Merge branch 'main' into feat/plugin-feature

.github/workflows/auto-close-duplicates.yml

@@ -15,7 +15,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Setup Bun
         uses: oven-sh/setup-bun@v2

.github/workflows/backfill-duplicate-comments.yml

@@ -29,7 +29,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
       
       - name: Setup Bun
         uses: oven-sh/setup-bun@v2

.github/workflows/build_all.yml

@@ -131,7 +131,7 @@ jobs:
     if: ${{ !cancelled() && success() }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
         with:
           sparse-checkout: |
             .github
@@ -204,7 +204,7 @@ jobs:
     - name: "Remove unneeded stuff to free disk space"
       run:
         rm -rf /usr/local/lib/android/* /usr/share/dotnet/* /opt/ghc1/* "/usr/local/share/boost1/*" /opt/hostedtoolcache1/*
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v7
     - name: Get the version and date
       run: |
         ver_pure=$(grep 'set(SoftFever_VERSION' version.inc | cut -d '"' -f2)
@@ -223,14 +223,14 @@ jobs:
     # Manage flatpak-builder cache externally so PRs restore but never upload
     - name: Restore flatpak-builder cache
       if: github.event_name == 'pull_request'
-      uses: actions/cache/restore@v5
+      uses: actions/cache/restore@v6
       with:
         path: .flatpak-builder
         key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.event.pull_request.base.sha }}
         restore-keys: flatpak-builder-${{ matrix.variant.arch }}-
     - name: Save/restore flatpak-builder cache
       if: github.event_name != 'pull_request'
-      uses: actions/cache@v5
+      uses: actions/cache@v6
       with:
         path: .flatpak-builder
         key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.sha }}

.github/workflows/build_check_cache.yml

@@ -26,7 +26,7 @@ jobs:
       valid-cache: ${{ steps.cache_deps.outputs.cache-hit }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
         with:
           lfs: 'false'
         
@@ -46,7 +46,7 @@ jobs:
             
       - name: load cache
         id: cache_deps
-        uses: actions/cache@v5
+        uses: actions/cache@v6
         with:
           path: ${{ steps.set_outputs.outputs.cache-path }}
           key: ${{ steps.set_outputs.outputs.cache-key }}

.github/workflows/build_deps.yml

@@ -34,12 +34,12 @@ jobs:
 
       # Setup the environment
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
         with:
           lfs: 'false'
 
       - name: load cached deps
-        uses: actions/cache@v5
+        uses: actions/cache@v6
         with:
           path: ${{ inputs.cache-path }}
           key: ${{ inputs.cache-key }}

.github/workflows/build_orca.yml

@@ -37,13 +37,13 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
         with:
           lfs: 'false'
 
       - name: load cached deps
         if: ${{ !(runner.os == 'macOS' && inputs.macos-combine-only) }}
-        uses: actions/cache@v5
+        uses: actions/cache@v6
         with:
           path: ${{ inputs.cache-path }}
           key: ${{ inputs.cache-key }}

.github/workflows/check_locale.yml

@@ -14,7 +14,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:  
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Install gettext 
         run: |

.github/workflows/check_profiles.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Run extra JSON check
         id: extra_json_check
@@ -77,11 +77,101 @@ jobs:
         continue-on-error: true
         working-directory: ${{ github.workspace }}
         run: |
-          set +e
+          fixtures_dir="${{ runner.temp }}/profile-fixtures"
-          curl -LJO https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/orca_custom_preset_tests.zip
+          output_dir="${{ runner.temp }}/custom-preset-validation"
-          unzip -q ./orca_custom_preset_tests.zip -d ${{ github.workspace }}/resources/profiles
+          combined_log="${{ runner.temp }}/validate_custom.log"
-          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_custom.log
+          summary="${output_dir}/summary.md"
-          exit ${PIPESTATUS[0]}
+          release_url="https://github.com/OrcaSlicer/OrcaSlicer-profile-validator/releases/download/fixture-archive"
+
+          rm -rf "${fixtures_dir}" "${output_dir}"
+          mkdir -p "${fixtures_dir}" "${output_dir}"
+
+          curl -fsSL -o "${fixtures_dir}/manifest.json" "${release_url}/manifest.json"
+
+          MANIFEST_PATH="${fixtures_dir}/manifest.json" python3 <<'PY' > "${fixtures_dir}/fixtures.tsv"
+          import json
+          import os
+
+          with open(os.environ["MANIFEST_PATH"], encoding="utf-8") as fh:
+              manifest = json.load(fh)
+
+          if isinstance(manifest, dict):
+              entries = manifest.get("fixtures", [])
+          else:
+              entries = manifest
+
+          for entry in entries:
+              version = entry.get("version", "")
+              asset = entry.get("asset", "")
+              sha256 = entry.get("asset_sha256", "")
+              if not version or not asset:
+                  continue
+              print(f"{version}\t{asset}\t{sha256}")
+          PY
+
+          if [ ! -s "${fixtures_dir}/fixtures.tsv" ]; then
+            echo "No custom preset fixtures found in ${release_url}/manifest.json" | tee "${combined_log}"
+            exit 1
+          fi
+
+          {
+            echo "## Custom Preset Fixture Validation"
+            echo ""
+            echo "| Version | Status | Log |"
+            echo "| --- | --- | --- |"
+          } > "${summary}"
+
+          status=0
+          failed_logs=()
+
+          while IFS=$'\t' read -r version asset expected_sha256; do
+            fixture_zip="${fixtures_dir}/${asset}"
+            asset_url_name="$(python3 -c 'import sys, urllib.parse; print(urllib.parse.quote(sys.argv[1], safe=""))' "${asset}")"
+            profile_tree="${output_dir}/profiles-${version}"
+            log_path="${output_dir}/${version}.log"
+
+            curl -fsSL -o "${fixture_zip}" "${release_url}/${asset_url_name}"
+
+            if [ -n "${expected_sha256}" ] && [ "${expected_sha256}" != "<sha256>" ]; then
+              echo "${expected_sha256}  ${fixture_zip}" | sha256sum -c -
+            fi
+
+            rm -rf "${profile_tree}"
+            mkdir -p "${profile_tree}"
+            cp -a "${{ github.workspace }}/resources/profiles/." "${profile_tree}/"
+            rm -rf "${profile_tree}/user"
+            unzip -q "${fixture_zip}" -d "${profile_tree}"
+
+            set +e
+            ./OrcaSlicer_profile_validator -p "${profile_tree}" -l 2 > "${log_path}" 2>&1
+            result=$?
+            set -e
+
+            if [ "${result}" -eq 0 ]; then
+              echo "| ${version} | PASS | ${version}.log |" >> "${summary}"
+            else
+              echo "| ${version} | FAIL | ${version}.log |" >> "${summary}"
+              failed_logs+=("${log_path}")
+              status=1
+            fi
+          done < "${fixtures_dir}/fixtures.tsv"
+
+          {
+            cat "${summary}"
+            if [ "${#failed_logs[@]}" -gt 0 ]; then
+              echo ""
+              echo "## Failed Fixture Logs"
+              for log_path in "${failed_logs[@]}"; do
+                echo ""
+                echo "### $(basename "${log_path}" .log)"
+                echo '```'
+                head -c 12000 "${log_path}" || echo "No output captured"
+                echo '```'
+              done
+            fi
+          } | tee "${combined_log}"
+
+          exit "${status}"
 
