mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-03 07:16:52 +00:00
f7c1b290fd
Every remaining legacy filament_id outside the BBL/QD_* islands re-derives from its product triple (filament_vendor / filament_type / family name), completing the content-addressed id model of filament_id_plan_v3.md: - Relocation pre-step: 14 fdm_filament_* template forks (Cubicon x3, Prusa x6, RH3D x6 minus the pc fork already re-homed) stop declaring ids; the 16 presets that rode Prusa's forks now declare the id they already resolved (verified zero effective-id drift over all 5892 instantiated presets). - --drop-redundant-ids: 6 Custom/MyToolChanger generics drop copied GF ids and ride their OFL families. - --remint over all 62 non-island vendors: 2647 declarations re-derived; identical products converge cross-bundle (showcase: PolyLite PLA is now OF5CgdDq in OrcaFilamentLibrary, Qidi, OrcaArena and Snapmaker). - Prusament @XL completions surfaced by the relocation: filament_vendor ["Prusa Polymers"] on the 8 @XL declarers; Prusament PA-CF typed PA11-CF (the product is Prusament PA11CF) and PC-CF typed PC-CF (-CF family typed as base polymer); each family converges on one id. - Succession: 331 ids retired with mode-rule successors, 355 never-shipped v1 mints forgotten with chain splicing, 151 GF-shaped ids released to the island space with hints, 27 curated BBL-generic -> OFL-generic hints (GFL99 -> OFDSrzZ8 class). New --retire "OLD=NEW" maintenance mode records lineage for OGFC99/OGFG99/OGFN99 (the shipped ids of OFL's Generic PC/PETG/PA in released versions, whose claims migrated in v3.1 while Cubicon's inert fork declarations kept them alive). - Retiring the P-hex system ids removes the last system ids from check_ams_filament_valid's destructive P-gate. - AMS-ambiguity fixes surfaced by convergence (validator -f): 4 presets riding another family's id through inherits now declare their true family id (Elegoo Generic ASA-CF/PETG-CF, Snapmaker PolyLite Dual PLA / PolyLite J1 PLA); 9 Cubicon @base presets and Dremel Generic PLA, which duplicate their per-printer variants on the same printers, split onto the salt-1 iteration of their triple (sanctioned by the mint-conformance check; --remint now leaves salt-conformant declarations alone). Gates: assign_filament_ids --check 0; orca_extra_profile_check 0; 116 python unit tests; config-equivalence over all 5892 instantiated presets (byte-identical configs except the 14 sanctioned Prusament vendor/type corrections; setting_id and compatible_printers unchanged; per-family convergence and ledger conservation verified); profile validator base/-f/-r(BBL)/-r(Qidi) all green; libslic3r_tests 48610 assertions; Moonraker OFL generic map check; custom-preset fixture archives v1.9.0-v2.4.1.
144 lines
3.7 KiB
JSON
144 lines
3.7 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Generic PLA @Hi-all",
|
|
"inherits": "fdm_filament_pla",
|
|
"from": "system",
|
|
"setting_id": "eza77EPrdoTvZdw7",
|
|
"instantiation": "true",
|
|
"activate_air_filtration": [
|
|
"0"
|
|
],
|
|
"additional_cooling_fan_speed": [
|
|
"0"
|
|
],
|
|
"complete_print_exhaust_fan_speed": [
|
|
"80"
|
|
],
|
|
"during_print_exhaust_fan_speed": [
|
|
"60"
|
|
],
|
|
"eng_plate_temp": [
|
|
"45"
|
|
],
|
|
"eng_plate_temp_initial_layer": [
|
|
"45"
|
|
],
|
|
"filament_cost": [
|
|
"30"
|
|
],
|
|
"filament_density": [
|
|
"1.25"
|
|
],
|
|
"filament_deretraction_speed": [
|
|
"nil"
|
|
],
|
|
"filament_diameter": [
|
|
"1.75"
|
|
],
|
|
"filament_flow_ratio": [
|
|
"0.98"
|
|
],
|
|
"filament_is_support": [
|
|
"0"
|
|
],
|
|
"filament_minimal_purge_on_wipe_tower": [
|
|
"15"
|
|
],
|
|
"filament_retract_before_wipe": [
|
|
"100"
|
|
],
|
|
"filament_retract_restart_extra": [
|
|
"nil"
|
|
],
|
|
"filament_retract_when_changing_layer": [
|
|
"nil"
|
|
],
|
|
"filament_retraction_length": [
|
|
"nil"
|
|
],
|
|
"filament_retraction_minimum_travel": [
|
|
"nil"
|
|
],
|
|
"filament_retraction_speed": [
|
|
"nil"
|
|
],
|
|
"filament_soluble": [
|
|
"0"
|
|
],
|
|
"filament_vendor": [
|
|
"Generic"
|
|
],
|
|
"filament_wipe": [
|
|
"nil"
|
|
],
|
|
"filament_wipe_distance": [
|
|
"nil"
|
|
],
|
|
"filament_z_hop": [
|
|
"nil"
|
|
],
|
|
"filament_z_hop_types": [
|
|
"nil"
|
|
],
|
|
"full_fan_speed_layer": [
|
|
"0"
|
|
],
|
|
"nozzle_temperature_range_high": [
|
|
"240"
|
|
],
|
|
"required_nozzle_HRC": [
|
|
"0"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"8"
|
|
],
|
|
"slow_down_min_speed": [
|
|
"20"
|
|
],
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
|
],
|
|
"filament_end_gcode": [
|
|
"; filament end gcode"
|
|
],
|
|
"activate_chamber_temp_control": "0",
|
|
"chamber_temperature": "0",
|
|
"cool_cds_fan_start_at_height": "0.5",
|
|
"cool_special_cds_fan_speed": "0",
|
|
"default_filament_colour": "\"\"",
|
|
"dont_slow_down_outer_wall": "1",
|
|
"enable_overhang_bridge_fan": "1",
|
|
"enable_pressure_advance": "0",
|
|
"enable_special_area_additional_cooling_fan": "0",
|
|
"epoxy_resin_plate_temp": "60",
|
|
"epoxy_resin_plate_temp_initial_layer": "60",
|
|
"filament_cooling_final_speed": "3.4",
|
|
"filament_cooling_initial_speed": "2.2",
|
|
"filament_cooling_moves": "4",
|
|
"filament_load_time": "0",
|
|
"filament_loading_speed": "28",
|
|
"filament_loading_speed_start": "3",
|
|
"filament_multitool_ramming": "0",
|
|
"filament_multitool_ramming_flow": "10",
|
|
"filament_multitool_ramming_volume": "10",
|
|
"filament_notes": "\"\"",
|
|
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
|
"filament_retract_lift_above": "nil",
|
|
"filament_retract_lift_below": "nil",
|
|
"filament_retract_lift_enforce": "nil",
|
|
"filament_shrink": "100%",
|
|
"filament_toolchange_delay": "0",
|
|
"filament_unload_time": "0",
|
|
"filament_unloading_speed": "90",
|
|
"filament_unloading_speed_start": "100",
|
|
"material_flow_dependent_temperature": "0",
|
|
"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
|
|
"pressure_advance": "0.04",
|
|
"support_material_interface_fan_speed": "-1",
|
|
"compatible_printers": [
|
|
"Creality Hi 0.4 nozzle",
|
|
"Creality Hi 0.6 nozzle",
|
|
"Creality Hi 0.8 nozzle"
|
|
],
|
|
"filament_id": "OFDSrzZ8"
|
|
} |