juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-20 20:03:47 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated Wiki content

OrcaSlicerBot
2026-04-24 14:16:20 +00:00
parent 81dc2f0ed1
commit 2cfcdf8852
1 changed files with 10 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files

19
calibration/flow_ratio_calib.md

@@ -6,17 +6,18 @@ A properly calibrated flow ratio ensures consistent layer adhesion and accurate
- Too **low** flow ratio causes under-extrusion, which leads to gaps, weak layers, and poor structural integrity. - Too **low** flow ratio causes under-extrusion, which leads to gaps, weak layers, and poor structural integrity.
- Too **high** flow ratio causes over-extrusion, resulting in excess material, rough surfaces, and dimensional inaccuracies. - Too **high** flow ratio causes over-extrusion, resulting in excess material, rough surfaces, and dimensional inaccuracies.
- [Calibration Types](#calibration-types)
- [OrcaSlicer \> 2.3.0 Archimedean chords + YOLO (Recommended)](#orcaslicer--230-archimedean-chords--yolo-recommended)
- [OrcaSlicer \<= 2.3.0 Monotonic Line + 2-Pass Calibration](#orcaslicer--230-monotonic-line--2-pass-calibration)
- [Credits](#credits)
> [!WARNING] > [!WARNING]
> **BambuLab Printers:** Make sure you do **not** select the 'Flow calibration' option. > **BambuLab Printers:** Make sure you do **not** select the 'Flow calibration' option.
> ![flowrate-Bambulab-uncheck](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/Flow-Rate/flowrate-Bambulab-uncheck.png?raw=true) > ![flowrate-Bambulab-uncheck](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/Flow-Rate/flowrate-Bambulab-uncheck.png?raw=true)
> [!NOTE] > [!IMPORTANT]
> After v2.3.0, the [Top Pattern](strength_settings_top_bottom_shells#surface-pattern) changed to [Archimedean chords](strength_settings_patterns#archimedean-chords) from [Monotonic Line](strength_settings_patterns#monotonic-line). > NEW FEATURE: **Selectable pattern (Monotonic line)**
> Available in: Releases greater than **2.3.2** or [Nightly builds](https://github.com/OrcaSlicer/OrcaSlicer/releases/tag/nightly-builds).
- [Calibration Types](#calibration-types)
- [Archimedean chords + YOLO (Recommended)](#archimedean-chords--yolo-recommended)
- [Monotonic Line + 2-Pass Calibration](#monotonic-line--2-pass-calibration)
- [Credits](#credits)
## Calibration Types ## Calibration Types
@@ -25,7 +26,7 @@ A properly calibrated flow ratio ensures consistent layer adhesion and accurate
- **Perfectionist:** calibration range `[-0.04, +0.035]`, flow ratio step `0.005`. - **Perfectionist:** calibration range `[-0.04, +0.035]`, flow ratio step `0.005`.
- **2-Pass Calibration:** the legacy method, using two passes to determine the optimal flow ratio with the formula `OldFlowRatio * (100 + modifier) / 100`. - **2-Pass Calibration:** the legacy method, using two passes to determine the optimal flow ratio with the formula `OldFlowRatio * (100 + modifier) / 100`.
### OrcaSlicer > 2.3.0 Archimedean chords + YOLO (Recommended) ### Archimedean chords + YOLO (Recommended)
This method uses the [Archimedean Chords](strength_settings_patterns#archimedean-chords) pattern for flow ratio calibration with the YOLO (Recommended) approach. This method uses the [Archimedean Chords](strength_settings_patterns#archimedean-chords) pattern for flow ratio calibration with the YOLO (Recommended) approach.
@@ -49,7 +50,7 @@ This method uses the [Archimedean Chords](strength_settings_patterns#archimedean
> [!NOTE] > [!NOTE]
> The new Archimedean chords pattern uses a specific print order that prints the inner spiral last so you can check for material accumulation on the contact line at the end. > The new Archimedean chords pattern uses a specific print order that prints the inner spiral last so you can check for material accumulation on the contact line at the end.
### OrcaSlicer <= 2.3.0 Monotonic Line + 2-Pass Calibration ### Monotonic Line + 2-Pass Calibration
This example uses the Monotonic Line pattern with the 2-Pass Calibration approach. This example uses the Monotonic Line pattern with the 2-Pass Calibration approach.