       - name: Prepare PR number for comment workflow
         if: ${{ always() && github.event_name == 'pull_request' }}

.github/workflows/dedupe-issues.yml

@@ -20,7 +20,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Run Claude Code slash command
         uses: anthropics/claude-code-base-action@beta

.github/workflows/doxygen-docs.yml

@@ -26,7 +26,7 @@ jobs:
           remove-existing-swap-files: true
 
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Install Doxygen and Graphviz
         run: |

.github/workflows/shellcheck.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       - name: Cache shellcheck download
         id: cache-shellcheck-v0_11
-        uses: actions/cache@v5
+        uses: actions/cache@v6
         with:
           path: ~/shellcheck
           key: ${{ runner.os }}-shellcheck-v0_11
@@ -36,7 +36,7 @@ jobs:
           tar -xvf ~/sc.tar.xz -C ~
           mv ~/shellcheck-"${INPUT_VERSION}"/shellcheck ~/shellcheck
 
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v7
         with:
           fetch-depth: 1
 

.github/workflows/update-translation.yml

@@ -10,7 +10,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:  
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v7
 
       - name: Setup Python
         uses: actions/setup-python@v6

resources/profiles/Anker/process/0.20mm Optimal 0.6 nozzle @Anker.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Optimal 0.6 nozzle @Anker",
+	"renamed_from": "0.20mm Optimal 0.6 nozzle @Anker.json",
 	"inherits": "fdm_process_anker_common_0_6",
 	"from": "system",
 	"setting_id": "re5qmcOFJ1OJP3Ip",

resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Bambu PLA Tough @BBL X1C",
+	"renamed_from": "Bambu PLA Impact @BBL X1C",
 	"inherits": "Bambu PLA Tough @base",
 	"from": "system",
 	"setting_id": "GFSA09_02",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1",
+	"renamed_from": "Panchroma PLA Stain @BBL A1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_00",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1M",
+	"renamed_from": "Panchroma PLA Stain @BBL A1M",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_02",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL P1P",
+	"renamed_from": "Panchroma PLA Stain @BBL P1P",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_04",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL X1",
+	"renamed_from": "Panchroma PLA Stain @BBL X1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_06",

resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Standard @BBL X1C",
+	"renamed_from": "0.20mm Bambu Support W @BBL X1C",
 	"inherits": "fdm_process_single_0.20",
 	"from": "system",
 	"setting_id": "GP004",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.12mm Fine @Creality Ender3V3SE 0.4",
+	"renamed_from": "0.12mm Fine @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "W68mSPdmat2rCXuD",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.16mm Optimal @Creality Ender3V3SE 0.4",
+	"renamed_from": "0.16mm Optimal @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "jvnrh3jh6Btbs1Ja",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Standard @Creality Ender3V3SE 0.4",
+	"renamed_from": "0.20mm Standard @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "YLkw9eyyK7cm97ek",

resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Standard @Creality K1 SE",
+	"renamed_from": "0.20mm Fast @Creality K1 SE 0.4",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "eR9pRC1qPENNx8U9",
@@ -264,4 +265,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
+}

resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.24mm Draft @Creality Ender3V3SE 0.4",
+	"renamed_from": "0.24mm Draft @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "Hg10EUNCLMEYYBN1",

resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.48mm Draft @Creality K1C",
+	"renamed_from": "0.48mm Draft @Creality K1C (0.8 nozzle)",
 	"inherits": "fdm_process_common_klipper",
 	"from": "system",
 	"setting_id": "qaiff3f8gSQ1GVj1",

resources/profiles/Elegoo/filament/Generic/Generic PETG PRO @Elegoo.json

@@ -2,6 +2,7 @@
 	"type": "filament",
 	"setting_id": "pKzSR8XeyyUDbrNW",
 	"name": "Generic PETG PRO @Elegoo",
+	"renamed_from": "Elegoo Generic PETG PRO",
 	"from": "system",
 	"instantiation": "true",
 	"inherits": "Generic PETG @base",

resources/profiles/Ginger Additive/filament/Ginger Generic PETG.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Ginger Generic PETG",
+	"renamed_from": "Ginger Generic rPETG",
 	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "ue95N2e65rdp5K6c",

resources/profiles/Ginger Additive/filament/Ginger Generic PLA.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Ginger Generic PLA",
+	"renamed_from": "Ginger Generic rPLA",
 	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "Z1scjKDBFoDaTa2C",

