mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-07-31 14:52:06 +00:00
9a9d87d3ff
* Hide the system filament * Fix: crash when using m_ProfileJson * Bump profile version to 02.02.41.02 * Update: Flutter 1222
37 lines
1.4 KiB
JSON
37 lines
1.4 KiB
JSON
{
|
|
"type": "process",
|
|
"name": "0.08 High Quality @Snapmaker U1 (0.4 nozzle)",
|
|
"inherits": "fdm_process_U1_0.08",
|
|
"from": "system",
|
|
"setting_id": "GP099",
|
|
"instantiation": "true",
|
|
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
|
"default_acceleration": "4000",
|
|
"gap_infill_speed": "210",
|
|
"inner_wall_speed": "120",
|
|
"internal_solid_infill_speed": "150",
|
|
"outer_wall_acceleration": "2000",
|
|
"outer_wall_speed": "60",
|
|
"sparse_infill_pattern": "gyroid",
|
|
"sparse_infill_speed": "150",
|
|
"top_surface_speed": "150",
|
|
"smooth_coefficient": "150",
|
|
"overhang_totally_speed": "50",
|
|
"compatible_printers": [
|
|
"Snapmaker U1 (0.4 nozzle)"
|
|
],
|
|
"ooze_prevention": "1",
|
|
"prime_tower_width": "30",
|
|
"prime_volume": "18",
|
|
"slowdown_for_curled_perimeters": "0",
|
|
"standby_temperature_delta": "-150",
|
|
"wipe_tower_filament": "0",
|
|
"prime_tower_brim_width": "5",
|
|
"wipe_tower_cone_angle": "15",
|
|
"wipe_tower_extra_spacing": "120%",
|
|
"enable_arc_fitting": "0",
|
|
"precise_outer_wall": "0",
|
|
"support_type": "tree(auto)",
|
|
"wipe_tower_extra_rib_length": "8",
|
|
"wipe_tower_wall_type": "rib"
|
|
} |