mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-04 22:31:02 +00:00
CoreOne INDX 8T and 4T: welcome to earth, MMU3 fixes (#15903)
* Add opt-in printer overrides for filament tool-change settings Allow printer presets to define uniform ramming, loading, unloading, cooling, purge, filament scripts and pressure-advance enable settings without duplicating material presets. Apply overrides during preset composition and FDM normalization, and expose the switch in Multimaterial. Keep the feature disabled by default. Omitted or empty override vectors preserve material settings; a single value applies to every filament, including an explicitly empty script. Reject multi-value overrides. Preserve empty float vectors across project serialization and initialize empty nullable filament overrides before resizing them, preventing preset cache generation from accessing an empty vector. Include focused override tests and document the configuration semantics, Prusa MMU3 integration and INDX tool-change behavior. Co-authored-by: Codex <codex@openai.com> * Add Prusa MMU3 and CORE One INDX profiles with shared material tuning Add MK4 MMU3 and four-tool/eight-tool CORE One INDX printer definitions, process presets and printer resources. Reuse ordinary MK4 and CORE One printer/process inheritance while retaining device-specific startup, shutdown, tool-change and wipe-tower behavior. Move uniform MMU3 tip forming and INDX handling into machine filament overrides. Keep MMU3 pressure advance and purge material-specific, retain INDX material tuning, and share surviving materials with migration aliases for retired MMU3 and XL tool-change copies. Preserve unrelated Prusa filament identities, scalar value formats and inheritance rather than applying broad profile cleanup. Validation: Prusa profile checks and all 69 printer smoke slices passed. The final cleanup preserved emitted commands with identical filament selections. Co-authored-by: Codex <codex@openai.com> * Refresh filament controls after loading printer presets Synchronize the plater filament controls after preset loading, even when the internal filament list already matches the nozzle count. Co-authored-by: Codex <codex@openai.com> * Fix nullable Z-hop overrides in Prusa filament variants Represent empty overrides as nil for each inherited extruder variant so the native profile loader preserves machine Z-hop settings. Validation: full profile checks, native loading, and 1,115-printer slicing sweep passed. Co-authored-by: Codex <codex@openai.com> * Separate Prusa profiles from machine-owned filament overrides Retain profile tuning without unsupported machine override keys. Move supporting code, tests and override documentation into a separate feature change. Co-authored-by: Codex <codex@openai.com> * Default INDX tools to hardened high-flow nozzles Use the High Flow variant for every INDX tool and its dedicated filament presets. Raise Generic PLA throughput to 28 mm3/s. Co-authored-by: codex <codex@openai.com> * Use normal filament-change lifts for INDX and MMU3 Avoid duplicate INDX retraction and account for its 12.5-second dock swap in print estimates. Co-authored-by: codex <codex@openai.com> * Set z_hop_types for the machine too * Fix profile check failures in the Prusa CORE One filament presets --------- Co-authored-by: Codex <codex@openai.com> Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com> Co-authored-by: SoftFever <softfeverever@gmail.com>
This commit is contained in:
Eric McCann
co-authored by
Codex
SoftFever
SoftFever
Codex
SoftFever
SoftFever
parent
78a4f2867c
commit
000f8abc6d
@@ -0,0 +1,54 @@
|
||||
# Prusa CORE One INDX profiles
|
||||
|
||||
The Prusa bundle provides separate four-tool and eight-tool CORE One INDX models
|
||||
with 0.4 mm high-flow nozzles and a 248 x 205 x 270 mm printable volume. These are
|
||||
independent-tool printers, not single-extruder MMU3 machines. Both inherit
|
||||
`fdm_machine_common_coreone_indx`, which inherits the ordinary CORE One HF
|
||||
printer; the concrete printer presets supply their tool-count-dependent arrays. The bed and wizard resources come from Prusa.
|
||||
|
||||
The source configuration is PrusaResearch 2.5.10 from
|
||||
[Prusa's profile repository](https://github.com/prusa3d/PrusaSlicer-settings-prusa-fff/blob/65c5c8f1e1c3836f306119c49d717759cbc368db/PrusaResearch/2.5.10.ini).
|
||||
Its printer, process and filament settings are translated to Orca option names.
|
||||
The supplied process presets cover 0.10, 0.15, 0.20 and 0.25 mm layers. Their
|
||||
shared `fdm_process_coreone_indx` base inherits the ordinary CORE One HF SPEED
|
||||
process, with explicit INDX differences and layer-specific child settings.
|
||||
Material presets are shared with the ordinary CORE One family.
|
||||
|
||||
## Tool changes and extrusion state
|
||||
|
||||
The start script initializes a persistent `tool_init` vector, counts the tools
|
||||
used by the job, homes and probes using a loaded tool, calibrates the used tools,
|
||||
and primes the initial tool at the cleaning station. The change script preserves
|
||||
Prusa's `G27`, `P0`, `T`, `G12`, `G750` and `M906` sequences. It updates
|
||||
`e_retracted` so Orca's subsequent unretraction agrees with the script's extrusion.
|
||||
Per-tool temperature commands are guarded by `is_extruder_used`.
|
||||
|
||||
The off-bed purge station is the default. With a prime tower enabled, a newly
|
||||
used tool still receives its initial station purge, while an initialized tool
|
||||
uses the source's wipe-tower preparation path. `tool_init` persists across these
|
||||
changes; treating every tool selection as first use would change the purge and
|
||||
deretraction sequence.
|
||||
|
||||
Purge volume uses the filament's minimal purge setting. Orca's optional flush
|
||||
volumetric speed is divided by filament cross-sectional area before it is used
|
||||
as a linear extrusion-speed override. Prusa's separate `filament_flush_volume`
|
||||
override is not available in these profiles. The source's `EXCLUDE_E_START` and
|
||||
`EXCLUDE_E_END` internal markers become comments rather than printer commands.
|
||||
|
||||
Pressure-advance restoration and automatic pressure-advance emission use the
|
||||
selected filament preset's settings. These profiles do not impose machine-owned
|
||||
filament overrides. Dock-fan control retains the source's material and layer
|
||||
conditions; shutdown parks the tool and turns off the used heaters and dock fan.
|
||||
|
||||
## Configuration boundaries
|
||||
|
||||
The scripts use Orca's temperature, retraction, fan and speed option names. The
|
||||
nozzle-check high-flow flag is fixed because these presets describe HF nozzles;
|
||||
the abrasive-material flag is derived from the filament's required nozzle HRC.
|
||||
An unset idle temperature uses Orca's zero sentinel. ABS's source XY shrinkage
|
||||
compensation is represented using Orca's retained-size percentage.
|
||||
|
||||
Prusa's consistent-surface cooling strategy and filament-specific infill crossing
|
||||
speed limits have no direct Orca profile equivalent. These presets use Orca's
|
||||
native layer-time cooling and material volumetric limits. They do not add slicer
|
||||
features or change existing Prusa printer profiles.
|
||||
+343
-371
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
After Width: | Height: | Size: 46 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 49 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 60 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 60 KiB |
Binary file not shown.
@@ -0,0 +1,507 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<svg
|
||||
id="svg3128"
|
||||
width="705.80231"
|
||||
height="582.33624"
|
||||
viewBox="0 0 705.80233 582.33623"
|
||||
version="1.1"
|
||||
xml:space="preserve"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"><defs
|
||||
id="defs119"><clipPath
|
||||
clipPathUnits="userSpaceOnUse"
|
||||
id="clipPath121"><path
|
||||
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||
transform="translate(-422.26871,-18.997898)"
|
||||
id="path121" /></clipPath><clipPath
|
||||
clipPathUnits="userSpaceOnUse"
|
||||
id="clipPath123"><path
|
||||
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||
transform="translate(-415.25041,-14.8056)"
|
||||
id="path123" /></clipPath><clipPath
|
||||
clipPathUnits="userSpaceOnUse"
|
||||
id="clipPath125"><path
|
||||
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||
transform="translate(-262.33801,-23.423903)"
|
||||
id="path125" /></clipPath><clipPath
|
||||
clipPathUnits="userSpaceOnUse"
|
||||
id="clipPath127"><path
|
||||
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||
transform="translate(-276.75361,-23.730301)"
|
||||
id="path127" /></clipPath><clipPath
|
||||
clipPathUnits="userSpaceOnUse"
|
||||
id="clipPath129"><path
|
||||
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||
transform="translate(-303.22041,-20.880601)"
|
||||
id="path129" /></clipPath><clipPath
|
||||
clipPathUnits="userSpaceOnUse"
|
||||
id="clipPath131"><path
|
||||
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||
transform="translate(-308.00361,-20.103398)"
|
||||
id="path131" /></clipPath><clipPath
|
||||
clipPathUnits="userSpaceOnUse"
|
||||
id="clipPath133"><path
|
||||
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||
transform="translate(-324.03941,-21.021803)"
|
||||
id="path133" /></clipPath><clipPath
|
||||
clipPathUnits="userSpaceOnUse"
|
||||
id="clipPath135"><path
|
||||
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||
transform="translate(-350.61111,-25.685003)"
|
||||
id="path135" /></clipPath><clipPath
|
||||
clipPathUnits="userSpaceOnUse"
|
||||
id="clipPath137"><path
|
||||
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||
transform="translate(-358.75971,-22.858898)"
|
||||
id="path137" /></clipPath><clipPath
|
||||
clipPathUnits="userSpaceOnUse"
|
||||
id="clipPath139"><path
|
||||
