mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-27 10:51:22 +00:00
SoftFever
f520e9221f
* add orca profile skill * add default material check Improve validation for default materials and filament profiles * Fix default materials and obsolete keys * clarifying orca-profiles skill
37 lines
1.3 KiB
JSON
37 lines
1.3 KiB
JSON
{
|
|
"type": "process",
|
|
"name": "0.08 High Quality @Snapmaker U1 (0.4 nozzle)",
|
|
"inherits": "fdm_process_U1_0.08",
|
|
"from": "system",
|
|
"setting_id": "Bld9ulv0wFza7OCb",
|
|
"instantiation": "true",
|
|
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
|
"default_acceleration": "4000",
|
|
"gap_infill_speed": "210",
|
|
"inner_wall_speed": "120",
|
|
"internal_solid_infill_speed": "150",
|
|
"outer_wall_acceleration": "2000",
|
|
"outer_wall_speed": "60",
|
|
"sparse_infill_pattern": "gyroid",
|
|
"sparse_infill_speed": "150",
|
|
"top_surface_speed": "150",
|
|
"compatible_printers": [
|
|
"Snapmaker U1 (0.4 nozzle)"
|
|
],
|
|
"ooze_prevention": "1",
|
|
"prime_tower_width": "30",
|
|
"prime_volume": "18",
|
|
"slowdown_for_curled_perimeters": "0",
|
|
"standby_temperature_delta": "-150",
|
|
"wipe_tower_filament": "0",
|
|
"prime_tower_brim_width": "5",
|
|
"wipe_tower_cone_angle": "15",
|
|
"wipe_tower_extra_spacing": "120%",
|
|
"enable_arc_fitting": "0",
|
|
"precise_outer_wall": "1",
|
|
"support_type": "tree(auto)",
|
|
"wipe_tower_extra_rib_length": "8",
|
|
"wipe_tower_wall_type": "rib",
|
|
"gap_fill_target": "topbottom"
|
|
}
|