mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-14 00:52:04 +00:00
Sync with latest bbl profiles
This commit is contained in:
Noisyfox
@@ -16,5 +16,8 @@
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Bambu Lab"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"8"
|
||||
]
|
||||
}
|
||||
@@ -17,6 +17,9 @@
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -23,6 +23,9 @@
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle"
|
||||
|
||||
@@ -17,6 +17,9 @@
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -14,6 +14,9 @@
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -17,6 +17,9 @@
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -17,6 +17,9 @@
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle"
|
||||
|
||||
@@ -32,6 +32,9 @@
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
|
||||
@@ -32,6 +32,9 @@
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
|
||||
@@ -32,6 +32,9 @@
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
|
||||
@@ -32,6 +32,9 @@
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
|
||||
@@ -32,6 +32,9 @@
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
|
||||
@@ -32,6 +32,9 @@
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
|
||||
@@ -6,16 +6,13 @@
|
||||
"setting_id": "GFSG02_09",
|
||||
"instantiation": "true",
|
||||
"counter_coef_2": [
|
||||
"0.0065"
|
||||
"0.007"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.032"
|
||||
"0.003"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.33"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.35"
|
||||
"0.1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
@@ -112,16 +109,13 @@
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
"-0.006"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.135"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"2.2"
|
||||
"0.1"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.88"
|
||||
"0.1"
|
||||
],
|
||||
"long_retractions_when_ec": [
|
||||
"1",
|
||||
|
||||
@@ -17,6 +17,9 @@
|
||||
"filament_retraction_length": [
|
||||
"0.3"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
|
||||
@@ -23,6 +23,9 @@
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
|
||||
@@ -14,6 +14,9 @@
|
||||
"filament_retraction_length": [
|
||||
"0.3"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
|
||||
@@ -17,6 +17,9 @@
|
||||
"filament_retraction_length": [
|
||||
"0.3"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
|
||||
@@ -23,6 +23,9 @@
|
||||
"filament_retraction_length": [
|
||||
"0.2"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
|
||||
@@ -14,6 +14,9 @@
|
||||
"filament_retraction_length": [
|
||||
"0.3"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
|
||||
@@ -29,6 +29,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -26,6 +26,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -29,6 +29,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -26,6 +26,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -29,6 +29,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -26,6 +26,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -29,6 +29,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -26,6 +26,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -24,7 +24,7 @@
|
||||
"5%"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"all"
|
||||
"none"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Bambu Lab"
|
||||
|
||||
@@ -29,6 +29,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -29,6 +29,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -29,6 +29,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -29,6 +29,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -23,6 +23,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
|
||||
@@ -20,6 +20,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
|
||||
@@ -23,6 +23,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
|
||||
@@ -20,6 +20,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
|
||||
@@ -23,6 +23,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -23,6 +23,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -23,6 +23,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -23,6 +23,9 @@
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
|
||||
@@ -93,7 +93,10 @@
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_enable_overhang_speed": "1",
|
||||
"filament_enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -102,7 +102,10 @@
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_enable_overhang_speed": "1",
|
||||
"filament_enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -93,7 +93,10 @@
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_enable_overhang_speed": "1",
|
||||
"filament_enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -102,7 +102,10 @@
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_enable_overhang_speed": "1",
|
||||
"filament_enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -93,7 +93,10 @@
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_enable_overhang_speed": "1",
|
||||
"filament_enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -102,7 +102,10 @@
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_enable_overhang_speed": "1",
|
||||
"filament_enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -93,7 +93,10 @@
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_enable_overhang_speed": "1",
|
||||
"filament_enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -102,7 +102,10 @@
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_enable_overhang_speed": "1",
|
||||
"filament_enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -96,7 +96,10 @@
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_enable_overhang_speed": "1",
|
||||
"filament_enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -41,9 +41,6 @@
|
||||
"filament_vendor": [
|
||||
"Polymaker"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"800"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
