mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-06-10 05:52:44 +00:00
harktech: normalize Creality K2 filament profiles per repo convention
CI flagged ~150 K2 profile files for using space indentation; repo convention
is tab indentation. Ran the upstream-provided fixer:
python3 scripts/orca_filament_lib.py -v Creality -p filament -f --force
Mechanical normalization:
- Spaces → tabs (1 tab per indent level)
- Field ordering normalized (name + type first)
- Single-value scalar fields converted to single-element arrays where the
schema expects arrays (filament_cost, filament_density,
temperature_vitrification, filament_max_volumetric_speed)
No semantic content changes. Pre-existing issue from the original K2
profile import; touching these files in the multicolor_method strip
brought them into the validator's PR-diff scope.
This commit is contained in:
grant0013
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Creality K2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "07001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
|
||||
@@ -1,106 +1,114 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.036",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Creality K2 0.6 nozzle",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "07001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.036",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
|
||||
@@ -1,106 +1,114 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.032",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Creality K2 0.8 nozzle",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "07001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.032",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 Plus 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "1",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Creality K2 Plus 0.2 nozzle",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "07001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
|
||||
@@ -1,105 +1,113 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_layer": "2",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Creality K2 Plus 0.4 nozzle",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "07001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_layer": "2",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Creality K2 Plus 0.6 nozzle",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "07001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Creality K2 Plus 0.8 nozzle",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "07001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
|
||||
@@ -1,106 +1,114 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Creality K2 Pro 0.4 nozzle",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "07001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
|
||||
@@ -1,106 +1,114 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 Pro 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.036",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Creality K2 Pro 0.6 nozzle",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "07001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.036",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
|
||||
@@ -1,106 +1,114 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 Pro 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Creality K2 Pro 0.8 nozzle",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "07001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
|
||||
@@ -1,105 +1,113 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "11001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Nylon @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "100",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "80",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "52",
|
||||
"filament_density": "1.12",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "12",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.5",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "250",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "0%",
|
||||
"pressure_advance": "0.064",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "16",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-Nylon @Creality K2 Plus 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "11001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "100",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "80",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"52"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.12"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.5",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "250",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "0%",
|
||||
"pressure_advance": "0.064",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "16",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,107 +1,115 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "04001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Creality K2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "04001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "04001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA @Creality K2 Plus 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "1",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Creality K2 Plus 0.2 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "04001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "04001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Creality K2 Plus 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "04001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "04001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Creality K2 Plus 0.6 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "04001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "04001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Creality K2 Plus 0.8 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "04001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,107 +1,115 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "04001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Creality K2 Pro 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "04001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "13001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Carbon @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-PLA Carbon @Creality K2 Plus 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "13001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,107 +1,115 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "15001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Fluo @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-PLA Fluo @Creality K2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "15001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "15001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Fluo @Creality K2 Plus 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "1",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.044",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-PLA Fluo @Creality K2 Plus 0.2 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "15001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.044",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "15001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Fluo @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.044",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-PLA Fluo @Creality K2 Plus 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "15001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.044",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "15001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Fluo @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.044",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-PLA Fluo @Creality K2 Plus 0.6 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "15001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.044",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "15001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Fluo @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.044",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-PLA Fluo @Creality K2 Plus 0.8 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "15001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.044",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,107 +1,115 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "15001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Fluo @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-PLA Fluo @Creality K2 Pro 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "15001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,107 +1,115 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "14001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Matte @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "19",
|
||||
"filament_density": "1.3",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-PLA Matte @Creality K2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "14001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"19"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "14001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Matte @Creality K2 Plus 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "19",
|
||||
"filament_density": "1.3",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "1",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-PLA Matte @Creality K2 Plus 0.2 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "14001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"19"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "14001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Matte @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "19",
|
||||
"filament_density": "1.3",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-PLA Matte @Creality K2 Plus 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "14001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"19"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "14001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Matte @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "19",
|
||||
"filament_density": "1.3",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-PLA Matte @Creality K2 Plus 0.6 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "14001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"19"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "14001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Matte @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "19",
|
||||
"filament_density": "1.3",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-PLA Matte @Creality K2 Plus 0.8 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "14001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"19"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,107 +1,115 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "14001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Matte @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "19",
|
||||
"filament_density": "1.3",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-PLA Matte @Creality K2 Pro 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "14001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"19"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,108 +1,116 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "05001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Silk @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "22",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "10",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.4",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "10",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-Silk @Creality K2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "05001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"22"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.4",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "10",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "05001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Silk @Creality K2 Plus 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "22",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "1",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.8",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "230",
