From 09b3620c83bf2083aa07eacb5a4ab530c09eafb2 Mon Sep 17 00:00:00 2001 From: OrcaSlicerBot Date: Tue, 3 Feb 2026 12:46:53 +0000 Subject: [PATCH] Updated Wiki content --- calibration/vfa-calib.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/calibration/vfa-calib.md b/calibration/vfa-calib.md index ebdac84..b3688c5 100644 --- a/calibration/vfa-calib.md +++ b/calibration/vfa-calib.md @@ -17,9 +17,9 @@ The VFA Speed Test in OrcaSlicer helps identify which print speeds trigger MRR a - **Step:**: Define the speed increment between each section of the tower (e.g., 10 mm/s). 2. Check that Max Volumetric Speed is not limiting your speeds for this material. If it is, use a higher Volumetric Speed Material or recreate the test with a lower max speed. 3. Print the VFA test: - ![vfa_test_print](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/vfa/vfa_test_print.jpg?raw=true) + ![vfa_test_speed_check](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/vfa/vfa_test_speed_check.png?raw=true) 4. Inspect the tower for MRR artifacts. Look for speeds where the surface becomes visibly smoother or rougher. This allows you to pinpoint problematic speed ranges. In this example, you can see how the Speed is Capping at 162 mm/s. - ![vfa_test_speed_check](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/vfa/vfa_test_speed_check.png?raw=true) + ![vfa_test_print](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/vfa/vfa_test_print.jpg?raw=true) 5. Configure the [Resonance Avoidance Speed Range](printer_motion_ability#resonance-avoidance-speed) in the printer profile to skip speeds that cause visible artifacts. ![vfa_resonance_avoidance](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/vfa/vfa_resonance_avoidance.png?raw=true)