update OrcaFilamentLibrary (#8753)

* update OrcaFilamentLibrary
disable activate_air_filtration and remove filament_start_gcode

* Revert "update OrcaFilamentLibrary
disable activate_air_filtration and remove filament_start_gcode"

This reverts commit 1b8eebcff3.

resources/profiles/OrcaFilamentLibrary.json

@@ -1,6 +1,6 @@
 {
     "name": "OrcaFilamentLibrary",
-    "version": "02.03.00.01",
+    "version": "02.03.00.02",
     "force_update": "0",
     "description": "Orca Filament Library",
     "filament_list": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @System.json

@@ -9,7 +9,7 @@
         "0"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json

@@ -24,7 +24,7 @@
         "10"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @System.json

@@ -11,8 +11,5 @@
     "slow_down_layer_time": [
         "8"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json

@@ -14,8 +14,5 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json

@@ -14,8 +14,5 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json

@@ -11,8 +11,5 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json

@@ -11,8 +11,5 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json

@@ -11,8 +11,5 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json

@@ -14,8 +14,5 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json

@@ -8,8 +8,5 @@
     "filament_max_volumetric_speed": [
         "21"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json

@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OGFSA05_01",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json

@@ -11,8 +11,5 @@
     "supertack_plate_temp_initial_layer": [
         "35"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @System.json

@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OGFSA08_00",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json

@@ -8,8 +8,5 @@
     "filament_max_volumetric_speed": [
         "21"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json

@@ -20,8 +20,5 @@
     "nozzle_temperature_initial_layer": [
         "230"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json

@@ -15,8 +15,5 @@
     "slow_down_layer_time": [
         "4"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture Matte PLA @System.json

@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OGFSL05_00",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture PLA @System.json

@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OGFSL04_05",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF @base.json

@@ -72,7 +72,7 @@
         "5"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "147"

resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-ESD @base.json

@@ -60,7 +60,7 @@
         "2"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "76"

resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF @base.json

@@ -66,7 +66,7 @@
         "2"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "textured_plate_temp": [
         "70"

resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PETG @base.json

@@ -48,7 +48,7 @@
         "12"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "textured_plate_temp": [
         "70"

resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA @System.json

@@ -8,8 +8,5 @@
     "filament_max_volumetric_speed": [
         "15"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @System.json

@@ -11,8 +11,5 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Marble PLA @base.json

@@ -16,8 +16,5 @@
     ],
     "filament_vendor": [
         "SUNLU"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PETG @base.json

@@ -77,8 +77,5 @@
     ],
     "temperature_vitrification": [
         "68"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @System.json

@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OSNLS02",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA Matte @base.json

@@ -46,8 +46,5 @@
     ],
     "nozzle_temperature_range_low": [
         "205"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @System.json

@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OSNLS04",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ 2.0 @base.json

@@ -40,8 +40,5 @@
     ],
     "temperature_vitrification": [
         "54"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @System.json

@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OSNLS03",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU PLA+ @base.json

@@ -40,8 +40,5 @@
     ],
     "temperature_vitrification": [
         "54"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @System.json

@@ -5,8 +5,5 @@
     "from": "system",
     "setting_id": "OSNLS05",
     "instantiation": "true",
-    "compatible_printers": [],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-    ]
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Silk PLA+ @base.json

@@ -47,8 +47,5 @@
     ],
     "temperature_vitrification": [
         "54"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }

resources/profiles/OrcaFilamentLibrary/filament/SUNLU/SUNLU Wood PLA @base.json

@@ -49,8 +49,5 @@
     ],
     "temperature_vitrification": [
         "54"
-    ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json

@@ -5,7 +5,7 @@
     "from": "system",
     "instantiation": "false",
     "activate_air_filtration": [
-        "1"
+        "0"
     ],
     "supertack_plate_temp": [
         "0"
@@ -20,10 +20,10 @@
         "0"
     ],
     "eng_plate_temp": [
-        "90"
+        "100"
     ],
     "eng_plate_temp_initial_layer": [
-        "90"
+        "105"
     ],
     "fan_cooling_layer_time": [
         "30"
@@ -47,10 +47,10 @@
         "ABS"
     ],
     "hot_plate_temp": [
-        "90"
+        "100"
     ],
     "hot_plate_temp_initial_layer": [
-        "90"
+        "105"
     ],
     "nozzle_temperature": [
         "260"
@@ -77,15 +77,18 @@
         "3"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "textured_plate_temp": [
-        "90"
+        "100"
     ],
     "textured_plate_temp_initial_layer": [
-        "90"
+        "105"
     ],
     "filament_flow_ratio": [
         "0.926"
+    ],
+    "temperature_vitrification": [
+        "110"
     ]
 }

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json

@@ -5,7 +5,7 @@
     "from": "system",
     "instantiation": "false",
     "activate_air_filtration": [
-        "1"
+        "0"
     ],
     "supertack_plate_temp": [
         "0"
@@ -20,10 +20,10 @@
         "0"
     ],
     "eng_plate_temp": [
-        "90"
+        "100"
     ],
     "eng_plate_temp_initial_layer": [
-        "90"
+        "105"
     ],
     "fan_cooling_layer_time": [
         "35"
@@ -47,10 +47,10 @@
         "ASA"
     ],
     "hot_plate_temp": [
-        "90"
+        "100"
     ],
     "hot_plate_temp_initial_layer": [
-        "90"
+        "105"
     ],
     "nozzle_temperature": [
         "260"
@@ -77,15 +77,18 @@
         "3"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "textured_plate_temp": [
-        "90"
+        "100"
     ],
     "textured_plate_temp_initial_layer": [
-        "90"
+        "105"
     ],
     "filament_flow_ratio": [
         "0.926"
+    ],
+    "temperature_vitrification": [
+        "110"
     ]
 }

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json

@@ -75,7 +75,7 @@
         "0"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "45"

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json

@@ -177,11 +177,11 @@
     "textured_plate_temp_initial_layer": [
         "60"
     ],
-    "compatible_printers": [],
     "filament_start_gcode": [
-        "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+        "; Filament gcode\n"
     ],
     "filament_end_gcode": [
-        "; filament end gcode \nM106 P3 S0\n"
-    ]
+        "; filament end gcode\n"
+    ],
+    "compatible_printers": []
 }

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json

@@ -75,7 +75,7 @@
         "270"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "slow_down_layer_time": [
         "6"

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json

@@ -6,7 +6,7 @@
     "from": "system",
     "instantiation": "false",
     "activate_air_filtration": [
-        "1"
+        "0"
     ],
     "supertack_plate_temp": [
         "0"
@@ -75,7 +75,7 @@
         "2"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "108"

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json

@@ -72,7 +72,7 @@
         "2"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "120"

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json

@@ -75,7 +75,7 @@
         "4"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "45"

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json

@@ -75,7 +75,7 @@
         "4"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "120"

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json

@@ -72,7 +72,7 @@
         "4"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "45"

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json

@@ -75,7 +75,7 @@
         "4"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "110"

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json

@@ -6,7 +6,7 @@
     "from": "system",
     "instantiation": "false",
     "activate_air_filtration": [
-        "1"
+        "0"
     ],
     "supertack_plate_temp": [
         "0"
@@ -81,7 +81,7 @@
         "2"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "temperature_vitrification": [
         "210"

resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json

@@ -72,7 +72,7 @@
         "250"
     ],
     "slow_down_min_speed": [
-        "20"
+        "10"
     ],
     "slow_down_layer_time": [
         "4"