juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-09-11 02:57:39 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated parameters and tooltip following testing.

Browse Source
This commit is contained in:
igiannakas
2023-09-24 15:02:27 +01:00
parent 79778ee297
commit 1edf49f851
1 changed files with 6 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

11
src/libslic3r/PrintConfig.cpp
View File

@@ -2478,9 +2478,10 @@ def = this->add("filament_loading_speed", coFloats);
"It defines the maximum rate by which the extruded volumetric flow in mm3/sec can change over time. " "It defines the maximum rate by which the extruded volumetric flow in mm3/sec can change over time. "
"Higher values mean higher extrusion rate changes are allowed, resulting in faster speed transitions.\n\n" "Higher values mean higher extrusion rate changes are allowed, resulting in faster speed transitions.\n\n"
"A value of 0 disables the feature. \n\n" "A value of 0 disables the feature. \n\n"
"For a high speed, high flow direct drive printer (like the Bambu lab or Voron) a sensible value is around" "For a high speed, high flow direct drive printer (like the Bambu lab or Voron) this value is usually not needed. "
"300-400mm3/s2. This allows for just enough smoothing to assist pressure advance in " "However it can provide some marginal benefit in certain cases where feature speeds vary greatly. For example, "
"areas where sudden flow changes happen. \n\n" "when there are aggressive slowdowns due to overhangs. In these cases a high value of around 300-350mm3/s2 is "
"recommended as this allows for just enough smoothing to assist pressure advance achieve a smoother flow transition.\n\n"
"For slower printers without pressure advance, the value should be set much lower. A value of 10-15mm3/s2 is a " "For slower printers without pressure advance, the value should be set much lower. A value of 10-15mm3/s2 is a "
"good starting point for direct drive extruders and 5-10mm3/s2 for Bowden style. \n\n" "good starting point for direct drive extruders and 5-10mm3/s2 for Bowden style. \n\n"
"This feature is known as Pressure Equalizer in Prusa slicer.\n\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n\n"
@@ -2494,12 +2495,12 @@ def = this->add("filament_loading_speed", coFloats);
def->label = L("Smoothing segment length"); def->label = L("Smoothing segment length");
def->tooltip = L("A lower value results in smoother extrusion rate transitions. However, this results in a significantly larger gcode file " def->tooltip = L("A lower value results in smoother extrusion rate transitions. However, this results in a significantly larger gcode file "
"and more instructions for the printer to process. \n\n" "and more instructions for the printer to process. \n\n"
"Default value of 1 works well for most cases. If your printer is stuttering, increase this value to reduce the number of adjustments made\n\n" "Default value of 3 works well for most cases. If your printer is stuttering, increase this value to reduce the number of adjustments made\n\n"
"Allowed values: 1-5"); "Allowed values: 1-5");
def->min = 1; def->min = 1;
def->max = 5; def->max = 5;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(1)); def->set_default_value(new ConfigOptionInt(3));
def = this->add("fan_min_speed", coInts); def = this->add("fan_min_speed", coInts);
def->label = L("Fan speed"); def->label = L("Fan speed");