@@ -86,6 +83,9 @@
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"800"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
|
||||
@@ -96,6 +96,9 @@
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
@@ -144,6 +147,9 @@
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
@@ -255,6 +261,9 @@
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"filament_velocity_adaptation_factor":[
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
|
||||
@@ -43,6 +43,9 @@
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
@@ -65,5 +68,8 @@
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"",
|
||||
""
|
||||
],
|
||||
"filament_velocity_adaptation_factor":[
|
||||
"1"
|
||||
]
|
||||
}
|
||||
@@ -24,7 +24,12 @@
|
||||
"0x0,325x0,325x320,0x320",
|
||||
"25x0,350x0,350x320,25x320"
|
||||
],
|
||||
"hotend_heating_rate": "3.6",
|
||||
"hotend_heating_rate": [
|
||||
"3.6",
|
||||
"3.6",
|
||||
"3.6",
|
||||
"3.6"
|
||||
],
|
||||
"machine_load_filament_time": "30",
|
||||
"machine_max_speed_e": [
|
||||
"50",
|
||||
|
||||
@@ -5,6 +5,7 @@
|
||||
"url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json",
|
||||
"bed_model": "bbl-3dp-H2D.stl",
|
||||
"bed_texture": "bbl-3dp-logo.svg",
|
||||
"use_rect_grid": "true",
|
||||
"default_bed_type": "Textured PEI Plate",
|
||||
"image_bed_type": "o",
|
||||
"not_support_bed_type": "Smooth Cool Plate;Engineering Plate;Textured Cool Plate;Cool Plate (SuperTack)",
|
||||
|
||||
@@ -21,7 +21,9 @@
|
||||
"Bambu PLA Basic @BBL X1"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @BBL X1C",
|
||||
"enable_long_retraction_when_cut": "2",
|
||||
"enable_long_retraction_when_cut": [
|
||||
"2"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x2"
|
||||
],
|
||||
|
||||
@@ -28,7 +28,9 @@
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"enable_long_retraction_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"extruder_clearance_height_to_lid": "90",
|
||||
"extruder_clearance_max_radius": "68",
|
||||
"extruder_clearance_radius": "57",
|
||||
|
||||
@@ -26,7 +26,9 @@
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"enable_long_retraction_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"extruder_clearance_height_to_lid": "90",
|
||||
"extruder_clearance_height_to_rod": "38.70",
|
||||
"extruder_clearance_max_radius": "92",
|
||||
@@ -60,6 +62,18 @@
|
||||
"0"
|
||||
],
|
||||
"head_wrap_detect_zone": [],
|
||||
"hotend_cooling_rate": [
|
||||
"2",
|
||||
"2",
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"hotend_heating_rate": [
|
||||
"2",
|
||||
"2",
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
|
||||
@@ -8,6 +8,7 @@
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"apply_top_surface_compensation": "0",
|
||||
"best_object_pos": "0.5x0.5",
|
||||
"default_filament_profile": [],
|
||||
"default_print_profile": "0.16mm Optimal @BBL X1C",
|
||||
@@ -17,14 +18,19 @@
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_dist_to_rod": "33",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"enable_pre_heating": "0",
|
||||
"bed_temperature_formula": "by_first_filament",
|
||||
"hotend_cooling_rate": "2",
|
||||
"hotend_heating_rate": "2",
|
||||
"hotend_cooling_rate": [
|
||||
"2"
|
||||
],
|
||||
"hotend_heating_rate": [
|
||||
"2"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
@@ -84,6 +90,7 @@
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_prepare_compensation_time": "260",
|
||||
"machine_switch_extruder_time": "0",
|
||||
"machine_unload_filament_time": "29",
|
||||
"master_extruder_id": "1",
|
||||
@@ -120,7 +127,7 @@
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
"5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
|
||||
@@ -6,11 +6,19 @@
|
||||
"setting_id": "GP084",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"travel_speed": "700",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,10 +6,18 @@
|
||||
"setting_id": "GP050",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"initial_layer_speed": "16",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP063",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": "5000",
|
||||
"default_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"outer_wall_acceleration": [
|
||||
"2500"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,14 +6,26 @@
|
||||
"setting_id": "GP118",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,13 +6,25 @@
|
||||
"setting_id": "GP117",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_speed": "16",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,10 +6,16 @@
|
||||
"setting_id": "GP116",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
|
||||
@@ -6,10 +6,16 @@
|
||||
"setting_id": "GP115",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"compatible_printers": [
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP076",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP049",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,14 +6,26 @@
|
||||
"setting_id": "GP119",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,17 +6,35 @@
|
||||
"setting_id": "GP102",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"gap_infill_speed": "210",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"gap_infill_speed": [
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "150",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"sparse_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,13 +6,25 @@
|
||||
"setting_id": "GP120",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_speed": "16",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,17 +6,35 @@
|
||||
"setting_id": "GP101",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "3000",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": "210",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"gap_infill_speed": [
