mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-20 03:43:52 +00:00
Sync with latest bbl profiles
This commit is contained in:
Noisyfox
@@ -6,11 +6,19 @@
|
||||
"setting_id": "GP084",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"travel_speed": "700",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,10 +6,18 @@
|
||||
"setting_id": "GP050",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"initial_layer_speed": "16",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP063",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": "5000",
|
||||
"default_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"outer_wall_acceleration": [
|
||||
"2500"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,14 +6,26 @@
|
||||
"setting_id": "GP118",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,13 +6,25 @@
|
||||
"setting_id": "GP117",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_speed": "16",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,10 +6,16 @@
|
||||
"setting_id": "GP116",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
|
||||
@@ -6,10 +6,16 @@
|
||||
"setting_id": "GP115",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"compatible_printers": [
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP076",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP049",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,14 +6,26 @@
|
||||
"setting_id": "GP119",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,17 +6,35 @@
|
||||
"setting_id": "GP102",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"gap_infill_speed": "210",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"gap_infill_speed": [
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "150",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"sparse_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,13 +6,25 @@
|
||||
"setting_id": "GP120",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_speed": "16",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,17 +6,35 @@
|
||||
"setting_id": "GP101",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "3000",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": "210",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"gap_infill_speed": [
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "150",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"sparse_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -52,7 +52,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -76,7 +76,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -6,10 +6,16 @@
|
||||
"setting_id": "GP121",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
|
||||
@@ -6,16 +6,31 @@
|
||||
"setting_id": "GP100",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"gap_infill_speed": "210",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "150",
|
||||
"top_surface_speed": "150",
|
||||
"sparse_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,10 +6,16 @@
|
||||
"setting_id": "GP122",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"compatible_printers": [
|
||||
|
||||
@@ -6,16 +6,32 @@
|
||||
"setting_id": "GP099",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "210",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "150",
|
||||
"sparse_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"top_surface_speed": "150",
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
|
||||
@@ -6,11 +6,19 @@
|
||||
"setting_id": "GP085",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"travel_speed": "700",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,10 +6,18 @@
|
||||
"setting_id": "GP051",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"initial_layer_speed": "16",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP064",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": "5000",
|
||||
"default_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"outer_wall_acceleration": [
|
||||
"2500"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,14 +6,26 @@
|
||||
"setting_id": "GP114",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,14 +6,25 @@
|
||||
"setting_id": "GP113",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"default_acceleration": "3000",
|
||||
"elefant_foot_compensation": "0",
|
||||
"initial_layer_speed": "16",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,10 +6,16 @@
|
||||
"setting_id": "GP112",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
|
||||
@@ -6,10 +6,16 @@
|
||||
"setting_id": "GP111",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"compatible_printers": [
|
||||
|
||||
@@ -6,11 +6,19 @@
|
||||
"setting_id": "GP083",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"travel_speed": "700",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,11 +6,19 @@
|
||||
"setting_id": "GP039",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"initial_layer_speed": "16",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"travel_speed": "700",
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -5,11 +5,26 @@
|
||||
"from": "system",
|
||||
"setting_id": "GP123",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "8000",
|
||||
"initial_layer_speed": "40",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"travel_speed": "1000",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -15,7 +15,10 @@
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -51,7 +51,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -6,11 +6,19 @@
|
||||
"setting_id": "GP086",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"travel_speed": "700",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,10 +6,18 @@
|
||||
"setting_id": "GP052",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"initial_layer_speed": "16",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP065",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"default_acceleration": "5000",
|
||||
"default_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"outer_wall_acceleration": [
|
||||
"2500"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP077",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP044",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,25 +6,90 @@
|
||||
"setting_id": "GP142",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_layers": "7",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "50",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"initial_layer_speed": "40",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "100",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100",
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_shell_layers": "9",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_speed": "150",
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,17 +6,35 @@
|
||||
"setting_id": "GP106",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"gap_infill_speed": "230",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"gap_infill_speed": [
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "180",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"sparse_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,17 +6,35 @@
|
||||
"setting_id": "GP105",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "3000",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": "230",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"gap_infill_speed": [
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "180",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"sparse_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -76,7 +76,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -6,15 +6,31 @@
|
||||