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||
transform="translate(-376.88051,-23.730301)"
|
||||
id="path139" /></clipPath><clipPath
|
||||
clipPathUnits="userSpaceOnUse"
|
||||
id="clipPath141"><path
|
||||
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||
transform="translate(-389.25391,-31.337401)"
|
||||
id="path141" /></clipPath><clipPath
|
||||
clipPathUnits="userSpaceOnUse"
|
||||
id="clipPath6"><path
|
||||
d="M 0,114.52 H 114.52 V 0 H 0 Z"
|
||||
transform="translate(-35.267201,-32.161503)"
|
||||
id="path6" /></clipPath><clipPath
|
||||
clipPathUnits="userSpaceOnUse"
|
||||
id="clipPath4"><path
|
||||
d="M 0,114.52 H 114.52 V 0 H 0 Z"
|
||||
transform="translate(-61.726601,-60.946602)"
|
||||
id="path4" /></clipPath><clipPath
|
||||
clipPathUnits="userSpaceOnUse"
|
||||
id="clipPath2"><path
|
||||
d="M 0,114.52 H 114.52 V 0 H 0 Z"
|
||||
transform="translate(-70.093402,-32.743901)"
|
||||
id="path2" /></clipPath><clipPath
|
||||
clipPathUnits="userSpaceOnUse"
|
||||
id="clipPath123-3"><path
|
||||
d="M 0,683.556 H 720.393 V 0 H 0 Z"
|
||||
transform="translate(-415.25041,-14.8056)"
|
||||
id="path123-1" /></clipPath></defs><line
|
||||
id="line2794"
|
||||
x1="0.69158316"
|
||||
y1="1.0052254"
|
||||
x2="0.69158316"
|
||||
y2="581.51392"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.38249;stroke-linecap:round;stroke-linejoin:round;stroke-dasharray:none" /><line
|
||||
id="line2796"
|
||||
x1="142.39986"
|
||||
y1="1.040447"
|
||||
x2="142.39986"
|
||||
y2="581.33643"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.38272px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2798"
|
||||
x1="284.1944"
|
||||
y1="0.97073263"
|
||||
x2="284.1944"
|
||||
y2="517.37079"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.30441px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2800"
|
||||
x1="705.11115"
|
||||
y1="581.51416"
|
||||
x2="705.11115"
|
||||
y2="1.1717546"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.38232px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2802"
|
||||
x1="0.76483148"
|
||||
y1="574.50464"
|
||||
x2="254.98537"
|
||||
y2="574.50464"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.48106;stroke-linecap:square;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none" /><line
|
||||
id="line2802-8"
|
||||
x1="454.69971"
|
||||
y1="574.67969"
|
||||
x2="704.44983"
|
||||
y2="574.67969"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.47086;stroke-linecap:square;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none" /><line
|
||||
id="line2806"
|
||||
x1="1.1946371"
|
||||
y1="432.83392"
|
||||
x2="704.92871"
|
||||
y2="432.83392"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.39558px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2808"
|
||||
x1="1.1946371"
|
||||
y1="291.13284"
|
||||
x2="704.92871"
|
||||
y2="291.13284"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.39558px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2810"
|
||||
x1="1.1946371"
|
||||
y1="149.33176"
|
||||
x2="704.92871"
|
||||
y2="149.33176"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.39558px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2812"
|
||||
x1="1.1946371"
|
||||
y1="7.6306887"
|
||||
x2="704.92871"
|
||||
y2="7.6306887"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.39558px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2814"
|
||||
x1="704.92871"
|
||||
y1="0.69779003"
|
||||
x2="0.69779003"
|
||||
y2="0.69779003"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.39558px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2816"
|
||||
x1="425.92963"
|
||||
y1="1.0813043"
|
||||
x2="425.92963"
|
||||
y2="517.22998"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42464px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2820"
|
||||
x1="567.64203"
|
||||
y1="1.198333"
|
||||
x2="567.64203"
|
||||
y2="580.63434"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.50941px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2826"
|
||||
x1="85.799797"
|
||||
y1="1.040447"
|
||||
x2="85.799797"
|
||||
y2="581.62915"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.395059px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2828"
|
||||
x1="114.09982"
|
||||
y1="1.040447"
|
||||
x2="114.09982"
|
||||
y2="581.62915"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.395059px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2830"
|
||||
x1="170.79985"
|
||||
y1="1.040447"
|
||||
x2="170.79985"
|
||||
y2="581.62915"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.395059px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2832"
|
||||
x1="199.0999"
|
||||
y1="1.040447"
|
||||
x2="199.0999"
|
||||
y2="581.62915"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.395059px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2834"
|
||||
x1="227.49991"
|
||||
y1="1.040447"
|
||||
x2="227.49991"
|
||||
y2="581.62915"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.395059px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2836"
|
||||
x1="255.80611"
|
||||
y1="1.0191121"
|
||||
x2="255.80611"
|
||||
y2="581.64233"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.395059px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2838"
|
||||
x1="312.47324"
|
||||
y1="0.98894"
|
||||
x2="312.47324"
|
||||
y2="517.65973"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.37277px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2840"
|
||||
x1="340.88708"
|
||||
y1="0.98894"
|
||||
x2="340.88708"
|
||||
y2="517.65973"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.37277px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2842"
|
||||
x1="681.00024"
|
||||
y1="1.040447"
|
||||
x2="681.00024"
|
||||
y2="581.62915"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.395059px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2844"
|
||||
x1="29.099754"
|
||||
y1="1.040447"
|
||||
x2="29.099754"
|
||||
y2="581.62915"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.395059px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2846"
|
||||
x1="57.399776"
|
||||
y1="1.040447"
|
||||
x2="57.399776"
|
||||
y2="581.62915"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.395059px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2848"
|
||||
x1="1.4993596"
|
||||
y1="461.13318"
|
||||
x2="705.31616"
|
||||
y2="461.13318"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398845px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2850"
|
||||
x1="1.4993596"
|
||||
y1="489.53323"
|
||||
x2="705.31616"
|
||||
y2="489.53323"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398845px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2852"
|
||||
x1="1.4993596"
|
||||
y1="517.83331"
|
||||
x2="705.31616"
|
||||
y2="517.83331"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398845px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2854"
|
||||
x1="1.4994488"
|
||||
y1="546.26221"
|
||||
x2="255.71291"
|
||||
y2="546.26221"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.239459px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2854-9"
|
||||
x1="454.34674"
|
||||
y1="546.2608"
|
||||
x2="704.89508"
|
||||
y2="546.2608"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.237745px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2854-7"
|
||||
x1="1.241616"
|
||||
y1="581.63831"
|
||||
x2="704.92847"
|
||||
y2="581.63831"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.39583;stroke-linecap:round;stroke-linejoin:round;stroke-dasharray:none" /><line
|
||||
id="line2856"
|
||||
x1="1.4993596"
|
||||
y1="404.43311"
|
||||
x2="705.31616"
|
||||
y2="404.43311"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398845px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2858"
|
||||
x1="1.4993596"
|
||||
y1="376.13303"
|
||||
x2="705.31616"
|
||||
y2="376.13303"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398845px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2860"
|
||||
x1="1.4993596"
|
||||
y1="347.73297"
|
||||
x2="705.31616"
|
||||
y2="347.73297"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398845px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2862"
|
||||
x1="1.4993596"
|
||||
y1="319.43292"
|
||||
x2="705.31616"
|
||||
y2="319.43292"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398845px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2864"
|
||||
x1="1.4993596"
|
||||
y1="262.73279"
|
||||
x2="705.31616"
|
||||
y2="262.73279"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398845px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2866"
|
||||
x1="1.4993596"
|
||||
y1="234.33272"
|
||||
x2="705.31616"
|
||||
y2="234.33272"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398845px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2868"
|
||||
x1="1.4993596"
|
||||
y1="206.03267"
|
||||
x2="705.31616"
|
||||
y2="206.03267"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398845px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2870"
|
||||
x1="1.4993596"
|
||||
y1="177.7326"
|
||||
x2="705.31616"
|
||||
y2="177.7326"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398845px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2872"
|
||||
x1="1.4993596"
|
||||
y1="121.03249"
|
||||
x2="705.31616"
|
||||
y2="121.03249"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398845px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2874"
|
||||
x1="1.4993596"
|
||||
y1="92.632431"
|
||||
x2="705.31616"
|
||||
y2="92.632431"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398845px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2876"
|
||||
x1="1.4993596"
|
||||
y1="64.332382"
|
||||
x2="705.31616"
|
||||
y2="64.332382"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398845px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2878"
|
||||
x1="1.4993596"
|
||||
y1="35.932327"
|
||||
x2="705.31616"
|
||||
