mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-01 14:27:00 +00:00
f7c1b290fd
Every remaining legacy filament_id outside the BBL/QD_* islands re-derives from its product triple (filament_vendor / filament_type / family name), completing the content-addressed id model of filament_id_plan_v3.md: - Relocation pre-step: 14 fdm_filament_* template forks (Cubicon x3, Prusa x6, RH3D x6 minus the pc fork already re-homed) stop declaring ids; the 16 presets that rode Prusa's forks now declare the id they already resolved (verified zero effective-id drift over all 5892 instantiated presets). - --drop-redundant-ids: 6 Custom/MyToolChanger generics drop copied GF ids and ride their OFL families. - --remint over all 62 non-island vendors: 2647 declarations re-derived; identical products converge cross-bundle (showcase: PolyLite PLA is now OF5CgdDq in OrcaFilamentLibrary, Qidi, OrcaArena and Snapmaker). - Prusament @XL completions surfaced by the relocation: filament_vendor ["Prusa Polymers"] on the 8 @XL declarers; Prusament PA-CF typed PA11-CF (the product is Prusament PA11CF) and PC-CF typed PC-CF (-CF family typed as base polymer); each family converges on one id. - Succession: 331 ids retired with mode-rule successors, 355 never-shipped v1 mints forgotten with chain splicing, 151 GF-shaped ids released to the island space with hints, 27 curated BBL-generic -> OFL-generic hints (GFL99 -> OFDSrzZ8 class). New --retire "OLD=NEW" maintenance mode records lineage for OGFC99/OGFG99/OGFN99 (the shipped ids of OFL's Generic PC/PETG/PA in released versions, whose claims migrated in v3.1 while Cubicon's inert fork declarations kept them alive). - Retiring the P-hex system ids removes the last system ids from check_ams_filament_valid's destructive P-gate. - AMS-ambiguity fixes surfaced by convergence (validator -f): 4 presets riding another family's id through inherits now declare their true family id (Elegoo Generic ASA-CF/PETG-CF, Snapmaker PolyLite Dual PLA / PolyLite J1 PLA); 9 Cubicon @base presets and Dremel Generic PLA, which duplicate their per-printer variants on the same printers, split onto the salt-1 iteration of their triple (sanctioned by the mint-conformance check; --remint now leaves salt-conformant declarations alone). Gates: assign_filament_ids --check 0; orca_extra_profile_check 0; 116 python unit tests; config-equivalence over all 5892 instantiated presets (byte-identical configs except the 14 sanctioned Prusament vendor/type corrections; setting_id and compatible_printers unchanged; per-family convergence and ledger conservation verified); profile validator base/-f/-r(BBL)/-r(Qidi) all green; libslic3r_tests 48610 assertions; Moonraker OFL generic map check; custom-preset fixture archives v1.9.0-v2.4.1.
96 lines
1.6 KiB
JSON
96 lines
1.6 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Flashforge Generic PETG",
|
|
"inherits": "fdm_filament_pet",
|
|
"from": "system",
|
|
"setting_id": "YqiSgA018CdflfT9",
|
|
"filament_id": "OFZHgTVI",
|
|
"instantiation": "true",
|
|
"filament_flow_ratio": [
|
|
"1"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"12"
|
|
],
|
|
"temperature_vitrification": [
|
|
"70"
|
|
],
|
|
"hot_plate_temp_initial_layer": [
|
|
"70"
|
|
],
|
|
"hot_plate_temp": [
|
|
"70"
|
|
],
|
|
"close_fan_the_first_x_layers": [
|
|
"1"
|
|
],
|
|
"slow_down_min_speed": [
|
|
"30"
|
|
],
|
|
"overhang_fan_speed": [
|
|
"80"
|
|
],
|
|
"support_material_interface_fan_speed": [
|
|
"90"
|
|
],
|
|
"additional_cooling_fan_speed": [
|
|
"50"
|
|
],
|
|
"filament_start_gcode": [
|
|
"; filament start gcode \n;right_extruder_material:PETG"
|
|
],
|
|
"filament_end_gcode": [
|
|
"; filament end gcode\n"
|
|
],
|
|
"filament_diameter": [
|
|
"1.75"
|
|
],
|
|
"enable_pressure_advance": [
|
|
"1"
|
|
],
|
|
"pressure_advance": [
|
|
"0.046"
|
|
],
|
|
"filament_density": [
|
|
"1.27"
|
|
],
|
|
"nozzle_temperature_range_low": [
|
|
"220"
|
|
],
|
|
"nozzle_temperature_range_high": [
|
|
"260"
|
|
],
|
|
"nozzle_temperature_initial_layer": [
|
|
"255"
|
|
],
|
|
"nozzle_temperature": [
|
|
"255"
|
|
],
|
|
"fan_cooling_layer_time": [
|
|
"30"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"8"
|
|
],
|
|
"fan_max_speed": [
|
|
"100"
|
|
],
|
|
"fan_min_speed": [
|
|
"80"
|
|
],
|
|
"overhang_fan_threshold": [
|
|
"25%"
|
|
],
|
|
"compatible_printers": [
|
|
"Flashforge Adventurer 5M 0.4 Nozzle",
|
|
"Flashforge Adventurer 5M 0.6 Nozzle",
|
|
"Flashforge Adventurer 5M 0.8 Nozzle",
|
|
"Flashforge Adventurer 5M Pro 0.4 Nozzle",
|
|
"Flashforge Adventurer 5M Pro 0.6 Nozzle",
|
|
"Flashforge Adventurer 5M Pro 0.8 Nozzle",
|
|
"Flashforge AD5X 0.4 nozzle",
|
|
"Flashforge AD5X 0.6 nozzle",
|
|
"Flashforge AD5X 0.8 nozzle"
|
|
]
|
|
}
|