From 9c0c1841540009bcbc5b1c511d9e4b5dd08882eb Mon Sep 17 00:00:00 2001 From: OrcaSlicerBot Date: Wed, 8 Apr 2026 16:00:14 +0000 Subject: [PATCH] Updated Wiki content --- calibration/adaptive_pressure_advance_calib.md | 2 +- home.md | 2 +- print_settings/speed/speed_settings_jerk_xy.md | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/calibration/adaptive_pressure_advance_calib.md b/calibration/adaptive_pressure_advance_calib.md index d412087..22b8b4e 100644 --- a/calibration/adaptive_pressure_advance_calib.md +++ b/calibration/adaptive_pressure_advance_calib.md @@ -149,7 +149,7 @@ PA pattern calibration configuration window have been changed to simplify test s Test patterns generated for each acceleration-speed pair and all parameters are set accordingly. No additional actions needed from user side. Just slice and print all plates generated. -Refer to [Calibration Guide](calibration) for more details on batch mode calibration. +Refer to [Calibration Guide](calibration_guide) for more details on batch mode calibration. #### OrcaSlicer 2.2.0 and older diff --git a/home.md b/home.md index 286e1aa..887bb52 100644 --- a/home.md +++ b/home.md @@ -185,7 +185,7 @@ OrcaSlicer is a powerful open source slicer for FFF (FDM) 3D Printers. This wiki ## Calibrations -tab_calibration_active The [Calibration Guide](calibration) outlines Orca’s key calibration tests and their suggested order of execution. +tab_calibration_active The [Calibration Guide](calibration_guide) outlines Orca’s key calibration tests and their suggested order of execution. - [param_extruder_temp Temperature](temp_calib) - [param_volumetric_speed Volumetric Speed](volumetric_speed_calib) diff --git a/print_settings/speed/speed_settings_jerk_xy.md b/print_settings/speed/speed_settings_jerk_xy.md index 89e8e17..a500a6b 100644 --- a/print_settings/speed/speed_settings_jerk_xy.md +++ b/print_settings/speed/speed_settings_jerk_xy.md @@ -24,7 +24,7 @@ This setting overrides firmware jerk values when different motion types need spe > [!TIP] > Jerk can work in conjunction with [Pressure Advance](pressure_advance_calib), [Adaptive Pressure Advance](adaptive_pressure_advance_calib), and [Input Shaping](input_shaping_calib) to optimize print quality and speed. -> It's recommended to follow the [calibration guide](calibration) order for best results. +> It's recommended to follow the [calibration guide](calibration_guide) order for best results. - [Cornering Control Types](#cornering-control-types) - [Key Effects](#key-effects)