juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-07-16 23:42:11 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated parameters and tooltip following testing.

Browse Source
This commit is contained in:
igiannakas
2023-09-24 15:02:27 +01:00
parent 79778ee297
commit 1edf49f851
1 changed files with 6 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

11
src/libslic3r/PrintConfig.cpp
View File

@@ -2478,9 +2478,10 @@ def = this->add("filament_loading_speed", coFloats);
"It defines the maximum rate by which the extruded volumetric flow in mm3/sec can change over time. "
"Higher values mean higher extrusion rate changes are allowed, resulting in faster speed transitions.\n\n"
"A value of 0 disables the feature. \n\n"
"For a high speed, high flow direct drive printer (like the Bambu lab or Voron) a sensible value is around"
"300-400mm3/s2. This allows for just enough smoothing to assist pressure advance in "
"areas where sudden flow changes happen. \n\n"
"For a high speed, high flow direct drive printer (like the Bambu lab or Voron) this value is usually not needed. "
"However it can provide some marginal benefit in certain cases where feature speeds vary greatly. For example, "
"when there are aggressive slowdowns due to overhangs. In these cases a high value of around 300-350mm3/s2 is "
"recommended as this allows for just enough smoothing to assist pressure advance achieve a smoother flow transition.\n\n"
"For slower printers without pressure advance, the value should be set much lower. A value of 10-15mm3/s2 is a "
"good starting point for direct drive extruders and 5-10mm3/s2 for Bowden style. \n\n"
"This feature is known as Pressure Equalizer in Prusa slicer.\n\n"
@@ -2494,12 +2495,12 @@ def = this->add("filament_loading_speed", coFloats);
def->label = L("Smoothing segment length");
def->tooltip = L("A lower value results in smoother extrusion rate transitions. However, this results in a significantly larger gcode file "
"and more instructions for the printer to process. \n\n"
"Default value of 1 works well for most cases. If your printer is stuttering, increase this value to reduce the number of adjustments made\n\n"
"Default value of 3 works well for most cases. If your printer is stuttering, increase this value to reduce the number of adjustments made\n\n"
"Allowed values: 1-5");
def->min = 1;
def->max = 5;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(1));
def->set_default_value(new ConfigOptionInt(3));
def = this->add("fan_min_speed", coInts);
def->label = L("Fan speed");