juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-14 09:02:06 +00:00
Code Issues Packages Projects Releases Wiki Activity

Fix bold text in Calibration.md (#8239)

Browse Source 
* Fix bold text in Calibration.md

* Update doc/Calibration.md

Co-authored-by: discip <53649486+discip@users.noreply.github.com>

---------

Co-authored-by: discip <53649486+discip@users.noreply.github.com>
This commit is contained in:
Andres Gongora
2025-02-02 13:58:12 +01:00
committed by GitHub
parent 2767f180b6
commit 41236140ca
1 changed files with 2 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
doc/Calibration.md
View File

@@ -35,7 +35,8 @@ Steps
5. Update the flow ratio in the filament settings using the following equation: `FlowRatio_old*(100 + modifier)/100`. If your previous flow ratio was `0.98` and you selected the block with a flow rate modifier of `+5`, the new value should be calculated as follows: `0.98x(100+5)/100 = 1.029`.** Remember** to save the filament profile.
6. Perform the `Pass 2` calibration. This process is similar to `Pass 1`, but a new project with ten blocks will be generated. The flow rate modifiers for this project will range from `-9 to 0`.
7. Repeat steps 4 and 5. In this case, if your previous flow ratio was 1.029 and you selected the block with a flow rate modifier of -6, the new value should be calculated as follows: `1.029x(100-6)/100 = 0.96726`. ** Remember ** to save the filament profile.
7. Repeat steps 4. and 5. In this case, if your previous flow ratio was 1.029 and you selected the block with a flow rate modifier of -6, the new value should be calculated as follows: `1.029x(100-6)/100 = 0.96726`. **Remember** to save the filament profile.
![pass2](https://user-images.githubusercontent.com/103989404/210139072-f2fa91a6-4e3b-4d2a-81f2-c50155e1ff6d.jpg)
![-6](https://user-images.githubusercontent.com/103989404/210139131-ee224146-b242-4c1c-ac96-35ef0ca591f1.jpg)
![image](./images/flowcalibration_update_flowrate.jpg)