y2="35.932327"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398845px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2880"
|
||||
x1="369.20102"
|
||||
y1="1.0100164"
|
||||
x2="369.20102"
|
||||
y2="517.6618"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.398085px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2884"
|
||||
x1="397.61444"
|
||||
y1="1.0220113"
|
||||
x2="397.61444"
|
||||
y2="517.72723"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.407256px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2888"
|
||||
x1="454.17535"
|
||||
y1="1.0131878"
|
||||
x2="454.17535"
|
||||
y2="581.49396"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.431975;stroke-linecap:round;stroke-linejoin:round;stroke-dasharray:none" /><line
|
||||
id="line2892"
|
||||
x1="482.61795"
|
||||
y1="1.0739419"
|
||||
x2="482.61795"
|
||||
y2="581.26996"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.431491px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2896"
|
||||
x1="510.92355"
|
||||
y1="1.0739419"
|
||||
x2="510.92355"
|
||||
y2="581.26996"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.431491px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2900"
|
||||
x1="539.32935"
|
||||
y1="1.0739419"
|
||||
x2="539.32935"
|
||||
y2="581.26996"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.431491px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2904"
|
||||
x1="595.96283"
|
||||
y1="1.1090682"
|
||||
x2="595.96283"
|
||||
y2="581.19983"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.43153px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2906"
|
||||
x1="624.27881"
|
||||
y1="1.1090682"
|
||||
x2="624.27881"
|
||||
y2="581.19983"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.43153px;stroke-linecap:round;stroke-linejoin:round" /><line
|
||||
id="line2908"
|
||||
x1="652.7002"
|
||||
y1="1.0677707"
|
||||
x2="652.7002"
|
||||
y2="581.34344"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:0.421819px;stroke-linecap:round;stroke-linejoin:round" /><path
|
||||
id="path120"
|
||||
d="M 0,0 C 0.361,0.533 0.624,1.134 0.789,1.802 0.954,2.469 1.036,3.156 1.036,3.862 1.036,4.6 0.954,5.314 0.789,6.005 0.624,6.696 0.361,7.313 0,7.854 -0.361,8.396 -0.832,8.828 -1.413,9.15 -1.994,9.471 -2.701,9.632 -3.533,9.632 -4.365,9.632 -5.071,9.471 -5.652,9.15 -6.233,8.828 -6.704,8.396 -7.065,7.854 -7.427,7.313 -7.689,6.696 -7.854,6.005 -8.019,5.314 -8.102,4.6 -8.102,3.862 c 0,-0.706 0.083,-1.393 0.248,-2.06 0.165,-0.668 0.427,-1.269 0.789,-1.802 0.361,-0.534 0.832,-0.962 1.413,-1.284 0.581,-0.322 1.287,-0.482 2.119,-0.482 0.832,0 1.539,0.16 2.12,0.482 C -0.832,-0.962 -0.361,-0.534 0,0"
|
||||
style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
transform="matrix(0.91824614,0,0,-0.91824614,411.44812,536.34744)"
|
||||
clip-path="url(#clipPath121)" /><path
|
||||
id="path122"
|
||||
d="m 0,0 c -1.021,0.455 -1.884,1.075 -2.591,1.86 -0.706,0.786 -1.248,1.712 -1.625,2.78 -0.377,1.067 -0.565,2.205 -0.565,3.415 0,1.24 0.188,2.402 0.565,3.485 0.377,1.084 0.919,2.026 1.625,2.826 0.707,0.801 1.57,1.429 2.591,1.884 1.021,0.456 2.182,0.683 3.486,0.683 1.303,0 2.465,-0.227 3.485,-0.683 1.021,-0.455 1.884,-1.083 2.591,-1.884 0.707,-0.8 1.248,-1.742 1.625,-2.826 0.377,-1.083 0.565,-2.245 0.565,-3.485 0,-1.21 -0.188,-2.348 -0.565,-3.415 C 10.81,3.572 10.269,2.646 9.562,1.86 8.855,1.075 7.992,0.455 6.971,0 5.951,-0.455 4.789,-0.683 3.486,-0.683 2.182,-0.683 1.021,-0.455 0,0 M 17.014,16.533 24.032,5.252 h 0.047 v 11.281 h 3.462 V -0.283 H 23.844 L 16.849,10.975 H 16.802 V -0.283 H 13.34 v 16.816 z m 25.501,0 V 13.424 H 33.637 V 9.821 h 8.148 V 6.948 H 33.637 V 2.826 h 9.067 V -0.283 H 29.939 V 16.533 Z M 46.901,-0.89 v 18.028 c 0,1.869 -1.515,3.385 -3.385,3.385 H -5.593 c -1.87,0 -3.385,-1.516 -3.385,-3.385 V -0.89 c 0,-1.87 1.515,-3.386 3.385,-3.386 h 49.109 c 1.87,0 3.385,1.516 3.385,3.386"
|
||||
style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
transform="matrix(0.91824614,0,0,-0.91824614,405.00359,540.197)"
|
||||
clip-path="url(#clipPath123)" /><path
|
||||
id="path124"
|
||||
d="M 0,0 H 2.873 C 3.297,0 3.705,0.031 4.098,0.094 4.49,0.157 4.836,0.279 5.134,0.459 5.432,0.64 5.672,0.895 5.852,1.225 6.033,1.554 6.123,1.986 6.123,2.52 6.123,3.054 6.033,3.486 5.852,3.815 5.672,4.145 5.432,4.4 5.134,4.581 4.836,4.761 4.49,4.883 4.098,4.946 3.705,5.008 3.297,5.04 2.873,5.04 H 0 Z M -3.698,7.913 H 3.886 C 4.938,7.913 5.833,7.76 6.571,7.454 7.308,7.148 7.909,6.744 8.372,6.241 8.835,5.739 9.173,5.161 9.385,4.51 9.597,3.859 9.703,3.195 9.703,2.52 9.703,1.829 9.597,1.162 9.385,0.518 9.173,-0.126 8.835,-0.699 8.372,-1.201 7.909,-1.704 7.308,-2.108 6.571,-2.414 5.833,-2.72 4.938,-2.873 3.886,-2.873 H 0 v -6.029 h -3.698 z"
|
||||
style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
transform="matrix(0.91824614,0,0,-0.91824614,264.59237,532.28327)"
|
||||
clip-path="url(#clipPath125)" /><path
|
||||
id="path126"
|
||||
d="M 0,0 H 4.051 C 4.883,0 5.514,0.188 5.947,0.565 6.378,0.942 6.594,1.554 6.594,2.402 6.594,3.218 6.378,3.811 5.947,4.18 5.514,4.549 4.883,4.734 4.051,4.734 H 0 Z M -3.698,7.607 H 5.37 C 6.123,7.607 6.802,7.485 7.407,7.242 8.011,6.999 8.529,6.665 8.961,6.241 9.393,5.817 9.723,5.322 9.951,4.757 10.178,4.192 10.292,3.595 10.292,2.968 10.292,1.978 10.084,1.122 9.668,0.4 9.252,-0.322 8.573,-0.871 7.63,-1.248 v -0.047 c 0.456,-0.126 0.833,-0.318 1.131,-0.577 0.298,-0.259 0.542,-0.57 0.73,-0.931 0.189,-0.361 0.326,-0.75 0.412,-1.165 0.086,-0.417 0.145,-0.837 0.177,-1.261 0.015,-0.267 0.031,-0.581 0.047,-0.942 0.015,-0.361 0.043,-0.726 0.083,-1.095 0.039,-0.369 0.101,-0.726 0.188,-1.071 0.086,-0.346 0.216,-0.636 0.388,-0.872 H 7.089 C 6.979,-8.942 6.896,-8.648 6.842,-8.326 6.786,-8.004 6.739,-7.666 6.7,-7.313 6.661,-6.96 6.63,-6.599 6.606,-6.229 6.583,-5.861 6.547,-5.511 6.5,-5.181 6.374,-4.302 6.107,-3.659 5.699,-3.25 5.291,-2.842 4.624,-2.638 3.698,-2.638 H 0 v -6.571 h -3.698 z"
|
||||
style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
transform="matrix(0.91824614,0,0,-0.91824614,277.82944,532.00192)"
|
||||
clip-path="url(#clipPath127)" /><path
|
||||
id="path128"
|
||||
d="m 0,0 c 0,-2.277 -0.636,-3.973 -1.908,-5.087 -1.271,-1.115 -3.03,-1.672 -5.275,-1.672 -2.277,0 -4.039,0.553 -5.288,1.66 -1.248,1.107 -1.872,2.806 -1.872,5.099 v 10.457 h 3.698 V 0 c 0,-0.456 0.039,-0.903 0.118,-1.343 0.078,-0.439 0.243,-0.832 0.494,-1.177 0.251,-0.346 0.601,-0.62 1.048,-0.825 0.448,-0.204 1.048,-0.306 1.802,-0.306 1.319,0 2.229,0.295 2.732,0.884 0.502,0.588 0.753,1.511 0.753,2.767 V 10.457 H 0 Z"
|
||||
style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
transform="matrix(0.91824614,0,0,-0.91824614,302.13247,534.61865)"
|
||||
clip-path="url(#clipPath129)" /><path
|
||||
id="path130"
|
||||
d="m 0,0 c 0,-0.565 0.102,-1.045 0.306,-1.437 0.204,-0.392 0.475,-0.71 0.813,-0.954 0.337,-0.243 0.73,-0.424 1.177,-0.541 0.448,-0.118 0.923,-0.177 1.425,-0.177 0.33,0 0.683,0.027 1.06,0.083 0.377,0.054 0.73,0.16 1.06,0.317 0.33,0.157 0.604,0.373 0.824,0.648 0.22,0.275 0.33,0.624 0.33,1.048 0,0.456 -0.146,0.825 -0.436,1.107 C 6.268,0.377 5.888,0.616 5.417,0.812 4.946,1.008 4.412,1.174 3.815,1.307 3.219,1.44 2.614,1.593 2.002,1.766 1.374,1.923 0.762,2.116 0.165,2.343 -0.432,2.571 -0.966,2.865 -1.437,3.227 -1.908,3.588 -2.288,4.035 -2.579,4.569 -2.87,5.102 -3.015,5.762 -3.015,6.547 c 0,0.864 0.185,1.614 0.554,2.249 0.369,0.636 0.851,1.166 1.448,1.59 0.597,0.424 1.272,0.738 2.026,0.942 0.753,0.204 1.507,0.306 2.261,0.306 0.879,0 1.723,-0.098 2.531,-0.294 C 6.614,11.144 7.332,10.825 7.96,10.386 8.588,9.946 9.087,9.385 9.456,8.702 9.825,8.019 10.01,7.191 10.01,6.218 H 6.43 C 6.398,6.72 6.292,7.136 6.112,7.466 5.931,7.796 5.691,8.055 5.393,8.243 5.095,8.431 4.749,8.564 4.357,8.643 3.965,8.722 3.548,8.761 3.109,8.761 2.81,8.761 2.512,8.73 2.214,8.667 1.915,8.604 1.644,8.494 1.401,8.337 1.158,8.18 0.958,7.98 0.801,7.736 0.644,7.493 0.565,7.199 0.565,6.854 0.565,6.524 0.628,6.257 0.754,6.053 0.879,5.849 1.126,5.664 1.496,5.499 1.864,5.334 2.375,5.161 3.026,4.981 3.678,4.801 4.53,4.577 5.582,4.31 5.786,4.263 6.053,4.196 6.382,4.11 6.712,4.023 7.061,3.905 7.43,3.756 7.799,3.607 8.168,3.415 8.538,3.179 8.906,2.944 9.244,2.653 9.55,2.308 9.856,1.962 10.103,1.55 10.292,1.071 c 0.188,-0.478 0.283,-1.032 0.283,-1.66 0,-0.769 -0.15,-1.484 -0.448,-2.143 C 9.829,-3.391 9.385,-3.961 8.797,-4.44 8.208,-4.919 7.478,-5.295 6.606,-5.57 5.735,-5.844 4.726,-5.982 3.58,-5.982 c -0.927,0 -1.825,0.118 -2.697,0.353 -0.871,0.236 -1.637,0.597 -2.296,1.083 -0.66,0.487 -1.189,1.107 -1.59,1.861 -0.4,0.754 -0.593,1.649 -0.577,2.685 z"
|
||||
style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
transform="matrix(0.91824614,0,0,-0.91824614,306.52462,535.33231)"
|
||||
clip-path="url(#clipPath131)" /><path
|
||||
id="path132"
|
||||
d="M 0,0 H 4.357 L 2.237,6.171 H 2.19 Z M 0.353,10.316 H 4.145 L 10.434,-6.5 H 6.594 L 5.323,-2.755 H -0.966 L -2.284,-6.5 h -3.745 z"
|
||||
style="fill:#ffffff;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
transform="matrix(0.91824614,0,0,-0.91824614,321.24944,534.489)"
|
||||
clip-path="url(#clipPath133)" /><path
|
||||
id="path134"
|
||||
d="m 0,0 c -0.063,0.424 -0.204,0.813 -0.424,1.166 -0.22,0.353 -0.495,0.663 -0.824,0.93 -0.33,0.267 -0.703,0.475 -1.119,0.624 -0.416,0.149 -0.852,0.224 -1.307,0.224 -0.833,0 -1.539,-0.161 -2.12,-0.483 C -6.375,2.139 -6.846,1.708 -7.207,1.166 -7.568,0.624 -7.831,0.008 -7.996,-0.683 c -0.165,-0.691 -0.247,-1.405 -0.247,-2.143 0,-0.707 0.082,-1.394 0.247,-2.061 0.165,-0.667 0.428,-1.268 0.789,-1.801 0.361,-0.535 0.832,-0.963 1.413,-1.284 0.581,-0.322 1.287,-0.483 2.12,-0.483 1.13,0 2.014,0.349 2.65,1.048 0.635,0.698 1.024,1.605 1.165,2.72 h 3.58 C 3.627,-5.739 3.383,-6.688 2.991,-7.537 2.598,-8.384 2.08,-9.107 1.437,-9.703 0.793,-10.3 0.039,-10.759 -0.824,-11.081 c -0.864,-0.322 -1.814,-0.483 -2.85,-0.483 -1.303,0 -2.465,0.228 -3.486,0.683 -1.02,0.455 -1.884,1.076 -2.591,1.861 -0.706,0.785 -1.248,1.711 -1.624,2.779 -0.377,1.067 -0.566,2.206 -0.566,3.415 0,1.24 0.189,2.402 0.566,3.486 0.376,1.083 0.918,2.025 1.624,2.826 0.707,0.801 1.571,1.428 2.591,1.884 1.021,0.455 2.183,0.683 3.486,0.683 0.926,0 1.801,-0.134 2.626,-0.401 C -0.224,5.385 0.514,4.997 1.166,4.487 1.817,3.976 2.355,3.345 2.779,2.591 3.203,1.837 3.47,0.973 3.58,0 Z"