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG PRO @System.json

@@ -18,5 +18,5 @@
 		"5"
 	],
 	"compatible_printers": [],
-	"renamed_from": "Elegoo PETG PRO"
+	"renamed_from": "Elegoo PETG PRO;Elegoo PETG Pro @System"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid PETG @System.json

@@ -33,5 +33,5 @@
 		"250"
 	],
 	"compatible_printers": [],
-	"renamed_from": "Elegoo Rapid PETG;Elegoo Rapid PETG+"
+	"renamed_from": "Elegoo Rapid PETG;Elegoo Rapid PETG+;Elegoo RAPID PETG;Elegoo RAPID PETG+"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid PLA+ @System.json

@@ -45,5 +45,5 @@
 		"; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
 	],
 	"compatible_printers": [],
-	"renamed_from": "Elegoo Rapid PLA+"
+	"renamed_from": "Elegoo Rapid PLA+;Elegoo RAPID PLA+"
 }

resources/profiles/Peopoly/filament/Peopoly Generic PLA.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Peopoly Generic PLA",
+	"renamed_from": "Peopoly Generic PLA 0.8 nozzle",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "KNsVV4dvEWAAkzDE",

resources/profiles/Snapmaker/filament/Snapmaker PLA.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA",
+	"renamed_from": "PolyLite PLA",
 	"inherits": "Snapmaker PLA @base",
 	"from": "system",
 	"setting_id": "cW1b4nGxE9yXIXJP",

resources/profiles/Voron.json

@@ -206,6 +206,10 @@
 			"name": "0.24mm Fine 0.8 nozzle @Voron",
 			"sub_path": "process/0.24mm Fine 0.8 nozzle @Voron.json"
 		},
+		{
+			"name": "0.32mm Optimal 0.8 nozzle @Voron",
+			"sub_path": "process/0.32mm Optimal 0.8 nozzle @Voron.json"
+		},
 		{
 			"name": "0.40mm Standard 0.8 nozzle @Voron",
 			"sub_path": "process/0.40mm Standard 0.8 nozzle @Voron.json"

resources/profiles/Voron/process/0.32mm Optimal 0.8 nozzle @Voron.json

@@ -0,0 +1,11 @@
+{
+	"type": "process",
+	"name": "0.32mm Optimal 0.8 nozzle @Voron",
+	"inherits": "fdm_process_voron_common_0_8",
+	"from": "system",
+	"setting_id": "ivS6U4AuIoj1cJhZ",
+	"instantiation": "true",
+	"bottom_shell_layers": "3",
+	"top_shell_layers": "3",
+	"layer_height": "0.32"
+}

src/CMakeLists.txt

@@ -201,9 +201,12 @@ if (WIN32)
     if(MSVC)
         target_link_options(OrcaSlicer_app_gui PUBLIC "$<$<CONFIG:RELEASE>:/DEBUG>")
     endif()
-    target_compile_definitions(OrcaSlicer_app_gui PRIVATE -DSLIC3R_WRAPPER_NOCONSOLE)
+    target_compile_definitions(OrcaSlicer_app_gui PRIVATE "$<$<NOT:$<CONFIG:RelWithDebInfo>>:SLIC3R_WRAPPER_NOCONSOLE>")
     add_dependencies(OrcaSlicer_app_gui OrcaSlicer)
-    set_target_properties(OrcaSlicer_app_gui PROPERTIES OUTPUT_NAME "orca-slicer")
+    set_target_properties(OrcaSlicer_app_gui PROPERTIES
+        OUTPUT_NAME "orca-slicer"
+        WIN32_EXECUTABLE "$<NOT:$<CONFIG:RelWithDebInfo>>"
+    )
     target_link_libraries(OrcaSlicer_app_gui PRIVATE boost_headeronly)
 endif ()
 

src/libslic3r/CMakeLists.txt

@@ -532,6 +532,7 @@ endif ()
 encoding_check(libslic3r)
 
 target_compile_definitions(libslic3r PUBLIC -DUSE_TBB -DTBB_USE_CAPTURED_EXCEPTION=0)
+target_compile_definitions(libslic3r PRIVATE $<$<CONFIG:RelWithDebInfo>:SLIC3R_CONSOLE_LOG>)
 target_include_directories(libslic3r PRIVATE ${CMAKE_CURRENT_SOURCE_DIR} PUBLIC ${CMAKE_CURRENT_BINARY_DIR})
 target_include_directories(libslic3r SYSTEM PUBLIC ${EXPAT_INCLUDE_DIRS})
 

src/libslic3r/PlaceholderParser.cpp

@@ -836,9 +836,11 @@ namespace client
         static std::map<std::string, std::string> tag_to_error_message;
 