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "150",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"sparse_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -52,7 +52,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -76,7 +76,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -6,10 +6,16 @@
|
||||
"setting_id": "GP121",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
|
||||
@@ -6,16 +6,31 @@
|
||||
"setting_id": "GP100",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"gap_infill_speed": "210",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "150",
|
||||
"top_surface_speed": "150",
|
||||
"sparse_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,10 +6,16 @@
|
||||
"setting_id": "GP122",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"compatible_printers": [
|
||||
|
||||
@@ -6,16 +6,32 @@
|
||||
"setting_id": "GP099",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "210",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "150",
|
||||
"sparse_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"top_surface_speed": "150",
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
|
||||
@@ -6,11 +6,19 @@
|
||||
"setting_id": "GP085",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"travel_speed": "700",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,10 +6,18 @@
|
||||
"setting_id": "GP051",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"initial_layer_speed": "16",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP064",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": "5000",
|
||||
"default_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"outer_wall_acceleration": [
|
||||
"2500"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,14 +6,26 @@
|
||||
"setting_id": "GP114",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,14 +6,25 @@
|
||||
"setting_id": "GP113",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"default_acceleration": "3000",
|
||||
"elefant_foot_compensation": "0",
|
||||
"initial_layer_speed": "16",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,10 +6,16 @@
|
||||
"setting_id": "GP112",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
|
||||
@@ -6,10 +6,16 @@
|
||||
"setting_id": "GP111",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"compatible_printers": [
|
||||
|
||||
@@ -6,11 +6,19 @@
|
||||
"setting_id": "GP083",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"travel_speed": "700",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,11 +6,19 @@
|
||||
"setting_id": "GP039",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"initial_layer_speed": "16",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"travel_speed": "700",
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -5,11 +5,26 @@
|
||||
"from": "system",
|
||||
"setting_id": "GP123",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": "8000",
|
||||
"initial_layer_speed": "40",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"travel_speed": "1000",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -15,7 +15,10 @@
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -51,7 +51,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -6,11 +6,19 @@
|
||||
"setting_id": "GP086",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"initial_layer_speed": "16",
|
||||
"travel_speed": "700",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,10 +6,18 @@
|
||||
"setting_id": "GP052",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"initial_layer_speed": "16",
|
||||
"initial_layer_infill_speed": "28",
|
||||
"travel_speed": "700",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP065",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"default_acceleration": "5000",
|
||||
"default_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"outer_wall_acceleration": [
|
||||
"2500"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP077",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,9 +6,13 @@
|
||||
"setting_id": "GP044",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": "6000",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": "700",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,25 +6,90 @@
|
||||
"setting_id": "GP142",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_layers": "7",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "50",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"initial_layer_speed": "40",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "100",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100",
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_shell_layers": "9",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_speed": "150",
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,17 +6,35 @@
|
||||
"setting_id": "GP106",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"gap_infill_speed": "230",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"gap_infill_speed": [
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "180",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"sparse_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -6,17 +6,35 @@
|
||||
"setting_id": "GP105",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "3000",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": "230",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_speed": "60",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"gap_infill_speed": [
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "180",
|
||||
"top_surface_speed": "150",
|
||||
"travel_speed": "700",
|
||||
"sparse_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
|
||||
@@ -76,7 +76,10 @@
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
|
||||
@@ -6,15 +6,31 @@
|
||||
"setting_id": "GP104",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "230",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "180",
|
||||
"top_surface_speed": "150",
|
||||
"sparse_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user