|
||||
style="fill:#ed6c21;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
transform="matrix(0.91824614,0,0,-0.91824614,345.6488,530.20702)"
|
||||
clip-path="url(#clipPath135)" /><path
|
||||
id="path136"
|
||||
d="m 0,0 c 0,-0.707 0.082,-1.394 0.247,-2.061 0.165,-0.667 0.428,-1.268 0.789,-1.801 0.361,-0.534 0.832,-0.962 1.413,-1.284 0.581,-0.322 1.287,-0.483 2.12,-0.483 0.832,0 1.539,0.161 2.12,0.483 0.58,0.322 1.051,0.75 1.413,1.284 0.361,0.533 0.624,1.134 0.789,1.801 C 9.055,-1.394 9.138,-0.707 9.138,0 9.138,0.738 9.055,1.452 8.891,2.143 8.726,2.834 8.463,3.45 8.102,3.992 7.74,4.534 7.269,4.965 6.689,5.287 6.108,5.609 5.401,5.77 4.569,5.77 3.736,5.77 3.03,5.609 2.449,5.287 1.868,4.965 1.397,4.534 1.036,3.992 0.675,3.45 0.412,2.834 0.247,2.143 0.082,1.452 0,0.738 0,0 m -3.697,0 c 0,1.24 0.188,2.402 0.565,3.486 0.377,1.083 0.918,2.025 1.625,2.826 0.706,0.801 1.57,1.428 2.59,1.884 1.021,0.455 2.183,0.683 3.486,0.683 1.303,0 2.465,-0.228 3.486,-0.683 C 9.075,7.74 9.939,7.113 10.645,6.312 11.352,5.511 11.894,4.569 12.27,3.486 12.647,2.402 12.836,1.24 12.836,0 12.836,-1.209 12.647,-2.348 12.27,-3.415 11.894,-4.483 11.352,-5.409 10.645,-6.194 9.939,-6.979 9.075,-7.599 8.055,-8.055 7.034,-8.51 5.872,-8.738 4.569,-8.738 c -1.303,0 -2.465,0.228 -3.486,0.683 -1.02,0.456 -1.884,1.076 -2.59,1.861 -0.707,0.785 -1.248,1.711 -1.625,2.779 -0.377,1.067 -0.565,2.206 -0.565,3.415"
|
||||
style="fill:#ed6c21;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
transform="matrix(0.91824614,0,0,-0.91824614,353.13122,532.80209)"
|
||||
clip-path="url(#clipPath137)" /><path
|
||||
id="path138"
|
||||
d="M 0,0 H 4.051 C 4.883,0 5.514,0.188 5.947,0.565 6.378,0.942 6.594,1.554 6.594,2.402 6.594,3.218 6.378,3.811 5.947,4.18 5.514,4.549 4.883,4.734 4.051,4.734 H 0 Z M -3.698,7.607 H 5.37 C 6.123,7.607 6.802,7.485 7.407,7.242 8.011,6.999 8.529,6.665 8.961,6.241 9.393,5.817 9.723,5.322 9.951,4.757 10.178,4.192 10.292,3.595 10.292,2.968 10.292,1.978 10.084,1.122 9.668,0.4 9.252,-0.322 8.573,-0.871 7.63,-1.248 v -0.047 c 0.456,-0.126 0.833,-0.318 1.131,-0.577 0.298,-0.259 0.542,-0.57 0.73,-0.931 0.189,-0.361 0.326,-0.75 0.412,-1.165 0.086,-0.417 0.145,-0.837 0.177,-1.261 0.015,-0.267 0.031,-0.581 0.047,-0.942 0.015,-0.361 0.043,-0.726 0.083,-1.095 0.039,-0.369 0.101,-0.726 0.188,-1.071 0.086,-0.346 0.216,-0.636 0.388,-0.872 H 7.089 C 6.979,-8.942 6.896,-8.648 6.842,-8.326 6.786,-8.004 6.739,-7.666 6.7,-7.313 6.661,-6.96 6.63,-6.599 6.606,-6.229 6.583,-5.861 6.547,-5.511 6.5,-5.181 6.374,-4.302 6.107,-3.659 5.699,-3.25 5.291,-2.842 4.624,-2.638 3.698,-2.638 H 0 v -6.571 h -3.698 z"
|
||||
style="fill:#ed6c21;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
transform="matrix(0.91824614,0,0,-0.91824614,369.77058,532.00192)"
|
||||
clip-path="url(#clipPath139)" /><path
|
||||
id="path140"
|
||||
d="M 0,0 H 12.577 V -3.109 H 3.698 v -3.603 h 8.148 V -9.585 H 3.698 v -4.122 h 9.067 v -3.109 H 0 Z"
|
||||
style="fill:#ed6c21;fill-opacity:1;fill-rule:nonzero;stroke:none"
|
||||
transform="matrix(0.91824614,0,0,-0.91824614,381.13241,525.01674)"
|
||||
clip-path="url(#clipPath141)" /><g
|
||||
transform="matrix(1.9175717,0,0,1.9175717,389.21896,579.63082)"
|
||||
id="g2"
|
||||
style="clip-rule:evenodd;fill-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2"> <path
|
||||
d="m 0,-16.736 -16.012,16.012 c -0.322,0.322 -0.094,0.874 0.362,0.874 h 2.927 c 0.281,0 0.521,-0.139 0.617,-0.235 L 4.719,-16.012 c 0.323,-0.322 0.094,-0.874 -0.362,-0.874 H 0.362 c -0.136,0 -0.266,0.054 -0.362,0.15"
|
||||
style="fill:#cb1a23;fill-opacity:1;fill-rule:nonzero"
|
||||
id="path1" /> </g><g
|
||||
transform="matrix(1.9175717,0,0,1.9175717,385.91882,573.08615)"
|
||||
id="g3"
|
||||
style="clip-rule:evenodd;fill-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2"> <path
|
||||
d="M 0,-2.597 -2.743,0 h 1.245 c 0.236,0 0.464,-0.091 0.636,-0.254 l 1.675,-1.585 z"
|
||||
style="fill:#3d7a3d;fill-opacity:1;fill-rule:nonzero"
|
||||
id="path2-4" /> </g><g
|
||||
transform="matrix(1.9175717,0,0,1.9175717,408.63207,565.2126)"
|
||||
id="g4"
|
||||
style="clip-rule:evenodd;fill-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2"> <path
|
||||
d="m 0,-9.367 h -1.648 c 0.258,0.539 0.097,1.11 -0.309,1.517 L -9.421,-0.785 -8.636,0 0.362,-8.518 C 0.685,-8.841 0.456,-9.367 0,-9.367"
|
||||
style="fill:#3d7a3d;fill-opacity:1;fill-rule:nonzero"
|
||||
id="path3" /> </g><g
|
||||
transform="matrix(1.9175717,0,0,1.9175717,403.11157,576.486)"
|
||||
id="g5"
|
||||
style="clip-rule:evenodd;fill-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2"> <path
|
||||
d="m 0,-15.246 h -1.572 c 0.227,0.525 0.092,1.112 -0.312,1.517 L -16.388,0 h 1.181 c 0.236,0 0.464,-0.091 0.636,-0.254 l 4.972,-4.706 -0.78,-0.728 2.473,-2.34 0.753,0.753 7.515,-7.114 C 0.685,-14.712 0.456,-15.246 0,-15.246"
|
||||
style="fill:#f19e0e;fill-opacity:1;fill-rule:nonzero"
|
||||
id="path4-4" /> </g><g
|
||||
transform="matrix(1.9175717,0,0,1.9175717,308.28477,572.42881)"
|
||||
id="g6"
|
||||
style="clip-rule:evenodd;fill-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2"> <path
|
||||
d="m 0,-10.766 v 10.597 c 0,0.282 -0.229,0.512 -0.512,0.512 h -2.825 c -0.283,0 -0.512,-0.23 -0.512,-0.512 v -7.159 c 0,-0.136 0.054,-0.267 0.15,-0.363 l 3.261,-3.257 C -0.276,-11.109 0,-10.995 0,-10.766"
|
||||
style="fill:#fffffc;fill-rule:nonzero"
|
||||
id="path5" /> </g><g
|
||||
transform="matrix(1.9175717,0,0,1.9175717,308.09302,553.90219)"
|
||||
id="g7"
|
||||
style="clip-rule:evenodd;fill-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2"> <path
|
||||
d="M 0,-2.898 -3.312,0.41 C -3.474,0.571 -3.749,0.457 -3.749,0.229 v -3.438 c 0,-0.143 0.116,-0.26 0.26,-0.26 h 3.253 c 0.298,0 0.447,0.361 0.236,0.571"
|
||||
style="fill:#fffffc;fill-rule:nonzero"
|
||||
id="path6-9" /> </g><g
|
||||
transform="matrix(1.9175717,0,0,1.9175717,337.81039,560.16843)"
|
||||
id="g8"
|
||||
style="clip-rule:evenodd;fill-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2"> <path
|
||||
d="m 0,0 v 6.224 c 0,0.283 -0.229,0.513 -0.512,0.513 h -2.825 c -0.283,0 -0.512,-0.23 -0.512,-0.513 V 0 c 0,-0.337 -0.058,-0.661 -0.165,-0.962 -0.29,-0.821 -0.94,-1.471 -1.76,-1.76 -0.301,-0.107 -0.625,-0.165 -0.962,-0.165 -0.337,0 -0.661,0.058 -0.962,0.165 -0.821,0.289 -1.471,0.939 -1.761,1.76 -0.106,0.301 -0.164,0.625 -0.164,0.962 v 6.224 c 0,0.283 -0.23,0.513 -0.512,0.513 h -2.825 c -0.283,0 -0.513,-0.23 -0.513,-0.513 V 0 c 0,-0.327 0.024,-0.648 0.069,-0.962 0.097,-0.68 0.296,-1.327 0.58,-1.925 0.322,-0.679 0.756,-1.296 1.276,-1.827 0.032,-0.033 0.065,-0.066 0.097,-0.098 0.531,-0.52 1.148,-0.953 1.828,-1.276 0.598,-0.284 1.245,-0.483 1.925,-0.58 0.314,-0.045 0.635,-0.069 0.962,-0.069 0.326,0 0.648,0.024 0.962,0.069 0.68,0.097 1.327,0.296 1.925,0.58 0.679,0.323 1.296,0.756 1.827,1.276 0.033,0.032 0.066,0.065 0.098,0.098 0.52,0.531 0.953,1.148 1.276,1.827 0.284,0.598 0.483,1.245 0.58,1.925 C -0.023,-0.648 0,-0.327 0,0"
|
||||
style="fill:#fffffc;fill-rule:nonzero"
|
||||
id="path7" /> </g><g
|
||||
transform="matrix(1.9175717,0,0,1.9175717,353.8459,547.25032)"
|
||||
id="g9"
|
||||
style="clip-rule:evenodd;fill-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2"> <path
|
||||
d="m 0,13.473 h -6.224 c -0.283,0 -0.513,-0.229 -0.513,-0.512 v -2.825 c 0,-0.283 0.23,-0.512 0.513,-0.512 H 0 c 0.337,0 0.661,-0.058 0.962,-0.165 0.821,-0.29 1.471,-0.94 1.76,-1.76 C 2.829,7.398 2.887,7.074 2.887,6.737 2.887,6.4 2.829,6.076 2.722,5.775 2.433,4.954 1.783,4.304 0.962,4.014 0.661,3.908 0.337,3.85 0,3.85 h -6.224 c -0.283,0 -0.513,-0.23 -0.513,-0.513 V 0.513 C -6.737,0.23 -6.507,0 -6.224,0 H 0 C 0.327,0 0.648,0.024 0.962,0.069 1.642,0.166 2.289,0.365 2.887,0.649 3.566,0.971 4.183,1.405 4.714,1.925 4.747,1.957 4.78,1.99 4.812,2.022 5.332,2.553 5.765,3.17 6.088,3.85 6.372,4.448 6.571,5.095 6.668,5.775 6.713,6.089 6.737,6.41 6.737,6.737 6.737,7.063 6.713,7.385 6.668,7.699 6.571,8.379 6.372,9.026 6.088,9.624 5.765,10.303 5.332,10.92 4.812,11.451 4.78,11.484 4.747,11.517 4.714,11.549 4.183,12.069 3.566,12.502 2.887,12.825 2.289,13.109 1.642,13.308 0.962,13.405 0.648,13.45 0.327,13.473 0,13.473"
|
||||
style="fill:#fffffc;fill-rule:nonzero"
|
||||
id="path8" /> </g><g
|
||||
transform="matrix(1.9175717,0,0,1.9175717,387.95048,573.08577)"
|
||||
id="g10"
|
||||
style="clip-rule:evenodd;fill-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2"> <path
|
||||
d="m 0,-6.255 -2.473,2.341 4.038,3.764 C 1.661,-0.054 1.791,0 1.927,0 h 3.092 c 0.456,0 0.684,-0.552 0.362,-0.874 z"
|
||||
style="fill:#fffffc;fill-rule:nonzero"
|
||||
id="path9" /> </g><g
|
||||
transform="matrix(1.9175717,0,0,1.9175717,380.58221,552.11616)"
|
||||
id="g11"
|
||||
style="clip-rule:evenodd;fill-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2"> <path
|
||||
d="m 0,0.838 -3.225,-3.225 c -0.096,-0.096 -0.227,-0.15 -0.362,-0.15 h -3.995 c -0.457,0 -0.685,0.551 -0.362,0.874 l 5.404,5.038 z"
|
||||
style="fill:#fffffc;fill-rule:nonzero"
|
||||
id="path10" /> </g></svg>
|
||||
|
After Width: | Height: | Size: 31 KiB |
@@ -1,13 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ABS @Prusa CORE One 0.6",
|
||||
"renamed_from": "Prusa Generic ABS @CORE One 0.6;Prusa Generic ABS CORE One 0.6",
|
||||
"inherits": "Generic ABS @Prusa CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "PYQhstNvKFJ7qsxe",
|
||||
"filament_id": "OFY9muEs",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,73 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ABS @Prusa CORE One INDX",
|
||||
"inherits": "Generic ABS @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "JEatvybG9xIkrPk3",
|
||||
"instantiation": "true",
|
||||
"filament_cost": [
|
||||
"34.65"
|
||||
],
|
||||
"filament_notes": [
|
||||
"\nPrusa INDX 2.5.10 tuning."