         size_t get_extruder_id() const {
-            const ConfigOptionInts * filament_map_opt = external_config->option<ConfigOptionInts>("filament_map");
+            if (external_config != nullptr) {
-            if (filament_map_opt && current_extruder_id < filament_map_opt->values.size()) {
+                const ConfigOptionInts * filament_map_opt = external_config->option<ConfigOptionInts>("filament_map");
-                return filament_map_opt->values[current_extruder_id];
+                if (filament_map_opt && current_extruder_id < filament_map_opt->values.size()) {
+                    return filament_map_opt->values[current_extruder_id];
+                }
             }
             return 0;
         }
@@ -1096,27 +1098,109 @@ namespace client
             const ConfigOptionVectorBase* vec = static_cast<const ConfigOptionVectorBase*>(opt.opt);
             if (vec->empty())
                 ctx->throw_exception("Indexing an empty vector variable", opt.it_range);
+
+            // Helper to resolve a FloatOrPercent value (handles ratio_over chain for percent values).
+            // elem_index: the element index used to access this vector element, so that
+            // parent vectors (via ratio_over) use the same index rather than the current extruder.
+            auto resolve_float_or_percent = [ctx, &opt, &output](const FloatOrPercent &fop, size_t elem_index) {
+                std::string opt_key(opt.it_range.begin(), opt.it_range.end());
+                if (boost::ends_with(opt_key, "line_width")) {
+                    // Line width supports defaults and a complex graph of dependencies.
+                    output.set_d(Flow::extrusion_width(opt_key, *ctx, static_cast<unsigned int>(ctx->current_extruder_id)));
+                } else if (! fop.percent) {
+                    // Not a percent, just return the value.
+                    output.set_d(fop.value);
+                } else {
+                    // Resolve dependencies using the "ratio_over" link to a parent value.
+                    const ConfigOptionDef *opt_def = print_config_def.get(opt_key);
+                    assert(opt_def != nullptr);
+                    double v = fop.value * 0.01; // percent to ratio
+                    for (;;) {
+                        const ConfigOption *opt_parent = opt_def->ratio_over.empty() ? nullptr : ctx->resolve_symbol(opt_def->ratio_over);
+                        if (opt_parent == nullptr)
+                            ctx->throw_exception("FloatOrPercent variable failed to resolve the \"ratio_over\" dependencies", opt.it_range);
+                        if (boost::ends_with(opt_def->ratio_over, "line_width")) {
+                            // Line width supports defaults and a complex graph of dependencies.
+                            assert(opt_parent->type() == coFloatOrPercent);
+                            v *= Flow::extrusion_width(opt_def->ratio_over, static_cast<const ConfigOptionFloatOrPercent*>(opt_parent), *ctx, static_cast<unsigned int>(ctx->current_extruder_id));
+                            break;
+                        }
+                        if (opt_parent->type() == coFloat || opt_parent->type() == coFloatOrPercent) {
+                            v *= opt_parent->getFloat();
+                            if (opt_parent->type() == coFloat || ! static_cast<const ConfigOptionFloatOrPercent*>(opt_parent)->percent)
+                                break;
+                            v *= 0.01; // percent to ratio
+                        } else if (opt_parent->type() == coFloats) {
+                            // Vector parent: extract the value for the current extruder.
+                            const ConfigOptionFloatsNullable *parent_nullable = dynamic_cast<const ConfigOptionFloatsNullable *>(opt_parent);
+                            if (parent_nullable) {
+                                v *= (parent_nullable->size() == 1) ? parent_nullable->get_at(0) : parent_nullable->get_at(elem_index);
+                            } else {
+                                const ConfigOptionFloats *parent_vec = static_cast<const ConfigOptionFloats *>(opt_parent);
+                                v *= (parent_vec->size() == 1) ? parent_vec->get_at(0) : parent_vec->get_at(elem_index);
+                            }
+                            break;
+                        } else if (opt_parent->type() == coFloatsOrPercents) {
+                            // Vector parent with percent support: extract the FloatOrPercent for the current extruder.
+                            const ConfigOptionFloatsOrPercentsNullable *parent_nullable = dynamic_cast<const ConfigOptionFloatsOrPercentsNullable *>(opt_parent);
+                            if (parent_nullable) {
+                                const FloatOrPercent &parent_fop = (parent_nullable->size() == 1) ? parent_nullable->get_at(0) : parent_nullable->get_at(elem_index);
+                                if (! parent_fop.percent) {
+                                    v *= parent_fop.value;
+                                    break;
+                                }
+                                v *= parent_fop.value * 0.01; // percent to ratio
+                            } else {
+                                const ConfigOptionFloatsOrPercents *parent_vec = static_cast<const ConfigOptionFloatsOrPercents *>(opt_parent);
+                                const FloatOrPercent &parent_fop = (parent_vec->size() == 1) ? parent_vec->get_at(0) : parent_vec->get_at(elem_index);
+                                if (! parent_fop.percent) {
+                                    v *= parent_fop.value;
+                                    break;
+                                }
+                                v *= parent_fop.value * 0.01; // percent to ratio
+                            }
+                        }
+                        // Continue one level up in the "ratio_over" hierarchy.
+                        opt_def = print_config_def.get(opt_def->ratio_over);
+                        assert(opt_def != nullptr);
+                    }
+                    output.set_d(v);
+                }
+            };
+
             if (!opt.has_index()) {
                 // Allow omitting extruder id when referencing vectors
                 switch (opt.opt->type()) {
                 case coFloats: {
-                    const ConfigOptionFloatsNullable* opt_floatsnullable = static_cast<const ConfigOptionFloatsNullable *>(opt.opt);
+                    const ConfigOptionFloatsNullable* opt_floatsnullable = dynamic_cast<const ConfigOptionFloatsNullable *>(opt.opt);
                     if (opt_floatsnullable) {
                         if (opt_floatsnullable->size() == 1) { // old version
-                            output.set_d(static_cast<const ConfigOptionFloatsNullable*>(opt.opt)->get_at(0));
+                            output.set_d(opt_floatsnullable->get_at(0));
                         } else {
-                            output.set_d(static_cast<const ConfigOptionFloatsNullable*>(opt.opt)->get_at(ctx->get_extruder_id()));
+                            output.set_d(opt_floatsnullable->get_at(ctx->get_extruder_id()));
                         }
                     } else {
                         const ConfigOptionFloats* opt_floats = static_cast<const ConfigOptionFloats*>(opt.opt);
                         if (opt_floats->size() == 1) { // old version
-                            output.set_d(static_cast<const ConfigOptionFloats*>(opt.opt)->get_at(0));
+                            output.set_d(opt_floats->get_at(0));
                         } else {
-                            output.set_d(static_cast<const ConfigOptionFloats*>(opt.opt)->get_at(ctx->get_extruder_id()));
+                            output.set_d(opt_floats->get_at(ctx->get_extruder_id()));
                         }
                     }
                     break;
                 }
+                case coFloatsOrPercents: {
+                    const ConfigOptionFloatsOrPercentsNullable *opt_vec_nullable = dynamic_cast<const ConfigOptionFloatsOrPercentsNullable *>(opt.opt);
+                    if (opt_vec_nullable) {
+                        size_t elem_index = (opt_vec_nullable->size() == 1) ? 0 : ctx->get_extruder_id();
+                        resolve_float_or_percent(opt_vec_nullable->get_at(elem_index), elem_index);
+                    } else {
+                        const ConfigOptionFloatsOrPercents *opt_vec = static_cast<const ConfigOptionFloatsOrPercents *>(opt.opt);
+                        size_t elem_index = (opt_vec->size() == 1) ? 0 : ctx->get_extruder_id();
+                        resolve_float_or_percent(opt_vec->get_at(elem_index), elem_index);
+                    }
+                    break;
+                }
                 default: ctx->throw_exception("Referencing a vector variable when scalar is expected", opt.it_range);
                 }
             } else {
@@ -1131,6 +1215,15 @@ namespace client
                 case coPoints:   output.set_s(to_string(static_cast<const ConfigOptionPoints*>(opt.opt)->values[idx])); break;
                 case coBools:    output.set_b(static_cast<const ConfigOptionBools*>(opt.opt)->values[idx] != 0); break;
                 case coEnums:    output.set_i(static_cast<const ConfigOptionInts    *>(opt.opt)->values[idx]); break;
+                case coFloatsOrPercents: {
+                    const ConfigOptionFloatsOrPercentsNullable *opt_vec_nullable = dynamic_cast<const ConfigOptionFloatsOrPercentsNullable *>(opt.opt);
+                    if (opt_vec_nullable) {
+                        resolve_float_or_percent(opt_vec_nullable->values[idx], idx);
+                    } else {
+                        resolve_float_or_percent(static_cast<const ConfigOptionFloatsOrPercents *>(opt.opt)->values[idx], idx);
+                    }
+                    break;
+                }
                 default:
                     ctx->throw_exception("Unsupported vector variable type", opt.it_range);
                 }

