9ae20024aa
* Update quality_settings_wall_generator.md * Expand layer height wiki * Rework height * Update quality_settings_line_width.md * Update quality_settings_precision.md * Update quality_settings_seam.md * Minor linking * Update quality_settings_wall_and_surfaces.md * Reverse on odd improved * Extra perimeter on overhangs * Images fixes * Update speed_settings_jerk_xy.md * quality_settings_ironing * Update quality_settings_seam.md * Update quality_settings_bridging.md * Remove precision sub-section links * Add icons to settings links in Home documentation * Moved fuzzy skin Remove Fuzzy Skin section from special mode settings to it's own place. * Fix image adaptive-pressure-advance-calib.md * Update image references Standardized image alt text and filenames for consistency and clarity. * Update image alt text and file references in docs Standardized and clarified image alt text in Calibration.md for easy md to html conversion. * Update seam * Base scarf joint seam * Update quality_settings_seam.md * Update quality_settings_wall_generator.md * Update quality_settings_overhangs.md * Fuzzy Skin Generator Mode Wiki Co-Authored-By: π² <189209038+pi-squared-studio@users.noreply.github.com> * Infill Templates Wiki Co-Authored-By: π² <189209038+pi-squared-studio@users.noreply.github.com> * basic md formating * Update infill and advanced strength settings docs * Moved + Linked Metalanguage * image preview (change befor ready) * Update strength_settings_infill_rotation_template_metalanguage.md * reorder image description * Some credits * Spelling infill rotation metalanguage docs * Crop metalanguage fills * fix image reference * Update strength_settings_infill_rotation_template_metalanguage.md * Update strength_settings_infill_rotation_template_metalanguage.md * standard characters images * flow rate update division * Update Tab.cpp * Reworking flow rate calibration guide * Update strength_settings_top_bottom_shells.md * Flow Calib WIP --------- Co-authored-by: π² <189209038+pi-squared-studio@users.noreply.github.com> Co-authored-by: pi-squared-studio <pi.squared.studio@gmail.com>
2.0 KiB
Filament Tolerance Calibration
Each filament and printer combination can result in different tolerances. This means that even using the same filament and print profile, tolerances may vary from one printer to another. To correct for these variations, Orca Slicer provides:
-
Filament Compensation:
-
Shrinkage (XY)
-
-
Process Compensation:
-
X-Y hole compensation
-
X-Y contour compensation
-
Precise wall
-
Precise Z height
-
Handy Models
Orca Slicer includes several handy models to help you test and calibrate your printer.
Right-click on your plate in Prepare mode and select "Add Handy Model" to access these models.
Orca Tolerance Test
This calibration test is designed to evaluate the dimensional accuracy of your printer and filament. The model consists of a base with six hexagonal holes, each with a different tolerance: 0.0 mm, 0.05 mm, 0.1 mm, 0.2 mm, 0.3 mm, and 0.4 mm, as well as a hexagon-shaped tester.
You can check the tolerance using either an M6 Allen key or the included printed hexagon tester. Use calipers to measure both the holes and the inner tester. Based on your results, you can fine-tune the X-Y hole compensation and X-Y contour compensation settings. Repeat the process until you achieve the desired precision.