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
"#FFF2EC"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"55"
|
||||
],
|
||||
"chamber_minimal_temperature": [
|
||||
"40"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"0.22%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One INDX 4T HF 0.4 nozzle",
|
||||
"Prusa CORE One INDX 8T HF 0.4 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"1"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"99.78%"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive High Flow"
|
||||
]
|
||||
}
|
||||
@@ -1,53 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ABS @Prusa CORE One MMU3",
|
||||
"inherits": "Generic ABS @Prusa CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "TM5fcvhbo1lgzsU6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"3"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"26.5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
]
|
||||
}
|
||||
@@ -1,11 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ABS @Prusa CORE One",
|
||||
"renamed_from": "Prusa Generic ABS @CORE One;Prusa Generic ABS CORE One",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"renamed_from": "Prusa Generic ABS @CORE One;Prusa Generic ABS CORE One;Generic ABS @Prusa CORE One MMU3;Generic ABS @MMU3;Generic ABS @Prusa CORE One 0.6;Prusa Generic ABS @CORE One 0.6;Prusa Generic ABS CORE One 0.6",
|
||||
"inherits": "Generic ABS @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "0k31oXq1pLQsHvrj",
|
||||
"filament_id": "OFY9muEs",
|
||||
"instantiation": "true",
|
||||
"chamber_temperature": [
|
||||
"40"
|
||||
@@ -17,10 +16,12 @@
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle",
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
@@ -31,39 +32,18 @@
|
||||
"filament_cost": [
|
||||
"27.82"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
@@ -73,12 +53,6 @@
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
|
||||
@@ -1,13 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ABS @Prusa MK4S 0.6",
|
||||
"renamed_from": "Prusa Generic ABS @MK4S 0.6;Prusa Generic ABS MK4S 0.6",
|
||||
"inherits": "Generic ABS @Prusa MK4S",
|
||||
"from": "system",
|
||||
"setting_id": "aNRfxkoYTEG3NPV1",
|
||||
"filament_id": "OFY9muEs",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,13 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ABS @Prusa MK4S 0.8",
|
||||
"renamed_from": "Prusa Generic ABS @MK4S 0.8;Prusa Generic ABS MK4S 0.8",
|
||||
"inherits": "Generic ABS @Prusa MK4S",
|
||||
"from": "system",
|
||||
"setting_id": "sL7NL7GOf52fzxnj",
|
||||
"filament_id": "OFY9muEs",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,7 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ABS @Prusa MK4S",
|
||||
"renamed_from": "Prusa Generic ABS @MK4S;Prusa Generic ABS MK4S",
|
||||
"renamed_from": "Prusa Generic ABS @MK4S;Prusa Generic ABS MK4S;Generic ABS @Prusa MK4S 0.6;Prusa Generic ABS @MK4S 0.6;Prusa Generic ABS MK4S 0.6;Generic ABS @Prusa MK4S 0.8;Prusa Generic ABS @MK4S 0.8;Prusa Generic ABS MK4S 0.8",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "6xkFvOyWtTQNXYAm",
|
||||
@@ -12,7 +12,9 @@
|
||||
"Prusa MK4S 0.25 nozzle",
|
||||
"Prusa MK4S 0.3 nozzle",
|
||||
"Prusa MK4S 0.4 nozzle",
|
||||
"Prusa MK4S 0.5 nozzle"
|
||||
"Prusa MK4S 0.5 nozzle",
|
||||
"Prusa MK4S 0.6 nozzle",
|
||||
"Prusa MK4S 0.8 nozzle"
|
||||
],
|
||||
"default_filament_colour": "#FFF2EC",
|
||||
"fan_max_speed": "10",
|
||||
|
||||
@@ -1,69 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ABS @Prusa XL 5T",
|
||||
"renamed_from": "Prusa Generic ABS @XL 5T;Prusa Generic ABS XL 5T",
|
||||
"inherits": "Generic ABS @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "XfavDzEzzrXDQVUC",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_intial_layer": "255",
|
||||
"nozzle_temperature": "255",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"hot_plate_temp": "105",
|
||||
"slow_down_min_speed": "15",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed_start": "19",
|
||||
"filament_loading_speed": "14",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "20",
|
||||
"filament_cooling_moves": "5",
|
||||
"filament_cooling_initial_speed": "10",
|
||||
"filament_cooling_final_speed": "50",
|
||||
"filament_retract_lift_below": "1.5",
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,12 +1,11 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ABS @Prusa XL",
|
||||
"renamed_from": "Prusa Generic ABS @XL;Prusa Generic ABS XL",
|
||||
"renamed_from": "Prusa Generic ABS @XL;Prusa Generic ABS XL;Generic ABS @Prusa XL 5T;Prusa Generic ABS @XL 5T;Prusa Generic ABS XL 5T",
|
||||
"inherits": "Generic ABS @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "HYHkGEjr6Kid2Xg2",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_intial_layer": "255",
|
||||
"nozzle_temperature": "255",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"hot_plate_temp": "105",
|
||||
@@ -49,6 +48,30 @@
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle"
|
||||
"Prusa XL 0.8 nozzle",
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -2,9 +2,10 @@
|
||||
"type": "filament",
|
||||
"name": "Generic ABS HF @Prusa MINIIS 0.6",
|
||||
"renamed_from": "Prusa Generic ABS HF @MINIIS 0.6;Prusa Generic ABS HF MINIIS 0.6",
|
||||
"inherits": "Generic ABS HF @Prusa base",
|
||||
"inherits": "Generic ABS @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "L6copDR26trR0D8B",
|
||||
"filament_id": "OF55jHAJ",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
|
||||
@@ -2,9 +2,10 @@
|
||||
"type": "filament",
|
||||
"name": "Generic ABS HF @Prusa MINIIS 0.8",
|
||||
"renamed_from": "Prusa Generic ABS HF @MINIIS 0.8;Prusa Generic ABS HF MINIIS 0.8",
|
||||
"inherits": "Generic ABS HF @Prusa base",
|
||||
"inherits": "Generic ABS @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "oxiwspATW960u3eZ",
|
||||
"filament_id": "OF55jHAJ",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
|
||||
@@ -2,9 +2,10 @@
|
||||
"type": "filament",
|
||||
"name": "Generic ABS HF @Prusa MINIIS",
|
||||
"renamed_from": "Prusa Generic ABS HF @MINIIS;Prusa Generic ABS HF MINIIS",
|
||||
"inherits": "Generic ABS HF @Prusa base",
|
||||
"inherits": "Generic ABS @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "KcRRWqB7hrovzBng",
|
||||
"filament_id": "OF55jHAJ",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
|
||||
@@ -1,8 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ABS HF @Prusa base",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"filament_id": "OF55jHAJ",
|
||||
"instantiation": "false"
|
||||
}
|
||||
@@ -11,6 +11,11 @@
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255",
|
||||
"255",
|
||||
"255",
|
||||
"255",
|
||||
"255",
|
||||
"255"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
|
||||
@@ -11,6 +11,11 @@
|
||||
"Prusa CORE One 0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
|
||||
@@ -11,15 +11,30 @@
|
||||
"Prusa CORE One HF 0.4 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"26",
|
||||
"26",
|
||||
"26",
|
||||
"26",
|
||||
"26",
|
||||
"26"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -11,15 +11,30 @@
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"27",
|
||||
"27",
|
||||
"27",
|
||||
"27",
|
||||
"27",
|
||||
"27"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -11,15 +11,30 @@
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"34",
|
||||
"34",
|
||||
"34",
|
||||
"34",
|
||||
"34",
|
||||
"34"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265",
|
||||
"265"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
|
||||
@@ -11,18 +11,38 @@
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36",
|
||||
"36",
|
||||
"36",
|
||||
"36",
|
||||
"36",
|
||||
"36"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270",
|
||||
"270",
|
||||
"270",
|
||||
"270",
|
||||
"270",
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270",
|
||||
"270",
|
||||
"270",
|
||||
"270",
|
||||
"270",
|
||||
"270"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
|
||||
@@ -1,53 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ASA @Prusa CORE One MMU3",
|
||||
"inherits": "Generic ASA @Prusa CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "0uAHoCupgHmVYVEx",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"3"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"26.5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
]
|
||||
}
|
||||
@@ -1,11 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ASA @Prusa CORE One",
|
||||
"renamed_from": "Prusa Generic ASA @CORE One;Prusa Generic ASA CORE One",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"renamed_from": "Prusa Generic ASA @CORE One;Prusa Generic ASA CORE One;Generic ASA @Prusa CORE One MMU3;Generic ASA @MMU3",
|
||||
"inherits": "Generic ASA @System",
|
||||
"from": "system",
|
||||
"setting_id": "Q7fgojkHRZI0floy",
|
||||
"filament_id": "OFLPAxz3",
|
||||
"instantiation": "true",
|
||||
"chamber_temperature": [
|
||||
"40"
|
||||
@@ -17,15 +16,29 @@
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"25",
|
||||
"25",
|
||||
"25",
|
||||
"25",
|
||||
"25",
|
||||
"25"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20",
|
||||
"20",
|
||||
"20",
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
@@ -34,36 +47,36 @@
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15",
|
||||
"15",
|
||||
"15",
|
||||
"15",
|
||||
"15",
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35",
|
||||
"35",
|
||||
"35",
|
||||
"35",
|
||||
"35",
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
@@ -73,22 +86,101 @@
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270",
|
||||
"270",
|
||||
"270",
|
||||
"270",
|
||||
"270",
|
||||
"270"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil",
|
||||
"nil",
|
||||
"nil",
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80",
|
||||
"80",
|
||||
"80",
|
||||
"80",
|
||||
"80",
|
||||
"80"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic FLEX @Prusa XL 5T",
|
||||
"renamed_from": "Prusa Generic FLEX @XL 5T;Prusa Generic FLEX XL 5T",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "ef8fSryRYselyr4G",
|
||||
"filament_id": "OFbPuPKY",
|
||||
"instantiation": "true",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_retract_lift_below": "0.6",
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"2.5"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,7 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic FLEX @Prusa XL",
|
||||
"renamed_from": "Prusa Generic FLEX @XL;Prusa Generic FLEX XL",
|
||||
"renamed_from": "Prusa Generic FLEX @XL;Prusa Generic FLEX XL;Generic FLEX @Prusa XL 5T;Prusa Generic FLEX @XL 5T;Prusa Generic FLEX XL 5T",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "qrFWrwgQSXgU7oCb",
|
||||
@@ -30,6 +30,12 @@
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle"
|
||||
"Prusa XL 0.8 nozzle",
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PA @Prusa",
|
||||
"renamed_from": "Prusa Generic PA",
|
||||
"renamed_from": "Prusa Generic PA;Generic PA @Prusa CORE One MMU3;Generic PA @MMU3",
|
||||
"inherits": "Generic PA @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "zTnz1NYXoXxIHhRv",
|
||||
@@ -27,6 +27,10 @@
|
||||
"Prusa MK4 0.25 nozzle",
|
||||
"Prusa MK4 0.4 nozzle",
|
||||
"Prusa MK4 0.6 nozzle",
|
||||
"Prusa MK4 0.8 nozzle"
|
||||
"Prusa MK4 0.8 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,17 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PC @Prusa",
|
||||
"renamed_from": "Prusa Generic PC",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"renamed_from": "Prusa Generic PC;Generic PC @Prusa CORE One MMU3;Generic PC @MMU3",
|
||||
"inherits": "Generic PC @System",
|
||||
"from": "system",
|
||||
"setting_id": "UJ5KpqIb5mpcNXzl",
|
||||
"filament_id": "OFLakOUI",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
@@ -40,6 +30,106 @@
|
||||
"Prusa MINI 0.25 nozzle",
|
||||
"Prusa MINI 0.4 nozzle",
|
||||
"Prusa MINI 0.6 nozzle",
|
||||
"Prusa MINI 0.8 nozzle"
|
||||
"Prusa MINI 0.8 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280",
|
||||
"280",
|
||||
"280",
|
||||
"280",
|
||||
"280",
|
||||
"280"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil",
|
||||
"nil",
|
||||
"nil",
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80",
|
||||
"80",
|
||||
"80",
|
||||
"80",
|
||||
"80",
|
||||
"80"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -0,0 +1,91 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PETG @Prusa CORE One INDX",
|
||||
"inherits": "Generic PETG @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "HbevqxqvYHuvRc3v",
|
||||
"instantiation": "true",
|
||||
"filament_cost": [
|
||||
"27.82"
|
||||
],
|
||||
"filament_notes": [
|
||||
"\nPrusa INDX 2.5.10 tuning."