src/libslic3r/PrintBase.cpp

@@ -21,11 +21,12 @@ void PrintTryCancel::operator()()
 
 size_t PrintStateBase::g_last_timestamp = 0;
 
-// Update "scale", "input_filename", "input_filename_base" placeholders from the current m_objects.
+// Update "scale", "input_filename", "input_filename_base", "first_object_name" placeholders from the current m_objects.
 void PrintBase::update_object_placeholders(DynamicConfig &config, const std::string &default_ext) const
 {
     // get the first input file name
     std::string input_file;
+    std::string first_object_name;
     std::vector<std::string> v_scale;
     int num_objects = 0;
     int num_instances = 0;
@@ -38,6 +39,8 @@ void PrintBase::update_object_placeholders(DynamicConfig &config, const std::str
 			}
 		if (printable) {
             ++ num_objects;
+	        if (num_objects == 1)
+	            first_object_name = model_object->name;
 	        // CHECK_ME -> Is the following correct ?
 			v_scale.push_back("x:" + boost::lexical_cast<std::string>(printable->get_scaling_factor(X) * 100) +
 				"% y:" + boost::lexical_cast<std::string>(printable->get_scaling_factor(Y) * 100) +
@@ -51,6 +54,7 @@ void PrintBase::update_object_placeholders(DynamicConfig &config, const std::str
     config.set_key_value("num_instances", new ConfigOptionInt(num_instances));
 
     config.set_key_value("scale", new ConfigOptionStrings(v_scale));
+    config.set_key_value("first_object_name", new ConfigOptionString(first_object_name));
     if (! input_file.empty()) {
         // get basename with and without suffix
         const std::string input_filename = boost::filesystem::path(input_file).filename().string();

src/libslic3r/Utils.hpp

@@ -194,6 +194,7 @@ std::string debug_out_path(const char *name, ...);
 // smaller level means less log. level=5 means saving all logs.
 void set_log_path_and_level(const std::string& file, unsigned int level);
 void flush_logs();
+void shutdown_console_logging();
 boost::filesystem::path get_log_file_name();
 
 // A special type for strings encoded in the local Windows 8-bit code page.

src/libslic3r/utils.cpp

@@ -5,6 +5,7 @@
 #include <locale>
 #include <ctime>
 #include <cstdarg>
+#include <iostream>
 #include <stdio.h>
 #include <filesystem>
 
@@ -46,14 +47,19 @@
 #include <boost/log/core.hpp>
 #include <boost/log/trivial.hpp>
 #include <boost/log/expressions.hpp>
+#include <boost/log/sinks/async_frontend.hpp>
 #include <boost/log/sinks/text_file_backend.hpp>
+#include <boost/log/sinks/text_ostream_backend.hpp>
 #include <boost/log/utility/setup/file.hpp>
 #include <boost/log/utility/setup/common_attributes.hpp>
 #include <boost/log/sources/severity_logger.hpp>
 #include <boost/log/sources/record_ostream.hpp>
 #include <boost/log/support/date_time.hpp>
 
+#include <boost/core/null_deleter.hpp>
 #include <boost/locale.hpp>
+#include <boost/make_shared.hpp>
+#include <boost/shared_ptr.hpp>
 
 #include <boost/algorithm/string/predicate.hpp>
 #include <boost/filesystem.hpp>
@@ -174,6 +180,7 @@ unsigned get_logging_level()
 }
 
 boost::shared_ptr<boost::log::sinks::synchronous_sink<boost::log::sinks::text_file_backend>> g_log_sink;
+boost::shared_ptr<boost::log::sinks::asynchronous_sink<boost::log::sinks::text_ostream_backend>> g_console_log_sink;
 
