result_id == gcode_result.id && wxGetApp().is_editor() && !print.config().belt_printer.value) {
+    // On a belt printer the toolpath geometry fed to libvgcode also depends on the
+    // designed/raw view state (the back-transform is applied in convert), so the
+    // same result is converted again only when that view has been toggled.
+    const bool same_belt_view = !print.config().belt_printer.value || m_last_belt_show_designed == m_belt_show_designed;
+    if (m_last_result_id == gcode_result.id && wxGetApp().is_editor() && same_belt_view) {
         //BBS: add logs
         BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(": the same id %1%, return directly, result %2% ") % m_last_result_id % (&gcode_result);
 
@@ -1688,6 +1688,7 @@ void GCodeViewer::load_as_gcode(const GCodeProcessorResult& gcode_result, const
 
     //BBS: move the id to the end of reset
     m_last_result_id = gcode_result.id;
+    m_last_belt_show_designed = m_belt_show_designed;
     m_gcode_result = &gcode_result;
     m_move_type_counts.fill(0);
     for (auto& move_type_times : m_move_type_times)

src/slic3r/GUI/GCodeViewer.hpp

@@ -199,6 +199,8 @@ private:
     std::vector<int> m_plater_extruder;
     bool m_gl_data_initialized{ false };
     unsigned int m_last_result_id{ 0 };
+    // Belt printers: the view the loaded result was converted for (see load_as_gcode).
+    bool m_last_belt_show_designed{ true };
     //BBS: save m_gcode_result as well
     const GCodeProcessorResult* m_gcode_result;
     std::array<unsigned int, static_cast<size_t>(EMoveType::Count)> m_move_type_counts{};

src/slic3r/GUI/GUI_Preview.cpp

@@ -373,7 +373,7 @@ void Preview::refresh_belt_view()
 {
     // Re-run the G-code preview conversion so the belt "designed view" toggle takes effect
     // (the back-transform is baked into the toolpath geometry in GCodeViewer::load_as_gcode,
-    // and belt printers are exempt from the same-result-id load cache so the re-convert runs).
+    // whose same-result cache also keys on the view state, so the re-convert runs).
     // Reset m_loaded_print to bypass the "already loaded" guard the way reload_print does, but
     // keep the current layer (Z) range and only-gcode mode so the view doesn't jump on toggle.
     m_loaded_print = nullptr;