"setting_id": "GP104",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "230",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "180",
|
||||
"top_surface_speed": "150",
|
||||
"sparse_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,16 +6,32 @@
|
||||
"setting_id": "GP103",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "230",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "180",
|
||||
"sparse_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"top_surface_speed": "150",
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
|
||||
@@ -6,11 +6,19 @@
|
||||
"setting_id": "GP087",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"travel_speed": "700",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,10 +6,18 @@
|
||||
"setting_id": "GP053",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"initial_layer_speed": "16",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP066",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"default_acceleration": "5000",
|
||||
"default_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"outer_wall_acceleration": [
|
||||
"2500"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,17 +6,35 @@
|
||||
"setting_id": "GP110",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"gap_infill_speed": "250",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"gap_infill_speed": [
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "200",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"sparse_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,17 +6,35 @@
|
||||
"setting_id": "GP109",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "3000",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": "250",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"gap_infill_speed": [
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "200",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"sparse_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -76,7 +76,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -6,15 +6,31 @@
|
||||
"setting_id": "GP108",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "250",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "200",
|
||||
"top_surface_speed": "150",
|
||||
"sparse_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,16 +6,32 @@
|
||||
"setting_id": "GP107",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "250",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "200",
|
||||
"sparse_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"top_surface_speed": "150",
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP078",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP045",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -14,7 +14,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -68,7 +68,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP088",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.6 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,8 +6,12 @@
|
||||
"setting_id": "GP062",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.6 nozzle"
|
||||
]
|
||||
|
||||
@@ -71,7 +71,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP079",
|
||||
"instantiation": "true",
|
||||
"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP000",
|
||||
"instantiation": "true",
|
||||
"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,14 +6,44 @@
|
||||
"setting_id": "GP124",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for 0.4mm nozzle, prioritizing speed.",
|
||||
"default_acceleration": "8000",
|
||||
"initial_layer_speed": "50",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"outer_wall_speed": "200",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"300",
|
||||
"250",
|
||||
"300"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_speed": "350",
|
||||
"travel_speed": "1000",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600",
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -14,7 +14,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -6,11 +6,19 @@
|
||||
"setting_id": "GP080",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_density": "25%",
|
||||
"travel_speed": "700",
|
||||
"skeleton_infill_density": "25%",
|
||||
"skin_infill_density": "25%",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"wall_loops": "6",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP046",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,8 +6,12 @@
|
||||
"setting_id": "GP021",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_density": "25%",
|
||||
"skeleton_infill_density": "25%",
|
||||
"skin_infill_density": "25%",
|
||||
"wall_loops": "6",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP013",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_density": "25%",
|
||||
"skeleton_infill_density": "25%",
|
||||
"skin_infill_density": "25%",
|
||||
"wall_loops": "6",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
|
||||
@@ -68,7 +68,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -72,7 +72,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP081",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP047",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP092",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.8 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,8 +6,12 @@
|
||||
"setting_id": "GP057",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.8 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP089",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.6 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,8 +6,12 @@
|
||||
"setting_id": "GP054",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.6 nozzle"
|
||||
]
|
||||
|
||||
@@ -58,7 +58,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP082",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP048",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP096",
|
||||
"instantiation": "true",
|
||||
"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.6 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP038",
|
||||
"instantiation": "true",
|
||||
"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.6 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,20 +6,80 @@
|
||||
"setting_id": "GP125",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for 0.6mm nozzle, prioritizing speed.",
|
||||
"bridge_speed": "50",
|
||||
"default_acceleration": "8000",
|
||||
"gap_infill_speed": "250",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"initial_layer_speed": "50",
|
||||
"inner_wall_speed": "300",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"outer_wall_speed": "200",
|
||||
"overhang_3_4_speed": "30",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250",
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105",
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300",
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"300",
|
||||
"250",
|
||||
"300"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_speed": "350",
|
||||
"top_surface_speed": "200",
|
||||
"travel_speed": "1000",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600",
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.6 nozzle"
|
||||
]
|
||||
|
||||
@@ -15,7 +15,10 @@
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -6,10 +6,16 @@
|
||||
"setting_id": "GP097",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"sparse_infill_density": "25%",
|
||||
"travel_speed": "700",
|
||||
"skeleton_infill_density": "25%",
|
||||
"skin_infill_density": "25%",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"wall_loops": "4",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.6 nozzle"
|
||||
|
||||
@@ -6,8 +6,12 @@
|
||||
"setting_id": "GP061",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.6 nozzle"