 // Force set_logging_level(<=error) after loading of the DLL.
 // This is currently only needed if libslic3r is loaded as a shared library into Perl interpreter
@@ -346,6 +353,19 @@ namespace src = boost::log::sources;
 namespace expr = boost::log::expressions;
 namespace keywords = boost::log::keywords;
 namespace attrs = boost::log::attributes;
+namespace sinks = boost::log::sinks;
+
+void shutdown_console_logging()
+{
+	if (!g_console_log_sink)
+		return;
+
+	auto console_sink = g_console_log_sink;
+	boost::log::core::get()->remove_sink(console_sink);
+	console_sink->stop();
+	g_console_log_sink.reset();
+}
+
 void set_log_path_and_level(const std::string& file, unsigned int level)
 {
 #ifdef __APPLE__
@@ -377,6 +397,24 @@ void set_log_path_and_level(const std::string& file, unsigned int level)
 		keywords::auto_flush = true
 	);
 
+	shutdown_console_logging();
+
+#ifdef SLIC3R_CONSOLE_LOG
+	auto console_backend = boost::make_shared<sinks::text_ostream_backend>();
+	console_backend->add_stream(boost::shared_ptr<std::ostream>(&std::cout, boost::null_deleter()));
+	console_backend->auto_flush(true);
+
+	g_console_log_sink = boost::make_shared<sinks::asynchronous_sink<sinks::text_ostream_backend>>(console_backend);
+	g_console_log_sink->set_formatter(
+		expr::stream
+		<< "[" << expr::attr< logging::trivial::severity_level >("Severity") << "]\t"
+		<< expr::format_date_time< boost::posix_time::ptime >("TimeStamp", "%Y-%m-%d %H:%M:%S.%f") << " "
+		<<"[Thread " << expr::attr<attrs::current_thread_id::value_type>("ThreadID") << "]"
+		<< ": " << expr::smessage
+	);
+	boost::log::core::get()->add_sink(g_console_log_sink);
+#endif
+
 	logging::add_common_attributes();
 
 	set_logging_level(level);

src/slic3r/GUI/GUI_App.cpp

@@ -1472,8 +1472,32 @@ int GUI_App::install_plugin(std::string name, std::string package_name, InstallP
                 boost::filesystem::create_directories(dest_path.parent_path());
                 std::string dest_zip_file = encode_path(dest_path.string().c_str());
                 try {
-                    if (fs::exists(dest_path))
+                    if (fs::exists(dest_path)) {
-                        fs::remove(dest_path);
+                        boost::system::error_code ec;
+                        fs::remove(dest_path, ec);
+                        if (ec) {
+                            // On Windows a currently-loaded DLL (e.g. BambuSource.dll, or the
+                            // networking library in legacy mode) cannot be deleted or overwritten
+                            // in place, which failed the whole install with "The plug-in file may
+                            // be in use" (issue #14373). It CAN however be renamed aside: the
+                            // running module keeps mapping the renamed file while we write the new
+                            // one. The stale ".old" copy is cleared on the next install/launch.
+                            boost::filesystem::path aside = dest_path;
+                            aside += ".old";
+                            boost::system::error_code ec2;
+                            fs::remove(aside, ec2);
+                            fs::rename(dest_path, aside, ec2);
+                            if (ec2) {
+                                close_zip_reader(&archive);
+                                BOOST_LOG_TRIVIAL(error) << "[install_plugin] cannot replace in-use file "
+                                                         << dest_path.string() << ": " << ec2.message();
+                                if (pro_fn) { pro_fn(InstallStatusUnzipFailed, 0, cancel); }
+                                return InstallStatusUnzipFailed;
+                            }
+                            BOOST_LOG_TRIVIAL(warning) << "[install_plugin] " << dest_path.filename().string()
+                                                       << " was in use, renamed aside to .old";
+                        }
+                    }
                     mz_bool res = 0;
 #ifndef WIN32
                     if (S_ISLNK(stat.m_external_attr >> 16)) {
@@ -2259,6 +2283,7 @@ GUI_App::~GUI_App()
 
 
     BOOST_LOG_TRIVIAL(info) << __FUNCTION__<< boost::format(": exit");
+    shutdown_console_logging();
 }
 
 bool GUI_App::is_blocking_printing(MachineObject *obj_)
@@ -3473,6 +3498,26 @@ void GUI_App::copy_network_if_available()
 
 bool GUI_App::on_init_network(bool try_backup)
 {
+    // Clean up stale ".old" files left by install_plugin() when it had to rename an in-use
+    // DLL aside (see the rename-aside path in install_plugin). This runs before the plug-in
+    // is (re)loaded - at startup nothing is mapped yet, and on a hot reload the previous
+    // module has already been unloaded - so the previously locked files can now be removed.
+    {
+        boost::filesystem::path plugin_folder = boost::filesystem::path(data_dir()) / "plugins";
+        boost::system::error_code ec;
+        if (boost::filesystem::is_directory(plugin_folder, ec)) {
+            for (boost::filesystem::directory_iterator it(plugin_folder, ec), end; !ec && it != end; it.increment(ec)) {
+                if (it->path().extension() == ".old") {
+                    boost::system::error_code rm_ec;
+                    boost::filesystem::remove(it->path(), rm_ec);
+                    if (rm_ec)
+                        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": could not remove stale " << it->path().filename().string()
+                                                << " (" << rm_ec.message() << "), will retry next launch";
+                }
+            }
+        }
+    }
+
     auto should_load_networking_plugin = app_config->get_bool("installed_networking");
 
     std::string config_version = app_config->get_network_plugin_version();

src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp

@@ -91,9 +91,14 @@ Vec3d GLGizmoMeasure::get_feature_offset(const Measure::SurfaceFeature &feature)
     }
     case Measure::SurfaceFeatureType::Edge:
     {
-        std::optional<Vec3d> p = feature.get_extra_point();
+        // Only polygon edges store an extra point (the polygon centre); plain edges have none.
-        assert(p.has_value());
+        const std::optional<Vec3d> extra = feature.get_extra_point();
-        ret = *p;
+        if (extra.has_value())
+            ret = *extra;
+        else {
+            const auto [pt1, pt2] = feature.get_edge();
+            ret = 0.5 * (pt1 + pt2);
+        }
         break;
     }
     case Measure::SurfaceFeatureType::Point:
@@ -1065,7 +1070,7 @@ void GLGizmoMeasure::on_render()
 
