From d9dfb170436cb8013da1fc64cbb4173ee14060d1 Mon Sep 17 00:00:00 2001 From: OrcaSlicerBot Date: Sun, 18 Jan 2026 14:44:37 +0000 Subject: [PATCH] Updated Wiki content --- calibration/Calibration.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/calibration/Calibration.md b/calibration/Calibration.md index a798d8b..03fed0c 100644 --- a/calibration/Calibration.md +++ b/calibration/Calibration.md @@ -18,7 +18,7 @@ The recommended order for calibration is as follows: 2. **[Max Volumetric Speed](volumetric-speed-calib):** Calibrate the maximum volumetric speed of the filament. This is important for ensuring that the printer can handle the flow rate of the filament without causing issues like under-extrusion. mvf_measurement_point 3. **[Pressure Advance](pressure-advance-calib):** Calibrate the pressure advance settings to improve print quality and reduce artifacts caused by pressure fluctuations in the nozzle. - - **[Adaptive Pressure Advance](adaptive-pressure-advance-calib):** This is an advanced calibration technique that can be used to further optimize the pressure advance settings for different print speeds and geometries. + - **[Adaptive Pressure Advance](adaptive-pressure-advance-calib):** This is an advanced calibration technique that can be used to further optimize the pressure advance settings for different print speeds and geometries. pa-tower 4. **[Flow](flow-rate-calib):** Calibrate the flow rate to ensure that the correct amount of filament is being extruded. This is important for achieving accurate dimensions and good layer adhesion. flowcalibration-example