|
||||
"nozzle_temperature_initial_layer": "230",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-Silk @Creality K2 Plus 0.2 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "05001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"22"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.8",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "230",
|
||||
"nozzle_temperature_initial_layer": "230",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "05001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Silk @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "22",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "10",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-Silk @Creality K2 Plus 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "05001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"22"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "05001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Silk @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "22",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "12",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "230",
|
||||
"nozzle_temperature_initial_layer": "230",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-Silk @Creality K2 Plus 0.6 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "05001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"22"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "230",
|
||||
"nozzle_temperature_initial_layer": "230",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "05001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Silk @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "22",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "12",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "230",
|
||||
"nozzle_temperature_initial_layer": "230",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-Silk @Creality K2 Plus 0.8 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "05001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"22"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "230",
|
||||
"nozzle_temperature_initial_layer": "230",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,108 +1,116 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "05001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Silk @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "22",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "10",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.4",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "10",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-Silk @Creality K2 Pro 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "05001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"22"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.4",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "10",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,106 +1,114 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "16001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-TPU @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "40",
|
||||
"cool_plate_temp_initial_layer": "40",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "40",
|
||||
"customized_plate_temp_initial_layer": "40",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "35",
|
||||
"eng_plate_temp_initial_layer": "35",
|
||||
"epoxy_resin_plate_temp": "30",
|
||||
"epoxy_resin_plate_temp_initial_layer": "30",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "24",
|
||||
"filament_density": "1.12",
|
||||
"filament_deretraction_speed": "30",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "1",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "2",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.5",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "40",
|
||||
"hot_plate_temp_initial_layer": "40",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "230",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "210",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "95%",
|
||||
"pressure_advance": "0.4",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "40",
|
||||
"textured_plate_temp_initial_layer": "40"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-TPU @Creality K2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "16001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "40",
|
||||
"cool_plate_temp_initial_layer": "40",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "40",
|
||||
"customized_plate_temp_initial_layer": "40",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "35",
|
||||
"eng_plate_temp_initial_layer": "35",
|
||||
"epoxy_resin_plate_temp": "30",
|
||||
"epoxy_resin_plate_temp_initial_layer": "30",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"24"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.12"
|
||||
],
|
||||
"filament_deretraction_speed": "30",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "1",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.5",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "40",
|
||||
"hot_plate_temp_initial_layer": "40",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "230",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "210",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "95%",
|
||||
"pressure_advance": "0.4",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "40",
|
||||
"textured_plate_temp_initial_layer": "40"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "16001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-TPU @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "40",
|
||||
"cool_plate_temp_initial_layer": "40",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "30",
|
||||
"epoxy_resin_plate_temp_initial_layer": "30",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.12",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "1.02",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "2",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "40",
|
||||
"hot_plate_temp_initial_layer": "40",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "210",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "95%",
|
||||
"pressure_advance": "0.34",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "40",
|
||||
"textured_plate_temp_initial_layer": "40"
|
||||
"type": "filament",
|
||||
"name": "CR-TPU @Creality K2 Plus 0.4 nozzle",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "16001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "40",
|
||||
"cool_plate_temp_initial_layer": "40",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "30",
|
||||
"epoxy_resin_plate_temp_initial_layer": "30",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.12"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "1.02",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "40",
|
||||
"hot_plate_temp_initial_layer": "40",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "210",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "95%",
|
||||
"pressure_advance": "0.34",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "40",
|
||||
"textured_plate_temp_initial_layer": "40"
|
||||
}
|
||||
|
||||
@@ -1,106 +1,114 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "16001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-TPU @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "40",
|
||||
"cool_plate_temp_initial_layer": "40",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "40",
|
||||
"customized_plate_temp_initial_layer": "40",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "35",
|
||||
"eng_plate_temp_initial_layer": "35",
|
||||
"epoxy_resin_plate_temp": "30",
|
||||
"epoxy_resin_plate_temp_initial_layer": "30",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "24",
|
||||
"filament_density": "1.12",
|
||||
"filament_deretraction_speed": "30",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "1.02",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "2",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "40",
|
||||
"hot_plate_temp_initial_layer": "40",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "230",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "210",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "95%",
|
||||
"pressure_advance": "0.34",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "40",
|
||||
"textured_plate_temp_initial_layer": "40"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "CR-TPU @Creality K2 Pro 0.4 nozzle",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "16001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "40",
|
||||
"cool_plate_temp_initial_layer": "40",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "40",
|
||||
"customized_plate_temp_initial_layer": "40",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "35",
|
||||
"eng_plate_temp_initial_layer": "35",
|
||||
"epoxy_resin_plate_temp": "30",
|
||||
"epoxy_resin_plate_temp_initial_layer": "30",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"24"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.12"
|
||||
],
|
||||
"filament_deretraction_speed": "30",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "1.02",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "40",
|
||||
"hot_plate_temp_initial_layer": "40",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "230",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "210",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "95%",
|
||||
"pressure_advance": "0.34",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "40",
|
||||
"textured_plate_temp_initial_layer": "40"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "17001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Wood @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "23",
|
||||
"filament_density": "1.22",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.044",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "CR-Wood @Creality K2 Plus 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "17001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"23"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.044",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic ABS @Ender-3V3-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic ABS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_CREALITY_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic ABS @Hi-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic ABS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_CREALITY_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic ABS @K1-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic ABS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_CREALITY_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic ABS @K2-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic ABS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_CREALITY_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic ABS",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic ASA @Ender-3V3-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic ASA",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic ASA @Hi-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic ASA",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic ASA @K1-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic ASA",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic ASA @K2-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic ASA",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic ASA-CF @Hi-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic ASA @Hi-all",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic ASA",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PA-CF @Ender-3V3-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PA-CF",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99_01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 0.4 nozzle",