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"9"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"85"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"5"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"25"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
"#FF8000"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"17"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"85"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"65"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.6"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"20"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"1"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"35"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One INDX 4T HF 0.4 nozzle",
|
||||
"Prusa CORE One INDX 8T HF 0.4 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"textured_plate_temp": [
|
||||
"85"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"85"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.052"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive High Flow"
|
||||
]
|
||||
}
|
||||
@@ -1,53 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PETG @Prusa CORE One MMU3",
|
||||
"inherits": "Generic PETG @Prusa CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "JutuB6ct5A1l2Biz",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"3"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"26.5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.053{elsif nozzle_diameter[filament_extruder_id]==0.5}0.042{elsif nozzle_diameter[filament_extruder_id]==0.6}0.032{elsif nozzle_diameter[filament_extruder_id]==0.8}0.018{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
]
|
||||
}
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PETG @Prusa CORE One",
|
||||
"renamed_from": "Prusa Generic PETG @CORE One;Prusa Generic PETG CORE One",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"renamed_from": "Prusa Generic PETG @CORE One;Prusa Generic PETG CORE One;Generic PETG @Prusa CORE One MMU3;Generic PETG @MMU3",
|
||||
"inherits": "Generic PETG @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "W71PW5bpf7CV16D4",
|
||||
"filament_id": "OFYPdQJh",
|
||||
"instantiation": "true",
|
||||
"chamber_temperature": [
|
||||
"35"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"25"
|
||||
@@ -31,45 +31,24 @@
|
||||
"filament_cost": [
|
||||
"27.82"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"20"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.07{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{elsif nozzle_diameter[filament_extruder_id]==0.35}0.08{elsif nozzle_diameter[filament_extruder_id]==0.6}0.04{elsif nozzle_diameter[filament_extruder_id]==0.5}0.05{elsif nozzle_diameter[filament_extruder_id]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.053{elsif nozzle_diameter[filament_extruder_id]==0.5}0.042{elsif nozzle_diameter[filament_extruder_id]==0.6}0.032{elsif nozzle_diameter[filament_extruder_id]==0.8}0.018{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
@@ -100,9 +79,6 @@
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"9"
|
||||
],
|
||||
|
||||
@@ -1,72 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PETG @Prusa XL 5T",
|
||||
"renamed_from": "Prusa Generic PETG @XL 5T;Prusa Generic PETG XL 5T",
|
||||
"inherits": "Generic PETG @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "DNJECSjW6zKYALxE",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_intial_layer": "230",
|
||||
"nozzle_temperature": "240",
|
||||
"hot_plate_temp_initial_layer": "80",
|
||||
"hot_plate_temp": "80",
|
||||
"full_fan_speed_layer": "5",
|
||||
"slow_down_min_speed": "15",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"9"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"50"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_loading_speed_start": "50",
|
||||
"filament_loading_speed": "10",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "100",
|
||||
"filament_cooling_moves": "3",
|
||||
"filament_cooling_initial_speed": "5",
|
||||
"filament_cooling_final_speed": "2.5",
|
||||
"filament_retract_lift_below": "1.5",
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_wipe": "1",
|
||||
"filament_retract_before_wipe": "20%",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,12 +1,11 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PETG @Prusa XL",
|
||||
"renamed_from": "Prusa Generic PETG @XL;Prusa Generic PETG XL",
|
||||
"renamed_from": "Prusa Generic PETG @XL;Prusa Generic PETG XL;Generic PETG @Prusa XL 5T;Prusa Generic PETG @XL 5T;Prusa Generic PETG XL 5T",
|
||||
"inherits": "Generic PETG @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "8vcNv4b4H7aYA01G",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_intial_layer": "230",
|
||||
"nozzle_temperature": "240",
|
||||
"hot_plate_temp_initial_layer": "80",
|
||||
"hot_plate_temp": "80",
|
||||
@@ -52,6 +51,30 @@
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle"
|
||||
"Prusa XL 0.8 nozzle",
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -2,9 +2,10 @@
|
||||
"type": "filament",
|
||||
"name": "Generic PETG HF @Prusa MINIIS 0.6",
|
||||
"renamed_from": "Prusa Generic PETG HF @MINIIS 0.6;Prusa Generic PETG HF MINIIS 0.6",
|
||||
"inherits": "Generic PETG HF @Prusa base",
|
||||
"inherits": "Generic PETG @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "nF8YzRMvaT4D8LBD",
|
||||
"filament_id": "OF7lOgYF",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
|
||||
@@ -2,9 +2,10 @@
|
||||
"type": "filament",
|
||||
"name": "Generic PETG HF @Prusa MINIIS 0.8",
|
||||
"renamed_from": "Prusa Generic PETG HF @MINIIS 0.8;Prusa Generic PETG HF MINIIS 0.8",
|
||||
"inherits": "Generic PETG HF @Prusa base",
|
||||
"inherits": "Generic PETG @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "7itUjrAu9Oj9hxiU",
|
||||
"filament_id": "OF7lOgYF",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
|
||||
@@ -2,9 +2,10 @@
|
||||
"type": "filament",
|
||||
"name": "Generic PETG HF @Prusa MINIIS",
|
||||
"renamed_from": "Prusa Generic PETG HF @MINIIS;Prusa Generic PETG HF MINIIS",
|
||||
"inherits": "Generic PETG HF @Prusa base",
|
||||
"inherits": "Generic PETG @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "dPNOryBcrviemefo",
|
||||
"filament_id": "OF7lOgYF",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
|
||||
@@ -1,8 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PETG HF @Prusa base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "OF7lOgYF",
|
||||
"instantiation": "false"
|
||||
}
|
||||
@@ -0,0 +1,70 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA @Prusa CORE One INDX",
|
||||
"inherits": "Generic PLA @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "4qjcaIf1vk3K1x4Z",
|
||||
"instantiation": "true",
|
||||
"filament_cost": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_notes": [
|
||||
"\nPrusa INDX 2.5.10 tuning."
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"9"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
"#FF8000"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"28"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.8"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"20"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One INDX 4T HF 0.4 nozzle",
|
||||
"Prusa CORE One INDX 8T HF 0.4 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.027"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive High Flow"
|
||||
]
|
||||
}
|
||||
@@ -1,53 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA @Prusa CORE One MMU3",
|
||||
"inherits": "Generic PLA @Prusa CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "haNaA1KFlYeqtfIg",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.022{elsif nozzle_diameter[filament_extruder_id]==0.6}0.019{elsif nozzle_diameter[filament_extruder_id]==0.8}0.013{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"30"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"170"
|
||||
]
|
||||
}
|
||||
@@ -1,70 +1,43 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA @Prusa CORE One",
|
||||
"renamed_from": "Prusa Generic PLA @CORE One;Prusa Generic PLA CORE One",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"renamed_from": "Prusa Generic PLA @CORE One;Prusa Generic PLA CORE One;Generic PLA @Prusa CORE One MMU3;Generic PLA @MMU3",
|
||||
"inherits": "Generic PLA @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "r2i4c7DsYXYIMVCX",
|
||||
"filament_id": "OFDSrzZ8",
|
||||
"instantiation": "true",
|
||||
"chamber_temperature": [
|
||||
"20"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One L 0.4 nozzle"
|
||||
"Prusa CORE One L 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"85"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One|CORE One L).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.6"
|
||||
],
|
||||
@@ -74,27 +47,12 @@
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"150"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
"170"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
|
||||
@@ -1,67 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA @Prusa XL 5T",
|
||||
"renamed_from": "Prusa Generic PLA @XL 5T;Prusa Generic PLA XL 5T",
|
||||
"inherits": "Generic PLA @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "wDxtZLt5J2JODMBq",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_intial_layer": "215",
|
||||
"nozzle_temperature": "210",
|
||||
"hot_plate_temp_initial_layer": "60",
|
||||
"hot_plate_temp": "60",
|
||||
"full_fan_speed_layer": "3",
|
||||
"slow_down_min_speed": "15",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_loading_speed_start": "50",
|
||||
"filament_loading_speed": "10",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "100",
|
||||
"filament_cooling_moves": "2",
|
||||
"filament_cooling_initial_speed": "10",
|
||||
"filament_cooling_final_speed": "3.5",
|
||||
"filament_retract_lift_below": "0.6",
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,12 +1,11 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA @Prusa XL",
|
||||
"renamed_from": "Prusa Generic PLA @XL;Prusa Generic PLA XL",
|
||||
"renamed_from": "Prusa Generic PLA @XL;Prusa Generic PLA XL;Generic PLA @Prusa XL 5T;Prusa Generic PLA @XL 5T;Prusa Generic PLA XL 5T",
|
||||
"inherits": "Generic PLA @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "27u5AiklUhmExsys",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_intial_layer": "215",
|
||||
"nozzle_temperature": "210",
|
||||
"hot_plate_temp_initial_layer": "60",
|
||||
"hot_plate_temp": "60",
|
||||
@@ -47,6 +46,30 @@
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle"
|
||||
"Prusa XL 0.8 nozzle",
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -2,9 +2,10 @@
|
||||
"type": "filament",
|
||||
"name": "Generic PLA HF @Prusa MINIIS 0.6",
|
||||
"renamed_from": "Prusa Generic PLA HF @MINIIS 0.6;Prusa Generic PLA HF MINIIS 0.6",
|
||||
"inherits": "Generic PLA HF @Prusa base",
|
||||
"inherits": "Generic PLA @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "eqBN6ykUB4csEMCR",
|
||||
"filament_id": "OFZr862X",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
|
||||
@@ -2,9 +2,10 @@
|
||||
"type": "filament",
|
||||
"name": "Generic PLA HF @Prusa MINIIS 0.8",
|
||||
"renamed_from": "Prusa Generic PLA HF @MINIIS 0.8;Prusa Generic PLA HF MINIIS 0.8",
|
||||
"inherits": "Generic PLA HF @Prusa base",
|
||||
"inherits": "Generic PLA @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "FuCHQFBuP9yLUzT0",
|
||||
"filament_id": "OFZr862X",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
|
||||
@@ -2,9 +2,10 @@
|
||||
"type": "filament",
|
||||
"name": "Generic PLA HF @Prusa MINIIS",
|
||||
"renamed_from": "Prusa Generic PLA HF @MINIIS;Prusa Generic PLA HF MINIIS",
|
||||
"inherits": "Generic PLA HF @Prusa base",
|
||||
"inherits": "Generic PLA @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "cQJUt7LR5hkKT0Za",
|
||||
"filament_id": "OFZr862X",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
|
||||
@@ -1,8 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA HF @Prusa base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OFZr862X",
|
||||
"instantiation": "false"
|
||||
}
|
||||
@@ -12,9 +12,19 @@
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9",
|
||||
"9",
|
||||
"9",
|
||||
"9",
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215",
|
||||
"215",
|
||||
"215",
|
||||
"215",
|
||||
"215",
|
||||
"215"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
|
||||
@@ -12,6 +12,11 @@
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
|
||||
@@ -0,0 +1,184 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA Silk @Prusa CORE One INDX",
|
||||
"inherits": "Generic PLA Silk @System",
|
||||
"from": "system",
|
||||
"setting_id": "eKla6su22rYaL9iz",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_notes": [
|
||||
"\nPrusa INDX 2.5.10 tuning."
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
"#FF8000"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12.5",
|
||||
"12.5",
|
||||
"12.5",
|
||||
"12.5",
|
||||
"12.5",
|
||||
"12.5"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215",
|
||||
"215",
|
||||
"215",
|
||||
"215",
|
||||
"215",
|
||||
"215"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"20"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"70%",
|
||||
"70%",
|
||||
"70%",
|
||||
"70%",
|
||||
"70%",
|
||||
"70%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One INDX 4T HF 0.4 nozzle",
|
||||
"Prusa CORE One INDX 8T HF 0.4 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.025",
|
||||
"0.025",
|
||||
"0.025",
|
||||
"0.025",
|
||||
"0.025",
|
||||
"0.025"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230",
|
||||
"230",
|
||||
"230",
|
||||
"230",
|
||||
"230",
|
||||
"230"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil",
|
||||
"nil",
|
||||
"nil",
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80",
|
||||
"80",
|
||||
"80",
|
||||
"80",
|
||||
"80",
|
||||
"80"
|
||||
]
|
||||
}
|
||||
@@ -1,53 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA Silk @Prusa CORE One MMU3",
|
||||
"inherits": "Generic PLA Silk @Prusa CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "MMarDGtK4f7u78gA",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.5}0.022{elsif nozzle_diameter[0]==0.6}0.018{elsif nozzle_diameter[0]==0.8}0.012{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.075{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"30"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"170"
|
||||
]
|
||||
}
|
||||
@@ -1,75 +1,76 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA Silk @Prusa CORE One",
|
||||
"renamed_from": "Prusa Generic PLA Silk @CORE One;Prusa Generic PLA Silk CORE One",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"renamed_from": "Prusa Generic PLA Silk @CORE One;Prusa Generic PLA Silk CORE One;Generic PLA Silk @Prusa CORE One MMU3;Generic PLA Silk @MMU3",
|
||||
"inherits": "Generic PLA Silk @System",
|
||||
"from": "system",
|
||||
"setting_id": "F9lNHyhZwZi7aD74",
|
||||
"filament_id": "OFesA6rF",
|
||||
"instantiation": "true",
|
||||
"chamber_temperature": [
|
||||
"20"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One HF 0.4 nozzle",
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
"Prusa CORE One HF 0.5 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"85",