         if (requires_raycaster_update) {
             if (m_gripper_id_raycast_map.find(GripperType::SPHERE_2) != m_gripper_id_raycast_map.end()) {
-                m_gripper_id_raycast_map[GripperType::SPHERE_2]->set_transform(Geometry::translation_transform(get_feature_offset(*m_selected_features.first.feature)) *
+                m_gripper_id_raycast_map[GripperType::SPHERE_2]->set_transform(Geometry::translation_transform(get_feature_offset(*m_selected_features.second.feature)) *
                                                                                Geometry::scale_transform(inv_zoom));
             }
         }

src/slic3r/GUI/Selection.cpp

@@ -535,6 +535,9 @@ void Selection::drop()
 
     for (unsigned int i : m_list) {
         GLVolume&    volume = *(*m_volumes)[i];
+        // Skip the wipe tower: its synthetic id (>= 1000) is not an index into m_model->objects.
+        if (volume.object_idx() >= 1000)
+            continue;
         ModelObject* model_object = m_model->objects[volume.object_idx()];
 
         if (model_object != nullptr) {
@@ -1848,6 +1851,9 @@ void Selection::notify_instance_update(int object_idx, int instance_idx)
         for (unsigned int i : m_list)
         {
             int obj_index = (*m_volumes)[i]->object_idx();
+            // Skip the wipe tower: its synthetic id (>= 1000) is not an index into m_model->objects.
+            if (obj_index >= 1000)
+                continue;
             //-1 means all the instance in this object
             if (instance_idx == -1)
             {

tests/fff_print/test_print.cpp

@@ -183,6 +183,74 @@ void trigger_precise_wall_warning(DynamicPrintConfig& c)
 
 } // namespace
 
+// ---------------------------------------------------------------------------
+// {first_object_name} filename placeholder
+// ---------------------------------------------------------------------------
+namespace {
+
+// Add a printable 20mm cube named `name` to `model`; returns it so the caller can tweak it.
+ModelObject* add_named_cube(Model& model, const std::string& name)
+{
+    ModelObject* obj = model.add_object();
+    obj->name = name;
+    obj->add_volume(make_cube(20.0, 20.0, 20.0));
+    obj->add_instance();
+    obj->ensure_on_bed();
+    return obj;
+}
+
+// Resolve `format` to an output file name for a print of `model`. `filename_base`, when set,
+// is the saved-project name passed to output_filename().
+std::string resolved_output_name(Model& model, const std::string& format, const std::string& filename_base = {})
+{
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+    config.set_key_value("filename_format", new ConfigOptionString(format));
+
+    Print print;
+    for (ModelObject* obj : model.objects)
+        print.auto_assign_extruders(obj);
+    print.apply(model, config);
+    return print.output_filename(filename_base);
+}
+
+} // namespace
+
+TEST_CASE("Print: {first_object_name} names the first printable object on the plate", "[Print]")
+{
+    Model model;
+
+    SECTION("uses the object's name") {
+        add_named_cube(model, "WidgetPart");
+        CHECK(resolved_output_name(model, "{first_object_name}") == "WidgetPart.gcode");
+    }
+
+    SECTION("picks the first when several objects are printable") {
+        add_named_cube(model, "FirstPart");
+        add_named_cube(model, "SecondPart");
+        CHECK(resolved_output_name(model, "{first_object_name}") == "FirstPart.gcode");
+    }
+
+    SECTION("skips objects outside the print volume (e.g. on another plate)") {
+        // First in model order, but not on the current plate, so is_printable() is false.
+        add_named_cube(model, "OtherPlatePart")->instances.front()->print_volume_state = ModelInstancePVS_Fully_Outside;
+        add_named_cube(model, "OnPlatePart");
+        CHECK(resolved_output_name(model, "{first_object_name}") == "OnPlatePart.gcode");
+    }
+
+    SECTION("is empty when the object has no name") {
+        add_named_cube(model, "");
+        CHECK(resolved_output_name(model, "part_{first_object_name}") == "part_.gcode");
+    }
+}
+
+TEST_CASE("Print: {first_object_name} is not replaced by the saved-project file name", "[Print]")
+{
+    // Passing a saved-project file name as the filename_base must not change {first_object_name}.
+    Model model;
+    add_named_cube(model, "WidgetPart");
+    CHECK(resolved_output_name(model, "{first_object_name}", "SavedProject") == "WidgetPart.gcode");
+}
+
 TEST_CASE("Print::validate stacks independent warnings", "[Print][validate]")
 {
     // Two unrelated checks (region precise-wall + machine acceleration) must each

tests/libslic3r/test_placeholder_parser.cpp

@@ -11,8 +11,8 @@ SCENARIO("Placeholder parser scripting", "[PlaceholderParser]") {
 
     config.set_deserialize_strict( {
 	    { "printer_notes", "  PRINTER_VENDOR_PRUSA3D  PRINTER_MODEL_MK2  " },
-	    { "nozzle_diameter", "0.6;0.6;0.6;0.6" },
+	    { "nozzle_diameter", "0.6,0.6,0.6,0.6" },
-	    { "nozzle_temperature", "357;359;363;378" }
+	    { "nozzle_temperature", "357,359,363,378" }
 	});
     // To test the "min_width_top_surface" over "inner_wall_line_width".
     config.option<ConfigOptionFloatOrPercent>("inner_wall_line_width")->value = 150.;
@@ -121,8 +121,8 @@ SCENARIO("Placeholder parser variables", "[PlaceholderParser]") {
     config.set_deserialize_strict({
         { "filament_notes", "testnotes" },
         { "enable_pressure_advance", "1" },
-        { "nozzle_diameter", "0.6;0.6;0.6;0.6" },
+        { "nozzle_diameter", "0.6,0.6,0.6,0.6" },
-        { "nozzle_temperature", "357;359;363;378" }
+        { "nozzle_temperature", "357,359,363,378" }
         });
 