|
||||
"Creality Ender-3 V3 0.6 nozzle",
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PA-CF @K1-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PA-CF",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99_01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Creality K1 (0.4 nozzle)",
|
||||
"Creality K1 (0.6 nozzle)",
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PA-CF @K2-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PA-CF",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99_01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PA-CF",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PC @K1-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PC",
|
||||
"from": "system",
|
||||
"setting_id": "GFSC99_06",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"60"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PC",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PETG @Ender-3V3-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PETG",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PETG @Hi-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PETG",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PETG @K1-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PETG",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PETG @K2-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PETG",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PETG-CF @Hi-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PETG @Hi-all",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PETG",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA @Ender-3V3-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA @Hi-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA @K1-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA @K2-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA High Speed @Ender-3V3-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA @Ender-3V3-all",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"23"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA High Speed @Hi-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA @Hi-all",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA High Speed @K1-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA @K1-all",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"23"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA High Speed @K2-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA @K2-all",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"23"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA Matte @Ender-3V3-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA @Ender-3V3-all",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL05_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA Matte @Hi-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA @Hi-all",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL05_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA Matte @K1-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA @K1-all",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL05_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA Matte @K2-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA @K2-all",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL05_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA Silk @Ender-3V3-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA @Ender-3V3-all",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"7.5"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA Silk @Hi-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA @Hi-all",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA Silk @K1-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA @K1-all",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"7.5"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA Silk @K2-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA @K2-all",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA Wood @Hi-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA @Hi-all",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.88"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA-CF @Hi-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA-CF",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA-CF @K1-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA-CF",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA-CF @K2-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic PLA-CF",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA-CF",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL98",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic PLA",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic TPU @Ender-3V3-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic TPU",
|
||||
"from": "system",
|
||||
"setting_id": "GFU99_CREALITY_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic TPU @Hi-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic TPU",
|
||||
"from": "system",
|
||||
"setting_id": "GFU99_CREALITY_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic TPU @K1-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic TPU",
|
||||
"from": "system",
|
||||
"setting_id": "GFU99_CREALITY_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic TPU @K2-all",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "Creality Generic TPU",
|
||||
"from": "system",
|
||||
"setting_id": "GFU99_CREALITY_00",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Creality Generic TPU",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
|
||||
@@ -1,107 +1,115 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "EN-PLA+ @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "23",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "EN-PLA+ @Creality K2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "09001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"23"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,104 +1,112 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "EN-PLA+ @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "23",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "EN-PLA+ @Creality K2 Plus 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "09001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"23"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,107 +1,115 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "EN-PLA+ @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "23",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "EN-PLA+ @Creality K2 Pro 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "09001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"23"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,108 +1,116 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09002",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "ENDER FAST PLA @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "24",
|
||||
"filament_density": "1.21",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "23",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "ENDER FAST PLA @Creality K2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "09002",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"24"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"23"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,105 +1,113 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09002",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "ENDER FAST PLA @Creality K2 Plus 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.21",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "2",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.05",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "6",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "53",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "ENDER FAST PLA @Creality K2 Plus 0.2 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "09002",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.05",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "6",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"53"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,105 +1,113 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09002",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "ENDER FAST PLA @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.21",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "23",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "1",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "6",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "53",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "ENDER FAST PLA @Creality K2 Plus 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "09002",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"23"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "1",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "6",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"53"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,105 +1,113 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09002",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "ENDER FAST PLA @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.21",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "23",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.035",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "6",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "53",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "ENDER FAST PLA @Creality K2 Plus 0.6 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "09002",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"23"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.035",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "6",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"53"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,105 +1,113 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09002",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "ENDER FAST PLA @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.21",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "23",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.03",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "6",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "53",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
"type": "filament",
|
||||
"name": "ENDER FAST PLA @Creality K2 Plus 0.8 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "09002",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"23"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.03",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "6",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"53"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,108 +1,116 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09002",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "ENDER FAST PLA @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "24",
|
||||
"filament_density": "1.21",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "23",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "ENDER FAST PLA @Creality K2 Pro 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "09002",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"24"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"23"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
@@ -1,107 +1,115 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "08001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Ender-PLA @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Ender-PLA @Creality K2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "08001",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user