|
||||
"85",
|
||||
"85",
|
||||
"85",
|
||||
"85",
|
||||
"85"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"7",
|
||||
"7",
|
||||
"7",
|
||||
"7",
|
||||
"7",
|
||||
"7"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.5}0.022{elsif nozzle_diameter[0]==0.6}0.018{elsif nozzle_diameter[0]==0.8}0.012{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.075{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift",
|
||||
"Slope Lift",
|
||||
"Slope Lift",
|
||||
"Slope Lift",
|
||||
"Slope Lift",
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
@@ -82,24 +83,107 @@
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"150"
|
||||
"170"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225",
|
||||
"225",
|
||||
"225",
|
||||
"225",
|
||||
"225",
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230",
|
||||
"230",
|
||||
"230",
|
||||
"230",
|
||||
"230",
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil",
|
||||
"nil",
|
||||
"nil",
|
||||
"nil",
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230",
|
||||
"230",
|
||||
"230",
|
||||
"230",
|
||||
"230",
|
||||
"230"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80",
|
||||
"80",
|
||||
"80",
|
||||
"80",
|
||||
"80",
|
||||
"80"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -2,9 +2,10 @@
|
||||
"type": "filament",
|
||||
"name": "Generic PVA HF @Prusa MINIIS 0.6",
|
||||
"renamed_from": "Prusa Generic PVA HF @MINIIS 0.6;Prusa Generic PVA HF MINIIS 0.6",
|
||||
"inherits": "Generic PVA HF @Prusa base",
|
||||
"inherits": "Generic PVA @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "qeWFOMhrKa1yezHw",
|
||||
"filament_id": "OFDwBwO5",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
|
||||
@@ -2,9 +2,10 @@
|
||||
"type": "filament",
|
||||
"name": "Generic PVA HF @Prusa MINIIS 0.8",
|
||||
"renamed_from": "Prusa Generic PVA HF @MINIIS 0.8;Prusa Generic PVA HF MINIIS 0.8",
|
||||
"inherits": "Generic PVA HF @Prusa base",
|
||||
"inherits": "Generic PVA @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "h0RQ3XME0UFEeZVA",
|
||||
"filament_id": "OFDwBwO5",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
|
||||
@@ -2,9 +2,10 @@
|
||||
"type": "filament",
|
||||
"name": "Generic PVA HF @Prusa MINIIS",
|
||||
"renamed_from": "Prusa Generic PVA HF @MINIIS;Prusa Generic PVA HF MINIIS",
|
||||
"inherits": "Generic PVA HF @Prusa base",
|
||||
"inherits": "Generic PVA @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "VZcvmjCAtivpMepD",
|
||||
"filament_id": "OFDwBwO5",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
|
||||
@@ -1,8 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PVA HF @Prusa base",
|
||||
"inherits": "fdm_filament_pva",
|
||||
"from": "system",
|
||||
"filament_id": "OFDwBwO5",
|
||||
"instantiation": "false"
|
||||
}
|
||||
@@ -1,53 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic TPU @Prusa CORE One MMU3",
|
||||
"inherits": "Generic TPU @Prusa CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "pYEUfg7uqu2LGw2n",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K0 ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"150"
|
||||
]
|
||||
}
|
||||
@@ -1,11 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic TPU @Prusa CORE One",
|
||||
"renamed_from": "Prusa Generic TPU @CORE One;Prusa Generic TPU CORE One",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"renamed_from": "Prusa Generic TPU @CORE One;Prusa Generic TPU CORE One;Generic TPU @Prusa CORE One MMU3;Generic TPU @MMU3",
|
||||
"inherits": "Generic TPU @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "jsXqf9CeaXCvsrWM",
|
||||
"filament_id": "OFgbpcy9",
|
||||
"instantiation": "true",
|
||||
"chamber_temperature": [
|
||||
"30"
|
||||
@@ -19,10 +18,11 @@
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One HF 0.4 nozzle",
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
"Prusa CORE One HF 0.5 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
@@ -39,9 +39,6 @@
|
||||
"filament_deretraction_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
@@ -51,12 +48,6 @@
|
||||
"filament_max_volumetric_speed": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
@@ -66,18 +57,9 @@
|
||||
"filament_retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K0 ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"0"
|
||||
],
|
||||
@@ -102,13 +84,31 @@
|
||||
"overhang_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -2,9 +2,10 @@
|
||||
"type": "filament",
|
||||
"name": "Generic TPU HF @Prusa MINIIS",
|
||||
"renamed_from": "Prusa Generic TPU HF @MINIIS;Prusa Generic TPU HF MINIIS",
|
||||
"inherits": "Generic TPU HF @Prusa base",
|
||||
"inherits": "Generic TPU @Prusa base",
|
||||
"from": "system",
|
||||
"setting_id": "Jw1UjgrXtYG5rMDt",
|
||||
"filament_id": "OFnT7Qpb",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
|
||||
@@ -1,8 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic TPU HF @Prusa base",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "OFnT7Qpb",
|
||||
"instantiation": "false"
|
||||
}
|
||||
@@ -1,54 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament ASA @CORE One MMU3",
|
||||
"inherits": "Prusament ASA @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "pESQ8XminojyIGyw",
|
||||
"filament_id": "OFmFwUWM",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"3"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"26.5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
]
|
||||
}
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament ASA @CORE One",
|
||||
"renamed_from": "Prusament ASA CORE One;Prusament ASA @CORE One MMU3;Prusament ASA CORE One MMU3",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "UUTjJ4Y8St3c87jD",
|
||||
@@ -16,7 +17,11 @@
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
|
||||
@@ -1,74 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament ASA @XL 5T",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "IQu91UAWOJOQcUq9",
|
||||
"filament_id": "OFmFwUWM",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"nozzle_temperature_intial_layer": "260",
|
||||
"nozzle_temperature": "260",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"hot_plate_temp": "105",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_loading_speed_start": "19",
|
||||
"filament_loading_speed": "14",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "20",
|
||||
"filament_cooling_moves": "5",
|
||||
"filament_cooling_initial_speed": "10",
|
||||
"filament_cooling_final_speed": "50",
|
||||
"filament_retract_lift_below": "1.5",
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament ASA @XL",
|
||||
"renamed_from": "Prusament ASA XL;Prusament ASA @XL 5T;Prusament ASA XL 5T",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "RaEoFoZdXkkOz9yh",
|
||||
@@ -9,7 +10,6 @@
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"nozzle_temperature_intial_layer": "260",
|
||||
"nozzle_temperature": "260",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"hot_plate_temp": "105",
|
||||
@@ -54,6 +54,30 @@
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle"
|
||||
"Prusa XL 0.8 nozzle",
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,54 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PA-CF @CORE One MMU3",
|
||||
"inherits": "Prusament PA-CF @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "DsvJLtFStnmOCm1m",
|
||||
"filament_id": "OF54SvEe",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"3"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"26.5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n\nM142 S45 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
]
|
||||
}
|
||||
@@ -1,59 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PA-CF @XL",
|
||||
"inherits": "fdm_filament_pa11cf",
|
||||
"from": "system",
|
||||
"setting_id": "IrL4iU2kkMBHIw3e",
|
||||
"filament_id": "OF54SvEe",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"nozzle_temperature_intial_layer": "275",
|
||||
"nozzle_temperature": "285",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"hot_plate_temp": "105",
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6.5"
|
||||
],
|
||||
"filament_loading_speed_start": "19",
|
||||
"filament_loading_speed": "14",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "20",
|
||||
"filament_cooling_moves": "5",
|
||||
"filament_cooling_initial_speed": "10",
|
||||
"filament_cooling_final_speed": "50",
|
||||
"filament_retract_lift_below": "1.5",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 0.25 nozzle",
|
||||
"Prusa XL 0.3 nozzle",
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
+4
-4
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PA-CF @CORE One 0.6",
|
||||
"inherits": "Prusament PA-CF @CORE One",
|
||||
"name": "Prusament PA11 Carbon Fiber @CORE One 0.6",
|
||||
"renamed_from": "Prusament PA-CF CORE One 0.6;Prusament PA-CF @CORE One 0.6",
|
||||
"inherits": "Prusament PA11 Carbon Fiber @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "sEDEmqR4k65IhJ4D",
|
||||
"filament_id": "OF54SvEe",
|
||||
"setting_id": "NnKKBWPNEdRvH949",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle",
|
||||
+4
-4
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PA-CF @CORE One 0.8",
|
||||
"inherits": "Prusament PA-CF @CORE One",
|
||||
"name": "Prusament PA11 Carbon Fiber @CORE One 0.8",
|
||||
"renamed_from": "Prusament PA-CF CORE One 0.8;Prusament PA-CF @CORE One 0.8",
|
||||
"inherits": "Prusament PA11 Carbon Fiber @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "gwFsNIMKGU1f2vPS",
|
||||
"filament_id": "OF54SvEe",
|
||||
"setting_id": "pf0wt2nXYdq9bDfT",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle",
|
||||
+9
-4
@@ -1,10 +1,11 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PA-CF @CORE One",
|
||||
"name": "Prusament PA11 Carbon Fiber @CORE One",
|
||||
"renamed_from": "Prusament PA-CF CORE One;Prusament PA-CF @CORE One MMU3;Prusament PA-CF CORE One MMU3;Prusament PA-CF @CORE One",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "08PdV2lMsSv1JeOt",
|
||||
"filament_id": "OF54SvEe",
|
||||
"setting_id": "sNGgucQjiFXwuFkq",
|
||||
"filament_id": "OF4MZtnE",
|
||||
"instantiation": "true",
|
||||
"chamber_temperature": [
|
||||
"40"
|
||||
@@ -18,7 +19,11 @@
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One HF 0.4 nozzle",
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
"Prusa CORE One HF 0.5 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"15"
|
||||
+57
-26
@@ -1,18 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PA-CF @XL 5T",
|
||||
"name": "Prusament PA11 Carbon Fiber @XL",
|
||||
"renamed_from": "Prusament PA-CF XL;Prusament PA-CF @XL 5T;Prusament PA-CF XL 5T;Prusament PA-CF @XL",
|
||||
"inherits": "fdm_filament_pa11cf",
|
||||
"from": "system",
|
||||
"setting_id": "FYerOcjToJ3ABpu1",
|
||||
"filament_id": "OF54SvEe",
|
||||
"setting_id": "exG5swknk2cWAbpY",
|
||||
"filament_id": "OF4MZtnE",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"nozzle_temperature_intial_layer": "275",
|
||||
"nozzle_temperature": "285",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"hot_plate_temp": "105",
|
||||
"nozzle_temperature": [
|
||||
"285"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
@@ -37,16 +43,46 @@
|
||||
"filament_max_volumetric_speed": [
|
||||
"6.5"
|
||||
],
|
||||
"filament_loading_speed_start": "19",
|
||||
"filament_loading_speed": "14",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "20",
|
||||
"filament_cooling_moves": "5",
|
||||
"filament_cooling_initial_speed": "10",
|
||||
"filament_cooling_final_speed": "50",
|
||||
"filament_retract_lift_below": "1.5",
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
"filament_loading_speed_start": [
|
||||
"19"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"14"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 0.25 nozzle",
|
||||
"Prusa XL 0.3 nozzle",
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle",
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
@@ -60,15 +96,10 @@
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
]
|
||||
}
|
||||
@@ -1,54 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PC Blend @CORE One MMU3",
|
||||
"inherits": "Prusament PC Blend @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "VjMN8MwtU3BG5cA9",
|
||||
"filament_id": "OFvDbkFq",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"3"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"26.5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n\nM142 S45 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"150"
|
||||
]
|
||||
}
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PC Blend @CORE One",
|
||||
"renamed_from": "Prusament PC Blend CORE One;Prusament PC Blend @CORE One MMU3;Prusament PC Blend CORE One MMU3",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "x1SkWhSSkVVIPwCF",
|
||||
@@ -16,7 +17,11 @@
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
@@ -73,7 +78,7 @@
|
||||
"110"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
"150"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
|
||||
@@ -1,74 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PC Blend @XL 5T",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "FOgpd4BtawBtmjPB",
|
||||
"filament_id": "OFvDbkFq",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"nozzle_temperature_intial_layer": "275",
|
||||
"nozzle_temperature": "275",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"hot_plate_temp": "105",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
"filament_loading_speed_start": "19",
|
||||
"filament_loading_speed": "14",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "20",
|
||||
"filament_cooling_moves": "5",
|
||||
"filament_cooling_initial_speed": "10",
|
||||
"filament_cooling_final_speed": "50",
|
||||
"filament_retract_lift_below": "1.5",
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PC Blend @XL",
|
||||
"renamed_from": "Prusament PC Blend XL;Prusament PC Blend @XL 5T;Prusament PC Blend XL 5T",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "DLTlxt04GREtOiec",
|
||||
@@ -9,7 +10,6 @@
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"nozzle_temperature_intial_layer": "275",
|
||||
"nozzle_temperature": "275",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"hot_plate_temp": "105",
|
||||
@@ -54,6 +54,30 @@
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle"
|
||||
"Prusa XL 0.8 nozzle",
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
]
|
||||
}
|
||||
|
||||
+4
-4
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PC-CF @CORE One 0.6",
|
||||
"inherits": "Prusament PC-CF @CORE One",
|
||||
"name": "Prusament PC Blend Carbon Fiber @CORE One 0.6",
|
||||
"renamed_from": "Prusament PC-CF CORE One 0.6;Prusament PC-CF @CORE One 0.6",
|
||||
"inherits": "Prusament PC Blend Carbon Fiber @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "DYPBEKeKBdTenG3S",
|
||||
"filament_id": "OFjz0a3m",
|
||||
"setting_id": "Gsq4L4tYlg0j2waT",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle",
|
||||
+4
-4
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PC-CF @CORE One 0.8",
|
||||
"inherits": "Prusament PC-CF @CORE One",
|
||||
"name": "Prusament PC Blend Carbon Fiber @CORE One 0.8",
|
||||
"renamed_from": "Prusament PC-CF CORE One 0.8;Prusament PC-CF @CORE One 0.8",
|
||||