     PlaceholderParser::ContextData context_with_global_dict;
@@ -241,3 +241,97 @@ SCENARIO("Placeholder parser variables", "[PlaceholderParser]") {
     }
     SECTION("if else completely empty") { REQUIRE(parser.process("{if false then elsif false then else endif}", 0, nullptr, nullptr, nullptr) == ""); }
 }
+
+SCENARIO("Placeholder parser coFloatsOrPercents vector access", "[PlaceholderParser]") {
+    PlaceholderParser parser;
+    auto config = DynamicPrintConfig::full_print_config();
+
+    // outer_wall_speed is the ratio_over target for small_perimeter_speed.
+    // Different values per extruder to verify parent resolves at the same element index.
+    config.set_deserialize_strict({
+        { "outer_wall_speed", "60,70,80,90" },
+        { "nozzle_diameter", "0.4,0.4,0.4,0.4" },
+        { "pressure_advance", "1.5,2.0,3.0,4.0" }  // coFloats non-nullable
+    });
+    // small_perimeter_speed:
+    //   [0] = 50% of outer_wall_speed[0] (= 60) → 30
+    //   [1] = 80% of outer_wall_speed[1] (= 70) → 56
+    //   [2] = 0 absolute
+    //   [3] = 50% of outer_wall_speed[3] (= 90) → 45
+    config.option<ConfigOptionFloatsOrPercentsNullable>("small_perimeter_speed")->values = {
+        FloatOrPercent{50.0, true},    // 50% of outer_wall_speed[0] (60) = 30
+        FloatOrPercent{80.0, true},    // 80% of outer_wall_speed[1] (70) = 56
+        FloatOrPercent{0.0, false},    // absolute: 0
+        FloatOrPercent{50.0, true},    // 50% of outer_wall_speed[3] (90) = 45
+    };
+
+    parser.apply_config(config);
+    parser.set("foo", 0);
+    parser.set("bar", 1);
+    parser.set("baz", 3);
+    parser.set("num_extruders", 4);
+
+    SECTION("Indexed access - percent resolved against parent at same index [0]") {
+        // 50% of outer_wall_speed[0] (60) = 30
+        REQUIRE(std::stod(parser.process("{small_perimeter_speed[0]}")) == Catch::Approx(30.0));
+    }
+
+    SECTION("Indexed access - percent resolved against parent at same index [1]") {
+        // 80% of outer_wall_speed[1] (70) = 56
+        REQUIRE(std::stod(parser.process("{small_perimeter_speed[1]}")) == Catch::Approx(56.0));
+    }
+
+    SECTION("Indexed access - percent resolved against parent at same index [3]") {
+        // 50% of outer_wall_speed[3] (90) = 45
+        REQUIRE(std::stod(parser.process("{small_perimeter_speed[3]}")) == Catch::Approx(45.0));
+    }
+
+    SECTION("Variable-indexed access via foo (=0) - percent value") {
+        // 50% of outer_wall_speed[0] (60) = 30
+        REQUIRE(std::stod(parser.process("{small_perimeter_speed[foo]}")) == Catch::Approx(30.0));
+    }
+
+    SECTION("Variable-indexed access via bar (=1) - percent value") {
+        // 80% of outer_wall_speed[1] (70) = 56
+        REQUIRE(std::stod(parser.process("{small_perimeter_speed[bar]}")) == Catch::Approx(56.0));
+    }
+
+    SECTION("Variable-indexed access via baz (=3) - percent value") {
+        // 50% of outer_wall_speed[3] (90) = 45
+        REQUIRE(std::stod(parser.process("{small_perimeter_speed[baz]}")) == Catch::Approx(45.0));
+    }
+
+    SECTION("Literal-indexed access - absolute value") {
+        REQUIRE(std::stod(parser.process("{small_perimeter_speed[2]}")) == Catch::Approx(0.0));
+    }
+
+    SECTION("No-index (extruder-based) access - percent resolved via current extruder") {
+        // Extruder 0 = 50% of outer_wall_speed[0] (60) = 30
+        REQUIRE(std::stod(parser.process("{small_perimeter_speed}")) == Catch::Approx(30.0));
+    }
+
+    SECTION("Out-of-range index clamps to index 0") {
+        // Index 99 is out of range, clamps to 0: 50% of outer_wall_speed[0] (60) = 30
+        REQUIRE(std::stod(parser.process("{small_perimeter_speed[99]}")) == Catch::Approx(30.0));
+    }
+
+    SECTION("coFloats no-index access - nullable (outer_wall_speed)") {
+        // outer_wall_speed is ConfigOptionFloatsNullable, exercises the 'if' branch
+        REQUIRE(std::stod(parser.process("{outer_wall_speed}")) == Catch::Approx(60.0));
+    }
+
+    SECTION("coFloats indexed access - nullable") {
+        // outer_wall_speed[2] = 80
+        REQUIRE(std::stod(parser.process("{outer_wall_speed[2]}")) == Catch::Approx(80.0));
+    }
+
+    SECTION("coFloats no-index access - non-nullable (pressure_advance)") {
+        // pressure_advance is ConfigOptionFloats (non-nullable), exercises the 'else' branch
+        REQUIRE(std::stod(parser.process("{pressure_advance}")) == Catch::Approx(1.5));
+    }
+
+    SECTION("coFloats indexed access - non-nullable") {
+        // pressure_advance[2] = 3.0
+        REQUIRE(std::stod(parser.process("{pressure_advance[2]}")) == Catch::Approx(3.0));
+    }
+}