diff --git a/calibration/adaptive_pressure_advance_calib.md b/calibration/adaptive_pressure_advance_calib.md
index d412087..22b8b4e 100644
--- a/calibration/adaptive_pressure_advance_calib.md
+++ b/calibration/adaptive_pressure_advance_calib.md
@@ -149,7 +149,7 @@ PA pattern calibration configuration window have been changed to simplify test s
 
 Test patterns generated for each acceleration-speed pair and all parameters are set accordingly. No additional actions needed from user side. Just slice and print all plates generated.
 
-Refer to [Calibration Guide](calibration) for more details on batch mode calibration.
+Refer to [Calibration Guide](calibration_guide) for more details on batch mode calibration.
 
 #### OrcaSlicer 2.2.0 and older
 
diff --git a/home.md b/home.md
index 286e1aa..887bb52 100644
--- a/home.md
+++ b/home.md
@@ -185,7 +185,7 @@ OrcaSlicer is a powerful open source slicer for FFF (FDM) 3D Printers. This wiki
 
 ## Calibrations
 
-<img alt="tab_calibration_active" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/tab_calibration_active.svg?raw=true" height="22"> The [Calibration Guide](calibration) outlines Orca’s key calibration tests and their suggested order of execution.
+<img alt="tab_calibration_active" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/tab_calibration_active.svg?raw=true" height="22"> The [Calibration Guide](calibration_guide) outlines Orca’s key calibration tests and their suggested order of execution.
 
 - [<img alt="param_extruder_temp" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_extruder_temp.svg?raw=true" height="22"> Temperature](temp_calib)
 - [<img alt="param_volumetric_speed" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_volumetric_speed.svg?raw=true" height="22"> Volumetric Speed](volumetric_speed_calib)
diff --git a/print_settings/speed/speed_settings_jerk_xy.md b/print_settings/speed/speed_settings_jerk_xy.md
index 89e8e17..a500a6b 100644
--- a/print_settings/speed/speed_settings_jerk_xy.md
+++ b/print_settings/speed/speed_settings_jerk_xy.md
@@ -24,7 +24,7 @@ This setting overrides firmware jerk values when different motion types need spe
 
 > [!TIP]
 > Jerk can work in conjunction with [Pressure Advance](pressure_advance_calib), [Adaptive Pressure Advance](adaptive_pressure_advance_calib), and [Input Shaping](input_shaping_calib) to optimize print quality and speed.  
-> It's recommended to follow the [calibration guide](calibration) order for best results.
+> It's recommended to follow the [calibration guide](calibration_guide) order for best results.
 
 - [Cornering Control Types](#cornering-control-types)
 - [Key Effects](#key-effects)