"inherits": "Prusament PC Blend Carbon Fiber @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "0J8ZuIRTB6EgSke8",
|
||||
"filament_id": "OFjz0a3m",
|
||||
"setting_id": "9xRQMlnH6yEd960F",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle",
|
||||
+10
-5
@@ -1,10 +1,11 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PC-CF @CORE One",
|
||||
"name": "Prusament PC Blend Carbon Fiber @CORE One",
|
||||
"renamed_from": "Prusament PC-CF CORE One;Prusament PC-CF @CORE One MMU3;Prusament PC-CF CORE One MMU3;Prusament PC-CF @CORE One",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "IK6Z7DVevvmR96Or",
|
||||
"filament_id": "OFjz0a3m",
|
||||
"setting_id": "B8Cm9l8i9osp5J2q",
|
||||
"filament_id": "OFdO6vpt",
|
||||
"instantiation": "true",
|
||||
"chamber_temperature": [
|
||||
"40"
|
||||
@@ -18,7 +19,11 @@
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One HF 0.4 nozzle",
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
"Prusa CORE One HF 0.5 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"15"
|
||||
@@ -75,7 +80,7 @@
|
||||
"110"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
"150"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"285"
|
||||
+57
-26
@@ -1,18 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PC-CF @XL 5T",
|
||||
"name": "Prusament PC Blend Carbon Fiber @XL",
|
||||
"renamed_from": "Prusament PC-CF XL;Prusament PC-CF @XL 5T;Prusament PC-CF XL 5T;Prusament PC-CF @XL",
|
||||
"inherits": "fdm_filament_pccf",
|
||||
"from": "system",
|
||||
"setting_id": "m1YND6uz3GWeVIBG",
|
||||
"filament_id": "OFjz0a3m",
|
||||
"setting_id": "kEl0d9cAhfqIdihm",
|
||||
"filament_id": "OFdO6vpt",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"nozzle_temperature_intial_layer": "285",
|
||||
"nozzle_temperature": "285",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"hot_plate_temp": "105",
|
||||
"nozzle_temperature": [
|
||||
"285"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.04"
|
||||
],
|
||||
@@ -37,16 +43,46 @@
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_loading_speed_start": "19",
|
||||
"filament_loading_speed": "14",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "20",
|
||||
"filament_cooling_moves": "5",
|
||||
"filament_cooling_initial_speed": "10",
|
||||
"filament_cooling_final_speed": "50",
|
||||
"filament_retract_lift_below": "1.5",
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
"filament_loading_speed_start": [
|
||||
"19"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"14"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 0.25 nozzle",
|
||||
"Prusa XL 0.3 nozzle",
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle",
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
@@ -60,15 +96,10 @@
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"285"
|
||||
]
|
||||
}
|
||||
@@ -1,54 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PC-CF @CORE One MMU3",
|
||||
"inherits": "Prusament PC-CF @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "hTcuccoINAUJ4PfR",
|
||||
"filament_id": "OFjz0a3m",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"3"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"26.5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n\nM142 S45 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"150"
|
||||
]
|
||||
}
|
||||
@@ -1,59 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PC-CF @XL",
|
||||
"inherits": "fdm_filament_pccf",
|
||||
"from": "system",
|
||||
"setting_id": "Eq5x2CcEUUAZ5aof",
|
||||
"filament_id": "OFjz0a3m",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"nozzle_temperature_intial_layer": "285",
|
||||
"nozzle_temperature": "285",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"hot_plate_temp": "105",
|
||||
"filament_flow_ratio": [
|
||||
"1.04"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_loading_speed_start": "19",
|
||||
"filament_loading_speed": "14",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "20",
|
||||
"filament_cooling_moves": "5",
|
||||
"filament_cooling_initial_speed": "10",
|
||||
"filament_cooling_final_speed": "50",
|
||||
"filament_retract_lift_below": "1.5",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 0.25 nozzle",
|
||||
"Prusa XL 0.3 nozzle",
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,54 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PETG @CORE One MMU3",
|
||||
"inherits": "Prusament PETG @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "ypQNV38FrfRu9QSd",
|
||||
"filament_id": "OFkR8E2c",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"3"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"26.5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.053{elsif nozzle_diameter[filament_extruder_id]==0.5}0.042{elsif nozzle_diameter[filament_extruder_id]==0.6}0.032{elsif nozzle_diameter[filament_extruder_id]==0.8}0.018{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
]
|
||||
}
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PETG @CORE One",
|
||||
"renamed_from": "Prusament PETG CORE One;Prusament PETG @CORE One MMU3;Prusament PETG CORE One MMU3",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "LSvba9ds3XTwDMCG",
|
||||
@@ -16,7 +17,11 @@
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"25"
|
||||
|
||||
@@ -0,0 +1,125 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PETG @Prusa CORE One INDX",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "2viuOmBvXuQm2FwV",
|
||||
"filament_id": "OFkR8E2c",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_notes": [
|
||||
"\nPrusa INDX 2.5.10 tuning."
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"9"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"5"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"25"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
"#FF8000"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"85"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"65"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.6"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"20"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"1"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"35"
|
||||
],
|
||||
"chamber_minimal_temperature": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"1.6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One INDX 4T HF 0.4 nozzle",
|
||||
"Prusa CORE One INDX 8T HF 0.4 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"85"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive High Flow"
|
||||
]
|
||||
}
|
||||
@@ -1,71 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PETG @XL 5T",
|
||||
"inherits": "Prusament PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "USigpRWuzpdkT6ZW",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_intial_layer": "240",
|
||||
"nozzle_temperature": "250",
|
||||
"hot_plate_temp_initial_layer": "80",
|
||||
"hot_plate_temp": "80",
|
||||
"full_fan_speed_layer": "5",
|
||||
"slow_down_min_speed": "15",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9.5"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"9"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"50"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_loading_speed_start": "50",
|
||||
"filament_loading_speed": "10",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "100",
|
||||
"filament_cooling_moves": "3",
|
||||
"filament_cooling_initial_speed": "5",
|
||||
"filament_cooling_final_speed": "2.5",
|
||||
"filament_retract_lift_below": "1.5",
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_wipe": "1",
|
||||
"filament_retract_before_wipe": "20%",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PETG @XL",
|
||||
"renamed_from": "Prusament PETG XL;Prusament PETG @XL 5T;Prusament PETG XL 5T",
|
||||
"inherits": "Prusament PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "vPPD8EkKFy5j8pg5",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_intial_layer": "240",
|
||||
"nozzle_temperature": "250",
|
||||
"hot_plate_temp_initial_layer": "80",
|
||||
"hot_plate_temp": "80",
|
||||
@@ -51,6 +51,30 @@
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle"
|
||||
"Prusa XL 0.8 nozzle",
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,54 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PLA @CORE One MMU3",
|
||||
"inherits": "Prusament PLA @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "HSqoQhcjRqpny2g2",
|
||||
"filament_id": "OFnO4wnf",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"30"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"170"
|
||||
]
|
||||
}
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PLA @CORE One",
|
||||
"renamed_from": "Prusament PLA CORE One;Prusament PLA @CORE One MMU3;Prusament PLA CORE One MMU3",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "PuujUMjNKLZvZNAH",
|
||||
@@ -17,7 +18,11 @@
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One L 0.4 nozzle"
|
||||
"Prusa CORE One L 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
@@ -80,7 +85,7 @@
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"150"
|
||||
"170"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
|
||||
@@ -0,0 +1,125 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PLA @Prusa CORE One INDX",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "B2UB9QUbbjpn12Ka",
|
||||
"filament_id": "OFnO4wnf",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_cost": [
|
||||
"27.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_notes": [
|
||||
"\nPrusa INDX 2.5.10 tuning."
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"9"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
"#FF8000"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.8"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"20"
|
||||
],
|
||||
"chamber_minimal_temperature": [
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retract_length_toolchange": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One INDX 4T HF 0.4 nozzle",
|
||||
"Prusa CORE One INDX 8T HF 0.4 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.038"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive High Flow"
|
||||
]
|
||||
}
|
||||
@@ -1,66 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PLA @XL 5T",
|
||||
"inherits": "Prusament PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "3xyT73BMaAvbb1Ej",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_intial_layer": "215",
|
||||
"nozzle_temperature": "215",
|
||||
"hot_plate_temp_initial_layer": "60",
|
||||
"hot_plate_temp": "60",
|
||||
"full_fan_speed_layer": "3",
|
||||
"slow_down_min_speed": "15",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_loading_speed_start": "50",
|
||||
"filament_loading_speed": "10",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "100",
|
||||
"filament_cooling_moves": "2",
|
||||
"filament_cooling_initial_speed": "10",
|
||||
"filament_cooling_final_speed": "3.5",
|
||||
"filament_retract_lift_below": "0.6",
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PLA @XL",
|
||||
"renamed_from": "Prusament PLA XL;Prusament PLA @XL 5T;Prusament PLA XL 5T",
|
||||
"inherits": "Prusament PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "PlHq1KqHrreo5W8m",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_intial_layer": "215",
|
||||
"nozzle_temperature": "215",
|
||||
"hot_plate_temp_initial_layer": "60",
|
||||
"hot_plate_temp": "60",
|
||||
@@ -46,6 +46,30 @@
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle"
|
||||
"Prusa XL 0.8 nozzle",
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,57 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PVB @CORE One MMU3",
|
||||
"inherits": "Prusament PVB @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "IXUO4uCgUY1p5jIo",
|
||||
"filament_id": "OFh7mvPO",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"30"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"170"
|
||||
]
|
||||
}
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PVB @CORE One",
|
||||
"renamed_from": "Prusament PVB CORE One;Prusament PVB @CORE One MMU3;Prusament PVB CORE One MMU3",
|
||||
"inherits": "fdm_filament_pvb",
|
||||
"from": "system",
|
||||
"setting_id": "085dGkrnPhatF07x",
|
||||
@@ -18,7 +19,11 @@
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One HF 0.4 nozzle",
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
"Prusa CORE One HF 0.5 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
@@ -48,7 +53,7 @@
|
||||
"8"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
@@ -81,7 +86,7 @@
|
||||
"75"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"150"
|
||||
"170"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215"
|
||||
|
||||
@@ -1,75 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PVB @XL 5T",
|
||||
"inherits": "fdm_filament_pvb",
|
||||
"from": "system",
|
||||
"setting_id": "DIrPylH6rmu6YA43",
|
||||
"filament_id": "OFh7mvPO",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"nozzle_temperature_intial_layer": "215",
|
||||
"nozzle_temperature": "215",
|
||||
"hot_plate_temp_initial_layer": "75",
|
||||
"hot_plate_temp": "75",
|
||||
"slow_down_min_speed": "15",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"filament_loading_speed_start": "50",
|
||||
"filament_loading_speed": "10",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "100",
|
||||
"filament_cooling_moves": "2",
|
||||
"filament_cooling_initial_speed": "10",
|
||||
"filament_cooling_final_speed": "3.5",
|
||||
"filament_retract_lift_below": "0.6",
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament PVB @XL",
|
||||
"renamed_from": "Prusament PVB XL;Prusament PVB @XL 5T;Prusament PVB XL 5T",
|
||||
"inherits": "fdm_filament_pvb",
|
||||
"from": "system",
|
||||
"setting_id": "RF55nfxQwqUqe00Q",
|
||||
@@ -9,7 +10,6 @@
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"nozzle_temperature_intial_layer": "215",
|
||||
"nozzle_temperature": "215",
|
||||
"hot_plate_temp_initial_layer": "75",
|
||||
"hot_plate_temp": "75",
|
||||
@@ -55,6 +55,30 @@
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle"
|
||||
"Prusa XL 0.8 nozzle",
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,54 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament rPLA @CORE One MMU3",
|
||||
"inherits": "Prusament rPLA @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "n0gSFPBaa7PQ1Y1x",
|
||||
"filament_id": "OFWRITFw",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"30"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"170"
|
||||
]
|
||||
}
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusament rPLA @CORE One",
|
||||
"renamed_from": "Prusament rPLA CORE One;Prusament rPLA @CORE One MMU3;Prusament rPLA CORE One MMU3",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "Bw6H4vFnq7YExyLd",
|
||||
@@ -18,7 +19,11 @@
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One HF 0.4 nozzle",
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
"Prusa CORE One HF 0.5 nozzle",
|
||||
"Prusa CORE One MMU3 0.4 nozzle",
|
||||
"Prusa CORE One MMU3 0.25 nozzle",
|
||||
"Prusa CORE One MMU3 0.3 nozzle",
|
||||
"Prusa CORE One MMU3 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
@@ -81,7 +86,7 @@
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"150"
|
||||
"170"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205"
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user