|
||||
]
|
||||
|
||||
@@ -8,6 +8,8 @@
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"sparse_infill_density": "25%",
|
||||
"skeleton_infill_density": "25%",
|
||||
"skin_infill_density": "25%",
|
||||
"wall_loops": "4",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.6 nozzle"
|
||||
|
||||
@@ -8,6 +8,8 @@
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"sparse_infill_density": "25%",
|
||||
"skeleton_infill_density": "25%",
|
||||
"skin_infill_density": "25%",
|
||||
"smooth_coefficient": "150",
|
||||
"wall_loops": "4",
|
||||
"compatible_printers": [
|
||||
|
||||
@@ -72,7 +72,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP093",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.8 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,8 +6,12 @@
|
||||
"setting_id": "GP058",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.8 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP090",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.6 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,8 +6,12 @@
|
||||
"setting_id": "GP055",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.6 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP098",
|
||||
"instantiation": "true",
|
||||
"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.8 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP037",
|
||||
"instantiation": "true",
|
||||
"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.8 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,21 +6,86 @@
|
||||
"setting_id": "GP126",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for 0.8mm nozzle, prioritizing speed.",
|
||||
"bridge_speed": "50",
|
||||
"default_acceleration": "8000",
|
||||
"gap_infill_speed": "250",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"initial_layer_speed": "50",
|
||||
"inner_wall_speed": "300",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"outer_wall_speed": "200",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "10",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250",
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105",
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300",
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"300",
|
||||
"250",
|
||||
"300"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_speed": "350",
|
||||
"top_surface_speed": "200",
|
||||
"travel_speed": "1000",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600",
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.8 nozzle"
|
||||
]
|
||||
|
||||
@@ -15,7 +15,10 @@
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP091",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.6 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,8 +6,12 @@
|
||||
"setting_id": "GP056",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.6 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP094",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.8 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,8 +6,12 @@
|
||||
"setting_id": "GP059",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.8 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP095",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.8 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,8 +6,12 @@
|
||||
"setting_id": "GP060",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.8 nozzle"
|
||||
]
|
||||
|
||||
@@ -5,16 +5,22 @@
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_color_penetration_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bridge_flow": "0.95",
|
||||
"bridge_no_support": "0",
|
||||
"bridge_speed": "25",
|
||||
"bridge_speed": [
|
||||
"25"
|
||||
],
|
||||
"brim_object_gap": "0.1",
|
||||
"brim_width": "5",
|
||||
"compatible_printers_condition": "",
|
||||
"circle_compensation_manual_offset": "0",
|
||||
"default_acceleration": "10000",
|
||||
"default_acceleration": [
|
||||
"10000"
|
||||
],
|
||||
"detect_floating_vertical_shell": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"draft_shield": "disabled",
|
||||
@@ -25,29 +31,41 @@
|
||||
"enable_circle_compensation": "0",
|
||||
"enable_wrapping_detection": "0",
|
||||
"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
|
||||
"gap_infill_speed": "30",
|
||||
"gap_infill_speed": [
|
||||
"30"
|
||||
],
|
||||
"infill_combination": "0",
|
||||
"infill_direction": "45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_speed": [
|
||||
"20"
|
||||
],
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "40",
|
||||
"inner_wall_speed": [
|
||||
"40"
|
||||
],
|
||||
"interface_shells": "0",
|
||||
"internal_bridge_support_thickness": "0.8",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_speed": "40",
|
||||
"internal_solid_infill_speed": [
|
||||
"40"
|
||||
],
|
||||
"ironing_flow": "10%",
|
||||
"ironing_inset": "0.21",
|
||||
"ironing_spacing": "0.15",
|
||||
"ironing_speed": "30",
|
||||
"ironing_type": "no ironing",
|
||||
"infill_lock_depth": "1.0",
|
||||
"initial_layer_travel_acceleration": "6000",
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"infill_shift_step": "0.4",
|
||||
"infill_rotate_step": "0",
|
||||
"layer_height": "0.2",
|
||||
"layer_time_smoothing": "0",
|
||||
"layer_time_smoothing_threshold": "30",
|
||||
"line_width": "0.42",
|
||||
"locked_skin_infill_pattern": "crosszag",
|
||||
"locked_skeleton_infill_pattern": "zigzag",
|
||||
@@ -56,8 +74,12 @@
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"only_one_wall_top": "1",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "120",
|
||||
"overhang_totally_speed": "10",
|
||||
"outer_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10"
|
||||
],
|
||||
"override_filament_scarf_seam_setting": "0",
|
||||
"pre_start_fan_time": [
|
||||
"0"
|
||||
@@ -77,14 +99,22 @@
|
||||
"resolution": "0.012",
|
||||
"scarf_angle_threshold": "155",
|
||||
"seam_position": "aligned",
|
||||
"seam_placement_away_from_overhangs": "0",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"smooth_coefficient": "80",
|
||||
"sparse_infill_density": "15%",
|
||||
"skeleton_infill_density": "15%",
|
||||
"skin_infill_density": "15%",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"skin_infill_line_width": "0.45",
|
||||
"skin_infill_depth": "2.0",
|
||||
"skeleton_infill_line_width": "0.45",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"sparse_infill_speed": "50",
|
||||
"sparse_infill_speed": [
|
||||
"50"
|
||||
],
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"support_base_pattern": "default",
|
||||
@@ -97,27 +127,39 @@
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_speed": [
|
||||
"80"
|
||||
],
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.42",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_speed": "40",
|
||||
"support_speed": [
|
||||
"40"
|
||||
],
|
||||
"support_style": "default",
|
||||
"support_threshold_angle": "30",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_type": "normal(auto)",
|
||||
"support_type": "tree(auto)",
|
||||
"seam_slope_type": "none",
|
||||
"seam_slope_start_height": "10%",
|
||||
"seam_slope_gap": "0",
|
||||
"seam_slope_min_length": "10",
|
||||
"symmetric_infill_y_axis": "0",
|
||||
"top_shell_layers": "3",
|
||||
"top_color_penetration_layers": "3",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "30",
|
||||
"travel_speed": "400",
|
||||
"top_surface_speed": [
|
||||
"30"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"400"
|
||||
],
|
||||
"tree_support_branch_angle": "45",
|
||||
"tree_support_branch_diameter": "2",
|
||||
"tree_support_wall_count": "0",
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user